Unable to upgrade java components through JSPM tool for ECC 6.0 system

Hello All,
We are upgrading JAVA components to SP-STACK 12 for our system GD0(ECC
6.0 TWS ),and we were struck in the middle(only few components have been  deployed and for others it is throwing error).
The error it throws from /SDM/program/log/ is
"Cannot login to the SAP J2EE Engine using user and password as providedin the Filesystem Secure Store. Enter valid login information in the
Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more
information, see SAP note 701654."
And for this I followed note#701654 and updated the password of admin in Filesystem Secure Store and restarted the J2ee server ,even after doing
all this steps also still we are facing the same problem.
Currently when I try to login into J2ee engine through URL
:(<host>:<port>) it displays "Application you have requested is stoped",and when I check throw jcmon all three were under running
status(dispatcher,server0,sdm)
Kindly advise me on this..as I am struck in halfway..
Best Regards
Raki

Hello Nirmal,
Thanks for Update,
I tried again by changing the password through configtool "secure store" and then I restarted j2ee_engine also .Even though i am getting the same error while applying through SDM tool & JSPM tool also.
This is error log it shows in SDM tool screen at the time of deployment.
===========================================================================
Deployment started Thu Sep 13 13:15:22 BST 2007
===========================================================================
Starting Deployment of DocumentServicesLicenseManager
Aborted: development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'710.20060929113452.336248'/'2', grouped by software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.12.0.20070507083121''/'2':Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
Deployment of DocumentServicesLicenseManager finished with Error (Duration 4108 ms)
Starting Deployment of ADSSAP
Aborted: software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.12.0.20070507083121''/'2':Failed deployment of SDAs:development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'710.20060929113452.336248'/'2' : abortedPlease, look at error logs above for more information!
Deployment of ADSSAP finished with Error (Duration 1549 ms)
Can you kindly update me  ASAP, to fix this problem..
Thanks one and all for helping me.
Best Regards
Raki

Similar Messages

  • Has SAP released Web Tools for a 64 bit system?

    Has SAP released Web Tools for a 64 bit system? It was my understanding earlier in the year that SAP would be releasing WebTools in the 3rd quarter 2008 for a 64 bit system. Does anyone know the status of this release? Thank you, Vicki Merritt

    We have a test build that enables 32-bit emulation of the synch manager and synch service, but not for the website.
    FP1 is tentatively scheduled to go into rampup in November, and we are still investigating how to get the website to run in 64-bit environment.
    This test build of the Synch Manager doesn't show the B1 db version but we have successfully synchronized our test company databases with it and so far no major issues.
    You can contact me if you would like to give it a try.

  • Calling JAVA components through BPEL?

    How can BPEL call JAVA components? If there any different adapter ??
    Pls respond...thanks in advance.

    Hi,
    there are two ways:
    generate a webservice from your java component
    http://download-east.oracle.com/docs/cd/B31017_01/web.1013/b28974/devjavaclass.htm#BHCEGEJA
    or
    embed your java into the bpel
    http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/java.htm#sthref1282

  • Data Transfer Tool for ECC 6.0

    Hi All,
         Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
    Please Advise.
    Kind Regards,
    Daniel A. La Mendola

    I am actually looking for where the program resides and if it exists for ECC 6.0.  I have found tons of documentation, but nothing on how to obtain the tool itself.
    If anybody can assist me in the endeavor it would be greatly appreciated.
    Thanks again for you help

  • Is Dreamweaver an appropriate tool for creating a Help system?

