Unable to upload txt file when creating new message

Hi Expert,
We installed SolMan 7.1, but we are not able to upload txt file when
create a new message, detailed steps as below:
1. Click on “New
  Message” under “Common Tasks” in the left side
2. Click on
  “Attachment” under “Create Message”
3. Click on “Add”
  under “Attachment”
4. Select file and
  click on “OK”
5. But as the result, it says “No attachments. Select Add to
  upload a new attachment.”
Could you please help advise the reason and solution?
BR
Takashi

Hi Vikram,
Thanks for your reply.
I have tried again and found that, it seems if the file size is 0, it can't be uploaed; if the size if bigger than 0, then it can be uploaded.
So I close this discussion now. Thank you!
BR
Takashi

Similar Messages

  • The program making the flat txt file when creating payment proposal...

    Hello everybody!
    Do you know what is the program used by trx F110 (Automatic Payment transactions) to create the flat text file in the Operating System? I know that, in case of a payment method 'C' (check), SAP can print the check using the programs that appear at Printout/data medium tab (listed in the Form printing/DME box). But the issue is that the check is printing the street address of the vendor, not the one of the ALTERNATIVE PAYEE, in this case the payee is one of the vendor customers, but the check does not print the customer address.
    I would be glad if I could find the txt file creator program, due the information is sent to the printing program is at this file, so I become able to investigate the behavior of the program. Further beyond: do you know why F110 is not able to print the address of a customer of the vendor when making checks with alternative payee being one of their customers? Thank you and regards!

    Hi guys:
    Jeje, there was not standard program that made the txt file, but a Z program. The FI functional was able to locate it and then I modified it. Thank you anyway.

  • CREATE BANK STATEMENT UPLOAD TXT FILE SAPBYD

    Hi,
    I implemented bank statement upload TXT FILE and loading the file format MT940 UK, load the file with status CONFIRMED but does not perform any bank statement in the list of BANK STATEMENT just seems like INBOUND FILES with status FINISHED but not as financial status.
    Anyone have a UK model MT940, and knows that the next step has to be performed after loading INBOUND FILE
    Email: [email protected]
    PD: Attached my MT940 UK inbound file to review in case .
    Regards

    goto to the user exit where u will find import & export parameters...Now create a project and implement this enhancement...Inside the FM u will find Zprogram which needs to be created. Now write ur code in this by importing data and check routinues and export back to variables....When u run actual transaction, this user exit automatically triggers...

  • Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    First, go install the MacOS 10.10 updates - you should be on 10.10.2.
    I haven't heard of Photoshop not responding during opens and saves.  Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
    10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs.

  • SSMS crash when creating new database diagram

    For several years I have been unable to create database diagrams from within SSMS.  I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
    I have installed, uninstalled, and repaired many dozens of times.  I am currently using VS2013 ultimate with SQL2014 express.
    I have tried every related 'workaround' that I can find on the internet.  Still the problem persists.
    Any help would be deeply appreciated.
    Here are the relevant details with file versions:
    In SSMS, I right-click on a database and choose New Database Diagram.  A Blank diagram window appears with the SSMS error dialog:
    ===================================
    Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
    Program Location:
       at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
       at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
       at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
       at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
       at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
       at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
       at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
       at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
       at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
    con, String fileName)
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
       at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
    Version info taken from Sql Server  Management Studio/Help/About dialog:
    Microsoft SQL Server Management Studio      12.0.2000.8
    Microsoft Analysis Services Client Tools    12.0.2000.8
    Microsoft Data Access Components (MDAC)     6.1.7601.17514
    Microsoft MSXML                             3.0 4.0 5.0 6.0
    Microsoft Internet Explorer                 9.11.9600.17358
    Microsoft .NET Framework                    4.0.30319.18444
    Operating System                            6.1.7601
    DLL versions
    c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
    dsref80.dll  version 12.0.21005.1
    c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
    msdds.dll    12.0.21005.1
    msddsf.dll   12.0.21005.1
    msddslm.dll  12.0.21005.1
    msdds.mp.dll 12.0.21005.1
    msddsp.dll   12.0.21005.1
    c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
    msddsui.dll 12.0.21005.1

    Hello,
    There is a Connect item related to this issue. This is the link of that Connect item:
    https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
    Try the workarounds posted there (Workarounds section).
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Uploading .txt file to z table

    Hai Friends,
    I want to upload a .txt file to Z table which contains around 27 fields. but .txt file contains data in two lines by as follows.
    4.5  2.36  21.56 25  36.14  47.00  145.3  1247.6
    10.2  4.6  23.5 589.1  20.1  45.6
    Is it possible to upload the .txt file.

