Unable to update Bridge CS2
When I started Photoshop CS2 I was informed that an update to CS2 was available. I requested that the update be installed. The update proceeded for some minutes and then a message reported that it was unable to update Bridge because to update to version 1.0.4 required version 1.0.3 which was not present. The version actually present is 1.0.0.545. How do I update my Photoshop CS2 so that Bridge becomes version 1.0.3, so that I can complete the current update?
The updater is, to put it politely, a bit dodgy. I would go to the Updates page on this site and find the necessary updates needed there then install them in sequential order.
Photoshop: http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Bridge: http://www.adobe.com/support/downloads/product.jsp?product=108&platform=Windows
Similar Messages
-
Unable to update bridge or photoshop.
I purchased photo shop, bridge and light room pre installed on my laptop direct from Sony. I'm unable to update bridge as the error message appears.
(Bridge is unable to check for updates.
The most likely causes are an inability to connect to the internet or being logged in as a non-administrative user.)
I have asked Sony for help which they haven't been able to provide and I'm connected to the internet. I am also the only user of this laptop. In photo shop it doesn't even give me the option of updating. I am only able to use part of these programs and not view any photos in Raw as I can't download the converter.
Any help or advice most welcome.1.— What does Sony say?
2.—
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Unable to set some dates in Adobe bridge cs2
HI ALL
Our keywording team using the Adobe bridge CS2.
Kindly hep me to understand Why some dates Like
1/1/1970
1/1/1642
1/1/1890
etc .....
I unable to set in ITPC image Tab information .............
LakhanHi
Thanks for revert ......
I tried with CS2 & CS3 but only specific dates like (1/1/1970) i above mentioned is still not reflecting in IPTC image info ........
Please suggest.... -
Attempting to update Bridge CC and Photoshop CC 2014 from the Creative Cloud program generates error "Unable to extract the downloaded files. Press Retry to download again.(U44M1I210). I am running Windows 7. Previous traffic on this topic has not helped my situation.
Please clean AAM cache By deleting following folder contents:
For Mac:
· /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
· C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0
Then try running Updates.
Regards,
Ashutosh -
LR adjustments not showing up in Bridge CS2
When working with .DNG files in LR, it seems that Develop settings show up in Bridge CS3 (beta), but only some show up in Bridge CS2; the same is true for metadata, but only sometimes -- keywords tend to show up, Location, City, etc. don't. Using the "Export XMP Metadata to File" doesn't seem to make a difference.
For example: if I adjust the contrast, then export xmp, I can see the difference in Bridge CS3, but not CS2. But if I change the white balance, the change shows up in both versions of Bridge.
Any thoughts?
Thanks,
MartinBrilliant, Geoff! I had downloaded ACR 3.7 for the DNG converter, but apparently hadn't installed it for Bridge/Photoshop CS2, which were still using 3.6. I used "updates" in the Help menu, and 3.7 was installed automatically. All of the LR adjustments now show up in Bridge CS2.
Thanks!
Martin -
Problems opening NEF files in Bridge, CS2
We recently wiped our hard drive to get rid of a virus and reinstalled Photoshop CS2. Now I cant open RAW files from my NIKON D50 in bridge or photoshop. I've downloaded all the Raw updates for CS2 but it hasnt made a difference.
Any suggestions would be greatly appreciated.neevie wrote:
We recently wiped our hard drive to get rid of a virus and reinstalled Photoshop CS2. Now I cant open RAW files from my NIKON D50 in bridge or photoshop. I've downloaded all the Raw updates for CS2 but it hasnt made a difference.
What did you do with "all the raw updates"?
You only need one and it must be in the correct folder (which is not where you might think!)
More than one copy will almost certainly mess things up. -
My iMac hard drive crashed. I installed a new one and re-installed Photoshop CS5. I am using OS X 10.8.2
Photoshop searched for and found updates and they were all successfully installed. However, I am unable to open Bridge. The mini-bridge function gets hung up on "waiting for bridge". If I attempt to open Bridge from its own icon, it starts the process and then immediately closes.Strange, can you report back the exact version numbers of PS and Bridge. (sorry, misread the update mentioned in first post)
If you change the finder window to column mode and select the icon it will show the info in a column next to the bridge icon.
Can you also provide details about your computer set up (type of iMac, amount of RAM, free space left on the Disk and Graphic card with amount of VRAM)?
You can check this all under the Apple icon top left 'About this Mac'
Does PS work normal on your system and do you have it activated as a full version and not in trial mode?