    Hi,
    I have the full Adobe Creative Suite and I'm looking to create a Help system. Is Dreamweaver an appropriate tool for this, or is there another tool that would be better? I don't have Robohelp.
    Robyn

    Hi Robyn
    Robohelp and most of the other help systems would be like splitting a nut with a sledgehammer, for what you describe.
    You are basically talking about a search system on specific topics, for which Dreamweaver is an adequate tool, it may be worth while incorporating one of the 'smaller' open source help system into your site, in order to achieve your goal.
    Your comment on posting to the 'indesign' forum is understandable but not recommenced (there is a great difference between dtp (classic graphic design) and web design / development), especially if you intend to incorporate your current 'user guide' into a web site. Any help system both for a program that you install on your computer or supply as a web site 'help' system can be constructed as a searchable html page (many are html pages now), and you can even use the a major search engine to do this for you, (providing you know how, of course). It is even possible to search pdf's, flash and audio, and provide then as a downloadable / online version as well if you so require.
    The one thing you did not say in your reply was how good your programming skills are, (if not very good, do you have someone who can do this for you), as this is what will limit your help / search system. But even here if you incorporate one of the search engines own search api into a basic web page they will index and search your site for you, both as a local search, and as a web search.
    Hope this helps, in some way.
    PZ

  • Unable to upgrade plug-in and/or QT for Windows

    When I try to upgrade, I get the following pop-up:
    The older version of Apple Software Update cannot be removed. Contact your technical support group.
    Any ideas on how to fix this so I can update my browsers that they may work correctly again.

    When I try to upgrade, I get the following pop-up:
    The older version of Apple Software Update cannot be removed. Contact your technical support group.
    Any ideas on how to fix this so I can update my browsers that they may work correctly again.

  • Problem Upgrading Kernel to he Current Level for ECC 6 V5R4M0 OS/400

    Hello,
    I am having problem upgrading my ECC 6.0 kernel to the current level (236), the steps I have done is
    1) downloaded and copied following kernel fix to tmp folder under rootbin.
    APYR3FIX.SAR,APYSAP.SAR,LODSAPKRN.SAR
    2) Apply the above fix using following command
    - APYR3FIX SID(SID) SAVF(R3FIX700U/APYR3FIX) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
    - APYR3FIX SID(SID) SAVF(R3FIX700U/APYSAP) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
    - APYR3FIX SID(SID) SAVF(R3FIX700U/LODSAPKRN) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
    Started applying new kernel
    1) Copy sapexe.sar and sapexedb.sar into tmp folder i.e kern under rootbin.
    2) created one file using notepad called parts ( w/o extension)
    parts file having following content.
    SAPEXE.SAR,
    SAPEXEDB.SAR,
    3) copied parts file into tmp folder.
    4) Create new kernel library like SAPSIDUKRN using following command.
    - CRTLIB LIB(SAPSIDUKRN)
    5) Apply latest kernel to newly created kernel library using following command.
    - LODSAPKRN DEV(STMF) MNTPNT('/tmp') KRNLIB(SAPSIDUKRN) USERDEF(YES) LIST('/tmp/parts')
    When i run the command it says successfully completed, but no files are present in the newly created kernel. please guide me on how to proceed with this.
    Thank You

    Hi Vijay,
    From reading your description I wonder if you simply mixed up directory names. In step 1) of the kernel load you mentioned directory kernel below rootbin. In the command you reference directory /tmp. Although LODSAPKRN should complain if any of the given objects is missing it might worth checking.
    However, did you recognize there is a new option USERDEF(FLAT) available with the latest version (246) of LODSAKRN? This option is supposed to allow standard SAPEXE+SAPEXEDB packages being imported without having to provide the parts file. Check note 912575 if you are interested - english version should be getting updated today.
    Regards,
    Thomas

  • I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

    I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

    http://www.apple.com/osx/specs/

  • Unable to install java app in 6500c through pc sui...

    handset: 6500c upgraded to latest firmware v08.30
    pcsuite: on xp upgraded to latest version verson 7.0.8.2
    issue: coundn't install java app through pc suite application installer, but wap donwload installation is ok. When connected, I couldn't see installed java app in pc suite application manager. It used to work, but not any more after I upgrade both firmware and pc suite together. Other functions work just fine.
    error message: operation failed when use app installer. file size too big when use drag and drop in pc suite.
    I'm sure I have enough memory in handset.
    I sent my handset back to Nokia customer support center. Their response is "it might be a bug in latest firmware". That's it.
    Any suggestion or comment?