    Hi,
      It is possible to upload txt file to ztable. You need to write small program for that.
       Please see the example code below. Here from excel they are converting to internal table, use 'GUI_UPLOAD' to convert text file data to internal table and use this internal table to upload data into ztable. use MODIFY ZTABLE FROM TABLE ITAB.
    Also maintain the internal table structure and structure of the ZTABLE should match.
    **& Report  Z_DEMO_FILL_TABLE
    report  z_demo_fill_table no standard page heading line-size 255.
    selection-screen begin of block b1 with frame title text-003.
    selection-screen skip.
    *File Name
    selection-screen begin of line.
    selection-screen comment 5(28) text-001 for field p_file.
    parameters: p_file type  rlgrap-filename.
    selection-screen end of line.
    selection-screen skip.
    selection-screen end of block b1.
    data declarations.
    *data: get_po_header type standard table of BAPIEKKOC,
         get_PO_HEADER_ADD_DATA type standard table of BAPIEKKOA,
         get_PO_ITEMS type standard table of BAPIEKPOC,
         get_PO_ITEM_ADD_DATA type standard table of BAPIEKPOA,
    data:   get_poheader type standard table of bapimepoheader,
            get_poitem type standard table of bapimepoitem,
            it_data type table of alsmex_tabline initial size 0.
    data: wa_poheader like line of get_poheader,
          wa_poitem like line of get_poitem,
          wa_data like line of it_data,
    *tables used for catching messages returned by bapi
          gt_return   type standard table of bapiret2,
          gt_return1   type standard table of bapiret2.
    types: begin of x_po_tab,
      doc_date type bapimepoheader-doc_date,
      comp_code type bapimepoheader-comp_code,
      purch_org type bapimepoheader-purch_org,
      pur_group type bapimepoheader-pur_group,
      vendor type bapimepoheader-vendor,
      po_number type bapimepoheader-po_number,
      pmnttrms type bapimepoheader-pmnttrms,
      po_item type bapimepoitem-po_item,
      material type bapimepoitem-material,
      plant type bapimepoitem-plant,
      stge_loc type bapimepoitem-stge_loc,
      tax_code type bapimepoitem-tax_code,
    end of x_po_tab.
                    Search help for file                                 *
    at selection-screen on value-request for p_file.
      call function 'F4_FILENAME'
       exporting
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
         field_name          = 'P_FILE'
       importing
         file_name           = p_file.
                    START-OF-SELECTION                                   *
    start-of-selection.
    perform for uploading Excel file
      perform upload_file_path.
    perform for transfering Excel data to Internal table
      perform excel_to_itab.
      perform int_process.
    *&      Form  upload_file_path
          text
    -->  p1        text
    <--  p2        text
    form upload_file_path .
      call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        exporting
          filename                = p_file
          i_begin_col             = 1
          i_begin_row             = 1
          i_end_col               = 12
          i_end_row               = 5000
        tables
          intern                  = it_data
        exceptions
          inconsistent_parameters = 1
          upload_ole              = 2
          others                  = 3.
      if sy-subrc <> 0.
        message e000(zdbm) with 'Error in getting filename'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " upload_file_path
    *&      Form  excel_to_itab
          text
    -->  p1        text
    <--  p2        text
    form excel_to_itab .
      loop at it_data into wa_data.
        at new row.
          clear: wa_poheader, wa_poitem.
        endat.
        case wa_data-col.
          when '001'.
            move wa_data-value to wa_poheader-doc_date.
          when '002'.
            move wa_data-value to wa_poheader-comp_code.
          when '003'.
            move wa_data-value to wa_poheader-purch_org.
          when '004'.
            move wa_data-value to wa_poheader-pur_group.
          when '005'.
            move wa_data-value to wa_poheader-vendor.
          when '006'.
            move wa_data-value to wa_poheader-po_number.
          when '007'.
            move wa_data-value to wa_poheader-pmnttrms.
          when '008'.
            move wa_data-value to wa_poitem-po_item.
          when '009'.
            move wa_data-value to wa_poitem-material.
          when '010'.
            move wa_data-value to wa_poitem-plant.
          when '011'.
            move wa_data-value to wa_poitem-stge_loc.
          when '012'.
            move wa_data-value to wa_poitem-tax_code.
        endcase.
        at end of row.
          append wa_poheader to get_poheader.
          append wa_poitem to get_poitem.
        endat.
        clear: wa_data.
      endloop.
    endform.                    " excel_to_itab
    *&      Form  Int_process
          text
    -->  p1        text
    <--  p2        text
    form int_process .
      loop at get_poheader into wa_poheader.
        read table get_poitem into wa_poitem index 1.
    call function 'BAPI_PO_CREATE1'
      exporting
        poheader                     = wa_poheader
      POHEADERX                    =
      POADDRVENDOR                 =
      TESTRUN                      =
      MEMORY_UNCOMPLETE            =
      MEMORY_COMPLETE              =
      POEXPIMPHEADER               =
      POEXPIMPHEADERX              =
      VERSIONS                     =
      NO_MESSAGING                 =
      NO_MESSAGE_REQ               =
      NO_AUTHORITY                 =
      NO_PRICE_FROM_PO             =
    IMPORTING
      EXPPURCHASEORDER             =
      EXPHEADER                    =
      EXPPOEXPIMPHEADER            =
    tables
      RETURN                       =
       poitem                       = get_poitem
      POITEMX                      =
      POADDRDELIVERY               =
      POSCHEDULE                   =
      POSCHEDULEX                  =
      POACCOUNT                    =
      POACCOUNTPROFITSEGMENT       =
      POACCOUNTX                   =
      POCONDHEADER                 =
      POCONDHEADERX                =
      POCOND                       =
      POCONDX                      =
      POLIMITS                     =
      POCONTRACTLIMITS             =
      POSERVICES                   =
      POSRVACCESSVALUES            =
      POSERVICESTEXT               =
      EXTENSIONIN                  =
      EXTENSIONOUT                 =
      POEXPIMPITEM                 =
      POEXPIMPITEMX                =
      POTEXTHEADER                 =
      POTEXTITEM                   =
      ALLVERSIONS                  =
      POPARTNER                    =
      POCOMPONENTS                 =
      POCOMPONENTSX                =
      POSHIPPING                   =
      POSHIPPINGX                  =
      POSHIPPINGEXP                =
      endloop.
    endform.                    " Int_process

