Unable to update firmware in my Acrobat X standard

I've purchase my Acrobat X standard from your web site and downloaded it onto my computer. After installing the software, it requested that i update my software. i tried downloading the software but everytime after downloading, a error message came up: ERROR WRITING TO FILE : C:\CONFIG.MSI\PF54.TMP. VERIFY THAT YOU HAVE ACCESS TO THAT DIRECTORY. I've tried the help on your website by un-installing my adobe reader and then update the acrobat X. The same message came up again. please assist.

Hi,
This issue usually occurs when the destination folder does not have the required permissions to copy/run a specific installation file.
Please take a look at the link below and it has step by step troubleshooting instructions to resolve the issue:
http://kb2.adobe.com/cps/408/kb408730.html

Similar Messages

Rebuild screen freeze - unable to update firmware as not docking. Help please

Hello, I've got an 8gb Zen.
Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
Ran scandisk on it - no joy.
Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
Any help appreciated. Thank you

QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

Mnh300 unable to update firmware

I keep getting error unable to update firmware .... when i clickon the update button...
any help ?

Also, don't forget this little ti-bit on post-firmware update from FAQ.
22. Why don't I see any changes on the NMH after upgrading the firmware?
The browser cache needs to be cleared after upgrading the firmware to the NMH. This is essential for new features to appear on the Media Hub's interface. FAQ
Message Edited by thekochs on 01-09-2010 05:35 PM
Message Edited by thekochs on 01-09-2010 05:35 PM

RV082 v1 unable to update firmware

So I have the RV082 router. I had it with a 1.x version of the firmware for a while and I was able to update to the first 2.x version of the firmware a few months ago.
This router is fairly old but works ok. I like to keep it up to date. I recall always looking for firmware updates and not seeing any, then out of no where there are 3 updates to the software. I was able to install the second 2.x version of the firmware. Now I was trying to catch up and install first: 4.1.1.01 and then 4.2.3.03.
I have downlodad both files multiple times and have been unable to update the firmware. It always says secure connection failed.
If it helps I am using ubuntu 14.04 and the lates version of firefox 36.x
I don't know if anyone has had the same issue or if they have any sugestions on how to make this work.
I would rather install alternative firmware but since it is an intel chip inside, not many people are writing firmware for a router like this one. I dropped all of my other linsys/cisco routers (about 6 of them) except this one.
Any help will be greatly appreciated.

> I have downlodad both files multiple times and have been unable to update the firmware. It always says secure connection failed.
I hope this is caused by requirement of HW version by these new firmwares. As you mentioned, you owns device with HW version 1. According download page it is clearly stated ("V3 hardware required"), that all never firmware versions than 2.0.2.01 requires HW version 3 of unit. I am afraid there is no newer firmware version for V1 HW version of RV082 than you already have installed.

Unable to Open Multiple Windows Adobe Acrobat 9 Standard

I have Adobe Acrobat 9 Standard and recently am unable to open multiple documents at one time without an error occurring and Adobe shutting down. I use multiple screens and want one doc open while I review or compare with another doc. It is happening on two machines at my home both running Windows 8.1. Any help is appreciated.

Hi Ankit,
Thank you for your advice, but Im still having problems.
Back to the OP. To avoid the threads getting confused, I suggest the other user starts a new one?
I have tried ensuring that PDFs are automatically opened by Adobe. I used the path you suggested. However, I'm still having the same problem.
When I went to do this, Adobe was listed in the "recommended" list of products with which to open PDF files. However, I ignored this and followed your guidance. Once I had done, nothing happened (i.e. Adobe icon was not added to the 'Other products' list below the 'Recommended').
To me, this speaks of either a bad installation or bad association in which something is causing Adobe not to recognise itself.
What else can you advise?
Is there, for instance, a way to have a clean removal of Adobe, and then reinstall? I don't even know if this will work.

