Unable to update Prelude CC. Get Error ' Close the following application - log transport'
This is happening when I'm using the CC admin program to install the update. The download of the update begins, and once the install starts, I get an error that says:
Close the following application 'log transport (logtransport2.exe)'- I can either close or retry.
How do I close this application - logtransport2.exe?
Hi Bhorv67,
Please refer the following forum thread on same problem "Close the following application 'log transport (logtransport2.exe)''
http://forums.adobe.com/message/5832570#5832570
Hope this helps.
Regards,
Sumit Singh
Similar Messages
-
Updating InDesign "Please close the following applications to continue"
Hi! I’m trying to update InDesign through my Creative Cloud connection, but I get the following error message:
InDesign CC Update
Please close the following applications to continue:
- InDesign (Adobe InDesign CC)
Below this message are the buttons “Cancel” and “Retry”. Even though my copy of InDesign is not running, I still get this message when I click on the Retry button, and it continues to appear each time I select Retry. Clicking on Cancel has the same result: the error message will continue to appear!
Is there anything I can do to remove this message and update InDesign? On my CC Updater window, all my applications are show as being up to date, except for InDesign, which is show as “canceling”.
Thanks in advance,
Colin HartridgeClosing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/ -
I am trying to install Acrobat XI Pro. On my Mac, I get the message, "Please close the following applications to continue: - Safari. Safari is closed, but I can't get past this screen. Each time I click "Retry", the message reappears.
TErminate the processes in activity monitor an/ or configure Safari tomnot use the quick launcher and automatic update check so that those processes aren't used to begin with.
Mylenium -
How do I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto"
Just popped up...grrtried that too. I rebooted and it was gone, mmh, but anyway glad it's gone
-
I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?
Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion -
i am downloading a software update, but at the last moment before it finishes, it says in order to continue, please close the following application: safari, and the application is closed, what do they mean, and what should i do?
You should close safari.
-
I am trying to finish the installation of Reader from Adobe Creative Suite 5.5 Design Premium and it will not let me proceed because it says "Please close the following applications to continue. Google Chrome.exe" , I don't have any Chrome applications open and I have even gone to Add/Remove Programs and removed Chrome from my PC. Still get error. Any advice?
ctrl-alt-del > start task manager > processes
-
I just downloaded the CC Premiere suite. When I update P-PRO and AF I get the following no apps are open -Please close the following application Logtransport application (Logtransport2exe)
Intel® Xeon® 6-Core 12-Threads CPU 4.0 GHz Turbo
- Workstation Main Board
- 64 GB ECC DDR3 1600 2x Quad Channel Kit (8x 8GB)
- nVidia Quadro K4000 3GB DDR5 Professional Graphics Card
- 500 GB Solid State Drive (SSD) for OS & Applications
- 1TB 7200 RPM 64MB Cache SATA 6.0GB/s Enterprise Level Drive
- 2x DVD Burner 24X Speed SATA DVD-R, DVD+R, DVD-RW
- Microsoft Windows 7 Professional 64-Bit Edition
Specifications:
Intel® Xeon® Processor E5 v2
Liquid Cooling on CPU
Intel X79 Chipset Workstation Main Board
Quad Channel DDR3-1600 RAM up to 64GB
Supports up to 4-way CrossFire or SLI GPU Configurations
Supports SATA Raid 0, 1, 5, 10
8-Channel Audio Onboard
(4) Serial ATA 3GB/s Ports
(6) Serial ATA 6GB/s Ports
(2) Intel Gigabit Ethernet LAN (10/100/1000 Mbps)
(4) PCI-Express x16 Slots
(2) PCI-Express x8 Slots
(10) USB 2.0 Ports - Back Panel
(2) USB 3.0 Ports - Back Panel
(2) eSATA 6Gb/s Ports - Back Panel
(8) Audio Ports for HD Surround Channels - Back Panel
Message was edited by: Kevin MonahanHi nattate,
Please go to task manager>processes and end the task which says Logtransport2exe. After closing the task try to update again.
Regards,
Vinay -
Please close the following applications to continue...