Did you try to uninstall PS and reinstall again to see if this would work? -
Unable to open Bridge in Photoshop CC V 14.0 x64 get error message “Could not complete the Browse in Bridge command because Photoshop was unable to find the JavaScript plug-in.” need help please.
Larry HinzHello, did you download Bridge CC?
If yes, go to the start it from the start menu, if you are on a PC.
Also, is Photoshop up to date? you should have 14.2 Help>Updates. -
I have just installed CS6 from Disc, this runs fine but i am unable to open Bridge, either from within CS6 or by clicking on the Bridge icon in my taskbar.
I have read many forum discussions on this subject but have yet to find one with a good working answer to resolve the issue.
Is there a reason for the prolem Adobe? is there a fix or update? i have already checked that i have the latest updates running in CS6.
I have checked "task manager" on my windows 7 laptop, and it doesnt show any bridge applications running.
PLEASE HELP, i dont want to use $600 software which i saved up for only to find that a part of it doesnt work.
Any suggestions
AndyHi all,
Well i tried everything that was suggested, including creating an empty folder in the c:\users\user name\app data\roaming\adobe\bridge cs6. Checking my TEMP folder, uninstalling and running adobe script cleaner, re installing, right clicking the bridge.exe and selecting run in compatability mode, pressing shift, control, alt. Launching bridge from within cs6 or on its own.
I even stood on my head and tried it , lol.
But eventually i cracked it................i created a new user account in control panel/user accounts, and it worked. I can now open bridge on its own or within CS6.
So now i have to move all my hundreds of pictures in LR4 to my new user profile. I intend to keep both profiles and just use the "new" one to run CS6 and work on my pictures.
So to cut a long story short dont waste time with all the other suggestions (as good as they are), just go straight in and create a new user profile and bingo.........
i am now so happy after a week of pulling my hair out.
thanks to all that tried to help me as i am sure you eventually let me down the correct path.........
Andy a happy cs6 and bridge user -
Unable to update the ADMPlugin.api
When I try to install the aics2_12_0_1update.exe for my Illustrator CS2 (12.0) I get the error,
"Unable to update the ADMPlugin.api
The file on your system does not match the original Illustrator 12.0 file expected and it cannot be updated."
I have WXP SP3 and the entire CS2 suite installed.
Any ideas?
J.R.>...when I worked for Adobe® Systems.
Are you running a beta version of AI 12 by any chance?
That would certainly explain the error message you're getting. As you must know, Adobe updaters are rigorous in their version checking and won't work on non-retail versions. -
CS2 + Bridge CS2 1.0.4.6 (104504) white thumbnails
Bridge CS2 displays only white thumbnails in all folders. Initial Desktop images show fine, but when changing to folders, all thumbnails are white boxes. Including when I go back to the Desktop - all thumbnails are white. Close Bridge and reopen and the Desktop thumbnails are fine again. Go to Folders, they're all white.
I have uninstalled and reinstalled, purged cache, tried everything I can find to get the thumbnails to display correctly - as they originally did. Sometime during an update things went bad.
Anyone have a solution please. isearched the forum and came up with nothing. I just can't stand going to the file open dialog box to open files instead of using Bridge as I have always done.
Thanks.[email protected] wrote:
> Larry
> for us to process thousands of photos this way would take hours.
Why? Are you talking CPU hours or staff-hours? Does your workflow require heavy
user interaction or is something else the problem?
-X
for photoshop scripting solutions of all sorts
contact: [email protected] -
Unable to update software on mac
I am unable to update software of my phone xperia z 1 on mac.
One post its more than enough, do you have a firewall or antivirus that might be blocking bridge? I have the Xperia Z1 and Z and they connect fine
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Adobe Bridge (CS2) not working. Even after new installation
Hello,
The Problem was, that Adobe Bridge (CS2 on Windows XP) suddenly stopped the work. After several days of trying to get this program to run again, i deinstalled and installed Photoshop with all it´s programms.
But Bridge still is not working anymore. I can visit some folders once or twice, but after 2 tries, it stopps and give no reaction.
What is wrong with Photoshop ?
regardsYou need to reset Bridge preferences by holding
Ctrl+Alt+Shift while starting the program from the icon. You should get a dialog offering three choices select all of them.
This does not happen with a re-install of the program.
If you don't get the dialog box, keep trying till you do. -
OSX: Adobe Creative Cloud unable to update (stall at 50%)
Hey experts,
ever since signing up for Creative Cloud I have been unable to update any application as my regular user on OSX. After exchanging 23 emails with the Adobe support in 2013 I finally gave up and created a workaround in the hope that the Adobe developers would finally look into the issue and fix the bug. With the last update of Creative Cloud my workaround stopped working so I took time to do a complete reinstallation of Creative Cloud to see if the bug was finally fixed. It was not.