Satellite Pro A200 (PSAE7): unable to update firmware under Vista

Hi,
I tried tp upgrade the firmware of my HD-DVD drive (SD L802B) with the new TO35 firmware, but it is not possible. The upgrade button of that Winvup is not selectable. I had the same problem with an older firmware, but i just thought this was because the firmware was up to date ( notebook is 1 month old).
Winvup displays my drive as "TOSHIBA DVDW/HD SD-L802B TO01 (10/26/07)". The discription of To35 says, it needs a version of TO33 or T034, is that the problem?
I got this firmware update form [Link to firmware|http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes&action=search&teddProduct=737]
so it should be the right one.
So what can i do to upgrade my drive? Currently watching a HD DVD is not possible :(
Thx,
Holger

Its not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page was deigned for the TS-L802A drive.
Don't mix these both drives! It's not the same!
I found this website about SD-L802B Super-Multi DVD Writer
http://www.storage.toshiba.eu/index.php?id=3&pid=221
But according to this page the firmware is not available for this driver ( at this time ?:| )

I am unable to update firmware so as to install na...

Hi I live in Barcelona spain and bought a new 5800XM for christmas. As soon as I saw the new free navagator I tried to install, but it says that it needs latest firmware 31.0.008 or onwards, so I duely try to update my phone, I download the nokia software updater, conect my phone and it then tells me:-
Firmware version
Current 25.0.025
Update 25.0.025
Help, how can this be when I see people have v40... What am I doing wrong, I read someones feed saying I must wait wait and wait for my operator to update... Is this true, does this not com from nokia.... Thanks for any insight.

@Chetan - that would be pointless. First of the hard reset you mentioned is impossible on the 5800, as it is a touch screen phone. Second, even if you hard reset it a zillion times and reinstall software updater the same number of times, if the handset's product number is still not supported (due to either branding or regional issues), he will not get the update.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Unable to update firmware on 5230.

hey, I have a nokia 5230 with the current firmware version V10.0.071.
As far as I know, there are 2 ways to update the firmware on this phone: directly from the phone and through ovi suite. Neither of these ways work for me.
firstly on the phone: as far as im aware, there would be an application called SW update in the applications folder on my phone and I could update through that. On my phone there is no such application. When I search for it in help there is an article about it as well as a link to the application but when I try to use the link it says that the application cannot be accessed.
When I try through ovi suite (I tried version 3.0 and the beta version 3.1) I get a problem as well. I use the softwave update feature and it starts, I choose the software and it backs up my phone and downloads the software. Then when it starts installing, it says 15min remaining, and all of a sudden my phone turns off and doesn't turn back on. Then the installation on ovi suite gets interrupted with a "device recovery" error and tells me that "nokia ovi suite lost connection to your device" and gives me some steps to follow. (remove cable, restart device return cable) then click OK to continue but the same thing happens again. I have tried turning of my comp and removing the phone battery as well as restoring factory settings.
The main reason I wanted to update my firmware is because most songs in my playlist don't play but the player just skips them (it gives the info about song length)m there are also exclamation marks next to the song icons (the songs worked before).
This problem seems to have been reset with the factory reset tho however no luck with software.
Sorry for a lot of text.. And if anyone has any ideas please let me know!

The songs with the exclamation marks are corrupted files. You need a new card or something, or at least format the thing. If you would look at your song folder in a PC, you would see that the files of the songs with exclamation marks are missing.
Also, since your memory card is faulty, you should update the device with a formatted card, or the card removed.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

E52 unable to update firmware - connection lost

When I use the E52 Device Manager control panel to check for new software updates it informs me that a new version of the firmware is available "v.022.009", I select "Accept" to download the update and the display stays on the "Downloading" screen without indicating any progress and then eventually says "Connection lost during download".
I'm using a WiFi connection to the internet.
Any ideas as to why the update will not download?

Are you using Nokia PCSuite with Software updater? Connect with a compatible USB cable. That's the best secure way to perform an update.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Unable to update firmware on HP 8600 Officejet Pro Premium

I just discovered today that there is a newer version of the firmware CLP1CN1322CR, which was released
7/18/2014.
I already have an earlier version of that same firmware installed. It was released last year (date unknown), and I installed it on 9/19/2014. Doing so added, among other things, the Wireless Direct feature.
1. I attempted today to install the version released 7/18/2014. It failed, with the dialogue box Status showing "Up to date."
2. Is there any additional benefit to upgrading this firmware on this printer? If so, what are they and how can I perform the upgrade, considering that the firmware has the same ID but a later release date? Would I need to downgrade the firmware with the original version that came with the printer (CLP1CN1150CR), then perform the upgrade? (I looked everywhere for the original version, but could not find it.)
Additional info:
OS: Windows 7 64-bit.
Connection: Wireless Direct
All printer functions work flawlessly.
Printer plugged directly in to the wall.
Thanks.
This question was solved.
View Solution.

