Unable to upload SERDAT(Serialization idoc) in PI from 4.6C version

Hi,
I am facing problem in uploading SERDAT(Serialization IDOC) in PI from 4.6C version. But other IDOC's like (debmas, cremas and other IDOC's) i am able to IMPORT into PI system. Can any one help in this regard.
Thanks
Vijaya

What problem you are having? Any kind of error? please share the details.

Similar Messages

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature

Hi all,
I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes. Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
Best regards,
Ellie

John,
The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
To the OP - Good luck,
Hunt

Unable to upload new os 4.5.8 from DM to my BB

I see the new OS on my DM but it keeps telling me I don't need an upgrade.
on my BB options-about v4.5.0.11
I need/want v4.5.0.81
my BIN T-Mobile has it, that is how I was able to download it. but now I can't upload it.
PTL \0/
Solved!
Go to Solution.

If you are using the most recent version of BB Desktop Manager it will find and install upgrade for device OS automatically.
Download it here: http://na.blackberry.com/eng/services/desktop/
If your downloaded OS package is exactly from your wireless provider and for your device model - it should install without problems. It is preferred to use BB Desktop Manager as mentioned above to upgrade your device OS automatically, but if you want to do it manually - delete Vendor.xml from the installed device OS files on your computer. Connect the device to the computer and start BB Desktop Manager and after that run Application Loader in it.

Serialization in getservbyname - regression from prev windows versions?

I am using build: 8250.
I have been writing an app that makes use of the function call getservbyname. I noticed intermittent failures in this call so I modified by program to call getservbyname repeatably in a loop. The app works fine and getservbyname never fails. However, when I
run two copies of the app concurrently (in separate windows) getservbyname calls periodically fail with error 11004.
This same test works on previous versions of Windows - Windows 2008 R2. Is there a bug in my program or is this a known issue with Windows 8 server?
My program is pretty simple:
int main()
   struct servent *s;
   int i=0;
   WSAInit();
   for (; ; )
   s = getservbyname("DB2_MARIE", "tcp");
   if( !s )
      printf("error is %d\n", WSAGetLastError() );
   else
      printf("successful\n");
   s = getservbyname("DB2_MARIE_1", "tcp");
   if( !s )
      printf("error is %d\n", WSAGetLastError() );
   else
      printf("successful\n");
   s = getservbyname("DB2_MARIE_2", "tcp");
   if( !s )
      printf("error is %d\n", WSAGetLastError() );
   else
      printf("successful\n");
   s = getservbyname("DB2_MARIE_3", "tcp");
   if( !s )
      printf("error is %d\n", WSAGetLastError() );
   else
      printf("successful\n");
Service names are valid in my environment - configured in services file.

Hi,
I would like suggest you post in the official scripting guys forum:
http://social.technet.microsoft.com/Forums/en/ITCG/threads
Regards,
Yan Li
Yan Li
TechNet Community Support

Multiple Idocs (DEBMAS/ADRMAS) with SERDAT serialization to PI

Hi All,
I have a requirement that R3 systems sends data by means of serialization Idocs SERDAT basically which has two Idocs DEBMAS/ADRMAS. I need to generate a single structure at target side out of two incoming Idocs (DEBMAS/ADRMAS).
Could any one please advise me how can i extract data from two idocs in a single scenario?
Is there any standard approach already for this.
Thanks in advance.
Regards,
Prasad Babu.

You can achieve the scenario by using ALE Serilization at IDOC Message Type
The below example addresss a similar scenario but for MATMAS material master and CLFMAS classification .
Search for "Serialization by IDOC Type" . The first link will give you the insight. (I am unable to post the link here..)
After the IDOC's come to PI, you can have a BPM to co-relate (DEBMAS/ADRMAS using Customer / Contact Numbers) and create a single Outout message.
- Siva Maranani
Edited by: Siva Maranani on Nov 9, 2009 10:09 PM

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

XLS upload via HSODBC. Unable to upload numeric (float) fields

hi,
I wrote a program unit with Oracle Forms Builder 10g to upload and read an Excel sheet.
I created a HSODBC Data link to my DB, and used Excel 2003 to edit the XLS file to upload, and WEBUTIL_FILE_TRANSFER.CLIENT_TO_AS(client_dir_file,'\\server\dir\myfile.xls') to upload.
My DBLink works and Im able to upload the file. But it seems oracle is unable to upload some fields containing numeric (float) values.
running DESCRIBE Sheet1$@hsodbc; I got this table structure
UPLOAD_DATE          DATE
NUMBER VARCHAR2(32512 CHAR)
CODE VARCHAR2(32512 CHAR)
DESCR          VARCHAR2(32512 CHAR)
SIMILARS FLOAT(49)
WIDTH VARCHAR2(32512 CHAR)
HEIGHT VARCHAR2(32512 CHAR)
HIGH      VARCHAR2(32512 CHAR)
ITEMS      FLOAT(49)
fields SIMILARS, WIDTH, HEIGHT, HIGH, ITEMS contain numeric values in float format (ex: 1,00000). When I run
SELECT * FROM SHEET1$@HSODBC
I get that WIDTH, HEIGHT, HIGH columns are EMPTY (contain NULL values), while SIMILARS and ITEMS contains not null values.
I am sure that the \\server\dir\myfile.xls contains not null values for WIDTH, HEIGHT, HIGH fields! I tried to change cells format before upload, setting them to FLOAT, but I got no results!
Please help me, how can I do to change cell format in order to obtain a correct upload?

