Unable to update iTunes:  Related to Bonjour error "WSARecvMsg error 87"

I am running iTunes 9.2.0.61 on Windows 7 Ultimate x64. For some time, I have been unable to update iTunes to the latest version beyond what I have, regardless of what the latest version is.
Using Apple Software Update, I get the following error during the update:
"Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
Accompanying this error in the Application log in Event Viewer are a few errors:
Event ID: Source: Occurrences:
100 Bonjour Service 7
11920 MsiInstaller 1
Event ID 100 from Bonjour Service has the following message:
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:05.000000000Z" />
<EventRecordID>16990</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data>WSARecvMsg failed (87)
</Data>
</EventData>
</Event>
Here is the error for event 11920 from MsiInstaller:
Log Name: Application
Source: MsiInstaller
Date: 10/31/2010 8:51:06 AM
Event ID: 11920
Task Category: None
Level: Error
Keywords: Classic
User: WILL7\swsander
Computer: WILL7
Description:
Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">11920</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:06.000000000Z" />
<EventRecordID>16991</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
</System>
<EventData>
<Data>Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B34314246304445342D354241452D344238382D414644332D383641333042323232313 8367D</Binary>
</EventData>
</Event>
I checked my Services console and Bonjour was started. I can also stop and start it without issue. I searched for these errors, but most of what I found was trouble getting the Bonjour service to start and as you can see, this is not my issue.
I have also tried to update iTunes with Bonjour stopped and disabled and with my Eset NOD32 Antivirus software disabled, but neither of these steps made any difference. I do not have a third-party firewall on my PC, but I am using Windows firewall. I have also tried disabling the Windows firewall, but this made no difference.
Any help would be appreciated.

More information:
Found this in the System log in Windows Event Viewer. There are many occurrences coinciding with the times I have been trying to update iTunes and/or Bonjour.
Log Name: System
Source: Service Control Manager
Date: 10/31/2010 9:44:14 AM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The Bonjour Service service terminated with service-specific error The parameter is incorrect..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T13:44:14.338716200Z" />
<EventRecordID>94955</EventRecordID>
<Correlation />
<Execution ProcessID="876" ThreadID="4212" />
<Channel>System</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Bonjour Service</Data>
<Data Name="param2">%%87</Data>
</EventData>
</Event>
Message was edited by: scottws

Similar Messages

  • HT201210 Unable to update iTunes 10.6.3 - continually getting error message.

    Has anyone been able to successfully update the iTunes 10.6.3?  I keep getting the same error message each time i try:  "Errors occurred while installing the updates.  If the problem persists, choose Tools> ..." which I've done repeatedly with no luck...

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    Does that go through any better for you?

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to reinstall iTunes?, Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to reinstall iTunes?

    Unable to update iTunes or iPhone. Bonjour.msi was deleted by accident. How do I fix this without having to do a reinstall?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Unable to update iTunes - missing iTunes64.msi

    Unable to update iTunes - each time I get error message: "The feature you are trying to use is on a network resource that is unavailable." It cannot find the installation package "iTunes64.msi". Have tried various methods found on Apple Support to no avail. I think it might be something to do with uninstalling old versions of itunes - I can't seem to do this either, even using the Microsoft Fix it programme. I do not use a network. I use an external HD to save music files but with this plugged in the problem persists. Any help would be much appreciated! It's driving me mad!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    tt2

  • I have been unable to update iTunes on my Windows PC.

    I have been unable to update iTunes on my Windows PC. An error message keeps coming up saying a .dll is missing. My daughter has experienced the same issue with her PC. No problems with my iMac or iOS devices. I thought I may have some corrupted files, so I deleted iTunes and attempted to download it. The same error message came up, and now I don't have iTunes on my PC.  Has anyone experienced a problem with an update of iTunes on a Windows based PC?

    An error message keeps coming up saying a .dll is missing.
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Unable to update Itunes,Itunes 64.MSI problems

    Iam unable to update Itunes, I get a message that I need to install I tunes 64.msi how can do that

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    tt2

  • After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

    After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
    Any ideas on the subject would be most helpful
    Thanks in advance
    Dingoh

    The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
    So, are you on version 9.2.1?
    Was it Tiger or Leopard you had on the drive before?
    iTunes 9.2.1 download...
    http://support.apple.com/kb/DL1056

  • HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

    I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.  I keep getting the error message to reinstall to fix the problem.

    See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

  • HT201210 Unable to update iTunes or Quick Time.  Message:  invalid signature

    I am unable to update iTunes because I receive the message "iTunes has an invalid signature and will not be installed."

