Unable to use keyboard without Caps Lock on

Hi Guys, I gave my keyboard a little bit of a clean the other day (with relevant wipes) and since then my keyboard is not functioning correctly.  It did turn itself on once or twice during the process, so I have clearly hit something I shouldn't have
The problem I have is that I can't use the keyboard without enabling the CAPS Lock.  Without using the CAPS Lock pressing random keys, produces random effects (mainly functional things) and with the CAPS LOCK on I can type normally, just all in caps (for this I am using my desktop!)
Troubleshooting to date:-
Accessibility => Mouse & Trackpad => Enable Mouse Keys (off) always has been
Accessibilty => Keyboard Preferences => Short Cuts => Restored to Default
Accessibilty => Keyboard Preferences => Input Sources => British
Accessibilty => Keyboard Preferences => Modifier Keys => Restored to Default
I have a setup another user account but the problem persists in all accounts
I have tried other applications but the problem is replicated
I have rebooted several times to no effect
OSX 10.9 (all updates up to date)
Any help would be greatly appreciated.
Thanks in advance.
Oh additionally the track pad seems to be doing slighly random things ie standard run click actually brings up sub menus!

Since no one else is jumping it I’ll suggest the general cures of
SMC reset
http://support.apple.com/kb/HT3964
and PRAM reset
http://support.apple.com/kb/PH4405
You have tried quite a few cures so if these don’t work take it to an Apple Genius Bar for a free diagnosis and estimate of repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .

Similar Messages

  • Cannot use shift S without caps lock

    I am using an imac,
      version 10.6.8,
      Model Identifier:          iMac10,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
    The s key works in lower case, but only if I use the caps lock, can I get the upper case S to work.
    The shift key will work with all other keys.
    This is the keyboard that came with my computer, alumni wireless keyboard.
    I have installed a different wireless keyboard and the same thing is occuring, so I know it is not the keyboard,
    This only started happening after I had my seagate harddrive replaced due to a correct drive.
    any suggestions? Thanks in adavance.

    The answard was found in the archives,
    thank you Niel:
    Niel
    Re: Key on keyboard not working but only on my computer 
    Aug 24, 2006 9:39 AM (in response to Canadian___gal)
    Open the Speech pane of System Preferences and check what the Speech and Listening keys are; if either of these has become set to the s key, change the setting. (15536) 
    iMac DV 45

  • Wired keyboard issues-caps lock won't turn off and other keys do not type

    I sat down today to use my May, 2010 iMac.  Fully up to date with Lion.
    I am using a WIRED keyboard. 
    The caps lock key is permanently on and the remaining keys when pressed do nothing.  They do not work.  You can press the keys down but they don't type any letters or symbols of any kind.
    I cannot log in because I can't type my password as the keys don't work.
    I can't do a PRAM reset because the  P and R keys and others don't work.
    I don't know what an SMC reset is but I can't do that either because the keys don't work.
    Why would a keyboard stop functioning?  Yesterday, it was just fine.  Now it doesn't work. 
    What causes the caps lock key to stay on?
    I have unplugged the keyboard etc, but nothing changed. 
    Doesn't anyone know how to correct this problem?  Do I just need to buy a new keyboard? 
    I called Apple but they were closed. 

    Please read teh directions for an SMC reset:
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Apple AL Bluetooth Keyboard - Tab, Caps Lock, Function and Control keys just stopped working

    Hi All -
    All of a sudden I get on my baby, 27" iMac OSX 10.6 and the some keys on the bluetooth keyboard do not work. Specifially the Tab, Caps Lock, Function and Control keys. I'm fine with the caps lock gone (why is it there?) but the others are useful.
    I've searched all over for a solution but I haven't found one. Tried to upgrade the firmware which is fine, reset the PRAM done, checked the speech per apple support nadda.
    Please help.
    Thanks
    -M

    Hi
    Go to System preferances > Universal Access > Mouse or Mousie and trackpad > and turn your Mouse keys off.
    Then disconnect and reconnect your keyboard.
    Note that you don't open your mouse under hardware in System Preferances, this is for a whole different group of settings
    Hope This helps

  • Searching Safari 6.1 with/without caps lock on

    Searching Safari 6.1 using the search field at the top of the page gives more restricted suggestions based on history if the caps lock is on vs. the caps lock being off.  This didn't happen in previous versions of Safari.  It also happens in the latest version of Safari that comes with Mavericks as I was able to demonstrate it at an Apple store.  Is there a workaround or preference to choose other than keeping caps lock off ?

    Sorry, need to make this clearer.  If you have discussions.apple.com in your history and start entering this to the search field with caps lock on, it will not populate the search field automatically.  If the caps lock is off, it will.

