Unable to unlock blackberry curve 3g 9300 with the unlock code

I have the same problem and could not unlock my blackberry curve 3g 9300 from Canada's wind network.
I have called my network provider twice and obtained the unlock code. I also called back to reconfirm the unlock code.
However each time I tried to unlock my blackberry curve 3g 9300 with the unlock code ,it refuses to unlock.
please assist me with a solution.
I am John Green
Calgary,Canada

After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Just unlocked Blackberry Curve 8520 with online code, now cannot make calls or send sms! PLEASE HELP!

Hi,
I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile)
It looks as though it is unlocked and I have checked the connections - I have signal and it says I am connected to the vodafone network, however, I cannot make any calls or send texts! If I try to call a number I get the call failed signed and the failed call dial tone. I tried to send a text but it didn't work - the text now has a red X and says 'unidentified subscriber'. I know this is a fault with my phone as the people I have tried to text and call have no problems with their phones/networks.
Please somebody help me! I have no idea what to do! I contacted the unlocking company and they say if I'm sure the sim I'm inserting is active (which I am) then it is likely my phone has been blacklisted, but I dont think it has. I bought it as a pay as you go handset from Argos just a week ago and it's been working fine until then.
I put my old t-mobile sim back in and it seems to work - does this mean it hasn't been unlocked successfully or not?
Many thanks

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Then try your Vodafone SIM again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Question on blackberry curve 3g 9300

Is that blackberry curve 3g 9300 able to play like bold 9900, when connected to the blackberry PlayBook? Example, what the commercial shows, able to use remote control on presentation.

yes it can be used like a remote control with latest Bridge
good info here
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=en27019BlackBerryPla...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Unlock my blackberry Curve 8520: Enter service provider mep code (0) left

Good afternoon,
A few days ago I bought a BB Curve 8520 from a friend but the phone says:
"enter service provider mep code (0) left"
Is it possible to fix this problem?
Regards,
Julian

Someone tried too many bad attempts to enter an unlock code in the device.
After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Blackberry Curve 8520 came with no SIM card.

My Blackberry Curve 8520 came with no SIM card. Could some expert advise me what to do now, it's with vodafone, and I don't know whether it's contact or PAYG, thanks

Is it a brand new service for you? Or did you have another phone through them previously.
If you had another one previously, take the SIM card from that and put it into your BB. Otherwise, go back to your carrier and get one.
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my Mac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events

I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?

Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this? I fear this is a really stupid question!
My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails. But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments. To further complicate things I have other email accounts that I use for business/professional and community work. If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level? or both?
Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there a way to name my personal account as one to sync to iCloud?

The computer is unable to establish a two way communication with the device

Hi I am trying to fix a problem for some one else, and I am struggling where to look next. The issue is that we are unable to check the ink levels of a HP Deskjet 1050 printer. The error message states that the computer is unable to establish a two way communication with the device. After running through the troubleshooting guide about this issue on the HP site with no joy, I decided that it may be the printer and suggested a replacememnt. Unfortunately A new HP Envy 5530 was purchased and connected (wirelessly) but the issue remains. I have uninstalled the drivers multiple times, and also disabled any firewall/anti virus software in case this was interfering. I was hoping that some one could point me in the right direction next? None of the other forum posts here (or any google searches) give a solutuon which has fixed the problem. Thanks

No I cant. Unable to ping the printer too, not sure if this is possible normally?

XMLStreamException: Unable to write XML string which starts with the illegal XML char 0x0000

Hi,
I am trying to run a WebLogic 8.1 Workshop webservice using Tuxedo Controls. I
am running in to an XML error:
<faultcode>JWSError</faultcode>
<faultstring>com.bea.xml.marshal.XmlEncodingException: Error writing XML stream:
com.bea.xml.pure.XMLStreamException: Unable to write XML string which starts with
the illegal XML char 0x0000</faultstring>
<detail>
If i look into the application server log file, It says:
<FML32Deserializer::deserializeInteger>
####<Dec 19, 2003 1:25:00 PM CST> <Debug> <WLW> <centurytelweb> <cgServer> <ExecuteThread:
'11' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-0237CF026485B78A2335>
<000000> <Exception deserializing field BUFFERSIZE, exception: weblogic.jws.control.ControlException:
Error getting field BUFFERSIZE as a Integer, exception: 4 (FNOTPRES)>
####<Dec 19, 2003 1:25:00 PM CST> <Debug> <WLW> <centurytelweb> <cgServer> <ExecuteThread:
'11' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-0237CF026485B78A2335>
<000000> <FML32Deserializer::deserializeField - Name=ROWID, type=class java.lang.String>
But these fields are in the field table class file generated using java weblogic.wtc.jatmi.mkfldclass32