    Hi all:
    My 6500C is a generic phone, not customized by service provider.  I used software updater yesterday.  The latest version is of my phone is still 08.30.
    I check
    http://mea.nokia.com/get-support-and-software-en/download-software/device-software-update/can-i-upda...
    and find the latest version of my CODE is still 08.30.
    Look like I got a phone that is not supported right now.  Need to wait longer.  Don't get it.

  • Unable to start java tools - Error : Environment variable JAVA_HOME not set

    hi all,
    I am not able to start the java tool - Visual Admin, Configtool, etc in the solaris Bash shell.
    I was given authorizations on solaris and i'm able to view the logs and browse in solaris boxes,
    But, when i try to start Visual Admin, it says" ERROR environment variable JAVA_HOME not set "
    Since,my colleagues are using this tool for years, how come the environment variable is not set only for my user profile ?
    Is it like the environment variable has to set seperately for every user profile ?
    Do i need to set it initially for my profile eventhough it is working for others ?
    i am confused..please help.
    Addy

    Nicholls, Thanks for your quick reply.
    Ofcourse, I use my login ID to use java tools and they use their's obviously.I don't use <SID>adm.
    We WRQ reflection for X-Windows and Putty for Command line Solaris Access.
    When i try to use VA through the X-Window tool WRQ reflection, I am not able to start the tool.
    My doubt here is, Do we need to setup the environment variable for every new user initially for the first time ? ( I am a new user for this environment )
    Supposing if i need to setup the environment variable, do i need to set it up for the all the Solaris Boxes i use ?
    I am able to browse through the files.when i try to start the VA by giving ./go i am not able to start it up.
    Appreciate your time and valuable replies.
    Addy

  • Unable to launch the application after upgrading Java to version 1.6.0_26

    After upgrading Java to version 1.6.0_26 in Windows XP my web start throwing Exception. It works fine in Ubuntu with Java 1.6.0_24 and in Windows with older versions of Java 1.6.
    Exception doesn't say anything:
    java.lang.NullPointerException
           at com.sun.javaws.Launcher.executeApplication(Unknown Source)
           at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
           at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
           at com.sun.javaws.Launcher.run(Unknown Source)
           at java.lang.Thread.run(Unknown Source)Same as java console ouput
    Java Web Start 1.6.0_26
    Using JRE version 1.6.0_26-b03 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\esod
    c:   clear console window
    f:   finalize objects on finalization queue
    g:   garbage collect
    h:   display this help message
    m:   print memory usage
    o:   trigger logging
    p:   reload proxy configuration
    q:   hide console
    r:   reload policy configuration
    s:   dump system and deployment properties
    t:   dump thread list
    v:   dump thread stack
    0-5: set trace level to <n>
    #### Java Web Start Error:
    #### nullMy Jnlp file looks like this
    <jnlp spec="1.0+">
    <information>
       <title>Editor</title>
       <vendor>Comapny name</vendor>
       <homepage href="http://company_urll" />
       <description>Editor/description>
    </information>
    <resources>
       <j2se version="1.6+" />
       <property value="true" name="javaws.cfg.jauthenticator" />
       <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" />
    </resources>
    <security>
       <all-permissions />
    </security>
    <application-desc main-class="pl.rdata.formeditor.FormEditor">
       <argument>[email protected]</argument>
       <argument>rLq3347491</argument>
       <argument>17</argument>
       <argument>
       http://192.168.79.33:7070/formeditor/formManagerService.service</argument>
       <argument>
       http://192.168.79.33:7070/formeditor/customDataTypeManager.service</argument>
       <argument>
       http://192.168.79.33:7070/formeditor/authorizationService.service</argument>
       <argument>2</argument>
    </application-desc>
    </jnlp>This application is self signed.
    When I download jar file to disk I can run it with command java -jar and it works fine.
    After downloading jar I made some tests changing line <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" /> in Jnlp file.
    When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.
    When I changed it to <jar href="file:///C:/formeditor.jar"> it is not working (same exception).
    In every case jar is download correctly and it pass verifying.
    can anyone help?
    Regards
    Michal

