Unable to use 'copy' feature with registered version of quicktime pro.

Hi.
I have a registered version of Quicktime pro (7.1.6), and i am unable to use the copy feature. I captured several videos from work using a windows box and an application whose name escapes me at the moment. Due to the windows app being garbage, i was only able to capture in MPEG1 format (MPEG2 caused the app to crash, of course). I have brought the files home and am now unable to copy selections of it for exporting into smaller files. I can highlight lengths of the video (no audio, just video) but the 'copy' feature is grayed out still. Any ideas on what is causing this? The video format is as follows:
MPEG1 Muxed, 640 x 480
FPS: 29.97
Data rate: 4066.42 kbits/sec
I'm running 10.3.9, but have also had no success on a 10.4 macmini, so the OS doesn't seem to be the issue.
I'm trying to get this video into imovie, but since it's over 600 megs, imovie cops out after a few hours and says it can't import it.
Help?

Not all multiplexed videos come with AC3. They don't have to have audio in the first place. Some of them come with Linear PCM, which is the case for iDVD's VOB files, and MP2. If a multiplexed video is equipped with AC3, you are right, and the resulting modified sub-clip won't contain audio. But if it's Linear PCM or MP2, the edited sub-clip will contain audio.
I'm finished with this case.
Message was edited by: Horror in Oklahoma

Similar Messages

  • When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

    When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
    == This happened ==
    Every time Firefox opened

    try
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How can i use 3D Features with 256 VRAM

    How can i use 3D Features with 256 VRAM

    Well, in theory you *could* install Photoshop CS6 version 13.0 and not update it.
    Is your video card replaceable?  They don't cost that much.
    -Noel

  • I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.

    I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.  Apparently I cannot downgrade to iOS 5 on my iPhone. Please tell me I don't have to pay anything to be able to use my products......

    Which version of iTunes?
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    Unless this is a new iPhone 5 I believe the older ones will work with iOS6 and iTunes 10.6.3.  If it won't, you will need to upgrade operating system version.

  • I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

  • How to use track effects with new version of GarageBand

    In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks.  Each track had an area containing its set of effects that were either activated or deactivated.  With this removed, i am not sure how to add those same kind of effects.  I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc.  I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

    zachseiden wrote:
    How to use track effects with new version of GarageBand
    this may help:
    http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I am unable to use my keyboard with out a delay, how do I fix this

    I am unable to use my keaboard with out a delay. How do I fix this?

    when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    The Adobe auto updater is pretty decent in CS6.  Just go to the Photoshop Help menu > Updates.
    You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available.

  • Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    I can't help you with a direct answer.  For third-party devices you should contact the vendor (Vodafone). 
    If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

  • Can you use the newest version of quicktime pro 7 with a mac osx 10.4

    can you use the newest version of quicktime pro 7 with a mac osx 10.4?

    No. The newest you can is version 7.6.4.
    (58439)

  • "You cannot use this application with this version of OS X"

    Hi,
    I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
    Thanks,
    Ken

    When you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
    http://discussions.apple.com/thread.jspa?messageID=5730491
    Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
    Francine
    Francine
    Schwieder

  • SAP CE 7.2 works fine is it possible to use sap gui with this version ?

    Hello Dears,
    Just installed CE7.2,
    Very easy install thanks for SAP !!!
    Is it possible to use sap gui with this version ?
    I'm trying to use Sap Gui 7100.3.11.1042 but can't get the prompt.
    Thanks for you help.
    Olivier

    Hello,
    So I tried to find the right software but I found only B1DESetup_2.1.zip.
    https://downloads.sdn.sap.com/BusinessOne/B1DESetup_2.1.zip
    Do you have any idea about the right link to download or this is the right file ?
    Thanks
    Olivier

  • I am unable to use airdrop between my 6 plus and MacBook Pro (13-inch, Late 2011) running yosemite.any solutions? thank you

    i am unable to use airdrop between my 6 plus and MacBook Pro (13-inch, Late 2011) running yosemite.any solutions? thank you

    There aren’t any. AirDrop between the platforms requires that the Mac support Bluetooth 4.0, which wasn’t introduced to them until the 2012 models.
    (118296)

  • Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?

    Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?
    Mike T.

    It is strange. I thought 10.x might be the more recent but it also locked up when I tried to the web export. I ran into the no autoplay issue with the webpage so I'll need to look elsewhere to replace a Flash gallery... oh well. Looks like there are probably JS option that might work.
    Thanks.

  • Help with Automator Script for QuickTime Pro Movie Conversion from Vado

    All my videos from my Creative Vado do not show up in iMovie 09 initially on import. By trial and error, I have discovered that the old version of QuickTime Pro 7 ($29.95) will convert them to .mov files that can be seen by iMovie 09 once the converted videos are imported back into iPhoto.
    I am (very) new to mac things, and it looks like in theory I could use Automator to handle to conversion process, and perhaps even the re-import into iPhoto. Does anyone have any suggestions on how to go about this? Where would be a good site to post this as a project that I could pay some one to help me, provide an automator script/workflow?
    Are any other solutions available? Buy Final Cut etc?
    PS (Rant): One of the reasons I bought a MacBook Pro and iLife was to take advantage of what I thought was supposed to be Apple's superior multimedia handling. It seems ludicrous to me that with a MacBook Pro running the latest software (10.6.4), and using the latest versions of iLife, I'd have to buy an old version of QuickTime to convert my videos so that I could manipulate them in iMovie. Sigh.

    MPeg Stram clip will export files which are compatible with iMovie '09. It (iMovie )can import the following.
    DV
    AIC
    Motion-JPEG
    Photo-JPEG
    MPEG-4 (Supported profiles)
    H.264 (Supported profiles)
    Apple Animation (Movie '09 only)
    Apple Video (iMovie '09 only)
    iMovie '08/'09 will not accept files containing extraneous data tracks such as:
    'Tween
    Text
    Chapter
    Closed Caption
    Secondary audio such as AC3
    etc.
    iMovie '08/'09 Will not accept files that rely on proprietary/third-party components such as
    DivX
    WMV
    XviD
    etc.

Maybe you are looking for