Unable to update iPad 2 software and it's still in recovery mode.

I have been noting some weird behavior on my iPad 2 I so tried to update my iPad to to iOS 6.
Before doing it I tried to sync my apps to iTunes so I would not lose anything. I was unable to sync and a got a message that said "Unable to sync because the sync process faied to start". So to fix that I tried to download and install the iOS 6 update and the update fails due to a "corrupted download file please try again" message. Then I updated iTunes to the latest version and tried all the previous steps again producing the same results. In the process of doing this I somehow I got the iPad into recovery mode and I can't recover to orginal settings because install fails with the "corrupted download file pleas try again" message.
So, hear I sit with a disabled iPad and now apparent way of fixing it.
I am out of ideas on what to try next. Any suggestions what to do?
Also note I did this with my MacBool which is hard wired to  my network. No wifi connection was involved.

Are you getting an error of some kind when attemptign a restore? was the restore sucessful (broadcasted a message from itunes that it was complete)?

Similar Messages

  • Blue Screen and Not working still in recovery mode after ios 8.1.3 update?

    I have an iPhone 5s ,I was update I os 8.1.3 when reboot and still in recovery mode ,Then i was connect to iTunes restore when iTunes show error "27"
    it show this message "The iPhone "iPhone" could not be updated.An unknown error occurred (27)"
    please help me...please
    <Personal Information Removed by Host>

    Hello kopyk001,
    I'm sorry to hear you are having issues with your iPhone. If you are having issues restoring your iPhone from iTunes and are getting an error message, you may find the information and troubleshooting steps outlined in the following articles helpful:
    Resolve iOS update and restore errors in iTunes - Apple Support
    Resolve iOS update and restore errors - Apple Support
    Sincerely,
    - Brenden

  • HT4097 I updated my iPad 2 and it just when Into recovery mode. I tried to get it out but it doesn't  work and it also won't restore, it keeps timing out

    I need some help
    -Monday, February 4, 2013 3:00PM

    I cannot restore the I pad 2,
    My Ipad 2 is stuck in recovery mode after the update 6.1

  • Installed iOS7 from my iPad 2 and now it is in recovery mode...

    So, two days ago, a message popped up on my iPad 2 saying that there is a new system update (iOS7) out, and I should update...I selected continue...downloaded it and then the iPad started installing it...after the installation completed, it turned off. I pushed the power button and the apple logo appeared and then it showed that cable to itunes logo. I plugged in to my computer, opened itunes (latest version) and it sais that my ipad is in recovery mode and that i should restore it. But the thing is that I have some files in my ipad such as pictures that I don't want to lose...
    What can I do? Please help...
    Thanks in advance,
    bbtoska

    Sorry... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >   http://support.apple.com/kb/ht4097
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • New 5th generation ipod wont install software and is now stuck in recovery mode

    I just received a 32 GB iPod touch 5th generation for Christmas today. I installed the newest version of itunes, backed up my former iPod to the computer and then plugged in the new one to add the software and restore it from the back up. After  the 3 hours of installing the software was almost done it said an unknown error ocurred. Now my new iPod is stuck in recovery mode and won't get past restoring the iPod. I have tried to go through it several times now. I really want to get this working, but I don't know what to do anymore.

    The problem is that it stops restoring. I go throught the recovery stage to restore it and not even a quarter of the way through it comes up with the message that an unknown error has occured. Every time i connect it to iTunes it tells me that it has detected an iPod in recovery mode.

  • Ever since i updated my iphone and it ended up in recovery mode, my itunes wont detect any of my devices.. When i plug it in the computer instead of making that two toned noise it makes a weird one toned noise twice as if there's something wrong..

    A while back when i was updating my iphone 5 itunes said an error had occured and my iphone ended up in recovery mode.. i brought it to the apple store they fixed it and i lost everything. supposedly the only things that were backed up on my icloud were 22 contacts from my previous iphone.. But i was still greatful i left with a working phone, however when i went home and plugged it in the computer itunes detected that i had a new phone and asked me if i'd like to back up my phone, surely i clicked yes and in a few minutes EVERYTHING came back! now a day later im here trying to connect my ipod and iphone to itunes and it will not detect anything. I uninstalled and reinstalled it back... still itunes is not responding im going on a road trip!! i need new music on my devices!! Someone help pleaasseee!!

    hey mill1640,
    Did you ever get your iPhone to register with iTunes? I just upgraded as well to Snow Leopard, and my my isn't recognized at all also.
    If you did get this resolved, I would appreciate a little suggestion in the right direction.
    Many thanks,
    Josh

  • My trackpad mouse is not moving with my touch. The cursor seems to have a mind of it's own. I've updated my software and it's still happening. What do I do?

