Unable to unzip of Oracle11gr2 zip files

Hi
i am going to install Oracle11gR2 installation on AIX 5.3 TL10 SP4
but i am unable to unzip file getting below error
# unzip aix.ppc64_11gR2_database_1of2.zip
Archive: aix.ppc64_11gR2_database_1of2.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of aix.ppc64_11gR2_database_1of2.zip or
aix.ppc64_11gR2_database_1of2.zip.zip, and cannot find aix.ppc64_11gR2_database_1of2.zip.ZIP, period.
Thanks
With Regards
A-Z
Edited by: user3308982 on Jun 18, 2011 11:45 AM

With every Oracle download and instructions I am gettting more and more annoyed!!!
On the official note Oracle RDBMS OTN Downloads: Files, Sizes and Directions [ID 209555.1]
this is what it says:
+*<Moderator Edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
But where does it say I need to unzip it on the AIX box?
ALso I don't have "unzip" when AIX is shipped. The only version of "unzip" I have was the one I got from Oracle9, which I then copied to my Oracle10 installation.
In the past they used to give us .tar file, the most possible simplest of format easy to use. I would unzip the file in Windows, do a binary transfer - job done.
Was anyone thinking when preparing those files?
Why are the instructions on the Oracle note so vague?
At last, one needs to check the ulimit and add the fsize to the account in /etc/security/limits
oracle11:
fsize = -1
data = -1
stack = -1
After that "unzip <fie> "
NO OPTIONS NEEDED!!!
-t means test on my version of unzip.
Regards,
Richard

Similar Messages

How do i unzip a pages.zip file?

Whenever I export a .pages file from PAGES it converts it to a pages.zip file. I find it impossible to unzip these files to recover the original document winzip and other unzip apps produce about dozen files none of which are the original document. What am I doing wrong?

The zip files contain a compressed folder; Pages uses a package structure for its documents. Unless you specified a format other than Pages when saving or exporting it, it's not meant to be opened from outside of Pages.
(104438)

How to unzip a encrypted zip file in unix

Hi Experts,
when i am trying to unzip a zip file in unix. error showing given below
$ unzip -o -P yareea 46 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip
Archive: 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip may be a plain executable, not an archive
unzip: cannot find zipfile directory in one of 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip or
20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip.zip, and cannot find 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip.ZIP, period.
plese do needful.. its urget...
Regards,
Sri.

hi,
I tried with renaming of file
$ mv 20120119_134107~20120118_000101.CUST_RFRSH_RESP.DNB.20111130.TXT.zip file.zip
$ unzip -P Marketintelligence2 file.zip
Archive: file.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: file.zip may be a plain executable, not an archive
unzip: cannot find zipfile directory in one of file.zip or
file.zip.zip, and cannot find file.zip.ZIP, period.
eventhough its giving same result.

Unable to open/install a zip file get adobe reader error

error says Adobe Reader could not open ?????.zip because not supported of damaged Help???

Are you double clicking on a Zip file when you get this message? If so, you need to set your file associations so that the proper application opens them.
Here's how (for Windows): Zip files open the wrong program (Windows 8, Windows 7, or Windows Vista) - WinZip Computing :: Knowledgebase

Can not Unzip oracle 11g zip file for x64

Hi,
I have downloaded oracle 11g file from (window 2008 server with x64)
http://www.oracle.com/technology/software/products/database/oracle11g/111060_win64soft.html
File Name win64_11gR1_database_1013.zip
when i try to unzip this file I got an error like:
Archive: win64_11gR1_database_1013.zip
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive.unzip: cannot find zipfile directory in win64_11gR1_database_1013.zip,and cannot find win64_11gR1_database_1013.zip.zip, period.
error indicates me towards two ways
1] File is invalid - I have downloaded same file twice
2] File is distributed in multiple files- site have only downloadable link
Can any one please help me to get out of it?
Thanks and Regards
B.Sandeep

If you are really on Windows 2008, this file is wrong , you need
Oracle Database 11g Release 1 (11.1.0.7.0)
for Microsoft Windows Server 2008 x64
Of course that doesn't necessarily solve your general unzip problem, compare the size of the downloaded file with the size on the download site. If there's a difference,download is not complete for whatever reason.
Werner

