Unable to Turn screen
I updated my ipad to a latest version with a wifi connection. I'm now unable to input my password because my ipad lost touch sensitivity and I had been turning it over to get points for it to work.
How do I sign on now as the screen won't turn.
Try resetting iPad.
http://support.apple.com/kb/ht1430?viewlocale=en_US&locale=en_US
Similar Messages
-
My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?
Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.
-
In he middle fo a restore i got a message re the battery and i am unable to get mu i phone back on as i have a dark screen with the apple sign on it I am unable to turn off or charge Help!!!
http://support.apple.com/kb/HT1808
-
My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?
Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one. -
Unable to turn off voice over and all of a sudden the touch screen is extremely slow to respond.
I am unable to turn off Siri/voice over and the touch screen is nearly unresponsive. Brought it to Best Buy to have the geeks look at it and and weren't really receptive unless I ponied up some cash for a service plan. Was hoping someone could help me out. Thanks!
- What hapens when you
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. I
- Next see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
- Then try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
The phone was left in bag on standby mode. unable to turn on after few hours . the phone was warm and i suspect battery drained out. however plug in the charger didn help as nothing appears on the screen even instruction to press the home and on/off buttton followed. Is it spoilt ?
Hi, johann, maybe u can try hard resetting = press home button and sleep button at same time for over 5 seconds, if u see an apple logo then, the iPhone maybe can restart, then u can do a charge for yr iPhone.
-
A730 - black screen, unable to turn monitor back on
hey all,
I made an attempt to clean up my monitors screen today, but accidently hit a few of the buttons on the bottom of my screen. One of them was the button to turn the monitor off/on, my screen went black, and now Im unable to turn the monitor back on (using the same button won't do it..)
heres a picture FYI
[img]http://i.imgur.com/p6VP2TS.png[/img]
does anyone have some tips? thanks!Wrong subforum. You ll have better luck if you post in correct subforum.
Moderator comment: Moved. Thanks!
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer. -
Hi
I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
Please if you have any suggestions or know the cause of this problem inform me straight away.
Would be much appreciated.
Thank you.Try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for help on getting your iPod into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock -
After upgrading to Yosemite, I am unable to share screen with Macbook Pro
After upgrading to Yosemite 10.10 on a 2008 MacBook Pro I am unable to "Share Screen" using my authorized user account. It worked fine before I upgraded to Yosemite.
I can access "Share Screen" by "requesting permission", but of course this doesn't work unless I am sitting right by the MacBook Pro to give myself permission, which defeats my original purpose for using "Share Screen".
I attempted to add another authorized "Share Screen" user account, but was unable to access the list of add "Groups and Users" on the host MacBook Pro from the "Share Screen" dialog box. The dialog box pops up, when I press "+" to add another user, but the list of users fails to appear. I assume the list of authorized users for screen share has somehow become corrupt.
All other ways to access "sharing user" accounts appear to be working properly. I can add and remove other "sharing users" without problems. For example, I can add a new authorized "file share" user and share files without problems.
I ran Disk Utility in Recovery Mode and normal mode and corrected all errors, and user permissions on both machines. I also ran "resetpassword" from Terminal in Recovery Mode and "reset" user permissions. I am not an experienced Terminal or Recovery Mode user though.
I also tried turning the Firewall off, to no avail.
I am attempting to access "Screen Share" on the MacBook Pro via a Macbook Air 13" manufactured mid 2013 also with Yosemite 10.10, however, I also attempted with an older MacBook Air which experiences the same problem.Thanks for the idea but it did not work, I do not know why it is asking me for a password which I never needed before for a guest to use the computer? I have tried everything and I do not know which password it wants? I do not see any option for a password for the guest account, to create one or delete one or modify it? Maybe this bug\problem will be addressed in a future update?
-
Fix for anyone unable to use screen sharing
Hi guys
Not so much a question as a fix for anyone who has been unable to use screen sharing since yesterday.
Apple have started to turn off parts of MobileMe however one of the issues is if you still have MobileMe signed in on your Snow Leopard install Screen Sharing will stop working to any computer.
To get things working again go into System Preferences -> MobileMe -> Sign Out.
It should now be fixed.
Hope this helps someone out.@Jay Gamel specifically, but to anyone who is having problems with Screen Sharing and thinks that since they don't use MobileMe that it must be something else ..
I have never used MobileMe, not even the free trial.
When I saw this post, I looked at the Mobile Me pref pane and since I had never logged in, there was no way to sign out, so I kept looking elsewhere.
Hours later, I read this email again and saw how timely it was, so I went back and looked again.
Even though I had never signed in, my AppleID was pre-populated in the Member Name field.
As soon as I cleared out this field, Screen Sharing started working again.
So, not only should you make sure you are signed out, but you should wipe out any information in either the Member Name or Password field.
I also noticed that, even after I solved it, as I continued to look at the issue, at some point the Member Name re-populated and sharing stopped working until I cleared it out again. -
I tried following the directions that I received about restoring my iPod touch. But there is one flaw. My power button is stuck and I am unable to turn it off. How can I go about either getting it fixed or restoring my iPod?