I am pasting the response i get while i try to run this web service using WebLogic
Workshop.
Anyones help would be much appreciated.
Thanks,
Deepak
Service Response
Submitted at Friday, December 19, 2003 1:25:00 PM CST
<error>
<faultcode>JWSError</faultcode>
<faultstring>com.bea.xml.marshal.XmlEncodingException: Error writing XML stream:
com.bea.xml.pure.XMLStreamException: Unable to write XML string which starts with
the illegal XML char 0x0000</faultstring>
<detail>
com.bea.wlw.runtime.core.request.ResponseValidationException: com.bea.xml.marshal.XmlEncodingException:
Error writing XML stream: com.bea.xml.pure.XMLStreamException: Unable to write
XML string which starts with the illegal XML char 0x0000
at com.bea.wlw.runtime.jws.request.MimeXmlResponse.setReturnValue(MimeXmlResponse.java:35)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(BaseDispatcherBean.java:242)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(BaseDispatcherBean.java:54)
at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(SyncDispatcherBean.java:159)
at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(SyncDispatcher_k1mrl8_EOImpl.java:100)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Dispatcher.java:134)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.dispatch(Dispatcher.java:46)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.exploreExec(HttpServerHelper.java:253)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:570)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: com.bea.xml.marshal.XmlEncodingException: Error writing XML stream:
com.bea.xml.pure.XMLStreamException: Unable to write XML string which starts with
the illegal XML char 0x0000
at com.bea.xml.marshal.MarshalContext.error(MarshalContext.java:140)
at com.bea.xml.marshal.MarshalContext.writeCharacterData(MarshalContext.java:178)
at com.bea.xml.marshal.AtomicValueMPlan.marshal(AtomicValueMPlan.java:79)
at com.bea.xml.marshal.MarshalContext.writeElementObjectOrHref(MarshalContext.java:426)
at com.bea.xml.marshal.BaseMPlan.writeValueUsingStrategy(BaseMPlan.java:307)
at com.bea.xml.marshal.BaseMPlan.marshal(BaseMPlan.java:349)
at com.bea.xml.marshal.MarshalContext.writeElementObjectOrHref(MarshalContext.java:426)
at com.bea.xml.marshal.BaseMPlan.writeValueUsingStrategy(BaseMPlan.java:307)
at com.bea.xml.marshal.BaseMPlan.marshal(BaseMPlan.java:358)
at com.bea.xml.marshal.MarshalContext.writeElementObjectOrHref(MarshalContext.java:426)
at com.bea.xml.marshal.BaseMPlan.writeValueUsingStrategy(BaseMPlan.java:307)
at com.bea.xml.marshal.BaseMPlan.marshal(BaseMPlan.java:349)
at com.bea.xml.marshal.MethodMPlan.marshal(MethodMPlan.java:260)
at com.bea.wlw.runtime.core.dispatcher.DispMessage.marshalXml(DispMessage.java:386)
at com.bea.wlw.runtime.jws.request.MimeXmlResponse.writePart(MimeXmlResponse.java:105)
at com.bea.wlw.runtime.jws.request.MimeXmlResponse.writeOutputPart(MimeXmlResponse.java:97)
at com.bea.wlw.runtime.jws.request.MimeXmlResponse.setReturnValue(MimeXmlResponse.java:31)
... 22 more
</detail>
</error>
"Deepak" <[email protected]> wrote:
>
>
>
Hi,
I am trying to run a WebLogic 8.1 Workshop webservice using Tuxedo Controls.
I
am running in to an XML error:
<faultcode>JWSError</faultcode>
<faultstring>com.bea.xml.marshal.XmlEncodingException: Error writing
XML stream:
com.bea.xml.pure.XMLStreamException: Unable to write XML string which
starts with
the illegal XML char 0x0000</faultstring>
<detail>
If i look into the application server log file, It says:
<FML32Deserializer::deserializeInteger>
####<Dec 19, 2003 1:25:00 PM CST> <Debug> <WLW> <centurytelweb> <cgServer>
<ExecuteThread:
'11' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-0237CF026485B78A2335>
<000000> <Exception deserializing field BUFFERSIZE, exception: weblogic.jws.control.ControlException:
Error getting field BUFFERSIZE as a Integer, exception: 4 (FNOTPRES)>
####<Dec 19, 2003 1:25:00 PM CST> <Debug> <WLW> <centurytelweb> <cgServer>
<ExecuteThread:
'11' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-0237CF026485B78A2335>
<000000> <FML32Deserializer::deserializeField - Name=ROWID, type=class
java.lang.String>
But these fields are in the field table class file generated using java
weblogic.wtc.jatmi.mkfldclass32

HT201274 Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

T-Mobile is a GSM network whereas Sprint is a CDMA network. They are incompatible. Sprint is not obliged to unlock a phone that is still under contract. Their phones may not be capable of being unlocked.

