Unable to upgrade firmware on Nokia 6280

I got the message "Device is not supported". Please, any one.
Message Edited by Arrowhill on 02-Nov-2009 11:27 PM

Uninstall the version of NSU that you have currently, and install the one from this link:
http://nds1.nokia.com/files/support/global/phones/software/NokiaSoftwareUpdaterSetup_en.exe
I guess it supports 6280. If you still get the error, take it to a Nokia Care Point to update the firmware.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Similar Messages

HELP UNABLE TO UPGRADE FIRMWARE!!!!

Hi,
I have a Linksys WRT300N V1. I am unable to upgrade the firmware on it. It fails at about 10%. I really don't know why. Any help would be great. Thank you very much.
-=Bobby=-

Same issue, I have the linksys 300N V1.
Downloaded the latest firmware for V1.1 - WRT300N-v1.1_1.51.2_fw,0.bin (file name 3.6 MB)
And trying to upgrade results in a failure at 6 to 10% everytime? Is this because the V1.1 router is not the same as V1 and requires a different firmware?
Tech support has no idea, OMG!

E60 Unable to upgrade firmware (Product Code:05190...

Hello all,
I have just gotten an E60, but currently unable to upgrade the firmware. The NSU says that the phone is not supported.
Pressing the buttons (*#0000#) shows the following:
05w34.2
20-09-05
RM-49
And the product code of the phone is 0519047.
Please help as the phone is very very sluggish and crashes easily.
Thanks!

My problem MIGHT be solved !!! The file "FW_E2000_1.0.03.002_US_20100907_code.bin" i previous downloaded from the linksys download page "http://homesupport.cisco.com/en-us/wireless/linksys/E2000" was 0 bit.This may course the "Upgrade failure" problem !! But i got 5.16 M when downloading direct from the link "http://homedownloads.cisco.com/downloads/firmware/1224655367476/FW_E2000_1.0.03.002_US_20100907_code..." which was copied from the same page. I will give it a try later. Have a nice day !! SLo

Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

Upgrade Controller Firmware wizard reports the following error.
1 problem detected.
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
What does this mean? and how to fix it.

Hi,
yes 100% the error is reported from the dell mdsm software.
steps.
1. open mdsm application
2. right click on powervault md3600f
3. select upgrade raid controller module firmware
4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
5. error apears in the details window.
6. press view log.
[May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 1
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 0
[May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 1
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 0
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
Test passed
[May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
[May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
The event log was cleared within the last 24 hours (event type: 100).
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
Test passed
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

Unable to upgrade firmware after upgarde from 10.4.2- 10.4.4???

Hi All:
I have a single proc 1.8 Powermac that needs this update:
http://docs.info.apple.com/article.html?artnum=302212
I've had my G5 in storage for a little while and it was last running 10.4.2. First thing it did when connected to the web was to update me to 10.4.4. After this I noticed there was a firmware upgrade for the machine that will fix the problems I've been having with it.
Unfortunately, when I launch the installer it tells me that none of my volumes have the right OS version on them.
I've rebooted serveral times, reset the PRAM and finally the SMU and so far nothing's worked.
TIA!
-Todd
PowerMac G5 (late 2004) Mac OS X (10.4.4)

Looks like it's a bug and you'll need to contact Apple.
Have you done a System Profiler to get your Boot ROM Version?

Unable to upgrade firmware - HP DreamScreen 100

I have updated the HP DreamScreen firmware to 1.6.1 and for the last few weeks I tried to update the firmware and received the following error: "Unable to confirm software version. Please check your network connection or try again later.".
I checked my my network connection and it is good. I am able to connect to SnapFish web site.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to upgrade firmware on LaserJet Pro MFP M127fw - HP Device Update cannot proceed

I just bought a new LaserJet Pro MFP M127fw and was trying to upgrade the firmware to the latest one posted on the support website of HP and the error I keep gettin is HP Device Update cannot proceed. Below is a screenshot
Everything is plugged in and I don't have any errors on the printer. Please help.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Nokia 6280 Software Updater

Hi, this is my fist topic, so sorry if I'll say something wrong. I read about 5.x firmware for Nokia 6280 phone, but I can't find this firmware on the update page. My phone has firmware version 3.40. Tnk's Andrea

Hi,
I have 5.92 on my phone. You'll need to take it to a nokia centre to get upgraded, until they can do it with the updater program that is. Presumably that won't be too long, the 6270 is listed now.
Incidentally, 5.92 seems a lot better than the other firmware. Though is by no means perfect, mine has been fine for a while and now refuses to turn on. Luckily, I'm geting a new contract starting tomorrow so get a new phone.

