Unable to update public free/busy data. Operation Failed

After installing/configuring the Oracle Connector for Outlook
on Outlook XP and after entering a new appointment and closing Outlook I receive the following error, twice:
"Unable to update public free/busy data. Operation Failed"
Microsoft's website has references to this problem on Outlook 2000, but I am running OfficeXP. MS also references this problem amoung many Exchange server implementations, however this is the Oracle Connector to the Oracle Calendar Server.
Details of System:
Win XP SP2 - Fully Patched
Office XP SP3 - Fully Patched
Oracle Connector for Outlook - (R.9.0.4.2.60310)
1. Any idea how to fix this?
2. Is there an Oracle Connector greater than the version I list above?

Found my own fix!
I was running Connector version R.9.0.4.2.60310
Downloaded version R.9.0.4.2.10.70412
The download seems to fix a whole lot of things. So far it has fixed my problem in Outlook! :-)

Similar Messages

Outlook 2013 - Calendar issues: Suggestions cannot be provided because free/busy data could not be retrieved

I noticed recently that I cannot see anymore free/busy information for my own organization colleagues.
I'm using Outlook 2013 (latest updates) upon Exchange 2010 (SP ?).
The suggestion DO work on my account using OWA.
Other users w/Outlook 2010 have no problems.
I tried to run "outlook /cleanfreebusy" but that switch isn't supported anymore in outlook 2013.
Anyone can help ?
Thanks

Hi,
I didn't say two but three places.
Actually, my wording is a bit confusing. In terms of where you go to remove them, it is indeed "Program and features" and "see installed updates". Now within there, I had the KB listed several times (3) under different products (like "Microsoft Outlook 2013"
and "Microsoft Office Professional Plus 2013") and I had to uninstall the KB from all three entries.
Note that, as per Robert Sparnaaij (http://www.howto-outlook.com, http://www.msoutlook.info)
: "I’m aware of the issues but they are not as black and white as the article(s) suggest(s) and not that widespread either to do a general recommendation to uninstall
a security update. In case of the IMAP issues, they are actually wrong.", and "It was said to
be fixed with Path Tuesday for December (December 10) but unfortunately somehow the Outlook 2013 update missed the cut. It got published on December 13 after all but only was approved a little over 24 hours ago as KB2850061. However, at the moment, only the
downloads are available but not yet the KB article nor are they currently being offered via Microsoft Update so unfortunately, the issue will drag on a bit longer. I’ve just published an article about it here:
http://www.howto-outlook.com/news/update-2013-12-ol2013.htm".
Lastly, "The KB article of the November update confirms that it fixes the Autodiscover connectivity issues with Exchange 2007:
If you are using Outlook to connect to a Microsoft Exchange Server 2007 mailbox:
You receive an error message that resembles either of the following when you try to configure Automatic Replies (Out of Office): Your automatic reply settings cannot be
displayed because the server is currently unavailable. Try again later.
You cannot retrieve Free/Busy data for calendar scheduling.
Add-ins that use the Account.SmtpAddress property no longer work.
These features rely on an underlying
Autodiscover technology. After you install this security update, Autodiscover may fail for Exchange 2007 configurations. Therefore, Outlook features that rely
on Autodiscover will also stop working. To resolve these issues, install update 2850061."
Hope this helps.

GW Business Data Provider failed

Hiie,
By following the below link i'm able to subscribe for workflow scenario,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b01f6a02-5464-2e10-bd8b-efa13d7f20b6?overridelayout=t…
but while trying to fetch workflow task collection system is raising the below error :
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>/IWFND/CM_IFL/003</code>
<message xml:lang="en">GW Business Data Provider failed</message>
<innererror>GW Business Data Provider failed.</innererror>
</error>
I have referred the below link:
https://scn.sap.com/thread/2090627
waiting for suggestions ..,

lokeswar reddy byni
Good to hear you have solved it by yourself. Please share the soltuion here so that it would be helpful for others.
Rgrds,
Jitendra

