Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature

Hi all,
I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes.  Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
Best regards,
Ellie

John,
The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
To the OP - Good luck,
Hunt

Similar Messages

  • Upload problems with Facebook and Vimeo from Premiere Elements 10

    I have created a project in HD and am trying to upload to Vimeo.  Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website.  Project is "blurry" when viewed.  I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect.  Can anyone give me the correct presets for Vimeo from Premiere Elements 10.  I can view other people's video in HD and they look fine so I don't think it's my computer monitor.   I'm sure you will need more information about my project so please give me a list of specific things you need to know.  Thank you.
    My Facebook problem is as follows.  If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected.  Problem is, I would like to upload to my business page.  Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page.  Does anyone know the values of the preset so I can upload the video to my business page.  My business is event and wedding videography so I would like the posts to be as clear as possible.
    If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook.  Thank you.

    VDRAVES
    I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
    Please see
    Share/Computer/AVCHD with Presets = Vimeo HD
    Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
    I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
    If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
    When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
    In all cases, watch for file size versus bitrate versus quality of end product.
    Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
    Please review and let us know the outcome.
    Thank you.
    ATR

  • Unable to upload entire video to Youtube

    Hey Guys,
    So, I created a simple 8 minute slideshow using Photoshop and then exported it into Premiere. I uploaded the video from Premiere directly onto Youtube but only 1:04 of the video is uploading to Youtube. Any advice?
    Thx.

    John,
    The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
    Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
    The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
    To the OP - Good luck,
    Hunt

  • How to upload a video clip to iCloud?

    Hi folks,
      I have iCloud setup for all of my computers (mostl MacPro) for iCloud.  Everything wokrs fine but this issue:  iCloud is able to autmomatically sync my photos from my iPhoto and share them with other MacPros; however, it won't load and sync a video clip in iPhoto - from Sony Cybershot Rx100 - to other MacPro!
      My questions are:
    1 - What do I need to do in order for iCloud to automatically upload my video clip (in iPhoto) to the iCloud then share it with other MacPro?
    2- If iCloud is not able to autmomatically upload my video clip, is there a way for me to mannually upload and download the video clip to/from the iCloud?
    Also I'm not sure if the video clip should be placed in the right place in order for iCloud to upload and share with other MacPro?  When I plug my camera to my MacPro vua USB port iPhoto automacatically displays the photo files and the video file in it.  iPhoto would be able import both the phto and video files though, but I'm not sure if the video clip is supposed to be upload (by default?) to the iPhoto?
      Any help/suggestion/recommendation is greatly appreciated!
      Thanks
      John N.

    Welcome to the Apple Community.
    Videos are not synced in photostream.
    If you would like to use iCloud to sync all types of documents between Macs, you may wish to look at my User Tip.

  • How do I apply a filter to an entire video clip?

    I'm trying to find out how to apply a filter, e.g. Oil Painting, to an entire video clip and not just one frame.
    Been trying to work with keyframes but it wont happen - all I get when applying a filter from the Filter Gallery
    is a filter applied to just one frame (not even a second of the video clip i.e.).
    So, the question is: is it even possible to apply a filter from the gallery to an antire video clip? If so, how?
    Thank you very much!

    Tried it, works like a charm!
    Thank you!

  • I just recently upgraded to iMovie 10.0.1.  Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes.  How can I get my entire video clip at once without a break again?

    I just recently upgraded to iMovie 10.0.1.  Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes.  How can I get my entire video clip without a break again?

    As long as you know your serial number you can download PSE from here:
    Download Photoshop Elements products | 11, 10
    If you don't know your serial number:
    Find your serial number quickly

  • I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

    I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

    Post in the iMovie forum. 

  • HT2688 Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help

    Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help please

    I also have this problem, as does everybody else I know who has tried to use the video in icloud. As the original poster says, they can be uploaded, but will only play on the device from which they were originally uploaded, appeaering only as images which display an endless buffering symbol when "played" on any other devices with which the photostream is shared.
    Has anyone been able to get this to work? And if not, why is there no acknowledgement from Apple that this bug exists and will be addressed in an update (now running 7.0.2 and still no improvement)? It was, after all, advertised as one of the attractive new features of iOS 7. So why the stony silence?