E.C.
there is a mistake in the subject. As I said in my thread, the upload works and the uploaded file contains all values. My problem is that I am "unable to READ" the numeric values stored in VARCHAR2 fields.

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

Error while deploying the taskproject through jdeveloper- Unable to upload

Hello,
I implemented a sample process with a BPEL and Human task. am not able to deploy the taskproject through jdeveloper. getting the below in deployment log
[01:11:57 PM] Wrote Web Application Module to C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war
[01:11:59 PM] Deploying Application...
[01:12:32 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\151679\LOCALS~1\Temp\VacationRequestTaskFlow.war' for the application 'VacationRequestTaskFlow' could not be loaded to the server 'http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 500 for URL: http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService
[01:12:32 PM] See server logs or server console for more details.
[01:12:32 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war' to 't3://uxunt460:7101'
[01:12:33 PM] #### Deployment incomplete. ####
[01:12:33 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer).
I tried to search in Server logs but no luck not sure whether the way am looking is right or wrong also i dont know where these details are present in server console.
Am a beginner in SOA., so may be thse questions look pretty amateur but help regarding this will be truly appreciated.
Thank You,
Bilal

Hello,
I implemented a sample process with a BPEL and Human task. am not able to deploy the taskproject through jdeveloper. getting the below in deployment log
[01:11:57 PM] Wrote Web Application Module to C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war
[01:11:59 PM] Deploying Application...
[01:12:32 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\151679\LOCALS~1\Temp\VacationRequestTaskFlow.war' for the application 'VacationRequestTaskFlow' could not be loaded to the server 'http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 500 for URL: http://uxunt460:7101/bea_wls_deployment_internal/DeploymentService
[01:12:32 PM] See server logs or server console for more details.
[01:12:32 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\VacationRequestHF\VacationRequestTaskFlow\deploy\VacationRequestTaskFlow.war' to 't3://uxunt460:7101'
[01:12:33 PM] #### Deployment incomplete. ####
[01:12:33 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer).
I tried to search in Server logs but no luck not sure whether the way am looking is right or wrong also i dont know where these details are present in server console.
Am a beginner in SOA., so may be thse questions look pretty amateur but help regarding this will be truly appreciated.
Thank You,
Bilal

Windows Media Player does not recognize my iPhone anymore- unable to upload photos.

Can anyone give me some guidance on how to solve this issue: My Windows Media Player no longer recognizes my iPhone and therefore I am unable to upload any of the photos I take.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

"Apple Mobile Device Support" will NOT uninstall from my computer, so I am still unable to upload iTunes

"Apple Mobile Device Support" will NOT uninstall from my computer so I am still unable to upload iTunes. I have tried it multiple times in multiple ways and after the uninstall always fails. Solutions to this specific problem?

I don't know... A link to the official repair advice is given at the top of my user tip. There was a new build of the iTunes 11.1.4.62 setup file released yesterday which is supposed to install cleanly on any system still back on iTunes 11.1.3.8, however they are still giving the same advice for problem systems that have already been upgraded. I.e. the new installer won't repair a currently borked install.
You can download 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components, then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
tt2

I am unable to upload Quicktime movies made with imovie to the web. I've tried using Filezilla (which worked well until recently) or even going directly to the webhost via Cox. The upload gets caught in a loop. nojo99

I am unable to upload Quicktime movies made with imovie to the web. I've tried using Filezilla (which worked well until recently) or even going directly to the webhost via Cox (my internet provider). The upload always gets caught in a loop. I have repaired permissions. I've been successfully uploading movies each week to my church website (or intermediary like Filezilla) for over a year. I cannot figure out why I'm no longer successful. Your feedback is desired and welcome. nojo99

I am unable to upload Quicktime movies made with imovie to the web. I've tried using Filezilla (which worked well until recently) or even going directly to the webhost via Cox (my internet provider). The upload always gets caught in a loop. I have repaired permissions. I've been successfully uploading movies each week to my church website (or intermediary like Filezilla) for over a year. I cannot figure out why I'm no longer successful. Your feedback is desired and welcome. nojo99

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

I am unable to upload the customer master data using BAPI.?

Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...

Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe

Unable to upload SERDAT(Serialization idoc) in PI from 4.6C version

Similar Messages

Maybe you are looking for