Unable to update to latest version.

FileHippo's update checker tells me that the latest version is Java Runtime Environment 8.0 build 5 (32-bit) 29.67MB, and that my installed version is 7.0.550.14.0, which is correct.
However, the java.com website tells me that the latest version is Version 7 Update 55. 
After downloading the file file suggested by FileHippo and running it, I am presented with the message
"The procedure entry point RegDeleteKeyExA could not be located in the dynamic link library ADVAPI.dll"
What can I do to overcome this?
And why does FileHippo claim that the latest version is not the same as that claimed by java.com? 

not a discrimination but nokia work with operators in each region to adjust the update so expect delays of weeks or even months from region to region unless nokia changes its update deployement plan
vandelay wrote:
Other people can update their software but I cannot. What's wrong?
Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates.
Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available.
Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay. New software may become available at a later date, however, so please check again soon.
/discussions/board/message?board.id=swupdate&thread.id=21323
Message Edited by wtever on 09-Sep-2009 12:02 AM

Similar Messages

  • Unable to update to latest version of Adobe Muse.

    As you can see from the attached screen capture, I am having issues updating to the latest version of Adobe Muse. I am doing all of this via the update prompt that pops-up when I launch Muse.
    Any suggestions as to how to rectify this issue?
    Cheers,
    Richard

    Hello Richard,
    Please follow the steps below in order to install Adobe Muse on your Mac machine :
    1) Ensure that Muse is completely uninstalled: drag Adobe Muse from the Applications folder to the trash and empty the trash.
    2) Download Muse from the following link: http://labsdownload.adobe.com/pub/adobemuse/builds/muse_2-3_install_mac.dmg.
    3) Install
    Please note that this build won't work if Muse is already installed; you must uninstall previous versions of Muse first.
    Hope this helps.
    Regards,
    Sachin

  • Unable to update the latest version of Nokia N97 f...

    why Indians are neglected it has been days since latest version of N97 firmware has been launched by nokia till date we are struck in 11.0.021 why this discrimination ? 
    Solved!
    Go to Solution.

    not a discrimination but nokia work with operators in each region to adjust the update so expect delays of weeks or even months from region to region unless nokia changes its update deployement plan
    vandelay wrote:
    Other people can update their software but I cannot. What's wrong?
    Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates.
    Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available.
    Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay. New software may become available at a later date, however, so please check again soon.
    /discussions/board/message?board.id=swupdate&thread.id=21323
    Message Edited by wtever on 09-Sep-2009 12:02 AM

  • HT5191 Lost my ability to burn discs, unable to update to latest version, getting "beep" noise every time i select songs in itunes

    Unable to burn discs, will not download lastest version of itunes, beep noise when selecting songs in my itues library

    Some things that might help:
    Restore one or all the devices as "new" and start from scratch.
    Use playlists to control what syncs to the devices.
    Create a "new" library in a different directory and see if that resolves the ongoing issue.

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Having difficulty updating to latest version of iTunes for my PC. Originally got C   runtime error response. Uninstalled iTunes, then tried reinstalling and now receiving "service (Apple Mobile Device) failed to start" response.

    When attempting to update to latest version of iTunes on my PC (11.1.4) I received an error message: Microsoft Visual C++ Runtime error as well as: AppleSync Notifier.exe - entry point not found, the procedure entry point sqlite_wal_checkpoint cound not be located in the dynamic link library SQLite3.dll.
    I unistalled iTunes, then attempted to reinstall. I get to a point where I receive the following response: Service (Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services." I'm stuck at this point and unable to proceed with install. Help please!

    Hi yuiopyy,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • Unable to install the latest version of Adobe Muse via Adobe Application Manager

    I´m a user of Creative Suite applications  and all of them have been updated successfully with the exception of the latest version of Adobe Muse.
    I´m unable to install it. I get error DW 050
    I´m using Windows 7 64 bit.
    All previous versions of Adobe Muse have been installed OK.
    Following a forum discussion I could read, I uninstalled the previous version, but the installation fails again.
    Does any body know how to solve this issue?

