Unable to unlock with mute key

My device is Blackberry 9300 vs5.0.0.977.
Hi people, I am currently having a problem with my blackberry.All my convenience keys aren't working. They works like just like my keypad now. Pressing the play left track key gives me HL, pressing the mute key gives nm and pressing the play right track key gives me uo. pressing the left side key gives me jk and pressing the right side key gives me yi.
The default side convenience keys are camera and voice dialing.
The problem is after locking my keypad with default 'A' button, I am unable to unlock it. It prompts me to press the mute button, which doesn't work now. Each time I press the 'A' button, I can't unlock my phone anymore. I did many battery pulls, but upon pressing the 'A' button again, I can't unlock my phone again.
Please help me put my keys back to their original function. Thank you.

Try specifying RETURN instead of 'changeit' when asked the password for <aaaa>, and make sure that Tomcat knows the password of the keystore, however that's done - some configuration entry (don't ask me).

Similar Messages

Z30 STA100-5 Assistant "activate with Mute Key" with "use Assistant when locked" not working

When my phone is connected to bluetooth, the mute key should allow me to use the assistant even when the phone is locked. The assistant works just fine on bluethooth when the phone is NOT locked but when the phone locks, the mute button does not function.
I use picture lock but this all seemed to work in previous versions.
OS 10.3.1.1767
Rogers Wireless
Any ideas?
Thanks

May not help but give this a try on the G5:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
I would also first turn off both computers then connect the FW cable. If both computers have a FW800 port then you can use a standard FW800 cable. Boot the G5 into TDM. After the TDM screen appears boot the new computer normally.

Unable to succed with security key generation using keytool?

<h6>Hai ,
i am trying to generate a key for testing security in my application.
i have done by following way</h6>
C:\Program Files\Java\jdk1.5.0_10\bin>keytool -genkey -keystore test -alias aabc -keyalg RSA -storepass changeit
What is your first and last name?
[Unknown]: mahi
What is the name of your organizational unit?
[Unknown]: mahi
What is the name of your organization?
[Unknown]: mahi
What is the name of your City or Locality?
[Unknown]: chennai
What is the name of your State or Province?
[Unknown]: TN
What is the two-letter country code for this unit?
[Unknown]: IN
Is CN=mahi, OU=mahi, O=mahi, L=chennai, ST=TN, C=IN correct?
[no]: yes
Enter key password for <aabc>
(RETURN if same as keystore password): changeit
<h6>but when i restart my tomcat server it says the following error</h6>
java.io.IOException: Keystore was tampered with, or password was incorrect
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:768)
     at java.security.KeyStore.load(KeyStore.java:1150)
     at org.apache.tomcat.util.net.jsse.JSSESocketFactory.getStore(JSSESocketFactory.java:282)
     at org.apache.tomcat.util.net.jsse.JSSESocketFactory.getKeystore(JSSESocketFactory.java:222)
     at org.apache.tomcat.util.net.jsse.JSSE14SocketFactory.getKeyManagers(JSSE14SocketFactory.java:141)
     at org.apache.tomcat.util.net.jsse.JSSE14SocketFactory.init(JSSE14SocketFactory.java:109)
     at org.apache.tomcat.util.net.jsse.JSSESocketFactory.createSocket(JSSESocketFactory.java:88)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.initEndpoint(PoolTcpEndpoint.java:292)
     at org.apache.coyote.http11.Http11BaseProtocol.init(Http11BaseProtocol.java:138)
     at org.apache.catalina.connector.Connector.initialize(Connector.java:1016)
     at org.apache.catalina.core.StandardService.initialize(StandardService.java:580)
     at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:791)
     at org.apache.catalina.startup.Catalina.load(Catalina.java:503)
     at org.apache.catalina.startup.Catalina.load(Catalina.java:523)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:266)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:431)
Sep 29, 2007 2:41:32 PM org.apache.catalina.startup.Catalina load
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed: java.io.IOException: Keystore was tampered with, or password was incorrect
     at org.apache.catalina.connector.Connector.initialize(Connector.java:1018)
     at org.apache.catalina.core.StandardService.initialize(StandardService.java:580)
     at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:791)
     at org.apache.catalina.startup.Catalina.load(Catalina.java:503)
     at org.apache.catalina.startup.Catalina.load(Catalina.java:523)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:266)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:431)
<h6>what i am doing wrong? : ( </h6>

Try specifying RETURN instead of 'changeit' when asked the password for <aaaa>, and make sure that Tomcat knows the password of the keystore, however that's done - some configuration entry (don't ask me).

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks

Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please help

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

TS4006 I have a problem, I locked my MacBook Pro "mountain lion" with the find my iPhone app. When I returned home to unlock my MacBook thats where the problem began. I was unable to unlock the MacBook with the code I then called apple they cou

I've been locked out my MacBook Pro, I was able to lock the MacBook with the find my iPhone app but I'm unable to unlock it with the app or by punching in the code directly to the MacBook, so far the apple store or reps over the phone can not help. I've called a third party retail store for assistance and the tell me I have to pay, even if I get it to work or not... So far nothing these apple "genius" will do to help with this product solution.
I know my passcode/password but I am not able to log in....
Is there anyone that can help?