    867322 wrote:
    When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.Okay, so you at least have a workaround.
    can anyone help?Search the bugs database to see if someone else already reported this; if not create a new bug entry. Whatever mistake you could make, you should not be getting a NullPointerException as a result so this is at the very least a bug in the error handling of webstart.
    But just some observations to try and see if you can make a difference (which is added input for your bug report). If I check JNLP examples, I see that the url specified is usually without a protocol, so it could be like this:
    <jar href="/resources/applet/formeditor.jar" />The JNLP should be on the host that you service the jar from, so Webstart can fill in the host information for itself.
    Also you provide a main-class; if the jar manifest specifies a main-class (and it should) you don't need to specify it in your JNLP file.

  • Unable to Connect java through LCDS

    Hi,
    I want to connect to java classes through LCDS. I am using flash builder 4, Eclipse Ganymade, Tomcat server.
    Error Looks like this
    [LCDS]Deserializing AMF/HTTP request
    Version: 3
      (Message #0 targetURI=null, responseURI=/2)
        (Array #0)
          [0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
            operation = "authenticateUser"
            source = null
            clientId = null
            timeToLive = 0
            timestamp = 0
            headers = (Object #1)
              DSEndpoint = null
              DSId = "671AE2EC-CA0C-B16A-27D9-587F05B8F1A1"
            messageId = "90B2CF64-5275-B21D-7185-D9A14E00DB0B"
            destination = "TestService"
            body = (Array #2)
              [0] = "administrator"
              [1] = "password"
    <<<<<<<<<<Entering authenticateUser:UserManagementService>>>>>>>>>administrator:
    ::::password
    com.adobe.idp.um.api.UMException| [com.adobe.livecycle.usermanager.client.Authen
    ticationManagerServiceClient] errorCode:16385 errorCodeHEX:0x4001 message:Error
    wrapped in DSCException : TRACE
            at com.adobe.livecycle.usermanager.client.ManagerServiceClient.throwErro
    rAsUMException(ManagerServiceClient.java:57)
            at com.adobe.livecycle.usermanager.client.ManagerServiceClient.handleExc
    eption(ManagerServiceClient.java:92)
            at com.adobe.livecycle.usermanager.client.AuthenticationManagerServiceCl
    ient.authenticate(AuthenticationManagerServiceClient.java:113)
            at com.adobe.solutions.ffa.util.UserManagementUtil.validateUser(UserMana
    gementUtil.java:19)
            at com.adobe.solutions.ffa.service.UserManagementService.authenticateUse
    r(UserManagementService.java:10)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
            at java.lang.reflect.Method.invoke(Unknown Source)
            at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdap
    ter.java:421)
            at flex.messaging.services.RemotingService.serviceMessage(RemotingServic
    e.java:183)
            at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java
    :1400)
            at flex.messaging.AsyncMessageBroker.routeMessageToService(AsyncMessageB
    roker.java:571)
            at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndp
    oint.java:1005)
            at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBroker
    Filter.java:103)
            at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:15
    8)
            at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:
    44)
            at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFi
    lter.java:67)
            at flex.messaging.endpoints.amf.SerializationFilter.invoke(Serialization
    Filter.java:165)
            at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.ja
    va:293)
            at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java
    :352)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:290)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
    ilterChain.java:206)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
    alve.java:233)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
    alve.java:191)
            at flex.messaging.security.TomcatValve.invoke(TomcatValve.java:151)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
    ava:128)
            at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
    ava:102)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
    ve.java:109)
            at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
    a:293)
            at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
    :849)
            at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
    ss(Http11Protocol.java:583)
            at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:45
    4)
            at java.lang.Thread.run(Unknown Source)
    error: Error wrapped in DSCException : TRACE[LCDS]Adapter 'java-object' called '
    com.adobe.solutions.ffa.service.UserManagementService.authenticateUser(java.util
    .Arrays$ArrayList (Collection size:2)
      [0] = administrator
      [1] = password
    [LCDS]Result: 'true'
    [LCDS]Serializing AMF/HTTP response
    Version: 3
      (Message #0 targetURI=/2/onResult, responseURI=)
        (Externalizable Object #0 'DSK')
          true
    1.262076645285E12
    (Byte Array #1, Length 16)
    (Byte Array #2, Length 16)
    (Byte Array #3, Length 16)
    Plz help me in fixing this issue....
    With regards,
    yashu