Firmware upgrade for Nokia 6280

I would like to know do we have firmware upgrade for Nokia 6280 as my present one is 3.65 and would like to upgrade it to 5.92 and I am in India
Could you please help me out.

updating to new firmware depends on product code which represents your region of purchasing, language pack and if it's branded or not .... so NOKIA releases firmwares and release it for every product code depending on mentioned points
you can check for updates @ :
http://mea.nokia.com/support/download-software/device-software-update/can-i-update
To find what the latest available device software is, you’ll need your device’s product code. The code is printed on the white label beneath the battery (e.g. CODE: 0520001).
if your phone is branded with an operator, that means that you should go to the operator care center and ask them, not NOKIA
some updates delay in some countries variant product code, as it requires more effort to add language pack to it like "example. China Japan Korea" or it needs the country to approve it due to its policy
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Unable to send message Nokia 6280

Dear friends
My phone is a nokia 6280, it is connected via bluetooth through Nokia Pc suite and I am able to synchronise it, exchange files but when I try to send a message appears : "unable to send a message" I freed the memory, but still does not want to send messages, I am using the old version of nokia PC suite and the Microsoft bluetooth stack.
Shall I upgrade to the last version (PC suite april 2007), it is really compatible?
thank you for any piece of info

soft reset *#7370#
Backup data first.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Unable to upgrade EFI Firmware on MacBook Pro

I am unable to upgrade the firmware on my 15" MacBook Pro for some reason ... my current version is MBP11.0055.B03. I have downloaded the new firmware and followed the instructions ... yet, when I run the MacBook Pro EFI Firmware Update utility and click Shut Down to install it and start the process, it pops up with the error "An unexpected error occurred (0). Your firmware cannot be updated." .... I've never had this kind of trouble updating firmware before.....
I have trashed the utility and downloaded it again, but I get the same results ... I have also repaired the disk permissions ... still no change. Any ideas??
MacBook Pro 2.16GHz/2GB RAM/100GB 7200rpm HD Mac OS X (10.4.8)

I have the same issue. Console log shows the following:
Mac OS X Version 10.4.8 (Build 8L2127)
2006-11-14 12:39:53 -0800
2006-11-14 12:39:54.311 SystemUIServer[218] lang is:en
2006-11-14 12:40:07.655 MacBook Pro EFI Firmware Update[229] MacBook Pro EFI Firmware Update version 1.2
2006-11-14 12:40:07.658 MacBook Pro EFI Firmware Update[229] No AppleEFINVRAM
2006-11-14 12:40:13.261 MacBook Pro EFI Firmware Update[229] GetRootAccess success
Nov 14 12:40:13 CB-MBP authexec: executing /usr/sbin/bless
preallocation of ///System/Library/CoreServices/com.apple.bless.firmware//LOCKEDMBP11_005508B.fd failed
Could not create ///System/Library/CoreServices/com.apple.bless.firmware//LOCKEDMBP11_005508B.fd
Error while writing firmware updater for EFI
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] pid 0xea, status 0x300
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] NORMAL EXIT 0x3
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] An error 0x3 was returned from /usr/sbin/bless.
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] bResult 0x0 Status 0x3 returned from CallAEWP bless
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:3
2006-11-14 12:40:13.632 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:3
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:21
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:21
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] EFIUpdaterController::showError:1
2006-11-14 12:40:14.829 MacBook Pro EFI Firmware Update[229] CommonUpdaterController::showError:1
A file /System/Library/CoreServices/com.apple.bless.firmware/LOCKEDMBP11_0055_08B.fdLOCKED_MBP11_005508B.fd exists but is size 0.
Disk and permissions verified OK. Also failed to install when logged in as root. Any help appreciated.

