Unable to unarchive ZIP file Error - 1

Every time I try to archive a ZIP file, i get the message "Unable to archive (Error - 1)" How can I fix this?

I have to agree, the most likely scenario is a bad file. As I mentioned earlier, I don't think there are any Mac utilities for attempting a repair. "Repair" is somewhat vague. If a file is bad it is missing data, and likely this data is critical to the running of the file. If you could repair this file (say, on a PC) you still might end up with a corrupt movie file which might refuse to play. Even if the movie plays it might end early or something.
Could this possibly be part of a multi-part archive set? The file extension is totally wrong for that but the "05" suggest more than one of something.
I have also read there are some obscure utilities that do flavors of zip that can't be opened on Macs.

Similar Messages

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.

Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

"Unable to Open Project File" - error

Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

Welcome to the forums.
The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
If not, then try trashing your prefs with FCP Rescue.
Shane

Unable to down load file error 1321?

Unable to down load file error 1321?
Error_Message

Hi grahamg,
Please see my response in your other post: I am unable to download Acrobat message reads Insuffient prileges to modify the file C:\ Program Files [ x 86] Adobe\ Acrobat 11.0\Acrobatwow_exe.
Best,
Sara

I am unable to download zip files

http://avl1.teltonika.lt/Downloads.FM22
I am unable to download zip files from this URL

Thanks, I just needed to update (not to reset).

Unable to open .zip files

Hi,
I am having problems opening a .zip file sent to me from the 'YouSendIt' application on my macbook pro.
When trying to unarchive the file, I get a window with a stop sign and a message that says 'Unable to unarchive "130310 2.zipx" into "YouSendIt. (Error 1 - Operation not permitted.)'
Do i need some specific software?
Thanks,
Carl

Hi there, you shouldn't, but there are some strange close zip formats out there, might try the Unarchiver to deflate.
http://www.apple.com/downloads/macosx/systemdiskutilities/theunarchiver.html
Report what that says please.

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

"Unable to Check Out File Error" Message

I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
Thank you!

I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

Unable to access jar file error !

hello,
i have built my netbeans project and obtained the hequalifies.jar file . unfortunately when i'm trying to run this jar file from the prompt command I'mgetting the error: unable to access jar file
here is the command i'm typing:
C:\Users\User\Documents\NetBeansProjects\hEqUALIFIES\dist>java -jar " C:\Users\U
ser\Documents\NetBeansProjects\hEqUALIFIES\dist hequalifies.jar "
anyone has any clue?
10x!

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

Downloading zipped files error?

This may be a little silly, however, I'm trying to download the suport docs from https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202 - however, whne I try the zipped files, I get the following error...
Policy Denied
Access Denied
The file you are attempting to access is currently being blocked per
"MTO 2009-163-101A"
Connection Info
URL: http//help.sap.com/businessobject/product_guides/boexir31/en/boesdk_net_dg_12_en.zip
Username:
IP Address: 137.245.190.83
I've tried all options, save, link, save target... Probably something simple...
Thanks!

Thnaks

Unable to unarchive ZIP file Error - 1

Similar Messages

Maybe you are looking for