Unable to update existing V9.7 Fix Pack 9 installation on Windows .

Hi All
Using Administrator id , I am trying to upgrade the fix pack in Development system.I have encounter the following error as per attachment attach , When I continue nothing seems to be updated .It still shows fix pack 1 .
I have manage to upgrade the fix pack 9 on (Training System ) & (Portal Training System) with no issue, never had this error prompt out .
Please advice .
Regards
Clement

Hi Clement
Could you refer the SAP Note for DB2 FP
101809 - DB6: Supported Versions and Fix Pack Levels
BR
SS

Similar Messages

  • I am unable to update, uninstall, or reinstall iTunes on my laptop.  Windows 7 Ultimate 32 bits.  Error code is 2330.  Can somebody please help me?

    I am unable to update, uninstall, or reinstall iTunes on my laptop.  Everything was working fine until recently when there was an update available for iTunes, and when I tried to update this, I got the message, "The installer has encountered an unexpected error installing this package.  This may indicate a problem with this package. Error code is 2330."  Can somebody please help me?
    System configuration:
    Windows 7 Ultimate 32 bits.
    Version:  6.1.7601 Service Pack 1 Build 7601
    System Directory:  C:\Windows\system32
    RAM:  1.00 GB.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • How to fix error during installation of windows 7?

    im trying to install windows 7 pro
    the first steps of boot camp came simple and easy
    partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
    Plz help me fix the problem anybody!!!
    Thank U
    JOT

    im trying to install windows 7 pro
    the first steps of boot camp came simple and easy
    partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
    Plz help me fix the problem anybody!!!
    Thank U
    JOT

  • HT201210 Am getting an error unable to update when trying to install ISO6 on my Ipad

    I was try to update my ipad2 to new ISO6 it download but after download if click on install it writes verifying then its giving me an error unable to update how can I fix the problem .

    Hi:Thanks for your response.The following code works fine in a standard VB.Net windows Application,It is just a send and receive instruction to a power meter over the GPIB bus.This code is behind a Button,and a label displays the result.I have a problem when I try to duplicate this simple code on an ASP.Net page using Server controls.When you click the button the code is supposed to execute on the server side and not the client side(browser).The code fails when it gets to the viOpenDefaultRM line,I get an error message as follows System.DllNotFoundException:Unable to Load Dll(VISA32.DLL).I have added a reference to the visa library from within the project.
    '''''This is the code I am using'''''
    Dim lsnbuf As String = Space(100)
    Dim wq As Long
    Dim drm As Long
    Dim ret As Long
    Dim vi As Long
    Dim tlkbuf As String
    Dim FoundCRLF As String
    Dim CleanString As String
    Dim rcnt As Long
    wq = viOpenDefaultRM(drm) 'Open Vi session
    wq = viOpen(drm, "GPIB0::2::INSTR", VI_NULL, 5000, vi)
    tlkbuf = "*IDN?"
    ret = viWrite(vi, tlkbuf, Len(tlkbuf), rcnt)
    ret = viRead(vi, lsnbuf, 100, rcnt)
    FoundCRLF = InStr(lsnbuf, vbCrLf)
    If FoundCRLF > 0 Then
    CleanString = Mid(lsnbuf, 1, FoundCRLF - 1)
    End If
    Label1.Text = CleanString 'display IDN String

  • HT1430 Unable to update apps on ios6 iPad

    Unable to update existing apps. Unable to download apps.
    Have done the following already
    @ checked that have enough band width to download.
    @ have enough storage space on my iPad.
    @ rebooted the iPad.
    @ ensured that there are no pending items / in process downloads in iTunes.
    @ logged out and re logged in into iStore.
    @ deleted the apps that were not getting updated, only to realize that not only I am not able to update the apps, I cannot download apps either.
    Anybody?

    While updating the apps the message is "Waiting" when I see the icon on home screen and I see " Installing" if I am in App Store.
    Unable to download any app.
    To reboot...I held HOME Key and TURN OFF button till Apple logo appears.
    I have not tried resetting iPad/ restoring or rebooting my router.