Drawing images gives 2 different results with the same code.

Im adding my code on here, and its sort of long but ill try to explain it. Most of it you can ignore.
Anyway i'm making a tree menu with only 1 level of expansion. So you have a TreeMenu object, and this object has some Branch classes. These Branch classes have Leaf classes. That is all. On the menu there is also a little box where you can click to expand and collapse each branch. if a branch is expanded, all of its leaves are shown. if it is collapsed only the branch name is shown.
So far what I've described above works, there is a small scale compilable working program, that is alright. Theres just a few bugs to fix.
A little feature of the tree is if a branch or a leaf is selected (has been clicked on in the past) it has a blue background. This sort of works. The branch names seem to work alright, and some of the leaves. However other if you run the example i provided you can click on Leaf 1, and it will be ok, but if you click on Leaf 2 then there blue background is twice as big as it should be. But for the rest, it works ok.
This is weird to me because the same code handles any of these same situations. So it seems that i get 2 diferent results with the same code. If anyone would like to help heres some stuff you should know:
You can ignore Leaf class, i dont think theres any errors in there.
You can ignore just about all of Branch class except the update() method.
You can ignore all of TreeMenu class except the inner MouseListener class might be useful.
You can ignore TreeTester. Just the JFrame tester class.
to run the code:
javac TreeMenu.java
java TreeMenu
http://cs.ucsb.edu/~jsterling/treemenu.zip
thanks.

You make a good point Stefan but unfortunately I already checked that. I have even copied the mapping (right click copy) and pasted it from the working Mapping to the bad Map (Paste) to make sure the context values were all the same.
I also opened all the queues and compared the values in each. All values match exactly except for the result(out) queue.
In both tests I am using the same IDOC XML file.
These are the only differences I see.
1. The IDOC is exactly the same as far as I can tell but they come from two different source SWCV. SAP APPL 4.7 and Steelcase_Procurement (ECC 6.0).
2. The working map uses a local UDF. The bad map calls the UDF from a Function Group. Is there a Java version difference between the two?
A better sample of the result queues look like this:
Correct Result:
Thickness of Glass: 20
Height: 10
Width: 5
Length: 18
Thickness of Glass: 10
Height: 15
Width: 8
Length: 14
Bad Result:
Thickness of Glass: 20
<null>
<null>
<null>
Width: 5
<null>
<null>
<null>
I took this chance to redesign my Variant Config output to separate the characteristics/values, but I'm still bothered that I was unable to determine what would cause the differing values.
Any ideas?
Thanks,
Matt

TS1702 I'd purchased Cool Keyboard, Unlock All for 9.99$ but the unlock is fail! I want to refund my money.

I'd purchased Cool Keyboard, Unlock All for 9.99$ but the unlock is fail! I want to refund my money.

There are no Apple or iTunes Store employees here. You will have to take this up with iTunes Store support.
http://www.apple.com/support/itunes/contact/

I recently brought an iPhone 5 from a person and their apple id is still on the phone i for got my passcode and locked the phone up. I factory restored the phone and i still need their id to unlock it. how can i bypass the unlock activation

i recently brought an iPhone 5 from a person and their apple id is still on the phone i for got my passcode and locked the phone up. I factory restored the phone and i still need their id to unlock it. how can i bypass the unlock activation

You can't. Until the previous owner removes the activation lock, the device is useless to you; Apple won't remove it unless presented with proof that the registered owner is dead.
(108990)

Issue in printing the batch document with the T-code COPI

Issue in printing the batch document with the T-code COPI.
So Batch document is not printing not printing.
Kindly help.

I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

How can i see if other accounts on my ipod touch with the serial code?

How can i see if other accounts on my ipod touch with the serial code?

What? If other accounts what?

What's wrong with the following code?

What's wrong with the following code?
Circle cir1;
double rad = cir1.radius

The circle Object was never instantiated.
In other words, you have set a declaring of a Circle, but it has not been created in memory yet.
You will create it using the " = new Circle( PARAMETERS_HERE ); "
Or some other method that returns a circle.

Unable to unlock blackberry curve 3g 9300 with the unlock code

Similar Messages

Maybe you are looking for