Unable to uncheck contol account tick for a G/L Account

Hi All,
I have created a G/L Account (Control account tick box selected) and posted a Deposit entry. When I tried to uncheck contol account tickbox , System is not allowing me to do.................How do I uncheck this tick box as I have ticked this check box by mistake when I have created this G/L Account.
Regards,
Sree.

Dear All,
Thanks for your precious Suggestions. I have created new G/L Account and reversed the transaction posted on Old G/L Account. I have tested the same scenario on Test DB. These are the operations what I did.
1. I have created a G/L Account.
2. In Journal Entry screen I have selected the newly created G/L Account. Before adding I have opened the G/L Account from the Journal Entry screen and ticked the Control account check box. and updated the G/L account.
When I tried to add the Journal Entry system throws an error msg saying that cannot add the J.E as contol account is ticked.
3. I have unchecked the Control A/C check box and updated this G/L in Chart of accounts.
4. In Deposits screen I have selected the same newly created G/L account in Bank Account Tab. Before adding I have selected Control account tick box and updated the G/L account, and added the deposit.
And Deposit got added.
I am wondering how is this possible???????? When I tried select the G/L account ( Contol account ticked and linked to BP Master Data) I was not able to select..........
Is this a BUG in SAP B1 2005 PL 47.
Regards,
Sree.

Similar Messages

Account determined for entry (chart of accounts no) WRX 0003 not possible

HI, I'm trying to GR a PO for a material using movement type 101 and am getting the following error
"Account determined for entry (chart of accounts no) WRX 0003 not possible"
I know that I need to go to OBYC to make an entry for transaction WRX for valuation group code 0003 and valuation class and then assign it to the relevant gl.
My problem is I don't know what the valuation class should be. In the PO there is short text entered for the item rather than a material number so I cannot go to the material master to check what valuation class is assigned. Is it linked anywhere to the material group?
Thanks in advance for your help

yes u can do
fist
u can make the entry and blank valuation class and give the gl account in wrx
so that it will take this GL account for blank materia number
or
u cna give valuation class to material group
MM purchasing -- materal master -- Entry Aids for Items Without a Material Master
hope this helps

Unable to view entries in FAGLL03 for Zero Balance Clearing Account

Hi experts,
We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
Account 19900000, company code 1100 is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
Regards,
Sateesh

Hi
In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
Regards
Sandeep

F5670: No Account Assignment for line item 002 account type S

Hi Experts
I have created assesment cycle for transfering cost from an cost center to an statistical order. While executing assesment cycle in test run, it executes successfully. But when I take out the test run tick, it gives above error.
Pls help
Regards
Bhavesh Jain

Hi,
Maintain account determination for reconciliation posting (transaction OBYB). Specify the posting keys for general G/L account postings. Example:
Posting key 40: Debit posting
Posting key 50: Credit posting
check the business transaction and maintain require setting in OBYB
Regards
Ravi Kumar

How to get On Account Balance for a Customer in Accounts Receivables(AR)

Hi,
Pls let me know how i can get the On Account Balance and Customer Balance for a particular customer in AR.
Pls let me if there is any SQL query or function availabe to get On Account Balance in AR.
Is On Account Balance and Customer balance is same in AR.
Pls let me know how i can get both the values.
regards
Udit

try to join your query from these tables:
1.Customer - RA_CUSTOMERS_ALL
2.Customer Name - RA_CUSTOMERS_ALL
3. Ship to /Bill to & Location - HZ_CUST_ACCT_SITES_ALL and RA_TERRITORIES
4.Account Balance - AR_PAYMENT_SCHEDULES_ALL
5.Current Balance - AR_PAYMENT_SCHEDULES_ALL
if you additionally need aging try to set from here
a)1-30 Past - AR_PAYMENT_SCHEDULES_ALL
b)31-60 Past - AR_PAYMENT_SCHEDULES_ALL
c)Over 90 Past - AR_PAYMENT_SCHEDULES_ALL
This way you can achieve the outcome

Unable to send or receive messages for the Btinter...

Hello
I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
Unable to send or receive messages for the Btinternet (xxx) account.
Server Error: 0x800CCC90
Server Response: -ERR inactivity timeout
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800420CD
Protocol: POP3
Port: 110
Secure(SSL): No
Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC0F
Protocol: POP3
Port: 110
Secure(SSL): No
The messages for this account are available via webmail, and sending an email works.
I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong.
Could anyone suggest what is going on here please?