  • IPhone 4.0.1 unable to update iTunes/AppStore Billing Information (county)

    +*iPhone 4.0.1 unable to update iTunes/AppStore Billing Information: Prevents Purchasing/Installations*+
    ++When accessing the AppStore I am prompted to update my iTunes billing information. This process generates a loop when selecting the county and will not update. This prevents purchases or free downloads from the AppStore.++
    Details:
    +I have a new iPhone 4. When I received it I activated the phone, restored from back-up and updated the software to 4.0.1. After the software update was complete I tried to install Free and Purchased applications from the App store. I cannot install any free or purchased iTunes application, music, or video.+
    +*I received the following messages:*+
    *[Verification Required]*
    +Before you can make purchase, you must tap Continue to sign in, then verify your payment information.+
    Cancel (Continue)
    *[Sign in Required]*
    +Tap Continue and sign in to view billing information.+
    Cancel (Continue)
    *[iTunes Password]*
    +Apple User [email protected]+
    Password
    Cancel (Ok)
    [Account]
    Cancel (Done)
    +Credit Card:+
    +Card Number:+
    +Security Code:+
    Month:
    Year:
    Salutation:
    +........ More+
    +*I re-entered all information*+
    *[Address Verification]*
    +County information is required to calculate the applicable sales tax on your purchases. Choose the county where your billing address is located.+
    County:
    Cancel (Done)
    I select the county and select done the screen loops for the county information.
    *Things I have tried:*
    - Updated billing information via iTunes on the Mac (Updates successfully) - but will still prompt for updates on the iPhone.
    -Restarted iPhone (same)
    -Erased iPhone and activated as new without restoring from backup (same)
    -Contact iPhone support (no other advice then what happened here the first time) the second attempt at support has resulted in a call with iPhone and iTunes Support.
    I will post back my findings, but has anyone found a solution.

    The only difference I noticed was that the card that kept looping was a visa check card, verse a credit card (mastercard). I am not sure if there is a problem within the iPhone application. I don't believe this to be an iTunes or App store problem because the account profile will accept the card information via a computer. This problem seems to be within the address verification process the iPhone/app store does only on the iPhone platform. Apple support and iTunes support seems to be clueless. My original post is the only way I've gotten it to work.

  • Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

    Hello Folks,
    Can anyone throw some light into what action is required on my scenario.
    I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
    The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
    I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
    It's asking me for a value to enter for seed at command prompt. "Enter the seed":
    what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
    Please Assit
    Steps Details from Release Notes:
    UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
    Component: Server Infrastructure
    Subcomponent: SWSE
    Product Version: Siebel 8.0.0.12
    Base Bug ID: 11938270
    **Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
    **Use the following workaround to address this issue:
    Navigate to the eappweb/bin directory from the command line on the SWSE installation.
    Run the following command:
    seedgeneratorutil myseed.dat abcdef
    NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
    The myseed.dat file is generated in the eappweb/bin directory.
    Edit eapps.cfg to include the following parameters under the SWE section:
    seedfile = < complete path for myseed.dat >
    Bounce the web server.
    (For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
    Thanks
    Kumar

    Wilson,
    Thanks for your reply.I have repeated the steps and regenerated the error messages.
    Browser
    Message:
    An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
    Initialization error:
    Unable to get the seed from binary file.
    Log
    2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
    ProcessPluginState     ProcessPluginStateError     1     000000024e781b9c:0     2011-09-20 23:23:01     7852: [SWSE] Unable to get the seed from binary file.
    Eapps.cfg
    [swe]
    Language = enu
    Log = errors
    LogDirectory = $(SWSERoot)\log
    ClientRootDir = $(SWSERoot)
    SessionMonitor = False
    AllowStats = true
    LogSegmentSize = 0
    LogMaxSegments = 0
    DisableNagle = False
    seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
    Thanks
    Kumar

  • Sync session failed to start on my ipod touch. tried to delete back up history but it only shows my daughters ipod touch and not mine! Im unable to update or purchase new aps, not sure how to fix this problem?

    sync session has failed to start on my ipod touch. Tried to delete the back up but it only shows my daughters ipod touch. Iam unable to update or purchase new aps, not sure how to fix this problem?

