Unable to Use License Key

Hi
I downloaded Sneak Preview SAP NetWeaver 04s - Full ABAP Edition with Web Dynpro for ABAP.
I am able to set up the same and i am able to logon to the NSP system.
But when i am trying to use my license key which i got from SDN it is saying the invalid license key. I tried with replaceing ZERO with "O" still it is showing the same. Could any body help me in this regard
The follwing message i got from the SDN
Dear Mr BOGA UMASHANKAR, thank you for your interest in SAP solutions.
You requested an evaluation license for the following system: SAP System
ID: NSP;
Operating System: Windows
SAP Release: 6.40;
Database: MaxDB
You have already registered with the evaluation and your license key is still valid. If you want to change your registration data, please reply to this email and specify your needs. In case that you have lost your license key, here is your current evaluation data:
Your Hardware key      : P0794904372
Your License Key       : OMN2Z5913D2JA8F48KXBP84G License Expiration date: 20060523 SID                    : NSP
Installation-Nr.       : DEMOSYSTEM
Some useful hints: - The license key depends on your hardware. If you have changed the hardware setup or if you want to install the demo on another hardware, you have to request a new license using the new hardware key. - You can obtain your current hardware key and change/update your license without reinstalling the demo at any time. To do that, use the "saplicense" executeable located in C:\BSP with the -get and -install switches - If your license will not work, check that the characters match in case and make sure you differ between zero and the letter "O". Have fun!

to install the license key you should have logged on the windows system with user id nspadm.
Regards
Raja
please close your previous thread
Problem after installing SAPNW2004sSneakPreviewABAP

Similar Messages

Unable to use backspace key in SQL Developer

hi
I am unable to use backspace or arrow keys in SQL worksheet using SQL developer.
Can any one help me out...?
You can also contact me on [email protected]
regards
Ahsan

Hi,
to give a worst case. I downloaded actual releases for JDeveloper and SQLDeveloper for MacOS and on my Mac this case is totally unsolved. I tried to check he settings within the preferences.xml but no "googled" solution works to get SPACE and BACKSPACE to work.
I will try the older versions.
I previously used my migrated versions from my older Linux system and everything worked fine. Installing the integrated MacOS versions is fine but using the linux way (using the shell command) seems to work. Hope this will help to find the bug within the packages.
Bye,
Holger

Unable to use product key of windows 8 for upgrading windows 10

Hello, My laptop is Pavillion brought in India, model HP2000-2202TV with windows 8 installed,I am upgrading my windows to windows 10 i am unable to use the product key of windows 8 to upgrade windows 10.can you please suggest me what to do Thank youBhavana Gopal

cuteanava wrote:
forgot to mention, i did a fromat of drives due to some virus issues before installing it.Hi, That is a clean install that why it asks for the key. You can't clean install without a Windows 10 key. Please check the following answer: http://windows.microsoft.com/en-us/windows-10/why-activate-windows-10 Regards.

Unable to use volume key

N95- cannot increase the volume using the volume key.is there any other way i can increase the volume of music on music player.
Message Edited by ashtraykid on 12-Aug-2008 01:18 PM

Have you tried using the volume control on the remote that's supplied with the N95?
If your volume key no longer works you should take it to a nokia care point for repair.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Unable to use option key on startup

My Macbook Pro is running Yosemite (version 10.10) and runs Windows 7 through Boot Camp.   Until now I have been able to hold down the Option key on startup to enable me to select OS X or Windows.   Starting today the option key does not make any difference and the computer always boots straight into Yosemite.
To eliminate a couple of possibilities:
1.   When in Yosemite I can use the Keyboard Viewer to show that the Option key does still work.
2.   If I go into settings I can select the startup disk as the Windows partition and then the computer always starts in Windows.   This shows that the Windows partition is still there and the Windows setup works.
Why can I not use the option key to allow me to select which operating system to use?