    The mouse on my trackpad is not responding to my touch. The cursor is very jumpy and sometimes doesn't allow move it at all. It seems as if my cursor has a mind of it's own...what should I do?

    Sometimes this is caused by  a swollen battery.
    Genius reservation http://www.apple.com/retail/geniusbar/
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/TS1449

  • I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why?

    I have an 1st generation ipad. I am unable to update the software beyond 5.1.1. Why? It tells me my software is up to date.

    Very possible.
    You can often get the older version if you buy directly on the iPad
    Go through the iTunes Store on your old iPad and purchase netflix, if you can get an older version of the app, iTunes will ask and prompt the download of older version.
    Not all apps will be available.
    I was able to put iBooks on my older iPod this way.

  • HT201210 Unable to update ios6 software. It says Ido not have enough gb, but I bought more and it did not help..

    Unable to update ios6 software. It says Ido not have enough gb, but I bought more and it did not help..

    How do you buy more GB?
    Are you updating via connecting your iPad to iTunes?

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • HT1338 I'm unable to update any software on my macbook air and iMac

    I'm unable to update any software on my macbook air and iMac getting the following error "to update your software you need to sign in with the account you used to purchase it" any help is appreciated

    Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
    1. Follow the instructions in the Apple Support article linked below:
    Mac App Store: Cannot update App Store purchases or updates do not seem available
    2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
    3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
    4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
    5. Triple-click the line below to select it:
    /Library/Caches/com.apple.appstore/adoption.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
    Then repeat step 4.
    6. Select
    Store ▹ View My Account
    from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
    7. Launch iTunes and select
    Store ▹ Authorize This Computer
    from the menu bar.
    8. If you've moved any App Store apps out of the applications folder, or into a subfolder, put them back. Never move or copy those applications.
    9. Contact Account and Billing Support on this page:
    Apple - Mac App Store - Contact Support

  • Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    you seem to be referring to an ongoing issue
    click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
    CCC

  • I have atempted to update my ipad 1 with latest update but after extracting software it goes to restoring ipad software and stops at around 25% on the bar. have tried several times but it does the same I have one useless ipad at the moment ! any ideas ?

    I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?

    when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?

  • I was updating my ipad software and it appears to be frozen?

    I was updating my ipad software and it appears to be frozen?

    If you think that update completed and the iPad froze afterward, try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If you see evidence on the screen indicating that the download and install is stuck, like the white progress bar has no moved for quite some time, you will probably need to restore using recovery mode.
    You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • I updated new software and now Ipad is disabled. How do I fix ?

    I updated new software and now Ipad is disabled. How do I fix ?

    Connect the iPad to your computer's iTunes (you will need an up-to-date version of iTunes installed on your computer) and you should be able to reset your iPad : http://support.apple.com/kb/HT1212 - you can then restore/resync your content to it

Maybe you are looking for

  • Server Error in '/drm-web-client' Application?

    Hi, I received the following error when I tried to login to the DRM web client 11.1.2.1 : Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system c

  • How to add name from text file to jtable?

    hello all, how to add name (string) from the notepad file(.txt) into jTable rows. I am not able to add it. try {              FileInputStream fis = new FileInputStream("Devices/Devices_Lst.txt");              BufferedReader br = new BufferedReader(ne

  • 10.2.0.3 DBUA Error

    I downloaded pat 5337014 in order to upgrade my 10.2.0.2 databases to 10.2.0.3 1. Originally installed Oracle 10.2.0.1 on RHEL 4 32-Bit without a database 2. Applied the 10.2.0.2 patch then created a DB 3. Successfully installed the 10.2.0.3 patch 4.

  • Titel with transparent background - how to do? PE-10

    Hi, When I make a title it shows clearly transparent over my video-picture - as desired - in the preview window. When I share this video the title has  black background and so the background video-picture is not visible. What am I possibly doing wron

  • IPhoto with mavericks

    I just updated my mac with mavericks and now iPhoto must update but it keeps not responding. It get's about half way through update but won't go to completely. I've tried restarting and making sure all other updates are up to date but nothing seems t