Easy, first make sure that the itunes on your computer is up to date. Next connect the ipod to your computer. If you have itunes 11.0 or above, wait until the device appears in the upper right hand side of the screen, or you can press ctrl-s, and the side menu will appear, and you can see more clearly the ipod appearing under the device category. Next simply click on the ipod and on the summary screen, you should see restore. Press restore, and you will see a dialog box asking to back-up & restore, restore only, or cancel. If you have information to save, press back-up & restore, if you want to wipe the device clean and start over, press restore. Once it's all done, you should be good.
If your ipod is less than a year old and not a refurbished device, contact Apple at 800-676-2775 for assistance on repair and replace. If you are near an Apple Store, go to http://www.apple.com/retail/ and find your local Apple Store and set-up a genius appointment and go in and have your device repaired or replaced.If your ipod is a refurbished device, it has to be 90 days old or less to be repaired or replaced for free.I hope this helps. -
my Macbook pro was unable to turn on. It shows a white screen with block sign in the middle, provides me with no error message. Does anyone know whats going on with my mac?
If the error message looks like this:
Your MacBook Pro has experienced a Kernel Panic if the above message shows, in that case you should have it looked at by the Apple Store.
If you get this logo:
The MacBook was unable to boot into OSX, and likely needs to have OSX re-installed. -
IPad 2 Dent, Unable to Turn Volume Down Physically
I just got this iPad 2 as a present from him. I recently just opened it, and noticed that there is a dent ON the bezel direct center of the volume rocker. I can change the volume up, but i am unable to turn it down without using the multitasking bar. Also, you can get a fingernail in between the bezel and the screen, so in other words, dirt is able to get INTO my iPad 2, literally inside the casing. Would Apple cover this as this was a brand new product purchased March 11th, and was given to me as a present on April 8th. It was still in the shrinkwrap, so i know my dad didn't do it. It seems like a manufacturing problem. Is there anyway i can get it fixed using my Apple care limited warranty? The store won't allow me to take it back as it has been over 15 days.
The problem is the time frame that you have waited from purchasing to opening the product. But I would present my case to Apple Care regarding the 1 year warranty. Either call Apple Care at 1-800-MY APPLE or make an appointment for the Genius Bar in the nearest Apple Store and explain exactly the situation and ask for a replacement under the warranty. Get names and positions of everyone with whom you speak. If you are unsuccessful on the phone with the first tier agent ask to be transferred to the supervisor. Be firm but polite in insisting that this iPad must be replaced under the warranty. If you have no success, as a final resort ask for your call to be escalated to Apple Customer Relations.
Dah•veed -
Iphone 4 turns off randomly and unable to turn it on without charger
iphone 4 turns off randomly and unable to turn it on without connecting to charger or PC
Hey Tiffy6996!
I have an article here for you that describes this issue and can help you troubleshoot the issue a little further:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Unable to capture screen fields in eCATT
Problem description 1 : Unable to capture screen fields in eCATT
Recording using SAP GUI Method.
Problem description 2 :Unable to capture Tab controls while recording
in eCATT using SAP GUI Method.
Thaks for any suggestion you could provide me and once again for your courtesy attention.
Regards,
Eric MonteiroHi Phani,
Please try below code:
*data declaration for reading values given by user in the selection screen field.
DATA: BEGIN OF i_tab OCCURS 0.
INCLUDE STRUCTURE rsselread.
DATA: END OF i_tab.
MOVE: 'LOGSYS' TO i_tab-name,
'P' TO i_tab-kind. u201CP For parameter
APPEND i_tab.
MOVE: 'GP_SIMVE' TO i_tab-name,
'P' TO i_tab-kind. u201CCheck if field is Parameter
APPEND i_tab.
*move program name and screen number into local variable.
l_prog = sy-repid. u201C(Try by directly passing program name also)
l_dynnr = sy-dynnr. u201C(Try by directly passing Screen number also)
*calling function module to get the value given by user.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
EXPORTING
program = l_prog
dynnr = l_dynnr
TABLES
fieldvalues = i_tab.
Hope this should slove your issue.
Thanks & Regards,
Gaurav.
Maybe you are looking for
-
How can I put a pdf (not downloadable, but viewed on the website) or a table in iWeb?
-
Can music already on an ipod be added to a new iTunes library ?
Hi Everyone - I recently purchased a laptop but have a dilemma with my iTunes libraries and iPods. My Nano was synched to my iTunes library on desktop PC, then I synched new classic iPod to same library, therefore both iPods had same music on them. I
-
How to change file type from .zip to .dock
I would like to know how to change the saved file type (.zip) to other file types such as (.txt), (.doc), (.dock) or (.pdf).
-
In my MAC OS X 10.6.8 appear this msg "The operation cannot complete because of an unknown error (PARM)"
-
Hello Fellow Engineers! I would like some useful insights from all of you. I need to build a GUI with a menu button that gives many options. Clicking any one option should open the associated block diagram and front panel where the user can enter fie