Man this has been frustrating! I have researched and researched!
i get this message when trying to install
Please close the following applications to continue: - Adobe Premiere P
I am on an iMac, 10.9.2 3.2 Ghz Intel Core i3 8GB 1333 MHz DDR3 running Mavericks...which I hate by the way.
I have checked the Force Quit and Adobe Premiere P is not listed. I have checked the Activity Monitor and it is not listed. I have re launced Premiere and closed it. I have relaunched Creative Cloud.
Where is coming from!!!!!Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/ -
Adobe Photoshop CC "Please Close The Following Application "
I seem too be having a problem installing Adobe Photoshop CC , everything was working great in the beginning , but as soon as I began installing it I had a message display saying "Please Close The Following Application " Which in this case is Adobe Illustrator. I already have it closed , even in task manager , I can't see the Illustrator.exe. Is there a work around this?
Often something will be held in memory and mess things up. For a long time Sonic DVD recorder would leave something going on with my work computer to the point that it would not fully log me off. Can't tell you how many security violations I got before I learned to completely shut down the computer each day.
-
Please close the following applications to continue: (SafariDavClient)
Installing Adobe Acrobat XI Pro 43% Complete Stops?
Please close the following applications to continue: (SafariDavClient) Mac OS 10.9https://www.google.com/#q=SafariDavClient may help
-
Getting error like "The following tags were not closed ..."
Hi,
I am getting an error like "The following tags were not closed <Main Report Name>. Error processing resource 'http://abc.cdf.bnm/OA_CGI/FNDWRR.e..."
Issue is , TAG is breaking with main report name.
Any suggestions would be appreciated.
Edited by: user12086550 on May 10, 2010 5:33 AMI'm having the same problem, but how did you resolved it??
my sub query is running good in toad. this is my xml
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="Asset_Loc_Change" description="Change_in_Asset_Location_and_Account" version="1.0">
<properties>
<property name="xml_tag_class" value="upper"/>
<property name="include_parameters" value="true"/>
</properties>
<parameters>
<parameter name="P_START_DATE" dataType="varchar2"></parameter>
<parameter name="P_END_DATE" dataType="varchar2"></parameter>
<parameter name="P_BOOK_NAME" dataType="varchar2"></parameter>
</parameters>
<lexicals>
</lexicals>
<dataQuery>
<sqlStatement name="LOC_DETAIL">
<![CDATA[
select
ASSET_NUMBER,DESCRIPTION,ASSET_CATEGORY,trunc(MAX(DATE_CHANGED)) DATE_CHANGED,
MAX(OLD_ACCOUNT) OLD_ACCOUNT,Max(NEW_ACCOUNT) NEW_ACCOUNT,Max(OLD_LOCATION) OLD_LOCATION,Max(NEW_LOCATION) NEW_LOCATION
from(
select distinct
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE ASSET_CATEGORY,
fad.description DESCRIPTION,
max(fdh.DATE_EFFECTIVE) DATE_CHANGED,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8) OLD_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL) NEW_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1) OLD_LOCATION,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL) NEW_LOCATION
from
fa_distribution_history fdh,
fa_locations fal,
FA_CATEGORIES CAT,
fa_additions fad,
gl_code_combinations gcc,
fa_books fb
where
1=1
and fdh.DATE_EFFECTIVE between to_char(trunc(:P_START_DATE)) and to_char(trunc(:P_END_DATE))
and fal.location_id = fdh.location_id
and fad.asset_id = fdh.asset_id
and fdh.code_combination_id = gcc.code_combination_id
and fb.book_type_code = fdh.book_type_code
and fb.book_type_code = to_char(:P_BOOK_NAME)
and fb.asset_id = fdh.asset_id
Group by
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE,
fad.description
,NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL)
GROUP BY
ASSET_NUMBER,ASSET_CATEGORY,DESCRIPTION;
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_ASSET_LOC" source="LOC_DETAIL">
<element name="ASSET_NUMBER" value="ASSET_NUMBER"/>
<element name="DESCRIPTION" value="DESCRIPTION"/>
<element name="ASSET_CATEGORY" value="ASSET_CATEGORY"/>
<element name="DATE_CHANGED" value="DATE_CHANGED"/>
<element name="OLD_ACCOUNT" value="OLD_ACCOUNT"/>
<element name="NEW_ACCOUNT" value="NEW_ACCOUNT"/>
<element name="OLD_LOCATION" value="OLD_LOCATION"/>
<element name="NEW_LOCATION" value="NEW_LOCATION"/>
</group>
</dataStructure>
</dataTemplate> -
I have a posting on my screen that says close the followinfg application, but I do not know how
1) If iTunes appears open in the dock, click it and try a traditional quit (Command + Q)
2) iTunes may be unresponsive, in that case > Mac OS X: How to quit an unresponsive application using Force Quit
3) Open up Activity Monitor, under "CPU" find the process "iTunes" and force it to quit from there. -
Getting error '"close the cd/dvd guide"
I have an Epson Stylus Photo R300 printer. I get error message "close the cd/dvd guide" when trying to print on a cd. I downloaded the new driver for snow leopard and I still cannot print on a cd. Please help!
