Unable to update using WSUS - No Client Detection
Hi,
I have recently implemented several Server 2012 machines onto our network - These are set to replace our old 2003 Servers.
The new 2012 Servers are being configured to overtake the roles that I had setup on the 2003 Servers.
I am currently trying to configure WSUS on a new 2012 Server - This appears to be configured correctly but I am having issues with the client machines connecting to the WSUS server - The client machines are set to pick up the WSUS server via GPO.
It appears that the WSUS server is being blocked by our Proxy server - Although the Proxy server (TMG) is set to allow internal traffic.
Looking at the Windows update log - I am getting the below errors.
2015-02-03 09:59:28:996 536 c98 AU AU received policy change subscription event
2015-02-03 10:00:50:736 536 3874 AU Triggering AU detection through DetectNow API
2015-02-03 10:00:50:736 536 3874 AU Triggering Online detection (non-interactive)
2015-02-03 10:00:50:737 536 c98 AU #############
2015-02-03 10:00:50:737 536 c98 AU ## START ## AU: Search for updates
2015-02-03 10:00:50:737 536 c98 AU #########
2015-02-03 10:00:50:739 536 c98 AU <<## SUBMITTED ## AU: Search for updates [CallId = {D6E096AD-8B3E-4A0E-B638-756CFBBF0833}]
2015-02-03 10:00:50:739 536 2a64 Agent *************
2015-02-03 10:00:50:739 536 2a64 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 10:00:50:739 536 2a64 Agent *********
2015-02-03 10:00:50:739 536 2a64 Agent * Online = Yes; Ignore download priority = No
2015-02-03 10:00:50:739 536 2a64 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-03 10:00:50:739 536 2a64 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-03 10:00:50:739 536 2a64 Agent * Search Scope = {Machine}
2015-02-03 10:00:50:739 536 2a64 Setup Checking for agent SelfUpdate
2015-02-03 10:00:50:740 536 2a64 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-02-03 10:00:50:884 536 2a64 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f6
2015-02-03 10:00:50:884 536 2a64 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f6
2015-02-03 10:00:50:884 536 2a64 Misc WARNING: DownloadFileInternal failed for http://gbsal01-wsv001:8080/selfupdate/wuident.cab: error 0x801901f6
2015-02-03 10:00:50:884 536 2a64 Setup FATAL: DownloadCab failed, err = 0x801901F6
2015-02-03 10:00:50:884 536 2a64 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80244021
2015-02-03 10:00:50:884 536 2a64 Setup FATAL: SelfUpdate check failed, err = 0x80244021
2015-02-03 10:00:50:885 536 2a64 Agent * WARNING: Skipping scan, self-update check returned 0x80244021
2015-02-03 10:00:50:889 536 2a64 Agent * WARNING: Exit code = 0x80244021
2015-02-03 10:00:50:889 536 2a64 Agent *********
2015-02-03 10:00:50:889 536 2a64 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 10:00:50:889 536 2a64 Agent *************
2015-02-03 10:00:50:889 536 2a64 Agent WARNING: WU client failed Searching for update with error 0x80244021
2015-02-03 10:00:50:889 536 4170 AU >>## RESUMED ## AU: Search for updates [CallId = {D6E096AD-8B3E-4A0E-B638-756CFBBF0833}]
2015-02-03 10:00:50:889 536 4170 AU # WARNING: Search callback failed, result = 0x80244021
2015-02-03 10:00:50:889 536 4170 AU # WARNING: Failed to find updates with error code 80244021
2015-02-03 10:00:50:889 536 4170 AU #########
2015-02-03 10:00:50:889 536 4170 AU ## END ## AU: Search for updates [CallId = {D6E096AD-8B3E-4A0E-B638-756CFBBF0833}]
2015-02-03 10:00:50:889 536 4170 AU #############
2015-02-03 10:00:50:890 536 4170 AU Successfully wrote event for AU health state:0
2015-02-03 10:00:50:890 536 4170 AU AU setting next detection timeout to 2015-02-03 15:00:50
2015-02-03 10:00:50:890 536 4170 AU Setting AU scheduled install time to 2015-02-03 12:00:00
2015-02-03 10:00:50:891 536 4170 AU Successfully wrote event for AU health state:0
2015-02-03 10:00:50:892 536 4170 AU Successfully wrote event for AU health state:0
Does anyone have any ideas please?
