Unable to turn on radio

I recently bought a BlackBerry 8230 for Verizon. I charged the battery and turned on the phone and it would not pick up signal. At the top of the screen is says service required and has an X next to the signal indicator. I am running OS 4.6.
I've tried pulling out the battery, going into manage connections and turning it on (the box never will check) and tried to register in the host routing tables all to no avail. I've also tried wiping the device and restoring the OS. Any ideas anyone? Thanks

Hi and Welcome to the Forums!
If you cannot turn the radio on, then there is nothing else it can do. Since it's brand new, I suggest you take it back...there's no need to fuss with something brand new that isn't working.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

S400 unable to turn off wireless

Hi , I am unable to turn off or on wifi/bluetooth with the f7 key(alternatiely the wireless key). wifi and bluetooth are enabled always whch i feel is power consuming when not required. the key seems to be unusable.
netbook config is :
i3, 2gb ram, atheos ar9285 wireless lan adapter, atheos ar3011 bluetooth adapter
i have installed both the wireless drivers from lenovo support.
what should i do to correct this.

hi Pravinrajpaul,
Welcome to the Lenovo Forums.
If you're running Windows 8, pressing the Airplane Mode (F7) turns OFF both the Wireless and Bluetooth radio. If you want to turn off just the Blueooth though, you will need to do it manually by:
1. Opening Device Manager (press Win Key+X > choose Device Manager)
2. Expand Bluetooth Radios then right click > disable the blueooth adapter.
3. For the wireless, choose Network Adapters under Device Manager and right click > disable the wireless module or boot into the BIOS by pressing the One Key Recovery button and under the Configuration Tab, set Wireless LAN Support to Disabled.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

BlackBerry 9360 Curve - 'Unable to turn Wi-Fi on'

Well I received a brand new phone today. Got home, sorted everything out. Went to look for my home wireless network and it came up with 'unable to turn wi-fi on' and it says 'the wi-fi radio is off' what does it mean and how can I fix it?
Would really appreciate it if anyone could help me. Thanks!

Did you tick the wifi box in mange connection area?
Here is a how to guide explaining.
http://docs.blackberry.com/en/smartphone_users/deliverables/33280/Turn_on_or_turn_off_a_network_conn...

My iPhone 4S keeps losing connection and turning off, and i am unable to turn it back on again without the charger, but it turns on when i press the button and regains signal fine once i return home?

Hi
I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
Please if you have any suggestions or know the cause of this problem inform me straight away.
Would be much appreciated.
Thank you.

Try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for help on getting your iPod into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

Unable to Turn on Home Sharing after iTunes upgrade

After the latest iTunes upgrade onYosemite, I get an 'Unable to Turn on Home Sharing' error on my 2 Apple TVs plus iPhone and iPad. Previously, I had no problem. I have restarted and reset my iTune on my MacBook plus all the devices now receiving an error message and the inability to utilize Home Sharing.
I can send videos to my Apple TVs from my MacBook through AirPlay, so this is not a network error.

Hi MomjiDoll!
I have an article for you that will help you troubleshoot your ability to use the Home Sharing feature:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

HT5012 After a flight with airplane mode on, my attempts to get cellular data came up with a No SIM. It says this in upper left and I am unable to turn on cellular. I've tried turning airplane mode off and on and off but nothing changes. Any help out

My iPad2 with cellular is saying No SIM in top left. I am unable to turn cellular on after a recent flight and having been in airplane mode. Any helpful suggestions?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

HT4623 I have an apple 3gs Iphone and in the middle of a restore settings it came up with an error message and i have only the dark screen with the apple sign on it. I am unable to turn off or complete the update what can i do ?

In he middle fo a restore i got a message re the battery and i am unable to get mu i phone back on as i have a dark screen with the apple sign on it I am unable to turn off or charge Help!!!

http://support.apple.com/kb/HT1808

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one.

Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim., Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim.

Unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim.

Try to re-set it as rudegar suggests. If that doesn't work, try a restore. If that doesn't work, try a restore as new.
If the settings are still grayed out, then your phone has suffered a hardware failure.

TS1398 still unable to turn Wi-Fi or Bluetooth on or off

still unable to turn Wi-Fi or Bluetooth on or off

Hi dyffy,
I see that you are having some issues with connections on your iOS device such as Bluetooth and Wi-Fi. Here are two articles that will help you address this issue:
iOS: Troubleshooting Bluetooth connections - Apple Support
http://support.apple.com/en-us/HT201205
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to turn streaming radio off

I am having turning streaming radio or Pandora off when using OS4. The stream doesn't go off when switching to another app. I can't see an on/off button in the radio or Pandora app. I like using multple apps but would like to turn off the stream.

The app has a play/pause button that will stop it. If it's in the background, you can double click the home button and scroll left to get to the audio controls.

Query Panel unable to show me Radio Group.

Hi Eweryone
I am using Jdev 11.1.1.4.
I am using a Transient Attribute in my ViewObject1("Updatable = Always") with Static List of Values coming from Different View Object2.
I included this Transient Attribute in my View Criteria and assigned a Bind Variable to it.
Settings for the Transient Attribute are
in the ViewObject1 its " ControlType : Radio Group"
in its List Of Values " Default List Type " Radio Group"
to its BindVariable "Control Type : Radio Group"(i tried keeping this and not keeping this ,but no luck.)
Now in the UI side when i am using this ViewCriteria as Query Panel with table in my page,i am unable to see the Radio Group for the Transient Attribute.(ChoiceList , CombeBox with Listof Values are coming)
https://forums.oracle.com/forums/thread.jspa?threadID=2519882&tstart=0
i saw this but no help.
I really appreciate if some one helps me .Thanks in advance.

The need to override paint() is that i want to show an image for which i am trying to use g.drawimage() method in paint. I don't know whether i can show an Image in a panel or not .
The image that i want to show is in a byte[] array. For which i was previously using
ImageIcon img = new ImageIcon(buffer);
Then i took a JLabel
JLabel label = new JLabel();
label.setIcon(img);
The problem in using this method is that i am continously updating this buffer with a timer and it continously update the image on the label. This shows flickering in the display .
whereas if i use g.drawimage of paint method it does not show any flickering but then i am unable to use my other panels of Applet.
Please tell me is there any imagelabel kind of a component on which i can show an image .

My play/pause button on my Ipod Classic is not working, I am unable to turn off my Ipod or push play. Can this be fixed?

The play/pause button on my ipod classic is not working, I am unable to turn off or push play on my ipod. Is there away to fix this?

Do other devices now connect?
Did the iPod connect before?
What encryption/security is the router using?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Unable to turn on radio

Similar Messages

Maybe you are looking for