Unable to upgrade firmware after upgarde from 10.4.2- 10.4.4???

Hi All:
I have a single proc 1.8 Powermac that needs this update:
http://docs.info.apple.com/article.html?artnum=302212
I've had my G5 in storage for a little while and it was last running 10.4.2. First thing it did when connected to the web was to update me to 10.4.4. After this I noticed there was a firmware upgrade for the machine that will fix the problems I've been having with it.
Unfortunately, when I launch the installer it tells me that none of my volumes have the right OS version on them.
I've rebooted serveral times, reset the PRAM and finally the SMU and so far nothing's worked.
TIA!
-Todd
PowerMac G5 (late 2004) Mac OS X (10.4.4)

Looks like it's a bug and you'll need to contact Apple.
Have you done a System Profiler to get your Boot ROM Version?

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

E60 Unable to upgrade firmware (Product Code:05190...

Hello all,
I have just gotten an E60, but currently unable to upgrade the firmware. The NSU says that the phone is not supported.
Pressing the buttons (*#0000#) shows the following:
05w34.2
20-09-05
RM-49
And the product code of the phone is 0519047.
Please help as the phone is very very sluggish and crashes easily.
Thanks!

My problem MIGHT be solved !!! The file "FW_E2000_1.0.03.002_US_20100907_code.bin" i previous downloaded from the linksys download page "http://homesupport.cisco.com/en-us/wireless/linksys/E2000" was 0 bit.This may course the "Upgrade failure" problem !! But i got 5.16 M when downloading direct from the link "http://homedownloads.cisco.com/downloads/firmware/1224655367476/FW_E2000_1.0.03.002_US_20100907_code..." which was copied from the same page. I will give it a try later. Have a nice day !! SLo

HELP UNABLE TO UPGRADE FIRMWARE!!!!

Hi,
I have a Linksys WRT300N V1. I am unable to upgrade the firmware on it. It fails at about 10%. I really don't know why. Any help would be great. Thank you very much.
-=Bobby=-

Same issue, I have the linksys 300N V1.
Downloaded the latest firmware for V1.1 - WRT300N-v1.1_1.51.2_fw,0.bin (file name 3.6 MB)
And trying to upgrade results in a failure at 6 to 10% everytime? Is this because the V1.1 router is not the same as V1 and requires a different firmware?
Tech support has no idea, OMG!

Unable to Upgrade App After Changing Billing Address

Recently I have moved from USA to INDIA. Hence, I changed my billing address and updated credit card information associated with my apple id.
After that I am unable to get free upgrade for apps that I had purchased with my US credit card.
Can someone please help me with this issue?
Thanks & regards,
Pranav Raval

I too have the same problem: I changed my contact email. I was forcefully logged out by Azure. After logging back in it said it could not find my subscription and I no longer have any benefits. The support phone number Azure pointed me to pointed me to
this forum. How awesome to see the forum points me right back to online help that pointed me to the call center that pointed me here.
Chris

Unable to view catalog after migrating from OBIEE10g to 11g

Hi All
I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g.
Do I need to do something additional. Although I am able to login to repository.
Thanks..

Ideally it shud...can you try this tutorial with Sample or Paint objects ??
http://howtobi.wordpress.com/2011/01/14/upgrading-obiee-10g-content-to-11g/

ABAP Queries not available after upgarde from 4.6C to ECC 6.0

Hi All,
We have upgraded from 4.6C to ECC 6.0 version. There is some problem with the ABAP queries. The ABAP queries created in 4.6C were assigned to a Ztcode and now after the upgrade when we execute the Ztcode we are getting the error
that the program does not exist.
I tried to regenerate the code ( a new program name is generated) but there are differences in the selection screen (like the output format etc) between the two versions.
I looked into the relevant SAP notes also but could not find any solution.
Could any of you suggest any ideas to generate abap queries after upgrade?

hi,
Re: SAP version differences 4.5b, 4.6c and ECC6.0
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Hope this helps.
venkat.

Iphone 4 unable to extract picture after restoring from backup.

Hi all
i m currently using a iphone 4 and while before restoring i have done the back up and after restoring all 2500 pictures was gone and no way to extract. But making use of other third party software all picture was found but due to purchase software thus never make any purchase to retrieve all picture back.
can anyone help to resolve the problems above mention and seem like the jepg file has became a document file instead?

Hey there spam242,
It sounds like the restore process will not complete successfully and the phone will not boot up. I recommend starting by resetting the phone, then try restoring again.
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, then I would next put the phone into Recovery Mode and try again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Take care,
Sterling

Unable to upgrade adobe design premium from cs5.5 to cs6. Problem with eligibility of cs5.5 serial number

I upgraded from design premium cs5.5 to design premium cs6 and am unable to install. I get all the way to where it asks for the serial number of my prior product. Then it complains that the serial number dosent represent an eligible product. The install is on a new machine that has never had the adobe product installed. I unregistered the cs5.5 product on my old machine before trying to install cs0.

Contact serial number support by web chat.
Mylenium

Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

Upgrade Controller Firmware wizard reports the following error.
1 problem detected.
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
What does this mean? and how to fix it.

