Unable to unzip oralce 11g files in windows(32 bit) xp sp2

Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????

865053 wrote:
Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (32-bit)
win32_11gR2_database_1of2.zip (1,625,721,289 bytes)
win32_11gR2_database_2of2.zip (631,934,821 bytes)
Directions
1. All files are in the .zip format. There is an unzip utility here if you need one.
2. Download and unzip both files to the same directory.
3. Installation guides and general Oracle Database 11g documentation are here.
4. Review the certification matrix for this product here.
refer the linK:-http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win32soft-098987.html
as mentioned earlier, check size of the download zip file with above mentioned bytes. else try to download again.
while downloading, do not pause the download in the middle and continue it will corrupt the oracle software.
if you use any download manager dont pause/stop.
Good Luck.

Similar Messages

Unable to compile Pro C file in windows

Hi
I have installed oracle 11g rel1 in windows XP. But the problem is i am unable to compile Pro C file to produce executable. It is able to convert pro c file to .c file. But not able to produce any executable. My installation did not installed pro c GUI either. nor any demo file of pro c is available under precomp/ folder. Has this installation gone wrong or how can i produce executable?
Thanks
Sas

y dont u try this...i m not sure if its a right way to do things, but seems like it can work
$ORACLE_HOME/bin/proc test.pc
cc -I${ORACLE_HOME}/precomp/public -c test.c
do : find /cisa -name "*clntsh*" -print
say u get sumthing lyk this
$ORACLE_HOME/lib32/libclntsh.so.10.1
// instead of this:
cc -o test test.c -L $ORACLE_HOME/lib -lclntsh
write:
cc -o test test.c -L $ORACLE_HOME/lib $ORACLE_HOME/lib32/libclntsh.so.10.1
so u r directly refering to the library while linking

REP-0118 Unable to create a temporary file in "Windows 7 "

We are using Report Builder Version 6.0.8.24.0 and Windows7 32 bit operating system, here
While Running a Report through form i am getting this below
error.
REP-0118 Unable to create a temporary file*
But while running the same report in a windows 98 or windowsXp PC
i dont get this error.
What might be the problem.
pls advice the solution....
thanks in Advance...
Stalin...

try this..
REP-118: Unable to create a temporary file.
Case 1: The environment variable that determines in what directory to create temporary files is set to an invalid directory.
Case 2: There is not enough free space on the disk to create the temporary file.
Case 3: A temporary file that cannot be modified already exist
In regedit under branch hkey_local_machine/software/oracle/<oracle home>
I have changed the variable REPORTS_TMP. I changed the value for this to c:\reports_tmp
or you can use something like this where you want Oracle reports to create temp files. Hope this helps