LesHarg wrote:
Hello
I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
Unable to send or receive messages for the Btinternet (xxx) account.
Server Error: 0x800CCC90
Server Response: -ERR inactivity timeout
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800420CD
Protocol: POP3
Port: 110
Secure(SSL): No
Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC0F
Protocol: POP3
Port: 110
Secure(SSL): No
The messages for this account are available via webmail, and sending an email works.
I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong.
Could anyone suggest what is going on here please?
Hi. Welcome to the forums.
For starters, the recommendation by many people is to uninstall BT Desktop help.
If this has always been the case, rather than a sporadic issue, then it could be an account problem that seems to plague some accounts - and has done for years. Hopefully the changeover from Yahoo! to Critical Path will cure this particular issue. Try the other settings mentioned by Keith.
Even though some accounts are fine, there is still a possibility that your local security software can interfere. For example if you have email scanning turned on - then this can be turned off to see if that helps.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Account grouping for movement types

Hai
Can any one explain me in detail about the account grouping for movement types,
in account determination without wizard,as i am unable to understand the lines for each movement types.
If u have any link, pl attach it also.
Thank you

Hi, Please refer the below link.
http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm
Thanks,
Venkat

Activate Open Item Management for a tax GL account

Hi experts
I have tried different options and explored forums but haven't been able to find the solution as yet.
I have some tax GL accounts (Tax Category field in their GL master is < or > i.e. Input or Output Tax Account). There have been postings to these accounts but these accounts are not open item managed. To perform clearing for these accounts, I need to activate OIM for which I'm trying FAGL_ACTIVATE_OP but the system gives me error"
"Not possible to determine tax indicator in company code xxxx
Company code xxxx is not considered for the activation"
When I further drilldown the error, i find the following information:
Diagnosis
Postings to the selected account require a tax code. On the basis of the company code data (T001), the system tried to determine a tax code for zero tax. However, there is no such tax code stored for the company code.
Procedure
Specify the tax code for zero tax in the company code. You do this in Customizing for Financial Accounting Global Settings (New) under Assign Tax Codes for Non-Taxable Transactions.
I have checked settings in OBCL for Non-Taxable Transactions and found that I0 and O0 are maintained for Input and Output tax (also tax jurisdiction). In Table T001 I also find these entries so these seem to be complete.
Can somebody please help me sorting out this issue.
Many thanks!
Moazzam

Hi,
Some G/L accounts cannot be managed on an open item basis,
specially G/L accounts that are used in account determination for
automatic transactions (ie: accounts set up as bank accounts, Tax
accounts, raw material accounts, reconciliation accounts, profit and
loss accounts).
It is the standard design of the FAGL_ACTIVATE_OP that there is no
conversion of a tax account to open item management.
Processes as the posting of the sales/purchases tax payable do not
process any clearing transactions therefore the open item management is
not necessary. Clearings must really never be posted to an input VAT or
output vat tax account, otherwise it would prevent subsequent processes
on the actual open items (Customer or vendor). The only tax account on
which the open item management should be possible is the G/L account of
the deferred tax.
Hope my information was helpful for you.
Regards,
Cristiano

G/L account picked for the "wrong" source system entry

Dear Experts,
in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
What can be the reason for the picking of the G/L account from the wrong source system?
Can the note 1357871 bring the correction?
Thank you very much!

Hello Dima,
I think your problem comes from your source system for product category management.
Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
If it does not work, log an OSS message.
If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
Then, your customized G/L account definition for product category and account assignment category should be OK.
Regards.
Laurent.

Customize workflow for project in po account generator workflow

hi,
i customize workflow for project of PO account generator.
the project is not working for PO account generator.
for that customize PO account generator.
it is working for one user.it is populating charge account.
but it is not working for new user.
i checked why it is working for PO account generator.
i put one custom package.
I'm taking project_id .
it is not reading it.
why it is not working for other user.
can you check and conform me.
reg
sasi

Hi Asif,
Thanks for the reply.
I referred the links mentioned by you, but couldn't find anything relevant to re-triggering of Account Generator workflow.
The customizations I did are working fine and is triggering the workflow. But my Question is, what are the circumstances that re-trigger the Account Generator for a given Purchase Order.
To elaborate, say for instance I have created a PO for PO category 'Electrical Equipments' furnishing all other details and charge account is generated for this category, and the PO is saved. Now I come back and change the PO category to 'Medical Equipments' for the same PO, retaining all the other info same.
So here, will the Account generator be re-triggered to generate different charge account?
Kindly suggest.
Thanks,
Nivedana

GL Account determination for new calendar year

I notice in the SAP database that the GL account determination for 2010 has the accounts filled in as they came over from 2009, however in some of our clients's databases we had to manual enter them. Is there some setup we missed?

You may check this thread first:
Re: Newly Entered Posting Date - System Message in 2007
Thanks,
Gordon

Dont understand what i should put down for host name for creating an email account?

Dont understand incoming and outcoming server. dont know what to put for host name.
can someone help?

