Unable to update BIOS or Embedded Controller Program on X40
Hi,
I have an IBM Thinkpad X40 laptop. I currently have BIOS version 1.43 and Embedded Controller Version 1.32. I am trying to upgrade both of these separately using the following programs:
BIOS update (Non-Diskette) - ThinkPad X40
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-53881
Embedded Controller Program (Non-Diskette) - ThinkPad X40
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-53882
I download and run them, go through the 4 step wizard and then the machine reboots. The problem is that it doesn't update the BIOS or the ECP but it also doesn't tell me why or even tell me that it's failed.
Has anyone experienced this issue or know what causes this? I am unable to do this via a diskette because I don't have a floppy drive on this model.
Solved!
Go to Solution.
OK, I've fixed this now.
I had Kaspersky Internet Security installed and had disabled it manually but it was obvisouly still blocking fundamental system changes like these. I uninstalled KIS completely and then ran these updates again and all worked fine.
Similar Messages
-
X23 Bios and Embedded Controller Program Updating
I am trying to update my bios on my x23. I have relatively old versions of both the bios and the ECP, and both say that they won't work without more current version of the other. Which one am I supposed to update first?
thanks,
DavidIt is confusing; on the BIOS page it says update the BIOS first and on the ECC page it says update the ECC first
What I suggest is to look at the table at the very bottom of the pages to see which is compatible with what and carefully work out which, if necessary older, version of what can be installed first untill you reach the current versions of both. It may be possible to leap-frog some of the updates.
Hope I explained that well enough.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Should one update Embedded Controller program before a BIOS update ?
Hello All,
I have an IBM Thinkpad 600E 2645 4AU that has an old version of BIOS that am trying to update to the latest.
I read on the net that before updating the BIOS its required to update the Embedded Controller program.
This is what I read and am quoting :
" It is also important to understand that Thinkpads from IBM have two separate firmwares: the BIOS, and the Embedded Controller program. A given BIOS version will require a certain version of the Embedded Controller program. The IBM documentation is sometimes unclear about the order in which these two firmwares should be updated. On most, but not all Thinkpads, the correct update order is Embedded Controller program first, and then the BIOS. Make sure to do the two updates immediately one after the other. Newer models from Lenovo update both the Embedded Controller program and the BIOS at the same time, so you don't have to worry about it."
Could anyone let me know if this applies ? I searched the Lenovo site for a Embedded Controller program for my laptop model but found none. So wondering if this model would require the Embedded Controller program update ?
Thanks.
AlexOK, I've fixed this now.
I had Kaspersky Internet Security installed and had disabled it manually but it was obvisouly still blocking fundamental system changes like these. I uninstalled KIS completely and then ran these updates again and all worked fine. -
Botched Embedded Controller Program Service Utility upgrade.
Hi,
It seems that I might have a little problem. I've recently started updating my T43 with ThinkVantage Update program and the first couple of updates went like a breeze. Even the new BIOS installed alright. But when I started upgrading Embedded Controller Program Service Utility it suddenly stopped at that gray screen saying that the system was now updating and is telling me not to turn it off in any case. The thing is, it says it should take about 30 seconds while I have been waiting for over an hour but to no avail.
I am a little afraid of turning of my computer, don't really want to damage it. Does any of you have any ideas what should I do in such circumstances? Any help would be much appreciated.with the bios upgrade through windows, the process is quite simple but there is potential for interference from other programs that is going on in the background, this is especially a problem with laptop that have not been maintained properly in terms of regular virus scanning, deleting unwanted programs, keeping background processes to the minimal. For a more secure update, try to do the bios update through the ISO image method.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Determine Version of Embedded Controller Program in T-40
Using the reboot and press the ACCESS IBM button method doesn't reveal which version of the Embedded Controller Program is on the older T-40's. How would I determine if I have the most recent version?
Thanks
T41 2373-7FU
Windows XP Pro, 1.6GHz Pentium M, 2GB RAM, 160GB HDDUsing the reboot and press the ACCESS IBM button method doesn't reveal which version of the Embedded Controller Program is on the older T-40's. How would I determine if I have the most recent version?
Thanks
T41 2373-7FU
Windows XP Pro, 1.6GHz Pentium M, 2GB RAM, 160GB HDD -
Re: Unable to update BIOS on Satellite A660
My Toshiba Satellite A660 laptop's (psaw3a-07t00r) harddrive failed so i bought a new one (WD500BEVT) when i put it in the laptop and try to install windows it tells me
"This computer's hardware may not support booting to this disk, ensure that the disk's controller is enabled in computer's Bios menu"
In the bios the only option i could find related is the SATA Controller Mode which when changed to Compatibility it will not boot from the disk and just shows a blank screen.