Thanks
Tom
Does anyone have any ideas please?
2015-02-03 10:00:50:884 536 2a64 Misc WARNING: DownloadFileInternal failed for http://gbsal01-wsv001:8080/selfupdate/wuident.cab: error 0x801901f6
What's with the port 8080 ???
It appears that the WSUS server is being blocked by our Proxy server - Although the Proxy server (TMG) is set to allow internal traffic.
Why is *internal* traffic even going near the TMG server?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2015)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Similar Messages
-
CLIENT UNABLE TO UPDATE from WSUS SERVER
Dear all
we have a WSUS server installed on windows server 2012, the clients is no longer able to download updates, getting error WindowsUpdate_80072EE2" "WindowsUpdate_dt000"
here is the client log file
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
Bypass List used : <(null)> Auth Schemes used : <>
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://rwf-1:8530/selfupdate/wuident.cab>.
error 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed.
error 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-02-17 18:20:13:358 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-02-17 18:20:13:363 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:365 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-02-17 18:20:13:371 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:379 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-02-17 18:20:13:385 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:400 1024 f98 Setup Determining whether a new setup handler needs to be downloaded
2014-02-17 18:20:13:400 1024 f98 Setup SelfUpdate handler is not found. It will be downloaded
2014-02-17 18:20:13:400 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:403 1024 f98 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:403 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:414 1024 f98 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:414 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:432 1024 f98 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:432 1024 f98 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-02-17 18:20:13:723 1024 f98 PT +++++++++++ PT: Synchronizing
server updates +++++++++++
2014-02-17 18:20:13:723 1024 f98 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL
= http://rwf-1:8530/ClientWebService/client.asmx
2014-02-17 18:20:13:858 1024 f98 PT WARNING: Cached cookie has expired or new PID is available
2014-02-17 18:20:13:858 1024 f98 PT Initializing simple targeting cookie, clientId = 5c40eee5-ae54-4cbd-8758-a694a59ade20,
target group = ROLMAN, DNS name = it.rolmanworld.com
2014-02-17 18:20:13:858 1024 f98 PT Server URL = http://rwf-1:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-02-17 18:21:14:006 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
2014-02-17 18:21:14:006 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
Bypass List used : <(null)> Auth Schemes used : <>
2014-02-17 18:21:14:006 1024 f98 PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status
code = 0
2014-02-17 18:21:14:006 1024 f98 PT + Caller provided credentials = No
2014-02-17 18:21:14:006 1024 f98 PT + Impersonate flags = 0
2014-02-17 18:21:14:006 1024 f98 PT + Possible authorization schemes used =
2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie failure, error = 0x80072EE2, soap client error = 5, soap
error code = 0, HTTP status code = 200
2014-02-17 18:21:14:006 1024 f98 PT WARNING: PTError: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie_WithRecovery failed : 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshCookie failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshPTState failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: Sync of Updates: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: SyncServerUpdatesInternal failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 Agent * WARNING: Failed to synchronize, error = 0x80072EE2
2014-02-17 18:21:14:009 1024 f98 Agent * WARNING: Exit code = 0x80072EE2
2014-02-17 18:21:14:009 1024 f98 Agent *********
2014-02-17 18:21:14:009 1024 f98 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-02-17 18:21:14:009 1024 f98 Agent *************
2014-02-17 18:21:14:009 1024 f98 Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2014-02-17 18:21:14:024 1024 d9c AU >>## RESUMED ## AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
2014-02-17 18:21:14:024 1024 d9c AU # WARNING: Search callback failed, result = 0x80072EE2
2014-02-17 18:21:14:024 1024 d9c AU # WARNING: Failed to find updates with error code 80072EE2