Sounds like he set the Open Firmware password - doing so will (intentionally) prevent these things. The good news is that you can undo this with some effort.
Defeating the OF password:
1) Change the amount of RAM in the machine.
2) There are programs out there that will (reportedly) extract the OF password allowing you access.
3) Resetting the PRAM 3x in a row and rebooting is supposed to do it as well. (Warning this information has been considered "secret" at times.)
Hope that helps. Searching for Open Firmware Password will give you way more information if you want it.
=Tod
G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz

Unable to use "Option" key or "Target" ?

I am attempting to re-install the OS on an X Server, but it seems that the previous techco has locked the server in some way. When I boot up with either the "Option" or "C" key pressed I get a light "Blue" screen with a "Padlock & a box" to apparently enter a Password. I don't have the Password & the techco in question left the schools employ in a disagreeable manner. I've re-initialized the hard drive & reset the PMU. Any other Ideas?
XServer Mac OS X (10.4.7)

Sounds like he set the Open Firmware password - doing so will (intentionally) prevent these things. The good news is that you can undo this with some effort.
Defeating the OF password:
1) Change the amount of RAM in the machine.
2) There are programs out there that will (reportedly) extract the OF password allowing you access.
3) Resetting the PRAM 3x in a row and rebooting is supposed to do it as well. (Warning this information has been considered "secret" at times.)
Hope that helps. Searching for Open Firmware Password will give you way more information if you want it.
=Tod
G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz

Unable to use certain keys

As of a little while ago i for some reason can't use my escape button, to exit MSN convos, etc, and also can't use my tab.. anyone know how to fix this?

Seems like a strange thing. Have you checked for a clash with things like Speech in System Preferences? Escape can be used to make your iMac listen to you speaking for example, and this may well override MSN.
Karn.

FMS license key

Hi
Can we use same license key for more than one FMS server? If we use one key for other server then what will be the effect on the FMS.
Also one more think can we use one license key of one version to other version? For example can we use license key of FMS 3.0 for FMS 3.5.
How to upgrade from FMS 2.0.5 to FMS 3.0 and may we know the cost of upgradation?
Thanks

Can we use same license key for more than one FMS server? - NO - its against EULA
Also one more think can we use one license key of one version to other version - NO - license keys are specific to versions
How to upgrade from FMS 2.0.5 to FMS 3.0 and may we know the cost of upgradation? - You need to get upgrade key + install newer version whichever you want to upgrade to. As far as cost is concerned - i think you can check that on Adobe site. I am not sure whether site will show upgrade from 2.0.5 to 3.0 as its little older version upgrade.

I purchased "Contacts to Excel..." from Amaira Soft - but no License Key provided - Error Id: 30511

I have just purchased "Contacts to Excel - Professional Edition. Backup and Restore Contacts from Excel" from Amaira Soft, but was informed by my Blackberry that it was "unable to obtain license key" and that I should contact www.blackberry.com/appworld/support quoting Error Id 30511. I then received an e-mail from [email protected] saying that I have been charged for the software! When I visited the Balckberry website for support and any listing under Error Id 30511 I found;
"Cause:
The dynamic license key is not being generated for this application.
Resolution:
Contact the software vendor to have a license key generated."
I then tried to contact [email protected] to obtain a license key, however the link does not work. Has anyone had this problem? How can I get my license key? More importantly how can Blackberry charge me for an incomplete sale?
stormcut

stormcut wrote:
I then tried to contact [email protected] to obtain a license key, however the link does not work. Has anyone had this problem? How can I get my license key? More importantly how can Blackberry charge me for an incomplete sale?
What link does not work?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

License key damaged

I cannot open my books on my PC but still can on my laptop. Message "unable to open' license key damaged. I uninstalled and downloaded again with same message. Help

Hi, this is April 19th and I am having that problem to. I turned in my computer to a shop to get repaired. I have four books I paid over Thirty dollars a piece to acquire and I CAN'T ACCESS THEM. How does one go about repairing the license key?
I notice that the previous guy posted on 2 April. Are you going to help us here?