Unable to start OBIEE 11g Sevices on Windows 7

Hello,
I have successfully installed OBIEE 11g server on windows machine 64 bit
When I start BI services from all programs I get following error :
SVR_GRP =
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intr
insics
WLS Start Mode=Production
CLASSPATH=C:\MWH\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\MWH\Oracle
BI1\bifoundation\jdbc\jdk16\bijdbc.jar;;C:\MWH\patchwls1035\profiles\default\s
ys_manifest_classpath\weblogic_patch.jar;C:\MWH\ORACLE~2\jdk\lib\tools.jar;C:\MW
H\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\MWH\WLSERV~1.3\server\lib\weblogic.ja
r;C:\MWH\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\MWH\WLSERV~1.3
\server\lib\webservices.jar;C:\MWH\modules\ORGAPA~1.1/lib/ant-all.jar;C:\MWH\mod
ules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\MWH\wlserver_10.3\server\lib\weblogic.j
ar;C:\MWH\oracle_common\modules\oracle.dms_11.1.1\dms.jar;C:\MWH\oracle_common\m
odules\oracle.jmx_11.1.1\jmxframework.jar;C:\MWH\oracle_common\modules\oracle.jm
x_11.1.1\jmxspi.jar;C:\MWH\oracle_common\modules\oracle.odl_11.1.1\ojdl.jar;C:\M
WH\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\MWH\ORACLE~1\soa\modules\oracle.s
oa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\MWH\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.
jar;C:\MWH\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\MWH\WLSERV~1.3\server\
lib\xqrl.jar
PATH=C:\MWH\patch_wls1035\profiles\default\native;C:\MWH\WLSERV~1.3\server\nativ
e\win\x64;C:\MWH\WLSERV~1.3\server\bin;C:\MWH\modules\ORGAPA~1.1\bin;C:\MWH\ORAC
LE~2\jdk\jre\bin;C:\MWH\ORACLE~2\jdk\bin;C:\Program Files\Java\jdk1.7.0_13\bin;C
:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Windows\system32;C:\Windows;C
:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\MWH\Oracl
e_BI1\products\Essbase\EssbaseServer\bin;C:\MWH\Oracle_BI1\bin;C:\MWH\Oracle_BI1
\opmn\bin;C:\MWH\Oracle_BI1\opmn\lib;C:\MWH\Oracle_BI1\perl\bin;C:\Program Files
\Java\jre7\bin;C:\Program Files\Java\jdk1.7.0_13\bin ;C:\Program Files\Java\jdk1
.7.0_13\bin;C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Windows\system32
;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
;C:\MWH\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\MWH\Oracle_BI1\bin;C:\M
WH\Oracle_BI1\opmn\bin;C:\MWH\Oracle_BI1\opmn\lib;C:\MWH\Oracle_BI1\perl\bin;C:\
Program Files\Java\jre7\bin;;C:\MWH\WLSERV~1.3\server\native\win\x64\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.
Starting WLS with line:
C:\MWH\ORACLE~2\jdk\bin\java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -
XX:-UseSSE42Intrinsics -Dweblogic.Name=AdminServer -Djava.security.policy=C:\MWH
\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -D
oracle.home=C:\MWH\Oracle_BI1 -da -Dplatform.home=C:\MWH\WLSERV~1.3 -Dwls.home=
C:\MWH\WLSERV~1.3\server -Dweblogic.home=C:\MWH\WLSERV~1.3\server -Dcommon.comp
onents.home=C:\MWH\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Lo
g=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\MWH\USER_P~1\doma
ins\BIFOUN~1 -Djrockit.optfile=C:\MWH\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket
optfile.txt -Doracle.server.config.dir=C:\MWH\USERP~1\domains\BIFOUN~1\config\
FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\MWH\USER_P~1\domains\
BIFOUN~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\MWH\USER_P~1\domains\BIF
OUN~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\MWH\USER_P~1\domains\BIFO
UN~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\MWH\USER_P~1
\domains\BIFOUN~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\M
WH\USER_P~1\domains\BIFOUN~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.
app.ext=\- -Dweblogic.alternateTypesDirectory=C:\MWH\ORACLE~1\modules\oracle.oss
oiap_11.1.1,C:\MWH\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.ha
ndler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.ora
cle.home=C:\MWH\Oracle_BI1 -DEPM_ORACLE_HOME=C:\MWH\Oracle_BI1 -Dweblogic.MaxMes
sageSize=50000000 -DEPM_ORACLE_HOME=C:\MWH\Oracle_BI1 -DHYPERION_HOME=C:\MWH\Ora
cle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=C:\MWH\Oracle_BI1 -DEPM_RE
G_PROPERTIES_PATH=C:\MWH\USER_P~1\domains\BIFOUN~1\config\fmwconfig -Depm.useApp
licationContextId=false -Doracle.biee.search.bisearchproperties=C:\MWH\Oracle_BI
1\bifoundation\jee\BISearchConfig.properties -Dweblogic.management.clearTextCred
entialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dwebl
ogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enable
JSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.searc
h.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee
.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=C:\MWH\use
r_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_DIR=C:\MWH\
Oracle_BI1\common\fonts -Drtd.instanceName=RTD_AdminServer -Dem.oracle.home=C:\
MWH\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true
-Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false
-Dweblogic.ext.dirs=C:\MWH\patch_wls1035\profiles\default\sysext_manifest_classp
ath weblogic.Server
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.
C:\MWH>
I have installed OBIEE 11.1.1.6.0 version and Java version
java version "1.7.0_13"
Java(TM) SE Runtime Environment (build 1.7.0_13-b20)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)
Any suggestions ?? Where am I going wrong ??

faisalm wrote:
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.Check your environment variables and make sure your java/bin path is correct.
go to command prompt and type in SET PATH
C:\MWH\ORACLE~2\jdk should be java home
Make sure path is C:\MWH\ORACLE~2\jdk\bin;
HTH,
SVS

Unable to create a catalog file for Windows 10 Enterprise (9926) using latest ADK

Has anyone successfully created a catalog file for Windows 10 Ent. Preview build 9926? Ii get persistent failures attempting to do so. Log output is below and any hint would be greatly appreciated.
7:20 AM : This application requires version 6.3.9600.16384 of the Windows ADK.
Install this version to correct the problem
7:33 AM :
7:33 AM : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows ADK User's Guide.
7:33 AM :
7:33 AM : System.ComponentModel.Win32Exception (0x80004005): Unknown error (0xc1420117)
Server stack trace:
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PostCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CatalogCreatorImpl.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.ICatalogCreator.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at Microsoft.ComponentStudio.CatalogGenerator.CreateCat(ProgressDialog pd, Object o)