Public Folder Free/Busy event 4003 and 4004

Hello,
We migrated from exchange 2003 to 2010. Migration was successfull; all mailboxes are moved, public folder replicated and exchange 2003 was uninstalled like it should. Public Folder Hierarchy was moved to the new administrative group.
Since the last exchange 2003 server was uninstalled, we get events 4003 and 4003 on our CAS servers.
event id 4004
Process Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: Unable to find a public folder server for organizational unit (OU) EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT).
The service will attempt to find a random server, which may take a longer time to service the request.
event id 4003
Process Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: DAVPublicFolderRequest for 1 mailboxes at EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT) failed.
The exception returned is Microsoft.Exchange.InfoWorker.Common.Availability.PublicFolderRequestProcessingException: The public folder server for the given legacy mailbox was not found.. The request information is
<Null>.
. Name of the server where exception originated: CAS1. The Availability service could not successfully retrieve Schedule+ free/busy data for one or more legacy Exchange mailboxes.
To find the root cause of this error, increase the diagnostic logging level of the MSExchange Availability service
I have set the log level to expert, but no additional usefull information showed up. I can't find any legacy mailbox on the exchange 2010 servers.
I didn't receive any complaints about availability information so far. (all clients on OL2010)
Anyone an idea on how to solve this issue?
Thanx

http://social.technet.microsoft.com/Forums/exchange/en-US/3203b390-d52a-4e81-8a7e-c2266d909589/exchange-2010-cannot-see-freebusy-for-exchange-2003-mailboxes?forum=exchange2010

Update Statement With Decode and Business Dates

Hello everyone,
I need to write a UPDATE statement using business date rule. In general, the due date is 30 days from the checkout date. If the due date falls on a Saturday or Sunday then the loan period is 32 days.
I know that to test for a weekday, I'd need to use the to_char function in Oracle with the format of ‘D’. I did some research and found that to test which weekday November 12, 2007 falls on, I'd need to use the expression to_char(’12-NOV-2007’,’D’). This function returns a number between 1 and 7. 1 represents Sunday, 2 Monday, …,7 Saturday.
What I really would need to do is write one UPDATE statement using an expression with the Decode function and the to_Char function:
UPDATE book_trans SET due_dte = expression
These are the transactions that will need to be updated:
ISBN 0-07-225790-3 checked out on 15-NOV-2007 by employee 101(book_trans_id=1)
ISBN 0-07-225790-3 checked out on 12-NOV-2007 by employee 151(book_trans_id=2)
ISBN 0-201-69471-9 checked out on 14-NOV-2007 by employee 175(book_trans_id=3)
ISBN 0-12-369379-9 checked out on 16-NOV-2007 by employee 201(book_trans_id=4)
I manually calculated the due-dte and wrote update statement for each book_trans_id:
UPDATE book_trans SET due_dte = '17-dec-07' WHERE book_trans_id = 1;
UPDATE book_trans SET due_dte = '12-dec-07' WHERE book_trans_id = 2;
UPDATE book_trans SET due_dte = '14-dec-07' WHERE book_trans_id = 3;
UPDATE book_trans SET due_dte = '18-dec-07' WHERE book_trans_id = 4;
As you can see, it's very cumbersome and I'd just like to know how to incorporate everything in one Update statement:
UPDATE book_trans SET due_dte = expression
so that if due date falls on Saturday or Sunday, the loan period is 32 days; weekday, loan period is 30 days.
Any tips or help will be greatly appreciated. Thanks!