  • Apple Keyboard: Tab, Caps Lock, Tilde and Esc not working.

    Yesterday I turned on my mac and was filling out some form and discovered whilst trying to go the next field that my tab button wasn't working. My tilde, esc and caps lock buttons won't work either (light comes on when I start up and pull out and plug keyboard back into USB port). It's strange that they're all tucked up in that left hand corner.
    Has anyone else come across the problem or have any thoughts about curing the problem?
    Cheers,
    Mike

    If MGW's suggestions do not work, then check out the following as your keyboard may be dirty:
    Disassemble a Apple Pro (transparent) keyboard to clean it
    http://technology.niagarac.on.ca/people/bgracey/prokeyboardrepair.html
    http://www.tuaw.com/2006/11/17/how-to-clean-your-apple-keyboard/
    http://www.associatedcontent.com/article/367670/cleaningthe_apple_pro_keyboardremove.html?cat=59

  • Apple wireless keyboard.  Caps Lock light quit working.

    I know it's a small thing but all of a sudden the Caps Lock light quit working.  A real pain for entering passwordssince you can't see if their in caps or not.  Can this be fixed?

    What does resetting the PRAM mean? How is that done?
    <http://support.apple.com/kb/PH11243>
    It works best with a USB keyboard.  With a wireless keyboard, try pressing the keys just after the startup BOING.
    You will need to reset the "Startup Disk" system preference after a PRAM reset.

  • Apple Bluetooth Keyboard -- remap caps lock?

    Howdy,
    I've got Apples aluminum bluetooth keyboard connected to my iPad ("new", aka iPad 3), and
    I would like to map the caps-lock key to control, like you can do with any Mac.
    I can't find the setting; is there one, and how do I get to it?
    Thanks,
    Tim

    Hi,
    Unfortunately there is no way to change the setting of a keyboard currently connected to an iPad, as done on a Mac. All the keys are permanent.

  • Minor Keyboard Issue: Caps Lock and Num Lock indicator lights are wrong.

    For a few hours, I have been having a small issue with my PowerBook G4 keyboard. The green indicator lights for Number Lock and Caps Lock are indicating incorrectly.
    Thus, in order to be able to type lowercase, I must keep the Caps Lock key light on, which subtly annoys the **** out of me [Apple edited out "heck" ]. Num Lock is worse, because I can actually see it; it isn't usually covered by my left hand. Very distracting.
    Rebooting did not resolve this issue. Neither did monkeying with the Keyboard system preferences. If I could just turn the lights off altogether that would be fine with me.
    This is a recent 15-inch PowerBook G4 1.67 Ghz, with the dual-level dvd burner and (I believe) the internal keyboard is USB, now, instead of ADB as (I believe) many of the older ones had been, so many of those hacks like fkeys and Ucontrol and so on are not options (I believe).
    Any ideas? Thanks,
    Nick
    PowerBook G4   Mac OS X (10.4.4)   15 inch, USB keyboard (I believe).
    PowerBook G4   Mac OS X (10.4.4)   15 inch
    PowerBook G4   Mac OS X (10.4.4)   15 inch
    PowerBook G4   Mac OS X (10.4.4)   15 inch

    I finally got it working again, I took the power out and the battery out while it was running. I made sure there were no USB/FireWire/PC-Card stuff connected when I did this. When it booted back up it was normal again.
    I also figured it happened because I put in a kyocera EVDO pc card into the laptop while it was in sleep. When it woke back up it went nuts and had to be rebooted several times.

  • I AM USING KEYBOARD WITHOUT MOUSE AND LETTER "H" NOT WORKING

    I AM USING KEYBOARD WITH NO MOUSE AND LETTER "H" NOT WORKING
    DOES SOMEONE KNOWS WHAT CAN BE DONE.
    THANK YOU
    MARIA

    I saw this issue before where cause was a bad preference for another application.
    When I had the "can't type Shift H" problem in Entourage, it was a corrupt preference for FlightCheck, a preflighting program I use in conjuction with QuarkXPress that was the culprit.
    First determine if the problem is in your User’s folder by creating a new User in System Preferences and test for the problem there. If it goes away then you know the problem is in your User’s folder.
    Use new User to test for problems
    Let us know the results

  • HT2534 I am unable to use iTunes without a credit card!!! Help

    Hi unable to use iTunes ! option of no credit card does not exist Plese help

    See this -> http://support.apple.com/kb/TS5366

  • Unable to know about the caps lock key in ubuntu

    hi, i have thinkpad edge 14 and have installed ubuntu 10.10 on it ,but can't get the display property which shows whether the Caps lock key is on or off. Is there such feature ?thanks

    epretorious wrote:
    Any idea how to display the status of the CAPS LOCK key on Debian? (i.e., The LOCK-KEYS-APPLET isn't in the Debian repositories.)
    CORRECTION: The LOCK-KEYS-APPLET is in the Debian Squeeze repositories but is not in the Debian Wheezy repositories.
    Eric Pretorious
    Truckee, CA