So i thought i would update the bios, i borrowed a harddrive from a friend and installed windows to it along with all the current drivers and toshiba programes but when i try to update the BIOS it tells me
The programe will be closed
There is an error occured, Please check below items.
Bios version is above 230.
Battery capacity more than 20%.
AC is attached
So i'm not sure what the issue is as i have the power attached and that battery is full.Hi xaver
Thank you so much for your reply.
I bought the laptop second hand and it had a seagate 160gb harddrive in it i forget the model number. i dont see any reason why the new harddrive will not work :( as it works fine in my friends laptop which is the one i'm using the current harddrive from.
Yes i have tried setting defaults and also other solutions found on the microsoft website that did not help at all :(
Anyway i will buy a different harddrive, can you suggest one?
Also i am very interested in why the bios update will not work could this be a problem with the computer?
Thanks, Paul
Message was edited by: pdaws7 -
Satellite P100 PSPAD: Unable to update BIOS 3.8 and poor video performance
Hello,
I have absolute shoddy video performance on my machine as well as the fan on/off issues.
To add to my frustrations the WinPhlash programme included in BIOS version 3.8 dumps out when trying to flash giving a PHLASHNT.SYS unable to load message with various error codes associated with it (codes 5 and 147 depending on if I run the exe as it is extracted from the ZIP, or run the extracted files independantly).
I have checked all permissionings on the folder and I definately have full control - but still a generic "check your accounts, if you have no permissions please log in again!" message is displayed.
any help with my BIOS issue would be apreciated.
[Edited by: admin on 06-Jul-2007 11:10]Hi,
I have had the same error message on P100 PSPADE and furthermore the laptop was no longer under control, neither by keyboard or by menu impossible to switch off. I have had to unplug and to remove the battery. Then impossible to switch on.
According to the local ASP the motherboard is KO (??) and the safest way to upgrade the bios was to boot from an USB floppy in DOS mode?
Sounds strange but be careful.
Regards -
T431s: unable to update BIOS 1.14 - 1.16.1.04
Hi,
System updater founds new BIOS, version 1.16.1.04, currently I have version 1.14 (9GHET29WW).
However, after starting to download packages, Lenovo System updater returns (always) an error: 1 package did not download.
I have Windows 8.1 with all the latest (except the Apr 2015 security bulletins) updates installed.
What's up?
//timo
Solved!
Go to Solution.We found the problem. We'll try to have it fixed soon. Please try again in a couple days. Sorry for this trouble.
-
Hallo!
Can someone please tell me if it is possible with this development system (as it is) to build applications that will run on Adlink Geme-2000 Embedded Controllers (http://www.smallformfactors.com/products/search/fm/id/?17483) ? They run either with OS WinXPEmbedded or WinCE.NET.
Or will I have to get me any toolkit to be able to do so or won't it work?
Thanx,
StefanDear Stefan
You can run LabVIEW 8.0 on any Windows XP Embedded box.
See this tutorial for a step-by-step explanation: http://zone.ni.com/devzone/cda/tut/p/id/4011.
Best regards
Philipp Roessler -
Embedded Controller update (which is included with the BIOS update) for my T400
I have a T400. That's all I know. I'm supposed to dwonload one of these two updates.
ThinkPad Package version BIOS version Embedded Controller version
T400 (with IEEE 1394 models) 3.09-1.05 3.09 (7UET79WW) 1.05 (7VHT15WW)
or a
T400 (without IEEE 1394 models) 3.10-1.05 3.10 (7VET80WW) 1.05 (7VHT15WW)
How do I know which one?
This answer didn't come with the download directions so a non-techie (me) cannot go further.
Please help me with this.
Thank you,
JohnHi johnslenovo,
To check if you have 32 bit or 64 bit Windows installed do check our KB Article on this.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
T23: problem to update bios
Hi, I have a thinkpad T23 with bios version 1.06 and embedded controller program 1.04.I would like to upgrade the bios by non diskette mode becouse I have not the floppy disk.
I follow the instruction ...next......next........the system reboot and after few second to appears this:
"The diskette in the default drive will not run on the system.Your system is locked.To restart your system press CTRL+ALT+CANC"
This happens also with the update of the embeddet cnntroller program.
Why?? What's wrong? please, someone can 'help me?
thank's
Moderator note: Type added to subject line for clarity.
Message Edited by Agotthelf on 09-05-2009 11:38 AMWelcome to the forum!
It seems to me that you have a Supervisor or BIOS password enabled on your T23.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Correct procedure to update Embedded Controller Programme - T43
Dear Forum,
Could somebody please describe the best way to safely update 'Embedded Controller Programme' in a T43?