    maybe if you asked nicely instead of ordering people around we might tell you.
    As it is all you're going to hear is that you don't need both those jars, as they contain different versions of the same driver.
    I'm not going to tell you which you need, as you should have the documentation to tell you that. But then you also should have the documentation to tell you how to set your classpath properly and you failed to read that too.

  • Unable to deploy BI java components

    I am trying to deploy BI components on WAS-java. I get following error when trying to deploy files. Any clue?
    Its using space in path between SAP and AG(/BI_MMR/SAP AG/1000.xxx). We are on Solaris. Any suggestions?
    Info: Loading archive '/Install_CD/Components1/DVD_NW_04_SR1_NetWeaver_Component
    s/BW/BW-UDI/OFFLINE/BIMMR09_0.sca'
    Error: Caught IOException while copying file to target location: java.io.FileNot
    FoundException: /usr/sap/EP1/JC00/SDM/root/origin_sc/sap.com/BI_MMR/SAP AG/1000.
    350.0.9.0.20041026073434/BIMMR09_0.sca (No such file or directory)
    Error: java.io.FileNotFoundException: /usr/sap/EP1/JC00/SDM/root/origin_sc/sap.com/BI_MMR/SAP AG/1000.350.0.9.0. 20041026073434/BIMMR09_0.sca (No such file or directory)
    Error: Error while loading selected archives.
    Message was edited by: RG
    Message was edited by: RG

    As well as the other doc on http://www.oracle.com/technetwork/middleware/bi-foundation/documentation/bi-pub-096318.html
    Oracle® Business Intelligence PublisherCertification Information
    10g Release 3 (10.1.3.4.1)
    E12692-06
    Table 1 lists the Oracle Business Intelligence Publisher support information for the components required to run the BI Publisher server.
    In general, Oracle Business Intelligence Publisher server can be run in any J2EE application server that supports Java 5.0 (JDK 1.5) or Java 6.0 (JDK 1.6). Java application servers support a wide range of operating systems, processors and bus architectures. Please refer to the support and certification documentation of the J2EE application server vendor to determine which platforms and processor architectures are supported.

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • Unable to upgrade the SAP Basis 701

    Hi Experts
    I am planning to Upgrade Solman 7.0 to Solman 7.0 Ehp1, for that i need to upgrade my basis support pack from 700 to 701.
    I have downloaded the SAP_BASIS 701 SAPK-701DHINSAPBASIS  support pack from service market place. When i try to update this using saint i am getting a error saying "OCS package SAPK-701DHINSAPBASIS does not match the current software component vector" and showing the "
    BBPCRM,* Component BBPCRM,* must not be installed "
    When i check the prequest
    Main Components
    Component Release Value
    BBPCRM         *         F
    SAP_BASIS  700        T
    Already i have installed BBPCRM,
    BBPCRM     500     0011     SAPKU50011     BBPCRM     BBP/CRM Supp. Pack.
    Please help resolve this issue
    Thanks & Regards