    "+unable to delete older version of quick time" "The feature you are trying to use is on a network resource that is unavailable" "enter an alternate path to a folder containing the installation package 'Quick Time.msi'".
    With those symptoms, download and install the Windows Installer CleanUp utility from Microsoft:
    http://support.microsoft.com/kb/290301
    Now run the utility ("Start > All Programs > Windows Install CleanUp"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time?
    THIS WORKED FOR MY SYSTEM. I have now reloaded both iTunes and Quick Time. THANKS

  • Unable to update itunes 11.1. Running windows 7, tried the download only but then say's invalid signature

    Unable to update itunes 11.1. Tried the download only nut say's invalid signature.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Unable to update iTunes (since May 2012)

    I have been unable to update itunes on my PC for a couple of months now.  It tells me that it can't access a folder/file that doesn't exist.  Anyone else have this issue?  And, Anyone know how to fix it?

    It tells me that it can't access a folder/file that doesn't exist.
    What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

  • Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'

    Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
    Please help...need to get newest update so I can activate my new IPhone4. Thanks

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I am unable to update itunes to 10.2, I have windows xp

    I am unable to update itunes to 10.2, I have windows xp, Can anyone help?

    Did you follow these steps?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • IPhone 4.0.1 unable to update iTunes/AppStore Billing Information (county)

    +*iPhone 4.0.1 unable to update iTunes/AppStore Billing Information: Prevents Purchasing/Installations*+
    ++When accessing the AppStore I am prompted to update my iTunes billing information. This process generates a loop when selecting the county and will not update. This prevents purchases or free downloads from the AppStore.++
    Details:
    +I have a new iPhone 4. When I received it I activated the phone, restored from back-up and updated the software to 4.0.1. After the software update was complete I tried to install Free and Purchased applications from the App store. I cannot install any free or purchased iTunes application, music, or video.+
    +*I received the following messages:*+
    *[Verification Required]*
    +Before you can make purchase, you must tap Continue to sign in, then verify your payment information.+
    Cancel (Continue)
    *[Sign in Required]*
    +Tap Continue and sign in to view billing information.+
    Cancel (Continue)
    *[iTunes Password]*
    +Apple User [email protected]+
    Password
    Cancel (Ok)
    [Account]
    Cancel (Done)
    +Credit Card:+
    +Card Number:+
    +Security Code:+
    Month:
    Year:
    Salutation:
    +........ More+
    +*I re-entered all information*+
    *[Address Verification]*
    +County information is required to calculate the applicable sales tax on your purchases. Choose the county where your billing address is located.+
    County:
    Cancel (Done)
    I select the county and select done the screen loops for the county information.
    *Things I have tried:*
    - Updated billing information via iTunes on the Mac (Updates successfully) - but will still prompt for updates on the iPhone.
    -Restarted iPhone (same)
    -Erased iPhone and activated as new without restoring from backup (same)
    -Contact iPhone support (no other advice then what happened here the first time) the second attempt at support has resulted in a call with iPhone and iTunes Support.
    I will post back my findings, but has anyone found a solution.

    The only difference I noticed was that the card that kept looping was a visa check card, verse a credit card (mastercard). I am not sure if there is a problem within the iPhone application. I don't believe this to be an iTunes or App store problem because the account profile will accept the card information via a computer. This problem seems to be within the address verification process the iPhone/app store does only on the iPhone platform. Apple support and iTunes support seems to be clueless. My original post is the only way I've gotten it to work.

Maybe you are looking for

  • Calculating acquisition cost

    How can the landed cost be calculated for something that is bought but the actual cost inclusive of freight and duty unknown at the time of entering the req? Only freight costs are known at receipt. Customs duties are known with the AP invoice and no

  • I can get iphoto to work for any apple device

    I cant import any photos or videos without iphoto crashing. I have an Ipad2 and iphone4 with a brand new imac running Lion. Process:     iPhoto [18206] Path:        /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:  com.apple.iPhoto Version:

  • IPod 5 on ios 7 keeps asking What is your father's name over and over again.

    This is my cousins iPod and I have pictures of it... Very strange he disabled Siri on his iPod but this is very scary.

  • FieldPointOPC2.exe Driver & Communication Loss

    Background/Environment: Currently I have a legacy hardware system utilizing older FieldPoint FP-1600 ethernet modules with a couple of Discrete Input & Output modules.  I run a custom desktop Visual C++ application which connects to the FieldPoint ar

  • Creating a dynamic table that spans multiple pages

    Hi guys, I have a script that is able to add rows to a dynamic table. The issue I am having now is I want this dynamic table to span multiple pages. I'm not exactly sure how to do this. It looks like to me that the table stops once it reaches the hei