Hi,
882300 wrote:
Hello everyone,
I need to write a UPDATE statement using business date rule. In general, the due date is 30 days from the checkout date. If the due date falls on a Saturday or Sunday then the loan period is 32 days. That's equivalent to saying that the due date is normally 30 days after the checkout date, but if the checkout date falls on a Thursday or Friday, then the due date is 32 days after the checkout date. I used this equivalent in the statement below.
I know that to test for a weekday, I'd need to use the to_char function in Oracle with the format of ‘D’. I did some research and found that to test which weekday November 12, 2007 falls on, I'd need to use the expression to_char(’12-NOV-2007’,’D’). This function returns a number between 1 and 7. 1 represents Sunday, 2 Monday, …,7 Saturday.That's just one way to find out the weekday, and it's error-prone because it depends on your NLS_TERRITORY setting. A more reliable way is to use 'DY' or 'DAY' as the 2nd argument to TO_CHAR. That depends on NLS_DATE_LANGUAGE, but you can explicitly set the language in the optional 3rd argument to TO_CHAR, which means your code will work the same no matter what the NLS settings happen to be. It's also easier to debug: you may have to think whether '1' means Sunday or Monday, but it's easy to remember that 'SUN' means Sunday.
What I really would need to do is write one UPDATE statement using an expression with the Decode function and the to_Char function:
UPDATE book_trans SET due_dte = expressionHere's one way:
UPDATE book_trans
SET     due_dte = checkout_dte + CASE
                                  WHEN TO_CHAR ( checkout_dte
                                         , 'fmDAY'
                                 , 'NLS_DATE_LANGUAGE=ENGLISH'
                                 ) IN ('THURSDAY', 'FRIDAY')
                         THEN 32
                         ELSE 30
                              END
WHERE   book_trans_id      IN (1, 2, 3, 4)
;This assumes that checkout date is a column in the same table.

[Forum FAQ] Why can't I retrieve Free/Busy information

Free/Busy information is a feature of Microsoft Outlook that allows you to see when others are free or busy so that you can efficiently schedule meetings. You can use Microsoft Outlook to publish Free/Busy information to any server
your and your coworkers have read/write access to. However, in some cases you’ll notice that you can’t retrieve Free/Busy information correctly from Outlook. You can try the below methods to troubleshoot and get the Free/Busy information again.
Since most users who often use this feature are using Exchange, all the information in this content is only based on Exchange.
General troubleshooting methods:
Method 1: Start Outlook using the ‘/cleanfreebusy’ command line switch
Method 2: Logon OWA to see if the Free/Busy information shows correctly
Method 3: Check the user’s Permission Level when only one user’s Free/Busy information can’t be displayed
Other causes
Autodiscover has not been setup correctly
Updates
Here are the detailed steps and explanation of each method and cause.
Method 1: Start Outlook using the ‘/cleanfreebusy’ command line switch
With the ‘/cleanfreebusy’ switch, it will clear and regenerate free/busy information when Outlook starts, sometimes this process fixes the problem that Free/Busy information doesn’t display correctly, and this is always the first thing we should try when
we can’t get the Free/Busy information from Outlook.
This switch can only be used when you are able to connect to your Microsoft Exchange server.
To start Outlook using the switch, we can press Win Key +
R to start Run, type ‘outlook.exe /cleanfreebusy’ in the blank box, then press
Enter.
Please note since Outlook 2013 only uses the availability service which is connected to Autodiscover, the command line switch ‘/cleanfreebusy’ has been removed as well as the associated code so that Outlook 2013 will not recognize this
command.
Method 2: Logon OWA to see if the Free/Busy information shows correctly
If you are using Cached Exchange Mode in Outlook and having trouble getting the Free/Busy information, please logon OWA, or switch to Online Mode to see if the Free/Busy information shows correctly.
If the Free/Busy information shows correctly on OWA or in Online Mode, this problem may be caused by the Outlook Data File(.ost) corruption, which leads to the sync failure. Therefore we should exist Outlook, browse to the Data File and rename it to “.old”.
The next time Outlook starts, it will regenerate a Data File to sync and we can check if the Free/Busy information can be retrieved.
The location of the Data File can be found from File tab ->
Account Settings -> Account Settings ->
Data Files tab. (Outlook 2010 and Outlook 2013)
Or Tools menu -> Options ->
Mail Setup tab -> E-mail Account -> Account Settings window ->
Data Files tab. (Outlook 2007)
If on OWA it displays fine but doesn’t show the information correctly in neither Cached Exchange Mode nor Online Mode, it may be caused by the firewall or anti-virus settings, disable them to verify if they caused the problem.
Method 3: Check the user’s Permission Level when only one user’s Free/Busy information can’t be displayed
When a user has set his Calendar Permission to None, other people will not be able to see his Free/Busy information. When we notice that we can get most people’s Free/Busy information but fail to get one specific person’s, please consider
to check his Calendar Permission:
In that user’s Outlook, right click on his default Calendar, click Properties, select
Permissions tab.
We need to at least switch the Permission to Free/Busy time to get his Free/Busy information correctly.
Other cause 1: Autodiscover has not been setup correctly
From Outlook 2007, Outlook uses Autodiscover to get the Free/Busy information. Once Autodiscover has not been configured properly, the Free/Busy information may not display correctly. If you are also seeing issues with Out of Office assistant, we may assume
that you haven’t correctly setup Autodiscover, since these two symptoms are common when Autodiscover is not configured correctly.
To verify that, please test Outlook Autodiscover Connectivity:
http://technet.microsoft.com/en-us/library/bb123573.aspx
We can also learn Configure Exchange Services for the Autodiscover Service from:
http://technet.microsoft.com/en-us/library/bb201695.aspx
Since Autodiscover Service is more Exchange related, we need to seek Exchange support and post the question in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Other cause 2: Updates
Although Updates from Microsoft do no harm to the system for most of the time, the updates sometimes can mess things up.
Outlook 2013 November 2013 security update once became the culprit that caused some users not able to retrieve Free/Busy information from calendar scheduling. This occurs because Autodiscover fails for Exchange 2007 configurations. So in fact, this also
refers to the previous reason, Autodiscover is corrupted.
The fix for the issue above has been released:
http://support.microsoft.com/kb/2850061/en-us
Once you have some issues after updating and doubt it’s an update issue, you can always come to our forum to ask if there’s a recent update which causes the problem, we will be happy to support you. If a fix hasn’t been released yet, we suggest you uninstall
the suspicious ones from Control Panel -> Programs and Features ->
View installed updates to verify which caused the problem, also as a workaround.
Summary
The reason that we can’t get the correct Free/Busy information can vary. If you find it doesn’t work even after several general troubleshooting steps, please consider it’s Autodiscover related. For anyone who comes up against the issue that Free/Busy information
can’t be retrieved, please feel free to visit Outlook IT Pro Discussions from the URL:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook, we will be glad to help you.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