    Hi, you can use this roadmap I've made for upgrading to EHP1 from SP17 or lower. Please remark that its a prerquisite that Your java stack is on SP17 (solman SP17 = NW Java sps16). Also, You should include SP04/SP20 for Solman while upgrading via SAINT (ABAp Wise) and JSPM (JAVA wise).
    BR Kurt
    *Pre upgrade 1 *
    Make a complete offline backup of Your whole system (DB + files)
    Pre upgrade 2
    release workbench/customizing request:
    Pre upgrade 3
    Lock all users exept from system users and exclusive users
    - In TC=su10 click on "Authorization data"
    - Scroll down and in "Additional selection criteria" check the "Locked users only" box
    - Click on "Execute" (F8)
    - Make at note of the locked users
    - Go one step back, and click on "Authorization data" once again
    - Scroll down and in "Additional selection criteria" check the "Unlocked users only" box
    - Click on "Execute" (F8)
    - Select all users by clicking the green icon in upper left corner
    - Deselect the system users and own user:
    - Click on "Transfer" in upper left corner
    - Click on "Lock" icon
    Pre upgrade 4
    Check system (transport tool, ST22, SM21, SM13, SM50)
    - In STMS run the check TP tool
    - Look for ABAP dump in ST22
    - Look for errors in SM21
    - Look for update errors in SM13
    Pre upgrade 5
    - Extending datafiles/tablespace in database manually if needed
    Pre upgrade 6
    Setting all jobs to scheduled during the upgrade phase
    In productive client , tc=SE38, run the program "BTCTRNS1".
    This will take all currently Scheduled and Released jobs and move them into a "special" status
    Upgrade part 1
    Upgrade the Java stack + kernel to Solution Manager SPS17 (NW sps16) if not already upgraded.
    - Logon to with OS user <sapsid>adm
    - Open JSPM by db.clicking the go.bat file in the directory:
    usr\sap\<SAPSID>\DVEBMGS<instance>\j2ee\JSPM
    - Logon to JSPM (SDM) using the same password as J2EE_ADMIN
    - Choose "deploy SPS stack"
    - Follow the guidelines from JSPM
    Remark:
    First the JSPM application is updated, which requires restart of the JSPM
    second: The kernel files is updated, which requires restart of the SAP system
    Third: all other Java packages is deployed, which requires restart of the Java Engine cluster a couple of times during that phase - all controlled by the JSPM application + manual interaction via the Cluster administrator (stop/start of clusterressources).
    During use of JSPM, refer to Note 891983 - JSPM: Central SAP Note SAP NetWeaver 2004s AS Java regarding troubleshooting if needed
    Upgrade part 2
    Upgrade SPAM to latest version 03x
    - Login to client 000 with user (SAP_ALL, SAP_NEW) u2013 not SAP* and DDIC
    - tc=SPAM
    - Choose "Support Package", "Load packages", "from application server"
    - Choose "Support package", "Import SPAM/SAINT_Update" and follow the guidelines
    - Confirm after deploying the supportpackage
    Upgrade part 3
    Upgrade product definitions in Solution manager according to note 1169247
    - tc=SE30
    - Run the report: RS_SMSY_PPMS_XML_UP_DOWNLOAD
    - Set checkmark with an uppercase "X" in option field: "Upload"
    - Point to the downloaded .XML file
    - Click "ok"
    Upgrade part 4
    Adding .DLL files to support NW7.01 use of Visual Studio 2005 Compiler According to note 684106
    - on SAP servers execute downloaded vcredist_x64.exe file from directory:
    - on SAP servers copy file: dbghelp.dll. to the directories:C:
    windows\system32 and C:
    windows\syswow64 on all SAP servers
    Note,  check before copying dbghelp.dll whether the relevant file exists in the directories \windows\system32 and \windows\syswow64, and replace the file only if the version that is made available here is more current than the version that is already available. You can use the Windows Explorer to determine the file version (right-click and choose "Properties -> Version").
    Upgrade part 5
    Upgrade to SAP kernel 7.01, kernel 55