2014-02-17 18:21:14:024 1024 d9c AU #########
2014-02-17 18:21:14:024 1024 d9c AU ## END ## AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
2014-02-17 18:21:14:024 1024 d9c AU #############
2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:14:024 1024 d9c AU AU setting next detection timeout to 2014-02-17 19:21:14
2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:14:025 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:19:010 1024 f98 Report REPORT EVENT: {37C49AAA-0782-441A-85BD-BC86F384B332}2014-02-17 18:21:14:009+0400 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072ee2AutomaticUpdates Failure Software
Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2014-02-17 18:21:19:060 1024 f98 Report CWERReporter::HandleEvents - WER report upload completed with status
0x8
2014-02-17 18:21:19:060 1024 f98 Report WER Report sent: 7.6.7600.256 0x80072ee2 00000000-0000-0000-0000-000000000000
Scan 101 Managed
2014-02-17 18:21:19:060 1024 f98 Report CWERReporter finishing event handling. (00000000)
I've tried all the ways, restarting the services, file permissions, and many other
PLEASE HELP
thank youthank you for your reply,
I tried so many ways but couldn't solve it, then I removed the WSUS rule, and re-install it
then after installing the rule i'm getting error when configuring the WSUS ERROR : http://i.imgur.com/eqm9ViT.png
Post install is starting
Fatal Error: Failed to start and configure the WSUS service
and here is the log file
2014-02-20 08:37:47 Postinstall started
2014-02-20 08:37:47 Detected role services: Api, UI, WidDatabase, Services
2014-02-20 08:37:47 Start: LoadSettingsFromParameters
2014-02-20 08:37:47 Content local is: True
2014-02-20 08:37:47 Content directory is: E:\WSUS
2014-02-20 08:37:47 SQL instname is:
2014-02-20 08:37:47 End: LoadSettingsFromParameters
2014-02-20 08:37:47 Start: Run
2014-02-20 08:37:47 Configuring content directory...
2014-02-20 08:37:47 Configuring groups...
2014-02-20 08:37:48 Starting group configuration for WSUS Administrators...
2014-02-20 08:37:48 Found group in regsitry, attempting to use it...
2014-02-20 08:37:48 Searching for existing group...
2014-02-20 08:37:48 Existing group was found
2014-02-20 08:37:48 Writing group to registry...
2014-02-20 08:37:48 Finished group creation
2014-02-20 08:37:48 Starting group configuration for WSUS Reporters...
2014-02-20 08:37:48 Found group in regsitry, attempting to use it...
2014-02-20 08:37:48 Searching for existing group...
2014-02-20 08:37:48 Existing group was found
2014-02-20 08:37:48 Writing group to registry...
2014-02-20 08:37:48 Finished group creation
2014-02-20 08:37:48 Configuring permissions...
2014-02-20 08:37:48 Fetching content directory...
2014-02-20 08:37:48 Fetching ContentDir from registry store
2014-02-20 08:37:48 Value is E:\WSUS
2014-02-20 08:37:48 Fetching group SIDs...
2014-02-20 08:37:48 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:48 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:48 Fetching WsusReportersSid from registry store
2014-02-20 08:37:48 Value is S-1-5-21-495251104-1553465597-2720485832-1635
2014-02-20 08:37:48 Creating group principals...
2014-02-20 08:37:49 Granting directory permissions...
2014-02-20 08:37:49 Granting permissions on content directory...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Configuring shares...
2014-02-20 08:37:49 Configuring network shares...
2014-02-20 08:37:49 Fetching content directory...
2014-02-20 08:37:49 Fetching ContentDir from registry store
2014-02-20 08:37:49 Value is E:\WSUS
2014-02-20 08:37:49 Fetching WSUS admin SID...
2014-02-20 08:37:49 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:49 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:49 Content directory is local, creating content shares...
2014-02-20 08:37:49 Creating share "UpdateServicesPackages" with path "E:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published on this WSUS system."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:49 Creating share...
2014-02-20 08:37:49 Share successfully created
2014-02-20 08:37:49 Creating share "WsusContent" with path "E:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:49 Creating share...
2014-02-20 08:37:49 Share successfully created
2014-02-20 08:37:49 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:50 Creating share...
2014-02-20 08:37:50 Share successfully created
2014-02-20 08:37:50 Finished creating content shares
2014-02-20 08:37:50 Configuring WID database...
2014-02-20 08:37:50 Configuring the database...
2014-02-20 08:37:50 Establishing DB connection...
