Unable to Transport the Date rules in action condition

Hi Experts,
I am unable to Transport the date rules in the action condition in my actions to the Quality system from development system. the screenshot for development system- and the quality system are attached.
I tried to include the Action condition twice in the transportfrom Development  but somehow the date rule is missing in the
action condition aftre  transpor to the quality systemt.
The date rule has been transmitted sepaartely into the Quality system and is available there. Please help me in this
Thanks,
Rohit

hello
did you get to solve this problem? I'm having the same issue and havent been able to figure it out yet on how to solve it
thanks

Similar Messages

  • Unable to find the Transfer Rules in Transport Connection

    Hi Guys,
    I am on BW 3.5.
    I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
    I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
    Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
    Please help me on how to include this object in the Transport request created.
    Thanks in advance.
    Regards,
    Tyson

    Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
    Cheers,
    shana
    Assigning pts is the way of saying thanks in SDN

  • Unable to load the data into Cube Using DTP in the quality system

    Hi,
    I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
    I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
    Please suggest .
    Thanks,
    Satyaprasad

    Hi,
    Some Infoobjects are missing while collecting the transport.
    I collected those objects and transported ,now its working fine.
    Many Thanks to all
    Regards,
    Satyaprasad

  • HCI error - unable to import the data because the row is duplicated in the master data

    Hi, i am working on HCI while i am mapping the data from ECC to HCI target table i am getting this error :Unable to import the data because the row is duplicated in the master data .Could you please help me how to solve this
    Message was edited by: Mariana Mihaylova

    Moved to Process Integration (PI) & SOA Middleware as per New SAP HANA Cloud Integration (HCI) content category (unfortunately, I can't edit the discussion and add the category as I'm not a moderator in this space). Perhaps Mariana Mihaylova can help.
    Susmitha Yerradhodi please read and follow The SCN Rules of Engagement - in particular, the more details you provide, the better the chances of getting your question answered. (e.g. "HCI" is not a helpful subject)

  • Internal error: Unable to find the access rule.

    I have a Cisco ASA 5550 and using ASDM 6.2.
    Opening the ASDM, in Firewall Dashboard, in Top 10 Access Rules, show the second rule with more hit: "interface X | source: any | Dest: any | Service: ip | Action: Permit.
    During the day, the hits increase and decrease.
    Well, the problem: That rule there isn't.
    When I click with the right mouse button and click on show rule, a message is displayed:
    "Internal error: Unable to find the access rule."
    I can't find the rule in Configuration Mode and in Console Mode.
    Well, the rule there isn't.
    What can I do for this rule disappears from the Top 10 Dashboard?

    I suggest opening a case with Cisco TAC.  This could be an issue with the device itself.
    Please remember to select a correct answer and rate helpful posts

  • Unable to change the data in PSA

    Hello All,
    I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
    Could you please let me know how will i see all columns from PSA. Thanks
    Regards,Ashok

    Hi Ashok,
    To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
    Also if you want to see say all the failed records you can sort the order of the data using the Status column

  • Unable to access the data from Data Management Gateway: Query timeout expired

    Hi,
    Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
    1. The gateway is in running status.
    2. Data source is also in ready status and test connection worked fine too.
    3. Below is the error in System Health -
    Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.        
    Error code: 4025
    4. Below is the error in Event Viewer.
    Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
    5. This is the correlational id for latest refresh failure
    is
    f9030dd8-af4c-4225-8674-50ce85a770d0
    6.
    Refresh History error is –
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
    managed IDataReader interface was being used: Query timeout expired. 
    Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
    Thanks,
    Richa

    Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
    Thanks.

  • Unable to send the data entered in sap portal

    Hi
    All
    i am trying to configure and test  Leave Request  from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
    Please share your valuable thoughts or solutions.Thanks in advance.
    Tanks
    Rafi Shaik

    Hi Rafi,
    We are also facing similar kind of issue.
    When i select type of leave as annual it is giving an error message as
    " Parameter  missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
    But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
    Please let us know how you have solved your issue?
    Thanks.
    -Suresh

  • The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

     We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
      [ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. 
     The PrimeOutput method on ADO NET Source returned error code 0xC02090F5. 
     The component returned a failure code when the pipeline engine called PrimeOutput(). 
    The meaning of the failure code is defined by the component, 
    but the error is fatal and the pipeline stopped executing. 
     There may be error messages posted before this with more 
    information about the failure.
    Anything that we can do to fix this?