    - Logon to the SAP server
    - Stop SAP instances via the MMC console
    - Navigate to Kernel directory:
    usr\sapmnt\<SAPSID>\SYS\exe\uc
    - Make a copy of current kernel by copying the folder: NTAMD64
    - Copy new kernelfiles (701_55 into the directory: :
    usr\sapmnt\<SAPSID>\SYS\exe\uc \NTADM64
    - Click "yes", when prompted to overwrite existing files
    - Go to SAP MMC console and start the SAP system again
    - make sure all instances goes into "green" status in SAP MMC console
    - tc=Session_Manager, choose "system", "Status", press "Shift+F5" to show the kernel info
    Upgrade part 2
    Upgrade the ABAP stack to Solution Manager SPS20/EHP1 including supportpackages
    - tc=SAINT
    - Choose "Extras" --> "Settings" --> "Import queue" tab
    - define 5 parallel R3trans processes
    - click "Confirm" (green checkmark)
    - Call transaction SAINT and choose "Start" and "Load".
    - Choose the right pushbutton to load the stack configuration (SW-Center Stack-XML).
    - Alternatively,the SAINT queue can be buildt manually.
    Select the following components and choose "Continue".
    PI_BASIS 701
    SAP_ABA 701
    SAP_BASIS 701
    SAP_BW 701
    BI_CONT 704
    CRMUIF 500
    ST-A/PI 01L_CRM570
    ST-PI 2008_1_700
    ST-SER 701_2008_2
    If all necessary conditions for importing the add-ons are met,
    the system will display the relevant queue. The queue consists
    of installation packages, upgrade packages, Support Packages
    and Conflict Resolution Transports (CRTs).
    - To start the installation process, choose "Continue".
    - The system prompts you to enter a password. This password is
    provided below:
    Before the installation, you will be asked to enter a password for
    each component you selected. This password is (in bold):
    Component      Package name                Password
    CRMUIF 500        SAPK-500AGINCRMUIF      D855FD497D
    PI_BASIS 701      SAPK-701DHINPIBASIS     3DD62AEC78
    SAP_ABA 701    SAPK-701DHINSAPABA    3DC721976A
    SAP_BASIS 701  SAPK-701DHINSAPBASIS 3EC433FE19
    SAP_BW 701      SAPK-701DHINSAPBW       3ED240976A
    BI_CONT 704       SAPK-704DHINBICONT       14158187D7
    BI_CONT 704       SAPK-704IHINBICONT        1415818AD7
    Upgrade part 6
    Implement notes after upgrade
    - login to productive client
    - tc=SNOTE
    - Press "Download SAP Note" (CTRL+F8).
    - Type notenumbers: 1250122, 1270420, 1256049, 1243425, 1236420 and 1269582 and press "Copy" (F8) and "Execute" (F8).
    - Mark notenumber: 1250122 and press "Implement SAP Note" (CTRL+F1). REMARK: this note should be implemented in pair with note: 1270420.
    - Mark notenumber: 1256049 and press "Implement SAP Note" (CTRL+F1). REMARK: this note should be implemented in pair with note: 1243425.
    - Mark note 1236420 and press "Implement SAP Note" (CTRL+F1).
    - Mark note 1269582 and press "Implement SAP Note" (CTRL+F1).
    Upgrade part 7
    Increase EventTimeout to avoid deployment errors in Java stack for SPS20/EHP1
    - Log on to Server
    - Open config Tool by clicking: config.bat in the directory:
    - In the navigation area choose: Cluster-data --> Global server configuration --> Managers --> ServiceManager
    - in the Global properties panel, set the Custom value of the EventTimeout property to 120
    - choose "Save"
    - Restart the Central Instance
    Upgrade part 8
    Upgrade the Java stack to Solution Manager SPS20/EHP1 including supportpackages
    - Logon to SAP server
    - Open JSPM by db.clicking the go.bat file in the directory:
    usr\sap\<SAPSID>\DVEBMGS<instance>\j2ee\JSPM  
    - Logon to JSPM (SDM) using the same password as J2EE_ADMIN
    - Choose "deploy SPS stack"
    - Follow the guidelines from JSPM
    Remark:
    First the JSPM application is updated, which requires restart of the JSPM
    Second: all other Java packages is deployed, which requires restart of the Java Engine cluster a couple of times during that phase - all controlled by the JSPM application + manual interaction via the Cluster administrator (stop/start of clusterressources).
