Unable to use 4 monitors with GTX 970

I used to run 4 monitors with my EVGA 660Ti. I recently purchased a Msi GTX 970 4GD5T OC and now my VGA only utility monitor on the DVI-I port (with included adapter) wont display when in windows. It displays the bios on boot but once windows 7 initializes it reads "no RGB input". I must be missing something simple that I did before with my 660Ti but I can't remember. Tried it with another VGA only flat screen I had and the same results.
Any help would be appreciated.

Do you mean by only DVI won't display or something? four ports on vga or some ports in onboard port? Did you check NVIDIA control panel 3D Settings--Configure surround, and right click screen resolution on desktop?

Similar Messages

  • Can I use another monitor with my iMac desk top?

    Can I use another monitor with my iMac desk top? Our monitor screen is going out and would like to have another option then replacing the whole thing! I think A LCD TV would be less expensive than the repairs to our iMac.( OS 10.6.8 )

    Yes, but we need to know exactly which year model you have? So that we can advise you on exactly which adapter you need for you iMac.
    see > How to identify iMac models
    Plus, adding that Computer Monitors make better displays than TVs and comparatively cost a little less than TVs.
    For examples of monitors that have both DVI and VGA inputs:
    see > LG 21.5" Widescreen FlatPanel LED HD Monitor E2242T - Best Buy
    or > HP 20" Widescreen FlatPanel LED Monitor W2071D - Best Buy

  • I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

    I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

    Here are the Mini's specs:

  • I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.

    I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.  Apparently I cannot downgrade to iOS 5 on my iPhone. Please tell me I don't have to pay anything to be able to use my products......

    Which version of iTunes?
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    Unless this is a new iPhone 5 I believe the older ones will work with iOS6 and iTunes 10.6.3.  If it won't, you will need to upgrade operating system version.

  • I am unable to use my keyboard with out a delay, how do I fix this

    I am unable to use my keaboard with out a delay. How do I fix this?

    when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Very Initial results PPBM8 (CC 2014) with GTX 970 SC

    Well this has been an interesting evening with my new EVGA GTX 970 SC with 4 GB.  I got over $50 off on an open box unit so I could not resist!
    My single GPU benchmark from PPBM using MPEG2-DVD with Hardware Acceleration scores have been the same as my GTX 770 SC.
    I hope that GPU-Z is reporting this new GPU properly.  There may be some confusion here with a brand new board.
    I downloaded the latest EVGA overclocking tool Precision 16 and tried to adjust the memory speed as I have done dozens of times and I could not get any changes showing in GPU-Z.
    I do like the it has HTML 2.0 (4K monitor compatibility).
    I do like the lower power dissipation.
    I do like the slight lower price.  (4 GB GTX 770 to 4 GB GTX 970).
    In the next few days I hope to get the answers somehow on the overclocking of the memory and compatibility with GPU-Z
    Testing with Premiere 8.0.1.21

    Thanks much Eric, now I hope I can get our results page updated.  Apparently with the new Maxwell's you cannot change the real memory speed.  I have sent more time with EVGA and no one can explain why.  It can appear to be set differently but it does not change the results like it has in the other previous cards.
    I will install my GTX 770 with the GTX 970 to see how they play.

  • How to use one monitor with two Power Macs

    I searched this forum and was unable to find an answer. Although I believe it's probably here.
    Nevertheless, I have a Power Mac G5 and a rarely used Power Mac G3. I'd like to share the G5's VGA Accusync 120 CRT monitor with the G3. I know there is a way to switch the monitor between computers without pulling plugs in and out of the machines.
    Does anyone have any specific switch I could buy to solve this issue. I don't care so much for picture quality for the G3. But I don't want to compromise picture quality for the G5.

    You're looking for what's called a KVM (Keyboard, Video, Mouse) switch.
    This one should do what you're looking for. I've not used it, but it does VGA switching like you want and is inexpensive.

  • Unable to use dual monitors in Windows 7

    I just got a T500 and am unable to use my dual monitors.  We use a docking station to hook up all of the periphals.  The VGA connector works fine.  The monitor on the DVI is not recognized.  Drivers have been updated and the monitor is operational.  I get a Generic Non-Pnp Monitor as the only choice because it is not recognizing the second monitor.  Any suggestions?