You should be charged, but that confirms the account. Same behavior with the app store...have to give login info evem for free downloads.

Free/Busy Error

Sun ONE Calendar Server 5.1.1 hf 1.16
Sync tool 1.1 patch 2
I tried to configure Free/Busy option, by putting the Search URL as :
http://<servername>/get_freebusy.wcap?fmt-out=text/calendar&tzid=timezone&mail=%NAME%@%SERVER%
However when I check on the user availability through outlook, it prompts and error:
An error occurred reading Internet free/busy data. General failure. The URL was ....
When I cut the URL and past on the browser, it said unauthorised, any idea ?

Yep, indeed it does, except the password works when carrying out an autodiscover test, when testing free/busy that error appears. Lookups for free/busy work from on-premise to cloud, cloud to on-premise does not work unless you explicitly allow permissions
on a user basis. The on-premise Exchange 2010 SP3 environment is using an external wildcard cert and thought this could be causing the issue, may consider updating to SAN based. What do you think?
Antonio Traetto

OWA 2010 address book error retrieving free/busy information

Hi All
I get the following error when viewing a contacts free/busy information in the OWA 2010 address book.
Outlook 2010 clients cannot view contacts free/busy information either. There's a "not connected" error on the client.
This issue started after a service pack or update was applied. Which one I don't know as it was done by another admin.
Has anyone seen this error before or does anyone know what this error is pointing to?
Many Thanks
Roger
Request
Url:
https://remote.mydomain.com:443/owa/ev.owa?oeh=1&ns=ReadADOrgPerson&ev=LID
User: Test User
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Test User7cc
SMTP Address: [email protected]
OWA version: 14.3.210.2
Mailbox server: SBS.mydomain.local
Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
System.Diagnostics.SharedPerformanceCounter.GetCategoryData()
System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
System.Diagnostics.PerformanceCounter.Initialize()
System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Microsoft.Exchange.InfoWorker.Common.Availability.Query`1.ExecuteWithPerformanceMeasurement()
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.<>c__DisplayClass6`1.b__5()
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.Set(String label, ThreadCounter threadCounter, ClientContext clientContext, RequestLogger requestLogger, ExecuteDelegate executeDelegate)
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.Set[T](String label, ThreadCounter threadCounter, ClientContext clientContext, RequestLogger requestLogger, ExecuteDelegate`1 executeDelegate)
Microsoft.Exchange.InfoWorker.Common.Availability.Query`1.Execute()
Microsoft.Exchange.Clients.Owa.Core.Utilities.ExecuteAvailabilityQuery(OwaContext owaContext, AvailabilityQuery query, Boolean expectFreeBusyResults, Boolean expectMergedFreeBusyResults, AvailabilityQueryResult& result)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPerson.GetFreeBusy(OwaContext owaContext, String recipientPrimarySmtpAddress, ExDateTime startDate, ExDateTime endDate, HttpContext httpContext, String& allDayFreeBusy, String& workingHoursFreeBusy, String&
oofMessage)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPersonEventHandler.RenderFreeBusyData(String smtpAddress, ExDateTime startDate, ExDateTime endDate, Boolean renderOof)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPersonEventHandler.LoadInitialData()