    Hi,
      Tried both....
      * Having schema type as Nvarchar(max). - Getting the same error.
      * Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
           [OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
           [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on OLE DB Source returned error code 0xC0202009.  The component returned a failure
    code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the
    failure.
    Additional Info:
       * Here the Source task is getting failed not the conversion or destination task.
    Thanks,
    Loganathan A.

  • Unable to get the data when capture the BOL object infomation.

    Hello All.
    I created a Z component.
    In that component I created one View.
    In that view i have the context node with BOL object  -  BTAdminH
    In configuration also i am selecting the fields.
    But I am unable to capture the data.
    In that i write like
    data: lr_ent type ref to CL_CRM_BOL_ENTITY.
    lr_ent ?= me->typed_context->btadminh->collection_wrapper->get_current( ).
    I write this code in the EDIT button event.
    But lr_ent is not capture any value.
    BTADMINH is there in the CTXT class.
    In debugging GET_CURRENT( ) method
    me->collection_ref->collection
    is not having any value.
    I do not know why it is not having any value.
    When I am using value node it is working fine.
    But when i am using BOL object at that time only it is not getting any value.
    Can anybody give me suggision to solve this problem.
    In stadard it is working fine.
    How it is working in Stadard i did not understand.
    Why it is not working in Z component.
    How we can use BOL objets in Z components.
    Please give me some solution.
    Regards,
    B. Krishna.

    Hi krishna
    Is this a Z component to be used within a  standard component?
    ->then you need to create a usage definition to this component from standard
    ->expose btadminh as public context through component controller
    ->create binding to the standard btadminh through the usage initialize method
    then it should be okay
    If the Z component is standalone , then create Root object BTorder and BTAdminH node should having a hierarchial relationship to this. Initialize BTOrder through cl_crm_bol_core methods.

  • BOFC Unable to start the data source

    Hi there,
    i've done a standalone install using SQL 2008 R2 express. But i'm unable to start the data source and get this error:
    Failed to start data source
    Failed to start server instances on machine DELL1.
    Failed to initialize server configured on machine DELL1.
    Class not registered
    Thanks,
    Anees

    Ok, problem solved.
    I had to create a seperate DCOM user and assign it to the following roles in windows:
    log on as a batch job
    log on as a service
    then assign this DCOM user to the Ctbroker and CTserver. As i'm not running this on a domain, there was no need to use 'packet level authentication'. So i set the authentication level to none.
    There was no need to use the web based admin interface. Ctadmin.msc worked perfectly.
    Thanks,
    Anees

  • Unable to change the data source of SAP system

    Dear all,
    We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
    while installation i have given the central SLD system as solman,
    By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
    Request please let me know how to resolve this issue.
    Thanks
    Paresh

    Hi Paresh,
    You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
    Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!)  to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
    Hope this helps sort out your issue.

  • Unable to find the data source in r/3  ECC 6.0 -  ( 0FI_GL_10 ) in RSA5

    Hi guys,
    I am unable to find the data source(0FI_GL_10) in RSA5.
    Presently I am using BI7.0 version with R/3 ECC 6.0.
    BI Patch level - 16.
    BI content Patch level - 8
    Thanks,
    Gupta

    Hi,
    Try Installing Application Component Hierarchies 
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
    Use RSA9 for this.
    Hope this helps.
    Thanks,
    JituK

  • Excel 2013 PowerPivot Error - "PowerPivot is unable to load the Data Model"

    I'm attempting to use the PowerPivot add-on in Excel.  When clicking 'Manage Data Model' or attempting to 'Load to data model,' I receive the error 'We couldn't load the Data Model.  This may be because the Data Model in this workbook is damaged.',
    followed by 'PowerPivot is unable to load the Data Model.'  This happens irrespective of data source type.  I have Excel 2013 32-bit, PowerPivot 32-bit, running on Windows 7 OS 64-bit.  I am not running an SSAS instance on my machine. 
    Any suggestions?

    Hi
    Have you ever tried to repair your office?
    Also we may refer to the following blog :
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/11/12/powerpivot-for-excel-2013-errors-after-october-update-kb-2825655.aspx
    This issue seems to be caused by the October 2013 update (KB 2825655) for Excel 2013. Try to remove it or restore the system to an earlier point and check the result.
    Regards
    Tylor Wang
    TechNet Community Support

  • Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

    Hi
    I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
    I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
    and
    The File's Properties > Security tab is missing
    Does anyone know my issue?
    Thanks,

    Hi Experts,
    You told its resolved.how?
    I am having the same issue i am unable to retrive the tables.
    "Database:MS SQL Server
    Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
    Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
    Please help if you have resolved this issue.Any helpful links plz forward [email protected]
    Thanks

Maybe you are looking for