Unable to use the keyboard in XP keys work OK when boot into dos

Unable to use the keyboard in XP. It was working for over a year OK with XP running
keys work OK when I install win98 or use a dos boot disk.
If I try to reinstall XP I can not use any of keys to input anything.
Return
Esc
CapsLock
ctrl-alt-del.
NO KEYS WORK AT ALL OTHER THAN
ë à
I did an upgrade from win98 but that did not work.
Any ideas

billwyatt, welcome to the forum,
I think you forgot to mention which ThinkPad you have. It would be even better if you could post the Type and Model Number as this will help members to hopefully help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Unable to use back, forward or reload key.

When I moved to another page I am unable to use either the back, forward or reload keys. They are greyed out as if this is the first page I have viewed and therefore have no history.

Yeah, just a standard motorola cable modem, the airport is doing all of the routing.
I don't know what changed last night, but today I'm able to access my drive remotely over Back to My Mac without problems. I initially received a "SharePointBrowser::handleOpenCallBack returned 22" in my Console (as opposed to 64 which I received yesterday), but I clicked "Connect As..." and re-authenticated and everything magically started working.
So the only things I changed last night were: a) I disabled the "Enable default host" option that I was using previously but now no longer need, and b) I moved the USB harddrive over to my mac to verify partitioning options, and in the process also renamed my two partitions before moving it back to the Airport.
Dunno if either of these changes did the trick, but everything seems to be working fine today. Thanks for the help, dchao99!
Mike

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

Unable to enter MOSS 2007 License Key after SP2 upgrade - trial period about to expire

We are unable to enter the license key as stated in the title. The field does not allow any input. Central Admin shows that our trial period is about to expire very soon.
Our environment is MOSS 2007 (Office Sharepoint Server with Enterprise Client Access License) on Server 2003. SP2 is installed, the August 2011 CU (KB2553020) is installed, and the Microsoft suggested fix for this known problem is also installed (KB971620).
ie. Product expiration date is activated incorrectly. Since those fixes do not work, we are left with the manual entry of the license key. However, that also does not work.
Still, it shows that the trial period is about to expire. Apparently this fix is also included in any of the CU's after June 2009.
We have a valid license key for the Enterprise version and have the Enterprise client licenses as well. The License Synchronizer Job has succeeded.
I have searched the forum and have not seen a answer that resolves this issue.
Does anyone know what to try next ? We are running out of time.
Thanks in advance,
Peter
<></>
<> </>

Hi,
As far as I know, this issue occurs because the installation of the 2007 Microsoft Office SP2 activates the production expiration data incorrectly.
To resolve this issue, please install one of the following updates according to the following links:
Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition package now. (http://download.microsoft.com/download/2/F/5/2F51AB71-1325-49D2-9CB9-18DEC4780E99/office2007-kb971620-fullfile-x86-glb.exe)
Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition package now. (http://download.microsoft.com/download/5/B/B/5BBD34A9-C528-42B0-8A5F-9A8997B25C32/office2007-kb971620-fullfile-x64-glb.exe)
For more information about this issue, see
http://support.microsoft.com/kb/971620
After you install one of these updates, you do not have to redeploy the service pack. For information about how to deploy this update, please see the Microsoft TechNet article on how to deploy server updates:
http://technet.microsoft.com/en-us/library/cc263467.aspx
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rock Wang TechNet Community Support

License Key When Using Executable Windows Installer

Post Author: Robert Flaherty
CA Forum: Deployment
When using the executable Windows Installer for installing the Crystal 2008 runtime files on client PC, do you need to enter your license key? If you leave the field blank, what happens?

It sounds like the key you are trying to use is for setting up a KMS, not for activating a windows server station.
If you want to use a KMS, use the following key:
http://technet.microsoft.com/en-us/library/jj612867.aspx
Also be sure to create the service record for the KMS in DNS:
http://technet.microsoft.com/en-us/library/ff793405.aspx

Unable to Use License Key

Similar Messages

Maybe you are looking for