- The computer is a Thinkpad T43 1871 PM1 machine
- BIOS Version is 1.29
- Embedded Controller Version is 1.03
- Apparently this is the correct current Embedded Controller Version http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-59439
- Should I boot the machine into safe mode rather than regular startup?
- Should I deactivate my firewall (PCTools), my anti-virus (Avast) and Malwarebytes from running at startup before I shut my machine down?
- Are there any other specific programmes I need to shut down? (eg. IBM Access or any of the IBM updates?)
- Does the controller update require internet access? Or should I also disconnect the computer from the web?
Thank you!! :-)
HarryredknappHi Harry,
There is no need to boot the machine in Safe Mode, and yes it would be good idea to deactivate your firewall and antivirus products for the time being while the controller program is being updated.
When I run BIOS update, I don't turn off any Thinkvantage tools so in my experience they don't interfere with the update process, and as far as I know the controller program doesn't require internet access (if you're doing manual update from the setup saved on your thinkpad).
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Can't update embedded controller
tried different ways including thinkvantage and everytime update will freeze at the update screen. bios update always succeeds. Any clues?. laptop is T43 1871 came with bios 1.23 and embedded controller 1.03. I was able to update the bios to 1.29 but I was always faced with embedded controller 1.05 update screen freeze problem. my question if bios firmware has to match embedded controller firmware and using thinkvantage update why bios update was listed as recommended and embedded controller update listed as optional? TIA.
I'm having the same problem.
Help! -
I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard, what can i do, as i have just paid out money for something which
Worked like a charm and resolved my problem totally. The only issue I had is that, unlike the Computer (Mac OS). the iPad doesn't give constant visibility to what it is doing (feedback), so I wasn't initially sure it had done anything.
When I opened my emailed message with .vcf file attached, and tapped the .vcf attachment icon, I saw activity on the icon for just a few seconds, then it reverted to the original with nothing apparently happening. After about 30 seconds, the secondary menut popped up indicating the transfer of 1200 addresses would be completed, if I approved the action. Another 10 to 15 seconds then transpired before the completed Contact list appeared on the ipad. So you must be patient, if you have a large Addressbook. That's reasonable,but unexpected lack of feedback left me wondering, like so many other things on the iPad.
THank you for the assist. Apparently Apples Mac Genius people did not know this procedure, and I will pass it on to my local Apple Store Instructor.
-- Chuck -
Updating bios in windows 8.1
I'm trying to install a new graphics card (gtx750ti) from ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated power source to 750w. Turn pc on and no video, the pc is working but nothing on the monitor. Had the vid card tested on another machine it works fine, they suggested updating the bios. I'm hesitant to update as there is no windows 8.1 udate, any suggestions?
OS Name Microsoft Windows 8.1 Pro with Media Center
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ROBERT-PC
System Manufacturer HP-Pavilion
System Model FK574AA-A2L a6652f
System Type x64-based PC
System SKU FK574AA#A2L
Processor Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2333 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
SMBIOS Version 2.5
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer PEGATRON CORPORATION
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.3.9600.17031"
User Name Robert-PC\ROBERT-PC\Robert
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 4.00 GB
Available Physical Memory 1.95 GB
Total Virtual Memory 8.00 GB
Available Virtual Memory 5.72 GB
Page File Space 4.00 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions No
Hyper-V - Second Level Address Translation Extensions No
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes
This question was solved.
View Solution.You will need to run the IPIBL-LB Motherboard BIOS v5.43 Update on Windows Vista or Windows 7. It is unlikely that the update will succeed when run on Windows 8 / 8.1. Additionally, this update doesn't address your issue and will not solve your problem.
The GTX 750 Ti graphics card is incompatible with your HP Pavilion a6652f Desktop Computer and its IPIBL-LB (Benicia) motherboard. Current generation graphics cards will not work with your computer and you will need to purchase a graphics card that is one generation old... such as the GTX 650 Ti / GTX 660 Ti.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
.ai overload in Indesign (CS5.5)
We have an InDesign document that is comprised of a few dozen Illustrator line drawings (garments) that have been built individually using layers and are viewed/imported in InDesign through import options and turning off/on said individual layers. T
-
I purchased iphone 4 in UAE and activated and using in India. But Facetime application is not available. How do i get it?
-
Tool Tip is not aligning with data
DBA Developer
-
Including Content fromtext file and transporting
Hi all, my requirement is to include content from a text file into a transport request and transport to required client,but when i create a new transport request i dont find any option to include the contents of my text file into the reque
-
Drop Down Menu Opening another File Script
I am using a drop down menu to generate other information in different selection. I received great help before but have encountered another problem. I have attached a example file. Once the user has selected the offense title and it generates the abo