Nokia 6280 soft upgrade

I tried to upgrade the soft that is on my Nokia 6280, I looked http://europe.nokia.com/A4176089?6280/8
but I can't see nokia 6280
there is nokia 6270 and nokia 6288 but no nokia 6280
where can I get the upgrade?Message Edited by cinek2 on 01-Jul-200711:12 PM

I didn't write to them about it..... I wrote about the not working panel but after not getting a reply since 29th I thought I ain't gonna waist my time asking for support as they can't even be bothered to reply :@:@:@:@ VERY BAD EMAIL SUPPORT!!!!
I mean this is nokia = not some LG = I know a few ppl that have LG n they don't have any probs....a lot of ppl r complaining about "NOKIA" and their support
well anyway looks like I should change my phone so samsung or sony... or get the iPhone (TOP PHONE!!!!!!!!! ) I know I'm advertising others but nokia is not worth it.... it's - if everything works at first = then you are lucky - but when something doesn't work then wooooooww give the damn phone back coz nokia doesn't care about it.....
btw did u write to nokia about this?Message Edited by cinek2 on 02-Jul-200703:49 PM

Nokia 6280 Firmware versions.

Just wondering what version of the 6280 firmware T-Mobile users have? Whould be interesting as it appears they have the PTT option available, which is not available in my firmware
Nokia 6280
V03.60
10-02-06
RM-78

I am not sure what the latest firmware is, but do not update to V6.10 using the Nokia Software Updater. It will brick your phone.

Nokia 6280 problems (resetting), especially on '3'...

As per the request of a moderator (Karim) at the end of a different thread about the Nokia 6280, I am beginning a new thread here about the Nokia 6280 and problems people are encountering with it.
I was upgraded by my network operator '3' onto the Nokia 6280 phone, which arrived on Thursday 9th February 2006. This is a '3-branded' variant of the standard Nokia 6280, with a 3 logo on the front and back, and some 3-specific features in the software.
The phone looks great, and there are many good things about it, but there are some very weird bugs in the software:
- The phone often resets itself (goes black, fast restarts) when changing profiles e.g. from 'General' to 'Silent'
- When trying to change tones, the system seems to 'hang' after which no sound is produced from the phone OS (e.g. button presses, tone noises) until a hard reset is done
- Various other bugs (not discovered by me, but mentioned by others in the previous thread) including text messages being interrupted half-way through, PIN request not being actioned even though activated, and media player issues.
My phone revision information is as follows:
Nokia 6280
V 03.36
05-12-05
RM-78
(c) Nokia
Language:
V 03.36
05-12-05
RM-78
(c) Nokia
C
I am wondering about the following:
- Does this phone support firmware updating?
- If so, will Nokia provide a standard firmware update, or as my phone is a '3-variant' will I have to rely on 3 putting out a firmware update
- Has anybody got any suggestions of how to proceed with this - I am within my 7 day return period, so could return it, but then I'd be without a phone and I'd prefer to keep the phone and have it fixed!
Anyone else with these issues, please join the thread, for clarity I suggest people include what network their phone is on, and the firmware revision of the phone. This can be discovered by tapping *#0000# on their phone.
Thanks
Floop

Hi,
I upgraded my phone from 6630 to 6280 with 3 Network, three weeks ago. This is my third phone, and it's the same problem all over. After I transfer all my contacts and pictures etc via bluetooth, I tend to have a play around getting use to the new phone and without any warning the phone would just switch off. It would never switch on again. I tried recharging and leaving it overnight, nothing. Exactly the same thing happen to phone no.2 and no.3. Always when I just finished transferring contact details and pictures. I can't get it to switch on again. I am in the process of returning the 3rd 6280. I think I wouldn't bother with it.
I originally asked for N70, and 3 keep telling me that they don't have it in stock. The other options they have given me are Motorola V3X and LG 8330 which I'm not keen on really as I would prefer a Nokia phone.
Is this a known fault with 6280?. I will keep pressing 3 to give me the N70 or else. I am to the point of not bothering and just keep with my 6630.
Has anyone had the same problem?

Upgrade firmware of n73.

How can i create playlist of video song for real player of n73. No option to create playlist or tracklis in real player n73 (like n80 real player). If the problem solve with firmware upgrade then please help me, How can i upgrade firmware of n73.

aj4036: i tried too but couldnt figure out how to create a video playlist... i dont think it has been implemented in the next firmware either...
you can update your firmware by taking your phone to your nearest Nokia Service Center or waiting for the N73 to be supported by the Nokia Software Updater

Unable to upgrade firmware on Nokia 6280

Similar Messages

Maybe you are looking for