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Unable to install Oracle 11g R2 on Windows 8

Hi All,
I know this is a familiar post with quite a few users facing problems while trying to install Oracle 11g R2 on Windows 8 platform. Subsequently, there have been resolutions provided - Hyperion Error of the Day: Oracle Database 11g Installer Disappears After Prerequisite Checks.
I am facing a similar problem - the installation window disappears after I select the "Select Class Option" as desktop. I tried following the steps which have been advised, but to no success. I would like to make a point here - The Operating System that I use is - Windows 8 Single Language, which is different from Windows 8 Enterprise Edition. Plus, the java I use is:
java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) Client VM (build 24.45-b08, mixed mode, sharing)
Kindly Help.
With regards
Sriram

Hi,
The solution provided in this link worked. Hyperion Error of the Day: Oracle Database 11g Installer Disappears After Prerequisite Checks
Even though I installed java in c:\java, I got the same error, but calling setup.exe from command prompt and setting the jreLoc path has worked.
Eg: on command prompt, I gave below command and it worked,
D:\downloads\database>setup -jreLoc "C:\Java\jdk1.7.0_51"
D:\downloads\database -> is path setup.exe location
Thanks,
Srikanth

Unable to unzip 9i download files

Has anyone had any trouble unzipping the 9i files once they were downloaded. I get the message:
Can't open file: it does not appear to be a valid archive.
I have attempted to unzip using Winzip and Winrar without any success. I am running 2000 server with a P-3 processor.
Any suggestions will be appreciated.

The files are good but you have probably been knocked off before you completed the download. Please see our FAQ which recommends some download managers: http://otn.oracle.com/software/htdocs/downloadFAQ.html
Regards,
OTN Team

Unzipping Oracle 11g R2 for Windows Download

I downloaded Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64) from here:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Here are the instructions right off of the website:
1. All files are in the .zip format. There is an unzip utility here if you need one.
2. Download and unzip both files to the same directory...
When I extract the files both have the same basic structure:
c:\shared\win64_11gR2_1\
c:\shared\win64_11gR2_2\
The two folders contain a database folder with a stage folder inside:
c:\shared\win64_11gR2_1\database\stage\components - other folders DO exist in this stage folder
c:\shared\win64_11gR2_2\database\stage\components - other folders DO NOT exist in this stage folder
If I try to extract the files to the same directory (as indicated in step 2 above), the two stage\components folders cannot exist in the same folder at the same time...
c:\shared\win64_11gR2_extracted\database\stage
c:\shared\win64_11gR2_extracted\database\stage
I am not sure if the second file of the download is even needed. What am I missing?
Thanks for any help. :) Thomas

So two files you downloaded
win64_11gR2_database_1of2.zip
win64_11gR2_database_2of2.zip
unzip tools at the download page are for other operation systems not for windows.
with e.g. 7zip I can easily un-extract both files in the same directory. (using right click extract here)
Both files are required. Because the second file has additional components which will be extracted into/under "database/stage/Components" dir...

Unable to unzip the downloaded files

So that we may better diagnose DOWNLOAD problems, please provide the following information.
After downloaded the 9i for Windows (disk1,disk2,disk3). I cnnot unzip the file. I get the foloowing message from WinZip message box: "The WinZip Wizard cannot open this file; it does not appear to be a valid archive. If you downloaded this file, try downloading again. If you want to add the file to an archive, first create or open the archive, then drop the file again."
I downloaded the file again and still get the same message. What do I need to do? Thank you for your help.
- Server name
- Filename 92010NT_disk1.zip
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg

It is quite easy to solve your problem. Double click your disk1 or anyone of the 3 and right click the zipped folder then click on extract all. Do the same for all the 3 disks. You should find at the end exe file on disk1. Good luck

Lion - unable to read old leopard files on windows server

Hi,
We had a mac which was on Leopard and saved files to the server
The file system we use is a Windows 2008 File Server, this has worked fine with leopard for years
However I understand that Leopard splits the files into resource forks - and that Lion has dropped support for these files.
That particular mac is now on Lion as we upgraded and encountering LOTS of issues
I unable to open or edit lots of the files as i believe chunks of the files are missing.
E.g an .eps file showed as 740KB on leopard - Viewing from a windows PC it was 730kb for the .eps and 10kb for the ._ resource fork.
Now that we are on the LION upgrade, we only see the .eps file and it is only 730kb. Information missing is things such as preview (quark), Font data, type of file, version number
Is there anyways to fix this? we have hundreds! of images, files etc created with leopard and now upgraded to lion they all have become useless!
Rejoining the resource forks and files together so that they are usable on lion
Thanks

