Unable to unistall Cisco AnyConnect VPN - please help
I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
Please Help.
Thanks,
Mike
Windows Event Log detail as follows:
Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
Exception code: 0xc0000005
Fault offset: 0x00029132
Faulting process id: 0x1e74
Faulting application start time: 0x01d02328f37bd890
Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
Faulting package full name:
Faulting package-relative application ID:
Similar Messages
-
Trouble with Cisco Anyconnect VPN Client
Hello,
our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciatedyou may want to try the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=733 -
I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again -
Cisco AnyConnect VPN app on iPhone 4s won't connect
I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
ThanksAlthough I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community. -
Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN
Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given. -
I am unable to review my apple id,please help me
i am unable to review my apple id,please help me
Hello sumitkkr,
Thanks for using Apple Support Communities.
I'm not sure what you mean by being unable to review your Apple ID. For Apple ID support, please visit the website below.
Apple ID Support
http://www.apple.com/support/appleid/
Take care,
Alex H. -
after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!
J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.
-
The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?
Go to appleid.apple.com. Log in with your Apple ID & password. Update your contact information.
-
Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.
That's usully symptomatic of a phone that was jailbroken or hacked to unlock it.
-
HT5467 Hi am unable to locate the SIM Tray please help me
Hi am unable to locate the SIM Tray please help me
SIM of an iPad is located about 2 inches from the bottom at portrait view (not landscape view) on the same side of the volume button.
Use a needle to poke into the tiny hole of the SIM tray. With one swift pull, you should be able to eject the SIM tray. It could fly off if you pull too hard. So be careful of your strength of pulling. -
Problem using SunRay with Cisco AnyConnect VPN Client
I am using Cisco AnyConnect VPN Client Version 2.5.3046
I have a PC and a SunRay connected to my router. I use VPN to connect my SunRay and my PC to my work computer. My PC works fine, I am able to connect to the internet and also run cisco VPN to connect to my work computer. But when I try to use my SunRay, I get a window on the screen with the message:
VPN IKE Phase 1 agg I msg1This window keeps moving around on the screen. I am not able to connect my SunRay through VPN to my work computer. Any idea what could be wrong and how I can fix this?2.2 is definitely better.
On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
Aaaaarrrrrrggggggghhhh. -
I recently downloaded the most current version of itunes automatically, got an error during the install process and was unable to open my existing itunes after that occurrance. I unistalled and reinstalled 3 times. Says installed finished but when I try to open itunes I get the following pop up.
Apple Application Support required. Error 2 (windows error)
Please help, I'm a Ballroom Dancer and need my music back.
Thanks.
MartyLet's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Cisco AnyConnect VPN client and 256 AES encryption in IE8
Hey,
We have a site that we are trying to connect to with the AnyConnect VPN client version 2.5.3055 on Windows XP SP3. As soon as we enter the site info and hit select, it says a connection was unable to be established.
I believe this has to do with the encryption, its set up with 256 bit AES. We are only able to install IE8, which on XP only supports up to 128 bit encryption, so in IE8 the page will not load. To fix that issue we installed firefox which supports 256 bit encryption. We can get to the page there, but when we go to connect to the same site VIA the VPN client it still will not connect. It will work fine on a windows 7 box with IE9 installed from the same network.
My question mainly pertains to how the AnyConnect client connects on the back end. Does it use Internet explorer's SSL layer by default? Or does it have its own? If it connects through internet explorer, is there a way to change it to firefox so it will actually be able to open up a connection?
Thank you for your answers in advance,
JohnHey Jeff,
Thanks for answering that question. Hmm, so it doesnt go through the browsers SSL layer. We have systems on the same network (same proxy, firewall, vlan, etc). All the systems with windows XP SP3 and IE8/IE7 can not connect to the VPN (they arent even able to start the connection and ask for proxy/logon info.), all the systems with windows 7 and IE9 can. Same setups on each one as far as the security policies go as well. I thought it may have to do with the 256 bit encryption that they are using.
If thats not the case, what else could be causing the problem? weve tested it on about 5 XP machines and 5 Win 7 machines, same results on each. Connects on Win 7, does not connect on Win XP.
Thanks,
John -
When I start up Bridge CC I get a error message instructing me to purge cache in preferences which I do but it doesn't work and freezes my mac. I cannot curretnly use Bridge CC. PLease help as this is costing me time and money - thank you in advance....
Hold down the Option key as you launch Bridge, keep it down until you see a dialog box, then click all three options in the re-set box that comes up.
If you don't see that re-set box, you're doing it wrong, i.e., you're not holding the Option key down fast enough. -
Please help me to resolve this issue
Use Skype. Works great!
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Setting up airport extreme base station with Mac and PC
I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to m
-
What settings to make a dvd from FCP 5.1.1
Where is MPEG2 or must I now use 264 with compressor? MacBook Pro Mac OS X (10.4.6)
-
Trying to get a square to change to different shapes when you select a button from the menu, it changes from one size to the next. Can anyone help me find a way to get this done, I am more on the designer side of the board but trying to do the back g
-
Hi, First I would like to say that while registering for this forum I saw probably the most ridiculous CAPTCHA ever, it was not readable and CAPTCHA reload did not function. I then clicked the "read" link and opened an mp3 file which of course does
-
Please can u help transferal of ALL my photos from sony xperiaz1 to macbook pro. I've tried several times but lots r still missing altho' still on mob. In hope - thanks!