2014-02-20 08:37:50 Checking to see if database exists...
2014-02-20 08:37:50 Database exists
2014-02-20 08:37:50 Switching database to single user mode...
2014-02-20 08:37:53 Loading install type query...
2014-02-20 08:37:53 DECLARE @currentScriptVersion int
DECLARE @currentDBVersion int
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentScriptVersion = (9200 + 16384)
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE IF @currentDBVersion < @currentScriptVersion
BEGIN
SELECT 2
END
ELSE IF @currentDBVersion = @currentScriptVersion
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
2014-02-20 08:37:53 Install type is: Reinstall
2014-02-20 08:37:53 Creating logins...
2014-02-20 08:37:53 Fetching account info for S-1-5-20
2014-02-20 08:37:53 Found principal
2014-02-20 08:37:53 Found account
2014-02-20 08:37:53 Got binary SID
2014-02-20 08:37:53 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:53 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Found principal
2014-02-20 08:37:53 Found account
2014-02-20 08:37:53 Got binary SID
2014-02-20 08:37:53 Setting content location...
2014-02-20 08:37:53 Fetching ContentDir from registry store
2014-02-20 08:37:53 Value is E:\WSUS
2014-02-20 08:37:53 Swtching DB to multi-user mode......
2014-02-20 08:37:56 Finished setting multi-user mode
2014-02-20 08:37:56 Writing DB settings to registry...
2014-02-20 08:37:56 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-02-20 08:37:56 Configuring IIS...
2014-02-20 08:37:56 Start: ConfigureWebsite
2014-02-20 08:37:56 Configuring website on port 8530
2014-02-20 08:38:48 2014-02-20 08:38:10 Info IISCustomAction Performing Setup Action, Command /Install
2014-02-20 08:38:46 Info IISCustomAction Command /Install Succeeded
2014-02-20 08:38:48 End: ConfigureWebsite
2014-02-20 08:38:48 Configuring performance counters...
2014-02-20 08:38:48 Configuring Stats.NET perf counter...
2014-02-20 08:38:48 Configuring reporting perf counter...
2014-02-20 08:38:48 Configuring client webservice perf counter...
2014-02-20 08:38:48 Configuring server sync webservice perf counter...
2014-02-20 08:38:48 Configuring API remoting perf counter...
2014-02-20 08:38:48 Bringing services online...
2014-02-20 08:38:48 Checking initialization status...
2014-02-20 08:38:48 StartServer starting...
2014-02-20 08:38:48 Generating encryption key to write to the registry...
2014-02-20 08:38:48 Generating encryption key to write to the database...
2014-02-20 08:38:48 Generating encryption key succeeded...
2014-02-20 08:38:48 Setting WSUSService to autostart...
2014-02-20 08:38:48 WSUSService is set to autostart.
2014-02-20 08:38:48 Starting WSUSService...
2014-02-20 08:38:48 Failed to start WsusService. Exception: System.InvalidOperationException: Cannot start service WSUSService on computer '.'. ---> System.ComponentModel.Win32Exception: An instance of the service is already running
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.UpdateServices.Setup.StartServer.StartServer.StartAndConfigureService()
2014-02-20 08:38:48 Importing default detectoids.
2014-02-20 08:38:48 Importing CriticalUpdates.xml...
2014-02-20 08:38:49 Importing Drivers.xml...
2014-02-20 08:38:49 Importing FeaturePacks.xml...
2014-02-20 08:38:49 Importing MicrosoftCorporation.xml...
2014-02-20 08:38:49 Importing SecurityUpdates.xml...
2014-02-20 08:38:49 Importing ServicePacks.xml...
2014-02-20 08:38:49 Importing Tools.xml...
2014-02-20 08:38:49 Importing UpdateRollups.xml...
2014-02-20 08:38:49 Importing Updates.xml...
2014-02-20 08:38:49 Importing Windows.xml...
2014-02-20 08:38:49 Importing Windows2000family.xml...
2014-02-20 08:38:49 Importing WindowsServer2003DatacenterEdition.xml...
2014-02-20 08:38:50 Importing WindowsServer2003Family.xml...
2014-02-20 08:38:50 Importing WindowsXPfamily.xml...