The bug:
-Installation of Creative Cloud and Photoshop, Lightroom etc. through the Creative Cloud app works.
-Any try to update a CC applicaton (e. g. Photoshop CC 2014 results in the state "waiting" at 50%):
-Trying to update through the menu of Adobe Photoshop CC 2014 "Aktualisierungen"
resulted in the following error message:
Translation: "Update failed. Unable to apply updates. Adobe Application manager is already running. Close all instances of Adobe Application Manager before applying updates. etc."
What I tried to resolve the problem:
What did not work:
-Complete reinstallation of Creative Cloud:
-Uninstall of all Adobe applications
-Ran the Adobe CC Cleaner tool
-Eliminated every single *[Aa]dobe*-folder on my disk including my profile.
-Reboot
-Re-installation using a fresh CC download.
-The common 1st-level-support acts of desperation:
-Rebooting
-Checking the file system
-Fixing permissions
-The bug even survived 2 OSX system upgrades
-Even tried to track down the bug myself which I gave up after having discovered the endless chain of Creative Cloud and AAM-Processes executing each other...
What worked:
-Installing updates as another OSX user. (Which is cumbersome and to be honest I am unwilling to create a new profile and redoing the settings of all installed (especially non-Adobe) applications because of an Adobe bug...)
Any help will be greatly appreciated.
PatrickSheena Kaul schrieb:
Hi Patrick,
Can you try to run the Adobe Creative Cloud on root user account?
Enabling and using the "root" user in OS X - Apple Support
Regards,
Sheena
Hessijames schrieb:
What worked:
-Installing updates as another OSX user. (Which is cumbersome and to be honest I am unwilling to create a new profile and redoing the settings of all installed (especially non-Adobe) applications because of an Adobe bug...)
Any help will be greatly appreciated.
Patrick -
Displaying thumbnails in Bridge CS2
Hello, I've organized the photos from my Canon Digital Rebel XT in Adobe Bridge CS2 (Version 1.0.4.6) for years without a problem. I shoot in RAW and those files are approx. 7 MB in size. I recently received a Canon T3i and the files sizes are approx. 3 times as large and I'm having trouble getting Bridge to display a thumbnail. I can't imagine it's a file size issue since I routinely have .psd files that are 70 MB and larger that I have no trouble having Bridge display a thumbnail. The photos from both cameras are CR2. Is there a settings in Bridge I should adjust?
Any other ideas why I can't get the photos from the new camera to display as thumbnails in Bridge?
Thanks for your help :-)Geoffrey,
Geoffrey Hudson wrote:
…The photos from both cameras are CR2…
The fact that they have the same extension is irrelevant. The files are fundamentally different.
The Canon T3i was supported for the first time in ACR 6.4 and later, which only run with CS5.
There is and there will be no version of ACR that will work with Bridge CS2 to open files from the T3i.
Your only option would be to use the free Adobe DNG Converter to convert your raw CS2 files to raw DNGs that you can then open in CS2.
If you have an Intel Machine, you want version 6.6 of the Adobe DNG Converter. If your machine is older than the Intel Macs, e.g. any kind of Power Mac, then you need version 6.4 of the free Adobe DNG Converter, as later versions will not run on non-Intel machines.
Wo Tai Lao Le
我太老了
Maybe you are looking for
-
F4 Process takes a long time to show the values
Hi gurus, We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table. This infoObject is being used in a Query (3.X version) and when we press the
-
How do I disable administrator username and password entry to access ix4-300d
With the recent version 4.1.102.29716 update, I am now FORCED to enter a username and password to get into my "home based" ix4-300d NAS. This has already been a MAJOR pain for my nedia server setup, in that I am no longer able to create a network dr
-
Keynote iOS, Apple VGA adapter and Beamer, hardware or software Issue?
hiho, iPad 2, newest iOS, Keynote, newest version original apple vga adapter Effect: After connecting to a projector I get a projector picture for approx 3-5 seconds. After this time the projector loses the signal from the iPad2. disconnecting and re
-
When a linked .pdf is clicked, it downloads rather than following the link and opening in another safari window.
-
Hello, I recently discovered that any picture/video messages are being sent from my email instead of my direct number. I am not sure if or when I changed this setting but do not know either how to change it back. Whenever I try to search this it come