    Try:
    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?

    I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?

    You may have triggered some intermittent database issues but it should be running smooth by now. Let us know if you still see server errors.
    Also, if your addons appear to go missing after updating there is a workaround http://blog.mozilla.com/addons/2011/09/28/issue-discovered-with-firefox-add-on-upgrades/ And there is a 7.0.1 fix on its way.

  • Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to reinstall iTunes?, Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to reinstall iTunes?

    Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to do a reinstall?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Sequence for Updates (Service Pack / Fix Pack)

    Hello everybody.
    I'm a bit confused about the update strategy.
    Until now I was convinced that the strategy for the updates is or should be like this:
    Service Pack 1 --> Fix Pack 1.1 --> Fix Pack 1.2 --> ... --> Fix Pack 1.x
    Service Pack 2 --> Fix Pack 2.1 --> Fix Pack 2.2 --> ... --> Fix Pack 2.x
    Service Pack 3 --> Fix Pack 3.1 ...
    and so on, and so on.
    There shouldn't be possible to install, e.g a Fix Pack 2.1 after the Service Pack 3 is installed.
    But because of an problem with the connection server under Windows 2003 I'm not that sure anymore.
    The story in short:
    We've got installed the Service Pack 4 on the Enterprise.
    After a few Windows updates the connection server didn't start anymore.
    In the forum some say that this issue is fixed with the Fix Pack 3.6.
    So first I wondered why the issue occurs on a system with a higher patch.
    But the I've seen in the SAP Service Marketplace that the Fix Pack 3.6 is released after the Service Pack 4. Does this mean it is "more up to date"?
    Is my image of the update sequence incorrect?
    Thanks for any explanation in advance.
    Regards
    PS: My connection service problem was solved by uninstalling the windows update KB2509553 and a restart of the system.

    Hi,
    the explanation of this is the following:
    At some point they start with the development of SP4. Lets say they start the dev. of SP4 during the release SP3 FP3.5. So all fixes after FP3.5 wont get packed into SP4. Thats why FP3.6 will fix a bug which SP4 wont. With the release of FP4.1 this fix from FP3.6 will be packaged aswell into FP4.1
    I hope this made it clear.
    Regards
    -Seb.

  • I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

    I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

    Here is a YouTube video which should guide you through a solution:  http://www.youtube.com/watch?v=VLFAo-FWLxE

  • "unable to update at his time". Any way to fix?

    None of my apps will update.  I continue to get an error message saying "unable to update at his time".  Also will not let me download new aps.  Any way to fix?

    Hello Hella80,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    You may want to review the information under the heading "How to reset."
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT5957 I am unable to update my iPhone 4 how do I fix it

    How do I update my iPhone 4 when I try or always says error occured

    Hello there, Shawna1977.
    The following Knowledge Base article has some pointers on getting past the issue you're having:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Open applications not appearing in dock or command-tab.

    I am using 10.9.5 on a Macbook Air and I've noticed recently that open applications don't display icons in the dock.  Command-Tab also doesn't show the icons of all open applications either.  This seems to be recently occurring.  It's quite frustrati

  • Problen in free goods determination

    hi buddies when i was creating the free goods determination ,i am getting this error"alternative unit of measure EA not defined". i given mat,qty,from,free goods,cl, and all and its asking unit of measure when i try to give EA overther, its saying th

  • ITunes won't stay authorized...

    Not sure when this started but everytime now I open iTunes and try to play a song, watch a movie or listen to an audiobook, I get the "This computer is not authorized" message. I put in my username and password and then I get "You have authorized 3 o

  • Field format _,_,_,~_ error in MIRO

    HI all, i am getting some problem with MIRO screen when i amtrying to create invoice threw MIRO after entering Invoice date then i pressed enter system is giving me message ' Fiels format ,,_ ~_ ' and invoice date getting cleared , this problem i am

  • Caching XSLT results?

    Hi, I am a newbie to XML/XSLT, and we have just written our first XSL stylesheet. I am using the WebLogic JSP Tag Library to do the transformation from XML to HTML and all seems to work well. My question is this: Does WebLogic cache the HTML somewher