2014-02-20 08:38:50 Importing LocalPublisher.xml...
2014-02-20 08:38:50 Importing LocallyPublishedPackages.xml...
2014-02-20 08:38:50 Importing Applications.xml...
2014-02-20 08:38:50 Importing Exchange.xml...
2014-02-20 08:38:50 Importing Office.xml...
2014-02-20 08:38:50 Importing SQL.xml...
2014-02-20 08:38:50 Importing Exchange2000Server.xml...
2014-02-20 08:38:50 Importing ExchangeServer2003.xml...
2014-02-20 08:38:50 Importing OfficeXP.xml...
2014-02-20 08:38:50 Importing Office2003.xml...
2014-02-20 08:38:50 Importing SQLServer.xml...
2014-02-20 08:38:50 Importing WindowsXP64BitEditionVersion2003.xml...
2014-02-20 08:38:50 Importing DefinitionUpdateSusXml.xml...
2014-02-20 08:38:50 Importing ClientServicingApiDetectoid.xml...
2014-02-20 08:38:50 Importing default detectoids succeeded.
2014-02-20 08:38:52 FixSubscriptionCategories failed. Exception: System.Net.WebException: The request failed with HTTP status 400: Bad Request.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.Internal.ApiRemoting.GetServerVersion()
at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.GetServerVersion()
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.CreateUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer..ctor(Boolean bypassApiRemoting)
at Microsoft.UpdateServices.Setup.StartServer.StartServer.FixSubscriptionCategories()
2014-02-20 08:38:52 StartServer encountered errors. Exception=The request failed with HTTP status 400: Bad Request.
2014-02-20 08:38:52 Microsoft.UpdateServices.Administration.CommandException: Failed to start and configure the WSUS service
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
PLEASE HELP
BEST REGARDS -
Unable to update/use Adobe - error 'File Missing'
Have done everything possible, there is no file to find. Attempted to uninstall all Adobe on PC;' Fatal Error' -a Drive/File missing, cannot remove Adobe, This leaves me without PDf, Acrobat, all products. Microsoft answer: : "for $198.00 will repair". Take A Hike! Windows 8.1 PRO. HELP! M. ONEILL
The description of your problem is very sketchy; I'm not quite sure what you experience.
Try removing Adobe Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the installer from http://get.adobe.com/reader/enterprise/
If that does not help, please provide more information about your problem. -
Unable to install security updates via WSUS on Windows 2008 client servers
When I try install to install updates on Windows 2008 client servers I get the error : Code 80244019 Windows Update encountered an unknown error
After running the WSUS Client Diagnostic Tool I get the result : GetFileVersion(szEngineDir,&susVersion) failed with hr=0x80070002 The system cannot find the file specified.
On a Windows 2003 server the WSUS Client Diagnostic Tool shows no error message. So I guess the problem seems to be specificly related to Windows 2008 servers.
The client server has been integrated into a WSUS console version 3.2.7600.226 runnning on a Windows 2003 Enterprise Edition SP2.
Thanks in advance for the help in resolving this issue.When I try install to install updates on Windows 2008 client servers I get the error : Code 80244019 Windows Update encountered an unknown error
The 0x80244019 error is an HTTP 404 error and when encountered trying to "install updates", which really occurs when trying to
download the update files so that the updates can be installed, is almost always a function of the desired file having been manually deleted from the WSUS server. The file that should be there for the needed update, isn't, but it used to be.
If all of the clients are getting this error on all updates, then that's a function of the content store on the WSUS server being missing, in the wrong place, or configured with the wrong ACLs.
After running the WSUS Client Diagnostic Tool I get the result : GetFileVersion(szEngineDir,&susVersion) failed with hr=0x80070002
This result is inconclusive, and not really relevant. The CDT is 32-bit only and can't be used on 64-bit systems. Plus, we already know the client is talking to the WSUS server -- you've reported the error code -- so the Client Diagnostic Tool will
tell us nothing of use at this point (even if it did work on 64-bit systems).
On a Windows 2003 server the WSUS Client Diagnostic Tool shows no error message.
Cool. It works on a 32-bit system.
So I guess the problem seems to be specificly related to Windows 2008 servers.