Do you have your email account set up on your computer e.g. on Outlook on a PC or Mail on a Mac ? If you have then you should be able to sync the settings from that to your iPad via the Info tab when connected to your computer's iTunes. Or you could just look at the settings for the account on your computer's email program and copy them over to the iPad manually.
The incoming and outgoing server names are the servers that your email provider uses for your account to recieve (incoming) and send (outgoing) emails. A lot of accounts should be covered by the options that are listed on the 'Add Account' screen - for my Yahoo based accounts I just chose Yahoo! and the settings were set for me. If you have an account that isn't covered by those types then you could try logging into your account via a browser and see if they have any help for what settings you need to use. Different account providers have different settings, so if your can't find anything on your provider's site if you say on here who your provider is there might be somebody else here who has the same provider and can tell you what settings to use.

Notifications for just one email account?

hi all.
I have many email accounts, including one that was set up to push time-sensitive email messages to me.
I don't need notifications for any of the accounts except for the time-sensitive account (which is a gmail push account).
does anyone know how to enable Mail Notifications (Lock Screen and Alerts) for just one email account?
cheers,
Gregory

You can't

Account groups for Partner Roles in Vendor Master

1. Can we use same account group to create the vendor master for the different partner roles? for the partner roles like goods supplier, invoicing party, order party, etc do all these need to have different account groups , example one account group for goods supplier, one account group for invoicing party, etc , etc.
2. why we need the configuration for partner role in purchasing documents besides partner role settings for vendor account group. what is the logic behind to have partner role dependent settings for purchasing documents.
If we do not maintain for partner role settings for purchasing documents what effects it will cause?

> 1. We can have 1 account group represent all partner role or separate account group for each role.
1.If we use the same account group, the field selection control for fields will be applicable to partner roles also. If we have made vendor schema as mandatory in vendor master than we have to assign to partner vendor also. Example ordering address will not require company code data only purchase data, it will not require also pricing procedure as mandatory as no price determination will be required for ordering address.
I think we have to use combination of account group -same account group and different account group will defining vendors for partner function.
Do we require to assign vendor schema group to following vendors roles- goods suppliers, invoicing party and payee.
If we do not assign vendor schema group will these partner role determine price from the VN partner role. For example VN (vendor) has vendor schema group assigned, no vendor schema group assigned to invoicing party, then while doing MIRO the invoicing party will be defaulted. Do the price determined for VN role will be populated for invoicing party in MIRO?
> 2. we need partner role in purchasing doc because we can copy partner role from vendor master to purchasing document
It means we need to assign similar roles in schema for vendor account group and purchasing documents. If you see the schema in config for partner determination in IDES system, different roles exists in vendor schema and purchasing document schema.
This is creating confusion for me to understand.
Please clarify
2. we need partner role in purchasing doc because we can copy partner role from vendor master to purchasing document

Parallel Accounting Method for IFRS

Hello all,
My company would like to explore the parallel accounting method for IFRS. Currently we are on ECC 6.0 with classic GL.
Currently we have both US GAAP and local GAAP reporting running in the same ledger. We use a similar method (setting up additional H accounts which are used in local GAAP reporting only) to segregate local GAAP from US GAAP as recommended by SAP.
We set up 2 different depreciation areas: 01 (post to US GAAP accounts) and 02 (post to local GAAP accounts). The problem we ran into at year-end is pertaining to Retained Earnings. Because this a complete replacement method (US GAAP reporting will ignore all the H accounts which are set up for local GAAP and visa versa), we can't simply roll all the P/L accounts into one Retained Earnings account. We have to set up 3 Retained Earnings account (one for US GAAP only accounts, one for common accounts and another one for local GAAP accounts).
If we add IFRS into the mix, we will need to set up even more Retained Earnings accounts which is not ideal. Also, we plan on including more countries into our SAP environment which requires us to generate additional local GAAP reporting. So my thinking is that this will become very hard to manage.
Also, this method will fall apart if the common accounts are not the same for any of the reporting requirement (e.g. common accounts for US GAAP and local GAAP are different than IFRS).
My understanding is there are 2 ways to handle parallel accounting: replacement (which is what we are current using) or adjustment methods. Instead of completely replacing the US GAAP accounts, the adjustment method is to post the delta to the additional accounts.
My question is:
1. Giving current situation of my company, what is the best method to handle IFRS and also implement additional local GAAP reporting in the same environment?
2. What is the best practice to handle parallel accounting method? Replacement or adjustment method?
3. Since I'm already in the replacement method, can I easily switch to the adjustment method?
Any guidance will be greatly appreciated.
Regards,
Cassandra Wong

Cassandra,
Check out this blog which has info and process map for parallel accounting. Theer's also a link for a recent SAP webinar about how we implemented parallel reporting for our own use.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID2115139750DB10714505287783485243End?blog=/pub/wlg/15679
siva
Edited by: Siva Darivemula on Sep 25, 2009 7:37 PM

Unable to uncheck contol account tick for a G/L Account

Similar Messages

Maybe you are looking for