  • Unable to upload multiple files

    In MOSS, I am unable to upload multiple files from the Site Actions | Manage Content and Structure | New | Item menu. I have tried adding Word documents and image files (JPEG, GIFS) to no avail into the \images or \document folders. Even if I try just one file, three or five, the menu never initiates or progresses. It just sits. If I cancel, the menu returns immediately. I have tried to change security settings with no success. Trying to upload multiple files on different MOSS installations also fails. If this is related to a Web Dev settings, can you tell me exactly where the setting is? Thanks for your insight. cm

    Believe it or not, I have found a solution after about 4hrs of fiddling around. This appears to be a bug in Sharepoint 2007. There is a work around that I have discovered! Follow the steps below and let me know if this works for you. It has worked for me and other people so far.
    The steps are as follows:
    1) Browse to your website at http://<servername>/_layouts/settings.aspx; you will need to login by providing a service account name & password or your site collection administrator account & password.
    2) Once you login, click on 'Site Actions' menu.
    3) Then, click on 'Manage Site Content and Structure'.
    4) Click on any document library you want to upload or add files into. If you do not see the 'Upload' menu from the dropdown main menu between the 'New' and 'Actions' menu then you have this bug as well showing up on your server. Don't give up yet, there is a solution. Keep going through these steps!
    5) Click on 'New' and select 'Item'.
    6) You should now see the Upload Document page; under the input browse field there should be a link for 'Upload Multiple Files...', if you do not see this you will need to install either Office 2003 or Office 2007. If you do see it, click on it.
    7) Now, you should see the multiple upload page that allows you to select multiple files. If you try to select one or several and click on the OK button, nothing will happen. No need to worry! There is a work around. Just keep reading to the next step.
    8) On the hierarchy navigation you will have links something like this:
    WebSiteName > Folder1 > Folder2
    9) Click on the "Document Library" folder name; in our case it was Folder1. Basically its the folder you ended up in in step #4.
    10) Now, did you notice anyting in your menu change? Now you should be able to see the Upload menu option between the 'New' and 'Actions' menu that you could not see in step #4.
    11) Click on the 'Upload' menu and select 'Upload Multiple Documents'
    12) Now, you will be back at the Upload document page where you were in step #7
    13) Select one file or many and then click OK. Now it works!!! You should get an IE popup asking you that your about to upload files to your site, Click OK.
    VOILA!!!
    Don't ask me why, I do not know why this happens but it works.