    Dear Sachin:
    Thank you for your help, however I have to get back to you to inform that after  downloading the new package based on the link that you´ve provided, I´m  still unable to execute the application.  I get the message: “block by the administrator”  and also another message: “the editor of this program is unknown and unsafe”. Please note that all other programs from Adobe´s Creative Cloud have been downloaded and installed with success. All Adobe Creative programs have been installed on my computer several months ago and all are working fine so far.  This morning I installed an update for Photoshop without  any problem. It seems that the problem persists only with Muse. I have to highlight that I´m the administrator of my PC and therefore all applications are currently being executed as administrator. I have never had the intention to block any program, including obviously Adobe´s Creative Suite programs.
    Could you please let me know how to splve this problem?
    Michael.
    De: Sachin Hasija [email protected]
    Enviado el: lunes, 28 de enero de 2013 18:57
    Para: retonxxy
    Asunto: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    Re: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    created by Sachin Hasija <http://forums.adobe.com/people/Sachin+Hasija>  in Help with using Adobe Muse - View the full discussion <http://forums.adobe.com/message/5028441#5028441

  • Problem after updating to latest version 10.0.1

    After updating to latest version 10.0.1, every time Firefox starts it checks for add-ons compatibility before opening, this is very irritating. How can I stop this?

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

  • Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini.  I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" w Couldn't open  without Iwork (don't have)  Help!

    Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini.  I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" with terms. Couldn't open  this without Iwork which I don't have.  Help!  Carolyn

    Hello, no way you should need iWork to "Agree"!?
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    And if you're really at 10.4.2, then get this and apply it...
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    Repair Permissions afterwords, reboot.

  • HT1926 Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

    Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

    This happened to me today as well post installing the latest version of itunes.   I did a search on google for the error and came across a recommendation to :
    Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
    If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
    Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
    Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
    Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
    A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

  • HT4623 I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help

    I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help

    See Here  >  http://support.apple.com/kb/HT1808
    If using Windows...
    Temporarily disable your firewall and antivirus software and try again...
    http://support.apple.com/kb/TS1379
    See iTunes Connection Issues here...
    iTunes for Windows: Troubleshooting security software issues
    EMPJ wrote:
    Spends 3 hours downloading latest software then says unable to restore
    If the issue persists, take the Device to any Apple Store for evaluation. Be sure to make an appointment first.

  • My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

    My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
    The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
    Thanks

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • Firefox updated to latest version, now I can not enter data in a discussion board dialog box in Blackboard. IE8 had same problem, change to compatability mode and IE functions. Any fix for firefox?

    Am using Blackboard to teach classes at college. Have not updated firefox at college, works great. Wife hit yes to update to latest version last week. Now can nan not reply in the discussion board, the curser is not recognized in the dialog box.

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

  • Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

    Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

Maybe you are looking for

  • Warning -- Release Preview + T60p = Fail

    General warning to those thinking about trying Windows 8, release preview, on a T60p. Not sure what they did with release preview, but it's simply awful. It doesn't recognize nearly any of the drivers for T60p hardware -- most notably the display ada

  • Habitual Script Errors with Verson 29.0.1

    While pop-up script errors have bedeviled Firefox since nearly forever, I've found after upgrading to version 29.0.1 to have even more of a problem with this. In particular, on the website http://www.wonkette.com/ I've had a terrible time just in the

  • A problem with jFileChooser

    I'm creating a GUI application in NetBeans, where I'm using jFileChooser object to select a file when a user clicks a button, the filechooser dialog appears and doesn't respond to the user's action but after closing the file chooser using the close b

  • Apps store frozen

    Just got a new iPhone 4s 16gb yesterday and trying to install instagram app. Went into app store, found instagram, brought the install page up but it is frozen. Won't let me click on install, won't let me go back, won't let me click on the bottom too

  • AS2 debugger insta-crash in CS3/Mac

    I'm running Flash CS3 on an intel mac (macbook pro). When debugging an AS2 project, if I press opt-F7 to step over a line of code the flash IDE immediately crashes. I can click the debugger icon to step over so it's something about the keypress in pa