You will need to remove and reinstall your drivers. Here are instructions for the procedure.
1. Power off the printer
2. Uninstall Gutenprint by clicking on the link below.
http://sourceforge.net/projects/gimp-print/files/Uninstaller%20-%20Mac%20OS%20X% 20ONLY/1.2.6/gutenprint-uninstaller-1.2.6.dmg/download
3. Click on the file it downloads and uninstall Gutenprint.
4. Open System Preferences and Print/Fax
5. Highlight the R300 driver and click on remove ('" - ") sign.
6. Delete the Epson Folder from the following location
Mac's Hard Drive\Library\Printers\Epson
7. Delete the following files.
Mac's Hard Drive\User\Library\Preferences\ com.apple.printer ....plist (remove all of the print.plist you find.)
8. Restart your Mac.
9. Download the following R300 files from link below:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 30501&prodoid=37472319&infoType=Downloads&platform=Macintosh
1st epson11523.sea.
2nd epson13044.dmg
10. Install the downloaded files
11. Open PrintCD
12. Click on File
13. Click on Update Printer information
14. Create a CD
15. Click on File print
Make sure the R300 is selected under the Printer selection and CD/DVD is available under the Media selection.
This should take care of the problem.
Hope this helps,
Syd -
Has anyone come across this before, my PC is running Windows 8.1
Just to say that I've just sorted out this problem and have completed the download and installed it.
When the warning comes up telling you to close the PhotoshopElementsEditor.exe (Photoshop Elements 12 Editor) go to task manager and in Apps you will see Photoshop Elements 12 Editor . Close it down and the download Application completes its sequence. Sorry if I'm not very good at explaing but it seems to have worked.
Best wishes
Mike
Maybe you are looking for
-
How do I move my PC iTunes collection to my Mac with Drobo FS?
My iTunes collection is big--2,000 GB (2 TB). It grew up on my first-generation Drobo, attached to my Windows laptop. I recently purchased a Mac, and a Drobo FS. The DroboApp Firefly was my planned method of execution, until I discovered that iTun
-
I have been having issues with my ipod not being recognized by iTunes or any PC. I spent hours going over support topics trying different and all things I could find. I did just get a new USB cord for it. Now the PC will show that it is a malfunction
-
How to use FM CRM_ORDER_READ using only object_id(sales doc)
Hello Experts, I need to get the details for a given sales document in CRM(crmd_orderadm_h-object_id). I want to use FM CRM_ORDER_READ to get the details of a sales doc but my problem is where to put the object_id value. ANy simple example would be h
-
Connecting ATG 10.1.2 with endeca 3.1.1 without CRS..
Hi Guys, I'm trying to connect ATG 10.1.2 with endeca 3.1.1 without CRS Application. I'm able to connect to endeca app by using the OOTB configuration component. My real problem is "AssemblerPipelineServlet" is getting the ContentItem from the endeca
-
Is it possible to make a search help with dynamic selection table?
Hi Experts, Is it possible to create search helps with dynamic seletion tables means i dont know the selection table names at the time of creation of search help. These tables will be determined at runtime. if yes, Please give an idea how to create a