You installed the Developer Tools and ran the command line utility fixupresourceforks?
I would think that would work. Can maybe try this as well:
Check to see if the file is already created and if not create it using the first line using touch. If file is already there just run the other two lines following the touch command line:
sudo touch /etc/nsmb.conf
sudo echo "[default]" > /etc/nsmb.conf
sudo echo "streams=no" >> /etc/nsmb.conf
If you have slow browsing and issues create or renaming folders add:
sudo echo "notify_off=yes" >> /etc/nsmb.conf
Then re-connect to server shares or reboot and connect to shares again.

Unable to search within .java files on windows xp

windows Search can't seem to find things in my .java files (like grep) on my Windows XP machine.
Here's what I do: In the windows explorer, I select a folder which has some .java files beneath it, and I select Search off the folder's popup menu. That brings up a dialog that lets me name to file to search for, and also a word or phrase in the file. I enter filename of "*.java" and it finds all the *.java files OK, but if I also enter a value in the "word or phrase in the file" field and do a search, then it always says "0 files found" (I enter a word that I know is in some of the java files). Search finds words OK in .html or .txt files, but not in .java files. Weird.
Is there some setting in the windows registry that affects how searches are done in .java files?

Follow the instructions in this article. I've runinto
the same thing, and the solution works.
http://support.microsoft.com/default.aspx?scid=kb;EN-US
Q309173Thank you. It now works for me too.
PC�Great! Glad at least someone (ok, 2) stopped by to say thanks. OP, hello? Geez, you even put up the 10 dukies as if this is important to you.

Unable to view camera RAW files on Windows 7 and CS4 - Have tried updates

All working OK until 8 days ago, then bridge just disappeared completely. Looked like it had opened but would disappear when I clicked on the icon. Re-installed, Bride now visable but unable to view .CR2 files in camrea RAW or in Photoshop, comes up as "unable to open". Have tried to install the 5.7 camera raw update, extract files, click on application, then photoshop opens and advises "invalid file type". Not sure what to do now and have a large number of weddin files slowly building up .... PLEASE HELP!!

When something works one day, but not the next, then something has changed. The task is to find out what that is.
Have you installed new hardware?
Have you installed new software?
Have you had any major updates installed?
Those are but a few things to ponder.
You might want to create a new System Restore Point (on a PC) for today, and then boot to Safe Mode, choosing System Restore, and choose a point, from at least 8 days before. Reboot, when prompted, and test. At the least, you have only lost a few minutes, as you can Restore to today's System Restore Point. The Mac has something called Time Machine, and I would think that it could do similar, but just do not know, as I am a PC-only guy.
Good luck,
Hunt

When I am running Firefox I am unable to open folders and files with Windows Explorer (Windows 7). This is so frustrating and all attempts to fix have been unsuccesful

There is a clash with Windows 7 and Firefox that prevents one opening files and folders.

Hi Dollie,
I am wondering whether you want to upload multiple documents into SharePoint library once.
If yes, you can try to use Drag and drop feature in SharePoint 2013 to upload multiple documents into SharePoint library.
More information about Drag and drop feature, you can refer to:
http://www.sharepointanalysthq.com/2012/12/drag-and-drop-in-sharepoint-2013/
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to view Mac User files in Windows Bootcamp

I've dual booted my Mac to run both Mac and Windows OS using Bootcamp - However I'm having an issue viewing my user files on my Mac in Windows and I cannot view my user files on my Windows in Mac. This issue is driving me nuts, I have tried checking the drivers and they all updated so I don't know what I'm missing !

Hi Sudan,
Did this happen to all users PC clients?
You can try creating a new following register key with value 30000000 on your client PC, then restart the WebClients service and check results again, please see the following similar article about opening library with large documents in explorer view.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters\FileAttributesLimitInBytes
http://blog.davidjwise.com/2012/06/04/explorer-view-versus-the-large-document-library/
http://support.microsoft.com/kb/912152
Thanks
Daniel Yang
TechNet Community Support

I am unable to access my shared files on Windows 7

My pc finds the MBP files just fine. But when I try to connect usin SMB, it "bounces" when I enter my password. I have checked and re-checked the password, I know it is correct. What else can I do?

Can you please describe the issue with more detail? (ie. Error messages, browser behavior, etc.)
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Unable to unzip oralce 11g files in windows(32 bit) xp sp2

Similar Messages

Maybe you are looking for