Unable to use Boldt .pst files

Hi
I recently heard about the Boldt software instrument sounds which I downloaded free at iComposition.
I placed them here: HD > Library > Application Support > GarageBand > Instrument Library > Plug-in settings (because that was where I found other .pst files placed).
When I open a new project and create a Software Instrument Track, I don't have access to the Boldt sounds in the Track Info preset window (as I have with eg Guitar / Steel String Acoustic).
Instead, I hit 'Generator', choose 'Guitar', hit 'Manual' and there it says eg Boldt 12-string Ovation. But when I select this, all I can get out of it is a kind of muffled sound, a bit like a electric piano ... and this is what all the Boldt sounds are like.
Any suggestions?

Hi,
First of all, please note Network Stored PST files are not recommended by Microsoft back in the very early age, please read the details in this blog below:
Network Stored PST files ... don't do it!
http://blogs.technet.com/b/askperf/archive/2007/01/21/network-stored-pst-files-don-t-do-it.aspx
As for your local .pst files, here are some suggestions:
1. Run Scanpst.exe to repair the possible damage in the .pst file, if you are using Office 2010 and Windows 7 as you mentioned, this application can be found in the following path:
<disk drive>:\Program Files\Microsoft Office\Office14 (32-bit version of Windows)
or <disk drive>:\Program Files\Microsoft Office(x86)\Office14 (64-bit version of Windows)
For reference, we can read this Microsoft KB:
http://support.microsoft.com/kb/272227/en-us
2. Move the .pst file to a new location on local, check if then the .pst file can be accessed or opened. Please make sure the user has the proper permission of the folder in which the .pst file is stored. Please also make sure Outlook is run as
administrator.
If you get any error messages and other details that may be helpful, please kindly let me know.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

Unable to load up .pst files

We are running older hardware, Dell Optiplex 780's. They were all running XP and we used CM2012 to push out Windows 7 to each of them. The OSD process, in a nutshell, does this.
Format C:, install windows 7, apply 780 drivers from Dell, join domain, install apps like Office 2010 and some others.
Once the machine is built you can log in and everything works. We are running
Office 2010. Word, Excel, PowerPoint, Outlook etc... But when you try to load up any .PST file it hangs and never loads the file. We've waited over 30 min and it never loads. We have tried both from a network
share and having the .PST local and it still will not load.
What should I look at to fix this? Could the Dell Optiplex 780 be so old it does not fully support Office 2010?
mqh7

Hi,
First of all, please note Network Stored PST files are not recommended by Microsoft back in the very early age, please read the details in this blog below:
Network Stored PST files ... don't do it!
http://blogs.technet.com/b/askperf/archive/2007/01/21/network-stored-pst-files-don-t-do-it.aspx
As for your local .pst files, here are some suggestions:
1. Run Scanpst.exe to repair the possible damage in the .pst file, if you are using Office 2010 and Windows 7 as you mentioned, this application can be found in the following path:
<disk drive>:\Program Files\Microsoft Office\Office14 (32-bit version of Windows)
or <disk drive>:\Program Files\Microsoft Office(x86)\Office14 (64-bit version of Windows)
For reference, we can read this Microsoft KB:
http://support.microsoft.com/kb/272227/en-us
2. Move the .pst file to a new location on local, check if then the .pst file can be accessed or opened. Please make sure the user has the proper permission of the folder in which the .pst file is stored. Please also make sure Outlook is run as
administrator.
If you get any error messages and other details that may be helpful, please kindly let me know.
Regards,
Melon Chen
TechNet Community Support

Unable to use Classic, encrypted files unusable,

Hi,
First post, been using Macs for years but I don’t really know too much, hopefully enough to follow directions.
In 2001 I created several WP files on Appleworks (? version/? computer model/probably OS 9.2.x) I encrypted them using Apple File Security. Recently I recovered these files from the hard drive which is all I have left of that computer. I am currently using an iMac G5 (OS 10.4.3) and I downloaded OS 9.2.2 from the Apple download. I can only find an alias to Apple File Security, the actual file is nowhere. I found mention of it being in the Security folder, but I cannot find that either. I searched the entire system and it apparently does not reside in the folder I have of 9.2.2 However I could only find System 9 “updates”, and I don’t understand what you need to do to build up to this capability, ie; fully functional Classic (which seems to open otherwise normally) with Tiger as the computer’s primary OS.
Did I correctly place OS 9.2.2 into my computer. I know there is additional System 9 folders on the installation disc (I discovered this later), however when I tried to install those, I got a message that I could not continue because there was nothing left to install which I interpreted to mean I already had successfully installed Classic. The downloaded installation seemed flawless. Nonetheless I tried to delete it and try again only to get a message that states “The operation cannot be completed because item “System 9.2.2” is required by the System. This “item” is located in Applications folder as a file named System 9.2.2
I am able to open these files, of course they are unintelligible gibberish. One of them had somehow become Unix-executable, and the rest although originally Appleworks WP documents are now opening as TextEdit only.
I used BBEdit 8.2.4 and was able to open the files, unfortunately they are still incomprehensible.
Assuming I have done anything right so far, is there any way to get this Apple File Security process so I can fully recover the files. I will live without them, I just want them And why cannot I get rid of this version of OS 9.2.2, and replace it with the Classic on the install disc, I didn’t need it before. Thanx in advanx.
iMac G5 Mac OS X (10.4.3)