    Does the DVI cable work properly?
    I know as a fact that dual displays work on a T500 with Windows 7.
    Do you ahve the regular Advanced Mini-Dock http://www.hoathanhlaptops.com/upload/nhd_Docking%20T4xx.jpg or is it some other type of port replicator?
    Does the Monitor come with any install discs?
    Lastly, does the Monitor support both DVI and VGA?  What happens if you plug that monitor in with a VGA cable?
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

  • P67A-G43 select boot device issue with GTX 970

    I recently tried to install a new GTX 970 and ran into an issue where I am asked to select the boot device every time I boot the pc. I uninstalled the driver for my video card before installing it. The system appears to be stable once it boots into Windows. However, when I swap back to the GTX 760, that was in the system previously, it boots straight into Windows without having to select the boot device? I have seen lots of issues on the forum about the 970 and older boards but nothing specific to mine. I am currently have BIOS version 1.A0 installed. Any help with this issue would be greatly appreciated. Thank you.

    Yes, you need to update. Following the below updates to latest official bios (5.4 aka E7673IMS.540)
    >>Use the MSI HQ Forum USB flasher<<
         A.) Download >>this archive<< and place it on your desktop. Do not decompress.
         B.) Download and install the Forum flash tool.
         C.) Insert your FAT32 formatted usb stick.
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
         F.) Boot to the USB 
         G.) Now follow the directions and let the tool flash
         H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_amt81_win78_xp.zip

  • Unable to use 'copy' feature with registered version of quicktime pro.

    Hi.
    I have a registered version of Quicktime pro (7.1.6), and i am unable to use the copy feature. I captured several videos from work using a windows box and an application whose name escapes me at the moment. Due to the windows app being garbage, i was only able to capture in MPEG1 format (MPEG2 caused the app to crash, of course). I have brought the files home and am now unable to copy selections of it for exporting into smaller files. I can highlight lengths of the video (no audio, just video) but the 'copy' feature is grayed out still. Any ideas on what is causing this? The video format is as follows:
    MPEG1 Muxed, 640 x 480
    FPS: 29.97
    Data rate: 4066.42 kbits/sec
    I'm running 10.3.9, but have also had no success on a 10.4 macmini, so the OS doesn't seem to be the issue.
    I'm trying to get this video into imovie, but since it's over 600 megs, imovie cops out after a few hours and says it can't import it.
    Help?

    Not all multiplexed videos come with AC3. They don't have to have audio in the first place. Some of them come with Linear PCM, which is the case for iDVD's VOB files, and MP2. If a multiplexed video is equipped with AC3, you are right, and the resulting modified sub-clip won't contain audio. But if it's Linear PCM or MP2, the edited sub-clip will contain audio.
    I'm finished with this case.
    Message was edited by: Horror in Oklahoma

  • Using ADC Monitor with the new Mac Mini

    My husband has an Apple monitor with an ADC connection. I would like to purchase the new Mac Mini, but would like to use his current monitor. I know there is an ADC to DVI adapter, but the new Mac Mini uses the Mini Display...could I use yet another adapter? I am trying to save money, but don't want to the display quality to be really poor. Space is not an issue. Any help would be greatly appreciated.

    I have located that, but my concern is the DVI connection to the Mini Display connection on the Mac Mini. My understanding is that they are different.

  • How to use  two monitors with my Mac mini

    Hello,
    I have a Mac mini and using a 20" Samsung Monitor with it which works well. I also have my 40" LCD Samsung telly, set up next to it. Whenever i watch a DVD using my Mac i have to swap over the cables. Is there a way of getting the right cables etc and making it so i would be able to watch a dvd on the 40" and still use the 20" surfing the net etc. I had a similar set up with my old windows laptop, but cant seem to work out how do it with the mac. Both monitors have modern sockets, the 40in has HDMI/DVI IN and AGV, the 20" has AGV and HDCP/DVI IN. Many thanks.