    During use of JSPM, refer to Note 891983 - JSPM: Central SAP Note SAP NetWeaver 2004s AS Java regarding troubleshooting if needed
    Upgrade part 9
    Update LM-SERVICE.SCA and LM-TOOLS.SCA to latest patch level
    - Logon to SAP server
    - Open JSPM by db.clicking the go.bat file in the directory:
    usr\sap\<SAPSID>\DVEBMGS<instance>\j2ee\JSPM  
    - Logon to JSPM (SDM) using the same password as J2EE_ADMIN
    - Copy the files to directory:
    usr\sap\trans\EPS\in
    - Choose "deploy single package"
    - Follow the guidelines from JSPM
    Post upgrade 1
    Temporarely adjust the time out values for the HTTP service
    - login to the productive client
    - tc=SMICM
    - navigate in the menu to GOTO -> SERVICES
    - Set the checkmark for HTTP
    - navigate in the menu to SERVICE -> CHANGE
    - set the time out values for "Keep Alive" and "Max. Processing Time" to about 6000
    Post upgrade 2
    Restoring all jobs to the status before the upgrade phase
    - In productive client, tc=SE38, run the program "BTCTRNS2".
    This will restore all jobs to their previous status
    Post upgrade 3
    - Logon to productive client via SAPGUI
    - TC= SOLMAN_SETUP
    - Follow the setup wizard. If You allready have done configuration in Your system, do not use "Initial Setup"
    Post upgrade 4
    Generation of objects
    - tc=SGEN
    - Mark "Generate all objects of selected software components" and click "Continue"
    - Click on "Select all components" and click "Continue"
    - Click on "Select all" applications servers and click "Continue"
    - Click on "Start job directly (in background)"
    Post upgrade 5
    Checking diverse tc/functionality
    - Login to productive client
    - tc=DSWP
    - Choose "Operation", "Change management", "Maintenance optimizer". Is it posible to create new maintenance transaction?
    - Choose "Solution landscape". Is it possible to browse the landscape?
    - tc=ST22. Is there any dumps?
    - tc=SM21. Any error in log?
    - tc= SOLUTION_SETUP. Does it work?
    Post upgrade 6
    Unlock all users exept from already locked user preupgrade
    - In TC=su10 click on "Authorization data"
    - Scroll down and in "Additional selection criteria" check the "Locked users only" box
    - Click on "Execute" (F8)
    - Click on "Transfer" in upper left corner
    - Click on "Unlock" icon

Maybe you are looking for

  • Windows 7 desktop does not fill entire screen on macbook pro 17" (mid 2010)

    Hi, First of all I apologize for posting such a long question but in order to best describe the problem I am having with my MacBook Pro, I had to mention every detail. I recently installed windows 7 x64 home premium on my new macbook pro 17 inch (mid

  • How to change the page number of the existing PDF during assembling?

    Hi All,        I am going to assemble two PDF's. Both the PDF's are having page no. So i am assembling two pdf's using invokeDDX method. I am setting page number in the DDX. Assembled PDF is having both the page no's, old page no and the newly genera

  • Setting classpath and library path...

    hello.. i have downloaded the jfreechart1.0.4 for adding chart in my java application...though i have gone through the installation guide...but i havent figured it out how to make the packages available to my java application.... i am very new to jav

  • CO Validation check Business Area

    Hi gurus, so my request is to give me solution about my validation. i wish skip business area to be fill in field - business area in KS01. My validation is: Prerequisite:  Controll. area = '1000' Check:Company Code IN COMPANYCODES (set all company co

  • Dunning levels

    Hi Gurus So far i understand that Dunning level is updated in the Customer master and Line items after after notices are printed out.  These levels can be changed also.  What would the business scenarios where someone will need to change the Dunning