Hi,
yes 100% the error is reported from the dell mdsm software.
steps.
1. open mdsm application
2. right click on powervault md3600f
3. select upgrade raid controller module firmware
4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
5. error apears in the details window.
6. press view log.
[May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 1
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 0
[May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 1
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 0
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
Test passed
[May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
[May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
The event log was cleared within the last 24 hours (event type: 100).
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
Test passed
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

Unable to upgrade iPhoto after installing OS X

After successfully installing OS X i've been prompted to update iPhoto, however, when attempting to do so I receive the following message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". I have always used the same ID. Can you help explain how I can get this resolved as at the moment I cannot access the old version of iPhoto nor upgrade to the new version.

I have always used the same ID. Can you help explain how I can get this resolved as at the moment I cannot access the old version of iPhoto nor upgrade to the new version.
Have you upgraded to Yosemite from Mavericks or an earlier MacOS X version?
If your iPhoto'11 came preinstalled with Snowleopard, and has not yet been upgraded to App Store licences, by upgrading to Mavericks and iPhoto 9.5.1, then you probably have the problem, that the conversion of the licence for boxed, preinstalled iLife apps is not yet well supported in Yosemite. It should have been done with the upgrade to Mavericks, that you skipped.
If that is the problem, contact the App Store Support using the link given in Niel's post.
Only Apple Support can sort out Apple ID problems for pairing apps with AppleIDs. You will probably need redeem codes to be able to download the updates.

Unable to upgrade firmware - HP DreamScreen 100

I have updated the HP DreamScreen firmware to 1.6.1 and for the last few weeks I tried to update the firmware and received the following error: "Unable to confirm software version. Please check your network connection or try again later.".
I checked my my network connection and it is good. I am able to connect to SnapFish web site.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to upgrade firmware on LaserJet Pro MFP M127fw - HP Device Update cannot proceed

I just bought a new LaserJet Pro MFP M127fw and was trying to upgrade the firmware to the latest one posted on the support website of HP and the error I keep gettin is HP Device Update cannot proceed. Below is a screenshot
Everything is plugged in and I don't have any errors on the printer. Please help.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to open pdfs after downgrade from PS CC 2014

Greetings.
Our office has several seats of Creative Cloud, and our workstations are all Macs.
When InDesign and Photoshop upgrades to version 2014 were released, I installed them on our computers; only to discover that the upgrade is not compatible with OS X 10.6, so I had to downgrade - InDesign docs created in 2014 are not readable by InDesign CC.
Anyway, since then, I have one user who has followed the same procedure for some time, to create a pdf, which is as follows:
- Open an AutoCAD dwg file in AutoCAD (in Windows), and save as a PDF 'Drawing 1.pdf'
- Open PDF 'Drawing1.pdf' in Photoshop CC (in OS X 10.8.5)
- Add Layers, and add information (colouring in)
- Save PDF as a new PDF 'Drawing 2.pdf', saving the created Layers.
- Open PDF in Adobe Reader to print the PDF.
This used to work fine, however now the PDFs that have been modified will not open - claiming they are corrupt either with the error message: 'This is not a valid Portable Document File (PDF) document. It cannot be opened.' or 'Adobe Reader could not open 'Drawing2.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).'
Of course this means that all the work done has been lost, as the file was closed after saving.
I am not sure if the downgrade is the cause, but this is the only thing that has changed since the issue appeared.
The user has an iMac running 10.8.5.
Any help with this would be appreciated!
Cheers,
m

Hi MBP User,
Are you still facing this issue?
Have you tried to uninstall and reinstall. Is this issue reproducible on other machines, if you have around you.
Regards,
Ajlan Huda.

Unable to install Xcom after download from MAS

Since yesterday i try to install the game Xcom: Enemy unknown - Elite Edition from the Mac App Store (MAS).
The game downloads fine - wich takes close to 2h for the 13,5gb - and then the button switches to "installing" wich suddenly ends with "unknown error", please try again. and boy i've tried..
now it's the second day downloading this over and over again and i'm seriously pi**ed that i didn't use ferals online store but the MAS.
i hope someone has any hint what i can do?
what i already did:
1) deleted the file and tried again
2) deactivated "little snitch"
3) cleared the cache and tried again
4) cleared the temp cache and tired again
5) used onyx to clear the system, cleaned the app store cache, rebooted and treid again
6) set up a new user and tried again
all in all nothing worked for me. and after 5x times downloading (thats 10hrs!) i'm seeking for wisdom that goes beyond my google skills.
any help appreciated.
thanks,
robotobi

Hey,
The exact same thing happened to me. App store support was very nice- but never figured out what was causing the issue. Luckily im on vacation now and could use my mom's mbp to download the game and then transfer it to my computer but it was super frustrating. My biggest problem is now most of my large app store downloads are behaving this way and i don't know how to fix it and neither does apple- makes me want to buy games from steam instead.
If you ever figure out what the problem was please let me know- ill do the same

Unable to upgrade firmware after upgarde from 10.4.2- 10.4.4???

Similar Messages

Maybe you are looking for