  • Trying to upload video to you tube through Premiere Elements

    I'm trying to upload a video to YouTube through Premiere Elements.  The program asks for permission and I grant it but nothing else happens?  Help.

    YouTube is kind of a  moving target -- so sometimes direct upload to YouTube stops working for reasons not related to the software.
    When  that happens, the best solution is to output your video using Publish & Share/Computer/AVCHD with the YouTube preset and then manually upload the video through your browser.

  • Can't upload from premiere elements to youtube

    I'm trying to upload a 25 minute video to youtube. It says the following: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of the video and try again."
    youtube supports videos of this size now.  How can I get past this?  Thanks!

    Thanks A.T.  So far the default setting are working just fine, but this is good info in case that changes.Jan
          From: A.T. Romano <[email protected]>
    To: Janice Yuvan <[email protected]>
    Sent: Saturday, May 2, 2015 11:30 AM
    Subject:  can't upload from premiere elements to youtube
    can't upload from premiere elements to youtube
    created by A.T. Romano in Premiere Elements - View the full discussionjanicey For your workaround, you have been pointed to Publish+Share/Computer/AVCHD with Presets = YouTube Widescreen HD.The default for that preset is 1280 x 720 @ 24 progressive frames per second with a bitrate of 8 Mbps (megabits per second). If you want other than that default setting, you can customize that preset to 1920 x 1080 @ 29.97 or 25 progressive frames as well under the Advanced Button Video tab of the preset. Determine if the bitrate needs adjustment and the file size is acceptable You might also want to explore using Presets = MP4 - H.264 1920 x 1080p30 (or 25 as appropriate) and customize the preset under the Advanced Button/Video Tab of the preset. Watch the file size. If you are OK with the 1280 x 720 for quality and file size, then please disregard the suggestion for this. If you are interested in the suggestion, do not hesitate to ask questions or ask for clarification if needed. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505552#7505552 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505552#7505552 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How do I export a video clip to iMovie from iPhoto?

    My video clips and photos were imported from my iPhone 5 to iPhoto on my macbook pro.  Using iMovie, I can import the photos from iPhoto but am unable to import the video clips from iPhoto into iMovie.
    Is there a way that this can be done?

    How are you trying to import from iPhoto to iMovie? The movies in your iPhoto Library should appear in iMovie in the Event Library in the section for your system drive as event "iPhoto Videos".
    Here the videos from your iPhoto library should be shown, that you last opened in iPhoto; for example with my version of iMovie (9.0.8) the event library looks like this:
    Don't you see the videos there? What is your iPhoto version and iMovie version?
    As a workaround to import to iMovie you can always select the video in iPhoto and use "File > Reveal in Finder" to show the movie file and then import to iMovie using the Finder. Caution: When importing from the iPhoto library using the Finder, be sure to import to iMovie using the option "Copy files", not "Move files". Otherwise they will vanish from your iPhoto library.
    Regards
    Léonie

  • I am unable to initiate a video chat on facebook from a pc to a new ipad mini.  Is this possible and do I need a special app on my iPad?

    I am unable to initiate a video chat on facebook from a pc to a new ipad mini.  Is this possible and do I need a special app on my iPad?   Receivew a message on the PC after request a video chat with the iPad that the connection is too slow and the iPad does not show an incoming video.  JMaruje

    A Mac Mini s a computer you can use with the iPad.
    YO do not need a computer fro backup since yo can backup to iCloud.
    However, sometimes software glitches occur and require connecting the device to a compute to restore vi iTuunes.
    You can control a computer via an iPod with an app like TeamViewer or LogMeIn. There are others too.
    You can also use an iPad a a SECONDAY monitor for a computer. with other apps.
    You need a dedicated monitor,  keyboard and mouse to setup the Mini. You can use a PC USB mouse and keyboard.

  • How do I get video clips into Organizer from Elements?