    To the best of my knowledge there is no way to use dual displays on the Mini. You may be able to find some adapter that will allow you to physically connect two displays, but they will be mirrored, not spanned.
    To do what you describe would take spanning, which the Mini is not capable of doing. Unless something has changed recently,..

  • Trying to boot with GTX 970 and getting no signal..

    Installed a GTX 970 and since then the PC will switch on but I can't even get to the BIOS screen. If I take the card out then it boots fine.
    I've tried updating the BIOS and drivers as far as I can but I am now stuck as to what the problem could be.
    The lights on the card also come on but the fans don't spin.
    The build is currently:
    MSI Z97 Gaming 5 motherboard
    Intel Core i5-4690K
    G-Skill 4Gx2 Ripjaws DDR3 2133MHz
    Samsung 840 EVO 250GB SSD
    MSI GeForce GTX 970 4GB Twin Frozr V Video Card
    Corsair Builder Series CXM 600W Modular 80 PLUS
    Any help would be appreciated.

    I would:
    I assume this is a single card install?
    1. Check card in another PC (if possible)
    2. Check PS connections
    3. Check PS's ability to output enough wattage
    4. Try different monitor connection/cable
    See where that takes you... and report back

  • Can i use any monitor with my g5

    I have an Apple G5 computer with a DVi-I output for a monitor> can I use any monitor and purchase an adapter to to fit the DVI output?

    It depends on what the monitor actually supports, the size of the monitor, & the Graphic card capabilities.
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware>Graphics/Displays and report like this...
    NVIDIA GeForce 7800GT:
      Chipset Model:          GeForce 7800GT
      Type:          Display
      Bus:          PCI
      Slot:          SLOT-1
      VRAM (Total):          256 MB
      Vendor:          nVIDIA (0x10de)
      Device ID:          0x0092
      Revision ID:          0x00a1
      ROM Revision:          2152.2
      Displays:
    VGA Display:
      Resolution:          1920 x 1080 @ 60 Hz
      Depth:          32-bit Color
      Core Image:          Supported
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
    Display:
      Status:          No display connected
    Power Mac G5: Display Compatibility
    http://support.apple.com/kb/HT2707?viewlocale=en_US
    http://support.apple.com/kb/sp96

  • Can I use 4K monitor with my MacBook Pro Non-retina?

    I am considering to use 4k monitor for my MacBook. I have mid-2012 15" MacBook Pro. But I'm afraid that it will not perform as good as standard hd monitor. I'm wondering if any of you have tried using 4k monitor for your MacBook. Thank you.

    Won't work - at least not with 4K resolution.
    Supposedly, the late 2013 retina machines with the NVIDIA GeForce GT 750M with 2GB GDDR5 memory will run 4K resolutions - but only in Windows 8, NOT in any version of OS X, yet.
    So you'll just have to buy a new Mac Pro or wait until Apple comes out with an OS that supports running 4K on a new MacBook Pro Retina and buy that.
    Sorry,
    Clinton

Maybe you are looking for

  • [Solved] Well-supported and powerful video card?

    I'm sick of dealing with Catalyst updates breaking my system and crashing Starcraft 2, so I'm thinking I'll buy a new card for my rig. I want to get something that'll work better and make my life easier. So I'm looking for a desktop (PCI-e) video car

  • Interesting scenario, is there a need to reset logs periodically?

    10.2.0.2 Ent Ed -- Rman 10.2.0.2 -- aix 5.3 Is there a possible need to perform a reset logs periodically? This question initially came to me at the worst of times, during a recovery of a fairly important database. If / when you have to perform an sp

  • Trouble with ichat video

    I dont know if this is any where else in the forum but i am haveing trouble getting a video chat to work. The person im trying to chat with has a macbook as well. at first we had to try a few times to get it to work and then we did. when we got back

  • [SOLVED] "No codec present that can handle the stream's type" issue

    Hello. I got a python program that would play musics on a website, which doesn't work for a "no codec present that can handle the stream's type" issue. I have installed things like gstreamer, gstreamer-plugins, gstreamer-python, gstreamer-ffmpeg, and

  • To Find the SAP Query from the tranaction code or the program name

    Hi, I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query. <b>Please let me know how to find the SAP query from the transaction code or the program name