  • Unable to use keyboard (return or enter) to select install

    Hi All;
    am attempting to install XP and when I get to the screen with 3 selections: 1) press r to repair; use f3 to I don't recall or press enter to install XP I get no input through the keyboard, I am using an I-Mac with the standard usb keyboard, have been unable to find any tips on apple site.
    Thanks, Wiki

    Since no one else is jumping it I’ll suggest the general cures of
    SMC reset
    http://support.apple.com/kb/HT3964
    and PRAM reset
    http://support.apple.com/kb/PH4405
    You have tried quite a few cures so if these don’t work take it to an Apple Genius Bar for a free diagnosis and estimate of repairs.
    Genius reservation http://www.apple.com/retail/geniusbar/ .

  • Satellite C50-A-157 - Unable to use touchpad without holding left button

    I know very little about my Satellite C50-A-157 . Run on Windows 8. I am main /admin user and all of a sudden I am unable to move the mouse/cursor.. only way it seems to let me, is if I hold the left hand botton (bottom of mouse pad) down at same time, then it moves around.
    But then high-lights everything.
    I have tried pressing FN+F5 at same time (nothing happens) even taken battery out of back (again does not solve issue) the MOuse/arrow is just frozen on the page.. this does not happen in my partners profile, (he is another user) the mouse seems to work fine..
    I thought it was that the mouse pad, had worn out (as is shiny now) but this does not explain why it only happens under my profile/user, not his?
    If anyone can offer any help, much appreciated... I only stumbled across the fact, it lets me use it (if I hold in left button at same time)
    Also have tried the 'Sticky keys' shift x5, again this does not do anything or clear this problem.
    And have gone into control panel usinw Windows+ X and gone into troubleshooting, again, not solved the problem.

    .. this does not happen in my partners profile, (he is another user) the mouse seems to work fine..
    Since the touchpad is still working using another user profile, I guess there must be only some software conflict.
    Usually you can enable or disable the touchpad pressing F5 (or FN+F5) but you already tried this combination and this did not enable the touchpad…
    So from my point of few you should simple uninstall the touchpad driver and after you have downloaded the newest touchpad driver package from Toshiba EU driver page, unzip the package and perform new touchpad driver installation…
    After the installation has been finished, restart the notebook…
    Good luck

  • K8N Neo3 Unable to use keyboard in BIOS setup

    I have a K8N Neo3 motherboard
    System info:
    1 gig memory
    AGP GeForce FX 5500 128 MB DDR AGP 8X
    AMD Sempron 3000+
    I start up the system and I hit del key to get into the bios setup, the BIOS setup screen appears but when I hit enter key on my keyboard nothing happens, I tried several other keyboards with the same results.  If I do not hit the del key at start up it asks me to hit the F1 key which I do and I get no response???
    The memory and CPU info comes up at boot and no problem there??
    Please advise, many thanks

    Quote from: BG84 on 17-July-06, 05:40:09
    try to reset cmos.remove baterry and leave for 10min, while reseting with the jumper or button
    Many thanks for the help, your procedure that you suggested did work for me and now I was able to setup my bios.
    Many thanks once again.

Maybe you are looking for

  • Qosmio G40: No sound on Windows Media player under Vista

    Hi, the last week or so the sound has gone on my Windows Media player, but only on my Tv Tuner and DVD, the files from the hard drive are not affected. Everything was ok at the start but now it does even make the startup sound. I have tried configuri

  • Multiple r/3  status monitoring

    Hi Folks, We have the below situation: Ours is a Global/Local data set up. XI takes care of distribution of local data to various systems . During this distribution, is it possible to capture the status of the distribution in MDM [assuming  there is

  • -18370 error, scc system has not been initialized

    Hi, I'm getting the error in the subject when choosing the menu source control/scc provider options.  I am using perforce, and I have a workspace open with projects and files.  Also, when going to configure/station options/source control, I do not se

  • How to install minilyrics in Mac OS x 10.7?

    Hi Guys,   Anyone can tell  How to install minilyrics in Mac OS x 10.7?Or Any player for mp3 +lyrics.

  • Count Record in RIN1 table

    Hi can anybody help me with my query. I want count the Baseref field from RIN1 table, want to Count DocEntry field that have greater to 1 in the Baseref field. This query below is running : SELECT BaseRef,        COUNT(DocEntry) FROM (SELECT   dbo.RI