Free/busy data and the offline address book are two separate services.
Free/busy uses Exchange Web Services (EWS). The offline address book uses a different web service connecting to the OAB virtual directory.
Are you using SBS? SBS does some things differently so I recommend that you post this in the SBS Forum:
http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Change the default of Free/Busy for an event in Outlook 2010

Is it possible (as it was in old version) to set the Show As default for events?
Thanks

Hi,
The ‘Free/Busy’ information is used by the people who send Meeting requests, to determine whether a person is free or busy so that, they can know their availability status for Meetings. Below is a tutorial that will show you how to change the
Permissions for viewing a particular person’s Free/Busy information.
To change the Permissions for your Free/Busy Information, do the following
1) Click on the ‘File’ tab and then on the ‘Options’ tab.
2) In ‘Outlook Options’ window, click on the ‘Calendar’ tab.
3) Now inside the Calendar tab, under the ‘Calendar Options’ category, click on the ‘Free/Busy Options’ tab.
4) Now in the ‘Free/Busy Options’ window thus opened, you can choose to publish a certain number of Month’s calendars that contains your Free/Busy information and also change the time interval for updating your Free/Busy information.
5) You can also have your ‘Free/Busy’ information published on a particular Web location. To achieve this, select the checkbox that says ‘Publish at My location’ and in the space provided below, enter the specific location and click
on ‘OK’.
So, this is how you can change Permissions for viewing the Free/Busy information.
Sincerely

Free/busy information error for users whose primary SMTP is internal domain

We have a scenario where we have some users on our network who use s web-based mail service but have AD logins as they need access to internal resources (file and print).
We have been asked to set up access for these users to the meeting rooms. An initial idea was to create a mailbox for each of these people and set up them up with an email address in the internal domain (company.local.co.xx). This has allowed them to use
the meeting rooms but they cannot retrieve the free/busy information. When looking at available times, get the standard message "Suggestions cannot be provided because free/busy data could not be retrieved"
It's not really clear why this isn't working. Suggestions?

Thanks for the response. Those were my initial thoughts too.
However, doing a test of the email configuration shows that it successfully finds the OOF, OAB, etc.
Hi,
Since the OOF and OAB Urls can be retrieved properly from Autodiscover service, please directly access the OOF url from IE and see whether a proper XML file is returned.
Regards,
Winnie Liang
TechNet Community Support

Unable to Update PO Customerdata tab at Item level using BAPI_PO_CHANGE

Dear Experts,
I am unable to Update PO customer tab data at item level using BAPI :BAPI_PO_CHANGE.
I am passing the data structure through EXTENSIONOUT is refered with BAPIPAREX structure.
Can any one help on this.
Best regards,
Venkata Siva.

Hi Venkat,
Check this note 1033925.[Using Extension|Update EKKO table for the custom field through BAPI;
Regards,
Madhu.

Calendar Server Virtual Domains Free Busy - Access Denied

Version 6.3-11.01
I cannot get free busy to work with any domains but the default domain for the life of me.
The LDAP searches are going through and appear to be returning the correct values however on virtual domain calendars the following is returned:
PRODID:-//Sun/Calendar Server//EN
METHOD:PUBLISH
VERSION:2.0
X-NSCP-WCAP-ERRNO:28
END:VCALENDAR
I looked at the aces for the calendars in question:
Returns Free busy:
@@o^a^r^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g
Does Not return Free busy:
@@o^a^r^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g
I have tried enabling and disabling anonymous calendar access to no avail.
Is there a bug in this version that prevents the return of the free busy information?