  • BEx Analyzer 7.0: Uploading txt-file

    Hello experts,
    when I start a query and want to upload a txt-file for variable selection, it takes minutes and hours (depending on how many entries are in the txt-file).
    e.g. when using this BEx Analyzer 3.x and uploading txt-file with 60.000 entries for variable selection it takes just a few seconds. When using BEx Anlayzer 7.0 (selection upload) it takes 30 minutes an more.
    Is there any solution for this?
    Thanks in advance

    Dear Toni,
    Functionality has changed litle bit in BEx 7.0
    From Clipboard:
    1. After clicking on the "Select from List" click on the "More >>" button.
    2. Click on the right box to set the focus.
    3. Past (Ctrl + V).
    From txt file:
    1. After clicking on the "Select from List" click on the "More >>" button.
    2. Right click on the right box and choose "Upload selections" option.
    3. Select the txt file you want to import.
    Regards,
    Arvind

  • I can not save  when creating new location i see this error

    I CAN N'T SAVE when creating new location i see this error
    hi all
    when log in to hr responsability and go to location and want to create new location i fil all mandatorey data
    and when save new location it can n't save and this error appear below in the tolbar
    FRM-40735:ON-INSERT trigger raised unhandled exception ORA- 29273.
    have any one can help me to solve this error
    my application details
    apps 12.1.1 vision instance in hr responsability
    also the same error when crating the location in payables respobsability

    To implement the solution, please execute the following steps:
    1. Go into the responsibility: System Administrator
    2. Navigate to Profile > System.
    3. Clear the value at the Site level for the profile option IRC: Geocode Host.
    4. Retest the issue.
    5. Migrate the solution as appropriate to other environments.
    Edited by: 793535 on Sep 23, 2010 3:35 AM

  • Is it possible to read txt files on the new ipod nano? as it was on the 5th gen

    is it possible to read txt files on the new ipod nano? as it was on the 5th gen.

    We won't know for sure until either the iPod is released and somebody can verify that or when the manual is available online from Apple.
    B-rock

  • When creating new track in stereo... track opens in mono in arrange window

    Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

    Hi there,
    I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
    Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
    Kirby

  • How to change the default save encoding of the dvm files when create dvm???

    When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
    After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
    But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
    Files:
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
    How to change the default save encoding of the dvm files when create dvm in ESB control ???

    I have the same problem.  When I updated to Mavericks now the bookmarks bar font is huge.  I liked it the way it was before.  I liked the smaller font.  Also wish I could change the color of the sidebar and font/folders too.
    I tried to see in preferences if there was anyway to change it, but I don't see anything there.

  • When adding a PDF file to a New Message in Mail it does not show up as an icon link, the entire document appears. How can you attach a PDF without the entire document displaying itself?

    After scanning a document, I save the file in a PDF format. When attaching the PDF file to a New message it appears on the entire page instead of a PDF icon link that the recipient can click on to open. Why can't I get the PDF file to appear in a icon format? Thank you.

    Control mouse click the document and select View as icon.

  • Run Time Error in e-commerce crm 5.0 when creating new order

    Hi all,
    I am getting Run Time Error in e-commerce crm 5.0 when creating new order, shopping basket is comming , but while creating order , getting run time error.
    Thanks,
    Nagesh

    Hi nagesh,
    Are you able to resolve the issue. Please let me know the solution.
    I had started a thread with a same problem but in ERP E-commerce.  Points will be rewarded if you provide the solution in the thread below
    Re: Run Time Error in e-commerce crm 5.0 when creating new order
    Thank You
    Ram

  • Cannot select name when creating new DC

    Hi all,
    It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
    In this thread Cannot select vendor when creating new DC I couldn't select vendor.
    I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
    [snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
    Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
    I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
    Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
    I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
    I use local SLD which is part of the J2EE.
    I don't get any error messages (from NWDI/SLD/NWDS).
    I don't remember this kind of problem with NWDI on 6.40 versions.
    Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
    Please help,
    Thanks,
    Omri

    Solved it on my own by deleting and creating the track again (with the same settings!!!)

Maybe you are looking for