No... BUT... allow me to make an example of this for just a moment, and forgive me for that.
This is a great example of arriving at the wrong conclusion, caused by not considering ALL of the differences, as well as the scope and capability of the diagnostics performed. The error is not because one is '2003' and the other '2008; the error is because
one is 'x86' and the other is (obviously) 'x64'. And, in either case, diagnosing the client was wasted effort because the client is already working. (It got a real HTTP error message from the WSUS server.)
Now, we need to get some real diagnostic information to find out why you're getting this error code. :-)
Please post the actual entries from the WindowsUpdate.log where this error code appears, plus a hundred lines prior, and let's get some context around the error code, and the exact update that's involved in this issue.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Forefront Client Security to use Windows updates when WSUS not available
Hi all,
We currently deploy Forefront Client Security as our AV product to our estate and we use WSUS to get any definition update required.
However, we have a number of laptops that have been taken off site and have not been receiving any virus definition updates because they are off the domain.
We have a GPO in place that disables Windows Updates on all clients and redirects it to our WSUS server and we then use SCCM to push out our updates.
We also have a VPN client that won't allow you to connect to the network unless your virus definitions are up to date. This is obviously an issue as anyone who has a laptop and hasn't connected to the domain in a while won't have the latest windows updates
or virus definitions applied.
We need a way of ensuring those laptops get the latest updates before connecting via VPN.
Is there any way to do this?
Rgds,
MarkHi,
You could use NAP feature in SCCM 2007 which can help protect the integrity of your enterprise network to enforce compliance of software updates on client computers.
For more information:
http://technet.microsoft.com/en-us/library/bb693725.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows 8.1 will not get Forefront Client Updates from WSUS
Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx -
Using WSUS to update customer workstations pre-delivery
Hi,
We intermittently, as a company, supply PCs to customers 5-20 at a time and windows update each one separately. Can WSUS be used to update these non domain joined workstations to save time and our broadband? If not, is there a method others use to update
a bunch of workstaions before delivering to their clients?
thanks in advance,
DaveMakes sense, Dave.
One additional item I'll share. Since you're doing this to essentially do post-OS-deploy patch remediation, you may also find some value in using approval deadlines in conjunction with those new machines, along with a 2-hour detection frequency. This will
effectively allow you to patch those systems virtually hands-free and probably in less than a workday.
Store a REG file on a thumb drive. Import the REG file and restart the WUA service (or reboot the client). The WUA will run a scan automatically on service restart, and every 95-120 minutes thereafter until all available updates have been installed.
The actual number of cycles needed will depend on whether there are any exclusive updates in the patch collection (e.g. .NET Service Packs most notably) which will trigger their own installation/reboot cycle, but my expectation would be that almost any machine
can be completed in three cycles ... which would be about four hours from the time you point the client to the WSUS server and reboot.
Resist the temptation to use the 1-hour detection frequency, unless you also configure the WUA to use client-side targeting (which is really dependent upon how you currently manage your WSUS environment). If you're using client-side targeting and a 1-hour
detection, the update cycles could complete in as little as 2 hours.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Zero configuration for clients to use WSUS?
Hi all,
Just wondering if it's at all possible to set up WSUS to work without any configuration on the client end of things? Or at least minimal configuration.
We're a tech store, running/working on primarily Macs. We often have client's bring PC machines in, or VMs to install on the Macs, and I'm tired of waiting for updates to download on them.
Ideally, I'd have it like OS X Cache Server, I realize this is quite a bit different than how WSUS works, but I'd like to have the ability to simply connect the client's computer to the network and have it fetch the updates from my WSUS server instead of
re-downloading them all.
Thanks,Just wondering if it's at all possible to set up WSUS to work without any configuration on the client end of things?
No.
Or at least minimal configuration.
The minimal configuration is that you have to tell it to use WSUS and where the WSUS Server is found. This is done by setting the policy setting
Specify Microsoft intranet update server location.
We often have client's bring PC machines in, or VMs to install on the Macs, and I'm tired of waiting for updates to download on them.
The best approach here is to create two REG files and put 'em on a thumb drive. One REG file SETS the policy to point the client to your WSUS server. The other REG file UNSETS the policy so the client reverts to being what it was before.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
How do you effectively use WSUS/Windows Updates in a mobile/laptop environment?