Yes that is correct. So the version you have is the newest. There is another code you may see posted on the forums, but although it appears to be a newer version it is not, it is simply the same version that was obtained through the Web Service menu rather than the HP Website.
Is there anything else I can help with?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Linksys srw2048 unable to update firmware via xmodem (using hyperterm)

I have three srw2048 series switches at my new job. One updated fine via the web interface the other two (after I found a windows machine to use the web interface) looked as though they were uploading the new file but after a reboot I was still on the old verison. So I broke out the console cable. What I have done is to Download Software to the switch (option 1) this kicks me over into xmodem. Once I am in xmodem I choose to send a file (the latest rom) using the 1K Xmodem protocol it immediately gives me retries and errors until it reaches a threshold that ends the session. During this whole process zero k is transferred.
Boot Version 1.0.0.04
Software Version 1.0.0.49
Hardware Version 00.03.10
The only thing I can think is that I must need older files to upgrade to an intermediary version before loading the latest 1.22 rom file.

You might want to pose this question in the Linksys forums at http://homecommunity.cisco.com/
Also, try another terminal program like Teraterm Pro. Maybe it needs "classic" xmodem?

Adobe Acrobat X Standard via Softwareverteilung Updaten Probleme

Hallo Liebes Community-Team,
da hier jede Menge Experten sitzen glaub ich das mein Problem für euch ein Klacks ist :-)
wir haben folgendes Problem bzw. ist uns folgendes unklar: Wir verteilen absofort den kostenfreien Adobe Acrobat Reader über die Windows Softwareverteilung. Klappt auch soweit sogut. Allerdings
bekommen wir Schwierigkeiten beim Verteilen von Updates bezüglich Adobe Acrobat X Standard. Generell ist nun meine Frage, können für die kostenpflichtige Version
Adobe Acrobat X Standard ebenfalls Updates bzw. Sicherheitsupdates verteilt werden und wenn ja, was müssen wir alles beachten? Wir haben es zwar schon einmal
versucht, allerdings erfordert dann das Update die Eingabe eines Lizenzschlüssels, was ich mir aber bei einem ganz normalen Sicherheitsupdate nicht vorstellen kann das dieser benötigt wird.
Danke für eure Antworten schonmal im Voraus!
MFG FE-IT

http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent?view=discussions
Scheint aber eh ein generelles Problem mit Acrobat X zu sein, nicht nur nach Updates via Deployment.
Mylenium

Unable to update or restore Ipod due to firmware not found?

Can anyone help me? I've had my Video Ipod for about a year and a half and have never had trouble with it until now. I can't update it to the lastest software as a message comes up Unable to update software due to firmware not being found. I tried to resort to restoring it to the original factory settings but I ran into a message that said Unable to restore ipod due to firmware not found. Has anyone else had this problem? Help!!!

For step-by-step instructions, go here:
http://docs.info.apple.com/article.html?artnum=304309

Unable to update or repair acrobat x pro. error code 1401

Unable to update or repair acrobat x pro. Error code 1401 and I am the admin on this PC.

Hi wasanga305 ,
Thank you for posting on the forums, kindly try the steps listed in the article Error 1402 | Error 1406 | Acrobat, Reader
Thanks,
Vikrantt Singh

HT1414 i am getting an error message saying unable to update as the firmware file is not compataible .Any solution to this problem

when i try to update iphone 4 i am getting message saying unable to update the firmware file was not compataible .
Any solution to this problem

If the problem is sending to just one address and it has worked in the past, I don't know if this will work. I posted this to another thread yesterday for someone who had the same problem you are having and it worked for them. You can take a look. This is thread that I found and the words below are the OP's suggested fix.
https://discussions.apple.com/thread/3048200?start=0&tstart=0
On the iphone i went Settings>Mail, contacts calanders>choose relevant account (if you have more than 1)> accountname>accountname> scroll down to 'Outgoing Mail server' and click on SMTP >click on your Primary Server >
My #Username and Password were showing 'Optional'. Filled them in with the correct details (email account login) and that fixed problem.

Unable to update firmware in my Acrobat X standard

Similar Messages

Maybe you are looking for