Is this free-busy across domains i.e. [email protected] attempting to see free-busy information for [email protected] or inter-domain searches?
Inter-domain searches, or non logged in anonymous searches.
What client are you using to check free-busy information (Calendar Express, UWC/CE, Convergence, Thunderbird + Lightning Plugin) and what version are you running?
I am attempting to get it to work with the outlook 2007 plugin version: 7.3-05.01
Simply using the following:
curl http://hostname:3080/get_freebusy.wcap?mail=user@defaultdomain&fmt-out=text/calendar&noxtokens=1
Returns free busy
With hosted users I receive the access denied error. In outlook I receive an error: An error occurred reading Internet free/busy data. General Failure.
Does outlook require anonymous access to a calendar domain be enabled for get_freebusy?
>
You also need to check the icsExtendedDomainPrefs: attribute for the domain:
http://docs.sun.com/app/docs/doc/819-4437/6n6jckqsu?a=view
I have tried using this to enable anonymous access to no avail.
Thank you for your help!

GW Business Data Provider Problem

Hello everyone,
My company wants to implement SAP NG and we are trying trial version of NG 2.0. We have completed most of the steps of an RFC based GW consumption model.
We are having problem using and testing this consumption model.
When we first created consumption model, we get the URL:
http://*gateway.contoso.com*:8000/sap/opu/sdata/sap/USERMAINTAINRFC/?sap-client=001&$format=xml
When we pasted it in a browser, it couldn't find the server. So, we replaced server (gateway.contoso.com) with our (GW) system server (like 10.xxx.xx.67) Then we pasted modified URL and get the required XML. Similarly we can get metadata of this XML.
BUT, when we try to send request via browsers(Fİrefox, IE) or JAVA we get this error:
<error><code>/IWFND/CM_IFL/003</code>
<message xml:lang="en">GW Business Data Provider failed
</message><innererror>GW Business Data Provider failed.</innererror></error>
We used below code for the request:
http://10.xxx.xx.67:8000/sap/opu/sdata/sap/USERMAINTAINRFC/zya_user_rfcCollection
(zya_user_rfcCollection is one of the existing collections in XML)
We guessed that the problem is about the connection between SAP box and back-end system but not sure about that.
So, how can we fix that?
Thanks.
Kerim
Edited by: kerimmkilic on Jan 25, 2012 12:35 PM

Hi Pramila,
Could you please check if your service is configured properly. Generally one gets this error when the data provider is not configured against the model provider . You can view your configiration in spro.
This is the help link which might be helpful which has all the configuration information
http://help.sap.com/saphelp_gateway20sp05/helpdata/en/a1/bdaae2b2a94dd5bcb987638f5337e4/frameset.htm
Further you may go to "Settings for OData Channel Service Development on Backend System".
and check about your service.
I hope this will help you.
Thanks,
Mohan

Unable to update item master data after upgrade

Greetings,
I have just upgraded from 2005A SP01 PL22 to 8.81 PL05.
After the upgrade, I am unable to update any field in the item master data.
Error message:
In "Warehouses - Setup" window, on "Accounting" tab, choose sales-type revenue account , '_SYS00000001165' [Message 131-52]
I have checked all the warehouses accounting tab and all the revenue account is a sales type account. I have also checked the GL for _SYS00000001165 and it is a COGS GL. After I change its type to "Sales", I am able to update. This shouldn't be the case.
I have also tested creating and update new item master and I have no problem. However, I will have the same problem if i add a new item via duplicating from an old item.
Any advice?
Thank you.

Hi,
Can you also check whether the Item which you are trying to update has Manage G\L Account by as Item, Item group or Warehouse?
If you have checked for the Warehouses, check for the Item Group and at the G\L Determination > Inventory tab as well.
Kind Regards,
Jitin
SAP Business One Forum Team

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Unable to update public free/busy data. Operation Failed

Similar Messages

Maybe you are looking for