Hey eww,
Thanx for such a quick reply. I sucessfully removed System Folder and took care of the first problem. Second; On the Install Disc that came with this computer is the following:
X Install Disc 2
Installing Mac OS 9 for Classic Support
Your computer does not come with Mac OS 9 installed. If you want to use Mac OS 9 applications with your computer, you have to install Mac OS 9 using this disc.
Important: Do not use this disc to install Mac OS 9 on any computer except the computer it came with. Also, while you can use Mac OS 9 applications with this computer, you cannot start up in Mac OS 9.
Apple recommends that you back up the data on your hard disk before installing this software. Apple is not responsible for any lost data.
If you want to install Mac OS X and the other applications that came with your computer, use the Mac OS X Install Disc 1.
Installing Mac OS 9
Follow these steps to install Mac OS 9:
1. Back up your essential files, if possible.
2. Insert the "Mac OS X Install Disc 2.”
3. Double-click "Install Mac OS 9 System Support."
4. Follow the onscreen instructions.
5. After selecting the destination disk for installation, continue following the onscreen instructions.
Well, I followed the onscreen instructions and then got the following message: "You cannot continue. There is nothing to install" and a picture of a hard drive with an arrow pointing down.
So if this represents a significant hassle forget it, I am perfectly able to forget the files but I thought that if Apple gave me Classic support it should work without a hassle. Since I otherwise have no reason to need it at present I don't care that much. What do you think, should I bother with figuring this out or not?
Mac OS X (10.4.3)

Unable to use the Logo Image

Hi all,
I want to use Logo Image at the Title of a report. But the problem is i am unable to use this .jpg file in Title Logo.
I have copied the desired jpg in these two locations :
OracleBI\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
OracleBI\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images.
Also i have restarted the Services .Then also i am unable to see the image file .
Here i have used the same process in our development server and it's working without any issues. I have done the same changes on my QA Server, but it's not working on QA.QA Server is 2 node Clustered environment.
Any help is Appreciated.
Thanks
Rondo.

You should be creating and deploying your own application for skin/style customisations, not amending images in-place. See docs:
- http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages
- http://www.oracle.com/technetwork/middleware/bi/customizing-oracle-biee-11g-176387.pdf

I Need to convert Exchange EDB to PST file

OST file of one of the users has got corrupt, due to which he is not able to access his mails. He has asked me to provide him a solution to get access to his mailbox back. Being an Exchange Admin, I can convert the exchange EDB to PST, which the user can
import into his Outlook to get the mails back. I have tried to export PST file from Exchange 2013 with powershell script but something went wrong and PST could not be exported. So, I am in a search of any alternate solution to Export Exchange EDB to PST.
Please help as I need to provide the used with PST file asap.

If the Exchange database is mounted within an Exchange server then yes you can use the native tools
https://technet.microsoft.com/en-us/library/ff459227%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
If the database is not mounted then you will need to use a 3rd party tool to gain access. There are a handful of companies that have this type of tool and we are one of them, however be careful in the tool you pick since all tools are not created
equally and if you choose a tool that is not accurate and complete you can end up with a serious mess. The absolute worst issue is when you are done recovering data and you find that its mangled and incomplete inside your live exchange server
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

How can I convert an outlook pst file to mac mail without using a windows based computer

I recently bought the new iMac as my older Windows based computer crashed with a bad motherboard. I have been trying to find a way to convert Outlook 2007 pst files to Mac Mail without the need to use a Windows based computer since all I have now is a Mac. I have the copies of the pst files on my Mac, so I am looking for the most efficient way to convert them to the format that I can then open them in the Mac Mail. Any suggestions would be greatly appreciated.

Hi - thanks for the instructions but where do you get the option for Quicktime. If I do File - Export I only get the options for File name, place and size but no option that allows to select quicktime:-(
Have you got any more tips?

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Unable to create a pdf file using the print routine

Hey all,
Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver....
I have vista and cs3... Any thoughts?
Thanks,
Murph
[email address deleted by host]

If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

Unable to use MTS files or have AVCHD sequences presets

Unable to use MTS files in premiere pro cs5. I have a imac processor: 3.06GHz Intel Core 2 Duo, memory: 4 GB 1067 MHz DDR3, Graphics: ATI Radeon HD 4670 256 MB, software Mac OS X Lion 10.7.4. The software dont have none of the AVCHD or HD sequences presets available. I dont understand! HELP!

Try the fixes listed in this article
http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html
Generally one of the fixes that they list will fix the issue you're experincing.
Make sure you have a internet connection when doing the steps for the license fix issue though.

Unable to see the uploaded file using gos object

Hi Experts,
I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
Code to upload the file.
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objkey = req_num.
obj-objtype = objtype.
CREATE OBJECT lo_gos_service.
CALL METHOD lo_gos_service->create_attachment
    EXPORTING
      is_object     = obj
    IMPORTING
      ep_attachment = l_attachment.
I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objtype = objtype.
obj-objkey = req_num.
CREATE OBJECT manager
    EXPORTING
      is_object = obj
    EXCEPTIONS
      OTHERS    = 1.
Please help me out how to view the file and list.
thanks & regards
T.Tamodarane
Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
Edited by: T.Tamodarane on Oct 23, 2009 9:56 AM

Hi,
Please post ur thred below:
PL/SQL
Regards
Meher Irk

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

The D610 needs ACR 8.3 so you are easily covered there. I am not entirely clear on the process you are using the bring the files onto your hard drive. The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

Unable to access my .xls file in iPhone or iPad using Icould drive. Request help.

I installed iCloud drive in my mac and saved a .xls file to be viewed and used with my iPad and iPhone. Though these devices are upgraded to IOs8 and Icloud drive is 'on' in these devices, I am unable to access this particular file in iPad or iPhone. Request help on how to open, view and amend files thru iPhone or Ipad.

Do you have Excel installed on your iPad and iPhone? https://itunes.apple.com/us/app/microsoft-excel/id586683407?mt=8

Unable to use Boldt .pst files

Similar Messages

Maybe you are looking for