    I have broken my raw video into pieces in elements but can't get it to import into organizer.
    I am using Elements 11 Trial.

    The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
    What I am trying to do is
    1) Cut it down into 60 individual videos (which I did and currently have in my project).
    2) Save the pieces off as individual video clips.
    3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
    4) Polish/edit those that make the grade.
    5) Organize and assemble.
    Does this make sense?
    t
    Date: Mon, 19 Nov 2012 14:44:31 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I get video clips into Organizer from Elements?
        Re: How do I get video clips into Organizer from Elements?
        created by whsprague in Premiere Elements - View the full discussion
    karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered.  Then "Share" to a computer file. Pick a file type that suits your needs.  Be sure to check the box titled "Share WorkArea Bar Only".  Unfortunately, the clip piece will be re-encoded.  PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using.  The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips.  Some sort of magic is in them where re-encoding does not take place.  The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers.  Bill
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Issues with video quality after editing in Premiere Elements.  Please help!!!

    I am having issues with the quality of video output from Premiere Elements.  I tried to combine 4 videos clips that I took (all were crystal clear when viewed prior to combining them in Premiere Elements).  The first clip is quite pixelated, the second has wavy lines running across it the whole time (recorded webinar), and the third clip looks crystal clear. (FYI...first clip and third clip were both taken using the exact same settings on my Canon)  I am not very tech "savvy".  I am guessing it has something to do with the way I saved or "shared" the video after editing?  But I have NO IDEA what settings I need as I am not very "tech" savvy!  I want to upload the finished product to Vimeo.  I looked on Vimeo and followed instructions from a tutorial that a Premiere Elements user posted about how to save the best quality video for uploading to Vimeo, and the quality turned out FAR WORSE than the first time I saved it.  Please help!!!  Thanks so much!

    Thanks for your response John!  Do you think my issue may be due to the way I initially "set up" the project when I created a new project from the very beginning?  I am operating on Premiere Elements 10, so I do not see an option for sharing online directly to vimeo....only facebook and Youtube.  I am combining 4 video clips.  3 of the 4 clips were shot on my Canon EOS 60D, and 1 of the video clips was a recording of a PowerPoint based webinar that we did via Meeting Burner (meetingburner.com).  Since I am combining more than 1 video format, is it likely that I will run into quality issues?  The strange thing was that 2 of the clips shot with my Canon showed up blurry after exporting/sharing my final video, but one of them was still crystal clear.  This doesn't make any sense to me since I did not change any settings on my Canon.  I didn't see any specific tutorials on setting up the project to match the video from that list of Tutorial links.

  • How do I publish a video in flash from Premiere Elements 13?

    I've created a video I wish to publish on my website using flash, as I have with previous videos.  However, I no longer see flash as a choice unto itself.  If I choose "Flash Video for YouTube," the warning pops up that "The video duration exceeds the maximum duration supported by the destination."   It's not actually for YouTube, but I don't see any obvious was to create flash output other than for YouTube.
    In previous versions, flash output was an option with no (practical limit) on the output size.
    Is there some option/choice I'm missing?
    Thanks!

    ABC_Digital
    No flash video export and no workaround that I have ever seen for this Premiere Elements 13 situation.
    Premiere Elements 13 no longer offers the Publish+Share/Computer/Adobe Flash Video as last seen in version 12/12.1. It is what it is. No workarounds
    that I have seen. Even the webDVD feature has been removed from Premiere Elements 13.
    Other considerations in what you wrote
    a. Premiere Elements' built in feature has its file size and duration limits (for 13/13.1) 2.2 GB and 15 minutes. YouTube extended time accounts do not
    work in the Premiere Elements built in feature.
    b. Use of the YouTube preset "flash video for YouTube" uploads the Timeline content to YouTube where YouTube does the file conversion to flash format
    for display there. Any copies of your own uploads to YouTube have been available, but as .mp4 and not FLV or F4V.
    That is what I have been able to put together with regard to the questions that you presented.
    Any questions, please do not hesitate to ask.
    Thank you.
    ATR

Maybe you are looking for