I would guess the fan is the cause of the noise. Suggest you take a look at it.
This site has a wealth of information about getting inside a Macbook or Macbook Pro.
http://www.powerbookmedic.com/mac-repair.php

Unable to unlock encrypted disk images created with Snow Leopard using Lion

Anyone else unable to unlock encrypted disk images created with Leopard and Snow Leopard with Lion? I know that they made changes with the release of FileVault 2 on Lion and Snow Leopard cannot use Lion encrypted disks but I thought it was backwards compatible where Lion should still be able to work with Snow Leopard created images (it was in the pre-release versions of Lion).
When attempting to mount an encrypted disk image created with Snow Leopard on Lion the normal password prompt appears but then just reappears every time the password is entered and does not unlock and mount the image. I'm positive the correct password is being entered and it works just fine when done on a machine running Snow Leopard.

Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
(67955)

HT4994 we're sorry we are unable to continue with your activation at this time? After unlocking my iPhone 4s and trying to restore it to let the SimCard Work.

I unlcked my iPhone via Telenor like 1 hour ago, and it says i have to restore the phone thru iTunes, when i try to do that and are wrtiting my pin.code after its done, i get this msg. we're sorry we are unable to continue with your activation at this time.
I just have to try again later or what?

KiltedTim
Sorry but i have seen your reply in this same issue in a lot of thread by keep saying this is jailbreaking or unlocking problem,
but this issue happen on Factory Unlock Phone and even iTouch and iPad...
So i don't think u actually are helping by keep saying same thing again n again, while the problem could be from another thing...
Here we got 1 succesful user that experienced same issue but managed to fix it :
https://discussions.apple.com/thread/3928478

Unable to find the Add-on SAP_BS_FND Keep with Vendor Key

I am upgrading from EHPI Support Pack Stack 3 to Stack4, I am now stuck at the Configuration stage of the roadmap phase IS_SELECT - Keep the present version of the add-on (Keep (with vendor
key)). I wanted to keep the add-on SAP_BS_FOUNDATION with Stack 3 asthere is no Stack 4.
How to find the Key information or the note. Also please find the attached Screenshot of the same.
Regards,
Karthik Ravoori

Hi Mukesh Kakani,
In case you have installed an SEM, E-Recruiting or SAP Learning Management system, which technically means that an SAP ERP software component (ERECRUIT, SEM-BW, FINBASIS or LSOFE) is installed in your SAP NetWeaver system, you must not use a stack configuration file created for an SAP ERP system. Instead, you have to use a stack configuration file for SAP NetWeaver (either downloaded from SAP Service Marketplace or created by SAP Solution Manager Maintenance
Optimizer)."
So you qualify in this pre-condition: you have SEM-BW and FINBASIS installed on your NetWeaver system
"Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP system in SMSY in order to download the EHP packages and to be able to maintain the system. Afterwards you must not use the generated Stack XML, but instead use a generated Stack XML from SAP Service Marketplace and include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0."
In order to for you to proceed, you are able to apply SP4 using SPAM and JSPM. But when upgrading the next system in your landscape, please alternate XML file as proposed above. This will prevent the installation of the ECC component SAP_BS_FND and avoid the reoccurance of this issue.
Regards
Karthik Ravoori

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

I am only able to choose mute and rotation unlocked or locked rotation but with mute off. Why? How to have both?

In order to have rotation unlocked the mute has to be checked off. To have mute off, I have to choose locked rotation. How do I get sound and rotation? Volume works on music but not games. Volume is up on the side and on task bar. Help?

Hi Plyrwiz,
The Lock Rotation/Mute option is simply to set how the switch just above your volume button will be used. If you set it to Lock Rotation, then when it is in the Up position, it will lock your screen and prevent it from rotating when you turn the device sideways. However, if it is in the Down position it will have the Rotation unlocked, so the screen will rotate when you turn the device.
Likewise, if you have it set as a "Mute" button, then when it is Up the volume will be muted, and when it is down, it will not.
Savvy?
GB

System unable to unlock login keychain

I had a very unfortunate problem with adware this morning and used Adwaremedic to remove it. The program prompted me to restart after removing the adware. Now when I log in to my account I have two windows -- one tells me the system was unable to unlock my login keychain and gives me three options: continue login, create new keychain, and update keychain password. The other window says 'calendaragent wants to use the login keychain'. If I hit cancel, then it pops up again with different programs that want my login keychain such as addressbooksourcesync or com.apple.icloudhelper.xpc. I'm not sure whether or not I should trust this and put in my password.
Anyone here had a similar experience?

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

FCO-00011 The step runRADDBDIF with step key

hi all
I got the error message when installing process in RUN ABAP report
ERROR 2009-02-14 21:11:25.859
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Regards,
Kevin

Hi Sunny
thanks you reply
but how can I uninstall the instance?
and that means I should entry any password in DDIC?
attached with the error message as followings:
ERROR 2009-02-16 10:17:43.093
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
INFO 2009-02-16 10:17:43.093
RFC connection closed.
ERROR 2009-02-16 10:17:43.109
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
ERROR 2009-02-16 10:17:43.140
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
Regard
Kevin

Help me!!! I can't activate my iphone 3gs!!! iTunes say: Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care! What me do?! =((((

Help me!!! I can't activate my iphone 3gs!!!
iTunes say: Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care!
What me do?! =((((
Help me!!!
AT&T are unlock my phone, official!!!

1) Check your iTunes account.
2) you have to be at your computer. Apple is very smart, the place you put your I'd or password is not near data base.
3) make sure your ID and Password is correct. When type on the phone, if you don't check you might press the wrong key some time cases where people have long Neil.
4) go to apple website n reset the I'd or password.

Unable to unlock with mute key

Similar Messages

Maybe you are looking for