Unable to share ai or zip file. Chrome/Safari/Firefox

Hi
I can't share a file within my CC account.
I'm getting a console error;
Uncaught TypeError: Cannot call method 'split' of undefined model_asset.js:1
CCweb.model_asset.CCweb.model_asset.Backbone.Model.extend.generateShareUrlmodel_asset.js:1
CCweb.model_asset.CCweb.model_asset.Backbone.Model.extend.parsemodel_asset.js:1
av.Modelbackbone-1.0.0.js:1
dbackbone-1.0.0.js:1
eactions.js:1
shareactions.js:1
Fitem.js:1
atbackbone-1.0.0.js:1
av.Events.triggerbackbone-1.0.0.js:1
CCweb.view_context_menu.Backbone.View.extend.handleSelectview_context_menu.js:1
b.event.dispatchjquery-1.9.1.js:9597
v.handlejquery-1.9.1.js:9597
I try to send link but nothing happens. See attachment.
I've tried from Chrome/Safari and Firefox (Mavericks) ai (435k) and zip (377k) files with no success.
Please advise.
Thank you
Darren.

Hi Darren,
Sorry to hear about your difficulties. I'm following up with our engineering team to see why this is occurring and will following up with recommendations.
Thanks,
- Dave

I unzipped an email zip file in Winzip and its a PDF. Now, I can't get it intoo Adobe to get it into Adobe to see the PDF.

how can I see this PDF on my iphone 5s?

Thanks
Can't copy or move unzipped PDF file.
Can't see option to export unzipped PDF from Winzip app to Adobe app on iPhone 5s.
Mike
GMT

ZIP file nightmare-please help! :-0

Hi all, I am hoping tha someone can help me?
I am trying to downloads pictures from a website to upload to my own business website ( with permission) The pictures download as a ZIP file and I have not yet found a way of opening them.
This problem is costing me money as I am unable to upload products to show to my customers.
Any help would be most appreciated.

Generally speaking, all you need to do to unZIP a blah.zip file is double-click it.

Corrupt ZIP files in Prod 11.1.2.1 - Workspace

Hello all,
This one has me and Oracle Support stumped.
Only Prod is exhibiting the following issue...
When exporting reports to a ZIP file, the file becomes corrupt, and gives an error when extracting with Windows. But what actually happens is that a file with the same name and NO extension (i.e. REPORTS) is in the REPORTS.ZIP file. This is what is causing the zip file to corrupt.
The workaround is to extract the file using 7-ZIP, rename the REPORTS file to REPORTS1.ZIP, save it, then unzip the REPORTS1.ZIP file.
This REPORTS1.ZIP has the reports that were zipped initially in Workspace.
Any ideas what may be causing this? No other environment has this issue.
Thanks in advance!!
--Ed

ZIP file seems to be corrupted. You must repair the file first. Do repair the file by using WinRAR program.
Open WinRAR *>* open ZIP file *>* go to Tools *>* select Repair archive *>* Browse the path *>* check the box Treat the corrupt archive as ZIP *>* click on OK *>* wait for a while once the selected file is repaired *>* click on Close.
Or if this solution fails to repair the file, then you must take help of third-party ZIP recovery software. A wide range of ZIP recovery software are available on the internet. Check few of them. You can use their demo version first. I can recommend you SysInfoTools ZIP Recovery software. You must try its free demo version before buying any other ZIP recovery software.
Regards.

Cannot untar a tar zip file

I'm initially a linux user, now trying to chnage to solaris server. I found a problem untaring a tar zip file. There is no command 'gzip' or 'gunzip' in my solaris server. And for the tar command, there is no option '-z'. So, how can I untar and unzip a tar zip file?

Hi ,
What Solaris Version you are using? On www.sunfreeware.com site, once you choose correct operating system version you may see all utilities on right side at bottom. There are some in pkgadd format.
e.g gzip 1.2.4-sol26-sparc-local is in pkgadd format for Solaris 2.6.
You will find similar files for Sparc/Intel for all vesions.
Download same.
#pkgadd -d gzip 1.2.4-sol26-sparc-local
This will install all you needed. I hope this will help you.
Thanks,
SdD

Extract the zip file

Today I tried to unzip my own zip.file but encountered some problem which never happened before, everytime it says "There is already a folder with same name as the file name you specified. Specify a different name" But i coundn't find a single place to change the file name! I am so confused right now! BTW, I zipped the project from a Mac and now I am trying to unzip it on Windows.
Thanks!

zxcvbnm wrote:
I am sorry, but this is an emergency and I have open it within two hours! Please help!I don't care.
Again is this a java question?
Despite the fact that I don't care that it is an emergency I might actually provide an answer if you actually answered my question.
Conversely since you didn't, you now run the risk of me not answering it because, which is why I asked the question in the first place, you didn't provide enough information to provide a correct answer. Answering my question would help to do that.