Hey everyone, I have a question about properly using WSUS and/or Windows Update to properly patch laptops. We provide our users with laptops and a large number of them work from home throughout the week. We want to make sure they're being properly updated,
but also make sure we can control what updates are installed on the machines. It's my understanding that it is against the EULA to make a WSUS server available to the outside world. To me, this leaves a weird gap within the Windows Update world where you either
get all updates from Microsoft's servers or you get updates only when you're onsite at your business.
I found a neat utility graciously created by the developer(s) of ABC-Deploy, called ABC-Update. This provides a utility to install, uninstall, update, or filter out any updates you wish. You can even have it run against your WSUS server. You could create a
script that runs as a scheduled task to run against WSUS when you're onsite (assuming you have a static public IP) or against Microsoft Update (and filtering out the updates using the /K option). Not perfect, but it seems to do an OK job. My worry is the list
of updates you'd have to filter out using the /K option could become rather large.
I was wondering what everyone else does to properly patch their mobile/laptop environments?
If there's no good solution, I'd love to get in contact with someone at Microsoft to work on this.Do check with MS on that EULA thing. It sounds strange that it is against EULA assuming you require client authentication when accessing published WSUS server. I have also seen several blog posts from MS describing publishing procedure (for example
this one from WSUS support blog)
Otherwise, I'm affraid, there is no "lightweight" way to do this without using third party soft or doing some programming of your own. One option is using System Center Configuration Manager to manage windows updates. It does support management
of clients over internet, but requires deployment of a number of new servers and services in your network. Another option is deploying direct access in your environment to provide client computers with seemless connection to corporate network. In this case
you can use WSUS to manage updates and collect statistic, while clients can be configured to downloads update content from the internet.
Gleb. -
I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3). A message advises that it's not possible to removed old artwork if it's embedded. How can I 'unembed' old cover art and replace?
Normally artwork recovered with iTunes is stored as a separate artwork file and iTunes refers to that file to display artwork when you click on a track. However, if you then copy the file to another player the artwork file is left behind and the track will not display the artwork on the other player. To get around this it is possible to embed the artwork in the music file itself so it always travels with the file. Artwork can be embedded by you or files from third party sources may arrive with embedded artwork. iTunes apparently now won't replace artwork for such files. You can accomplish this by completely deleting artwork for a file or set of files in Get Info, then getting iTunes to fetch artwork which will then be set as a reference file rather than being embedded.
I use an old iTunes so unless you are using an ancient iTunes it won't help for me to give you great details. To erase artwork I simply get info on a series of files and check the box next to the artwork box without adding any artwork and close. To do it for single file I Get Info, go to the artwork display tab and click delete. Here's a Windows reference for a newer iTunes (but the "old Get Info" reference is for early iTunes 12 and no longer works with newer):I cannot delete embedded album artwork in iTunes 12 -
Unable to update 5.0.1 or 6.0.1 Download spins indefinitely using OSX10.6.8
I have been unable to update the 2 latest versions of Firefox.
I'm using OSX 10.6.8
I get a warning that one of my add-ons (Contribute) is not compatible and will not appear on my menu bar.
Then the download scroll just spins and spins.If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
is the garageband, iPhoto,iMovie update free, as I have purchase mac book pro last december, I am unable to update it from app store. When I try to do so it says "To update this application, sign in to the account you used to purchase it"
I have apple ID but after signing into that account too, it does't allow to update. None of the updates for these application are show in software update of late, but it flashes in the dock where app store is . Kindly suggest.Should be the account you registered your mac with, and/or the account you used during the setup assistant.
-
Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
Unable to update a record using PAI, in Module pool
Hi Experts,
I m unable to update the records in to the table using P A I in module pool, could any one help me out dear.
The prg is as follows:
INCLUDE MZFIRSTPAGETOP . " global Data
TABLES: ZCHP_CUST_INFO.
DATA: CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
COMM like ZCHP_CUST_INFO-ADDRESS.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'FOR1000'.
SET TITLEBAR '1000'.