Unzip a password protected file in java where the passwd is known

How do i unzip unzip a password protected file in java n the password is known.
Unzipping a simple zip file in java can be done thru Zip package but it provides no option for password protected files.
If anybody knows plse help me out.

You can't with Java standard classes.

Unable to unzip oralce 11g files in windows(32 bit) xp sp2

Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????

865053 wrote:
Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (32-bit)
win32_11gR2_database_1of2.zip (1,625,721,289 bytes)
win32_11gR2_database_2of2.zip (631,934,821 bytes)
Directions
1. All files are in the .zip format. There is an unzip utility here if you need one.
2. Download and unzip both files to the same directory.
3. Installation guides and general Oracle Database 11g documentation are here.
4. Review the certification matrix for this product here.
refer the linK:-http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win32soft-098987.html
as mentioned earlier, check size of the download zip file with above mentioned bytes. else try to download again.
while downloading, do not pause the download in the middle and continue it will corrupt the oracle software.
if you use any download manager dont pause/stop.
Good Luck.

Application Loader unable to unzip .ipa file

I am developing under Flash Professional CS5, working on a PC. Using the development distribution files, my application builds and I can run it on iPhone, iPad, and iPod. Now I am trying to get it to the App Store. I have a distribution certificate which I got before Apple pulled the plug, and was able then to just change the extension to .zip and upload to the App Store (where of course it got stuck until now). This week I rejected my binary in the store, and built an updated version. You can't just upload to the App Store any more; you need to use the Apple Application Loader. This, of course, only runs on a Mac. So, I downloaded and installed the latest version on my Mac. transferred the .ipa to a memory stick, and gave it to the Loader.
I get this curt message "Unable to unzip application"
I have tried renaming it to .zip.
I have tried extracting the Payload and zipping that up again (different error but still no good)
Has anyone else got any applications built on a PC uploaded recently? Please tell what you did

I had almost the same problem. I'm on OS X though. I have my issue solved but it took a lot of trial and error. There were enough clues on this thread though to get me there so thanks everyone. Here's what I went through and what I've discovered:
I compile with Flash CS5
(I was trying Christian's way on the commandline but I forget why I couldn't get it to work, must try it again now. ref:
http://blogs.adobe.com/cantrell/archives/2010/09/packager-for-iphone-refresher.html)
This creates my .ipa file. I don't know if I need to use the commandline, but I did in order to rename the .ipa file to a .zip file. I then double clicked the .zip in the Finder which unzips it with the default OS X app, not 7 zip or something third party. This produces a folder called Payload. If my swf is set in Flash to publish to Main.swf, then inside Payload I see Main.app
I zip Main.app by right clicking it in the Finder and select the Compress option, again, default OS X compression stuff.
This is the correct way to create the ipa file, and produce the kind of zip file that Application Loader wants.
Along the way, I encountered some other distracting problems. I'll explain those now, but they are not related to the actual ipa/zip/unzip problem.
I had two errors, one about a bad bundle ID. This was in fact a typo I had by one letter. In my case it was ca.abcd.abcs in iTunes Connect, and in Flash CS5's settings, it was ca.abcd.abc. That was a forehead slapper I tell you.
The other error was my app not being signed with a proper certificate. I knew I was using my app store certificate, not my dev certificate (this is important btw). I tried revoking my certificate in the app store as @JimmyInteractive mentioned, but I don't think in my case this was necessary. I still had the same issue after revoking. Avoid this if you can because it's a pain in the a$$ to set up all your provisioning profiles again on iTunes Connect and in Keychain, XCode etc. Prior to trying to get everything up onto the app store, I had of course been developing on my personal device, with my developer certificate. What I forgot to do for app store distribution, is in Flash CS5 change Certificate to my app store .p12 file. I still had it set to my dev .p12 file. Doh!
After I did that and figured out the zipping stuff it all worked. Hope this helps!

Why won't my mac won't unzip downloaded zip files anymore?

ive been using my mac to unzip zip arhcive files ive downloaded from the internet and for the past few months ive had to troubles at all. but more recently my mac wouldnt actuallty zip the files. so i started using a free application in the app store called stuffit expander. but now even stuffit expander wont unzip my files. what is happening? the stuffit expander just says it is unable to recognize the file type which makes no sense, and when i use the default unzip application already on my mac it just turns the zip file into a file with the extension .cpgz

Solved
All you need to do is go to: ~/Library/Preferences/ (⇧⌘G)
find and delete this plist: com.apple.archiveutility.plist
Restart your mac.
Try any zip, Enjoy!
P.S. Dont worry, system will generate new working plist as well

Unable to unzip of Oracle11gr2 zip files

Similar Messages

Maybe you are looking for