ENDMODULE. " STATUS_0100 OUTPUT
INCLUDE MZFIRSTPAGEO01 . " PBO-Modules *
INCLUDE MZFIRSTPAGEI01 . " PAI-Modules *
INCLUDE MZFIRSTPAGEF01 . " FORM-Routines *
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'SUBMIT'.
Updating the record.
ZCHP_CUST_INFO-REQ_NUM = C_KNUMV.
ZCHP_CUST_INFO-CREATED_BY = CNAME.
ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
ZCHP_CUST_INFO-SHORT_TEXT = DESC.
ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
ZCHP_CUST_INFO-ADDRESS = COMM.
INSERT ZCHP_CUST_INFO.
COMMIT WORK.
WHEN 'RESET'.
CLEAR: CNAME,REQTYP,PRIO_TYPE,
DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Thanks in advance,
SunilHi Kal chand,
This is the whole prg where the records are not updated. But the ref number is updated.
INCLUDE MZFIRSTPAGETOP . " global Data
TABLES: ZCHP_CUST_INFO.
DATA: OKCODE LIKE SY-UCOMM.
CONSTANTS: LC_NUMBER_RANGE TYPE INRI-NRRANGENR VALUE '01',
LC_COND_OBJECT TYPE INRI-OBJECT VALUE 'KONV'.
DATA: L_IS_REPL_DELIV TYPE XFLAG,
C_KNUMV TYPE I.
DATA: CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
COMM like ZCHP_CUST_INFO-ADDRESS.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'FOR1000'.
SET TITLEBAR '1000'.
ENDMODULE. " STATUS_0100 OUTPUT
INCLUDE MZFIRSTPAGEO01 . " PBO-Modules *
INCLUDE MZFIRSTPAGEI01 . " PAI-Modules *
INCLUDE MZFIRSTPAGEF01 . " FORM-Routines *
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'SUBMIT'.
*FOR INCREMENTING THE VALUE.
C_KNUMV = C_KNUMV + 1.
USED FM TO GENERATE NUMBERS.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = lc_number_range
object = lc_cond_object
IMPORTING
number = c_knumv.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Updating the record.
ZCHP_CUST_INFO-REQ_NUM = C_KNUMV.
ZCHP_CUST_INFO-CREATED_BY = CNAME.
ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
ZCHP_CUST_INFO-SHORT_TEXT = DESC.
ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
ZCHP_CUST_INFO-ADDRESS = COMM.
*ENDIF.
INSERT ZCHP_CUST_INFO.
COMMIT WORK.
WHEN 'RESET'.
CLEAR: CNAME,REQTYP,PRIO_TYPE,
DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
regards,
Sunil -
Unable to Update PO Customerdata tab at Item level using BAPI_PO_CHANGE
Dear Experts,
I am unable to Update PO customer tab data at item level using BAPI :BAPI_PO_CHANGE.
I am passing the data structure through EXTENSIONOUT is refered with BAPIPAREX structure.
Can any one help on this.
Best regards,
Venkata Siva.Hi Venkat,
Check this note 1033925.[Using Extension|Update EKKO table for the custom field through BAPI;
Regards,
Madhu.
Maybe you are looking for
-
No longer easy to use. No longer logical. You now have to trawl through all the files just in case you missed what youi were looking for. Simple alphabetical order is all that is required not this over engineered confusion.
-
Bug? 4.0 EA1 Can't select all in Script Output window
This seems to be a small bug. Open a worksheet and enter any query. Run as a script (F5) and the output appears in the Script Output window. Click in the Script Output window to give it focus and type Ctrl-A to select all the output. The text selecte
-
Awesome users report on your usage habits and favorite apps
So, I've been wondering what apps users of the awesome window manager are using. I'm trying to get used to the concept of a tiling window manager, but the graphical apps I'm used to look like crap. I've seen some really good looking screenshots of ti
-
error message when syncing to my computer: Itunes could not backup the ipod because the backup was corupt or not compatable with the ipod. delete the backup file for this ipod, then try again. Where is this file? This started after updating itunes an
-
Data flow using a WLAN controller
Can someone explain the flow of data from wireless client to some destination in the internal network (or the Internet) using a WLAN Controller? Use a 4402 as an example. Specifically, I am wondering if client traffic actually passes thru the WLAN Co