Unable to use my webcam with Flash Player

Hello,
i can't stream a video with my webcam....i stream music shows with my webcam by "ustream" very often but now the video screen is still grey..the camera is in the flash player settings deactivited and if i activate the cam nothing change...i will add a screenshot to show you what i mean because my english is not very good i can add the ustream websites in the global settings to activate the cam allways but after restart my pc the cam is deactivated again...my webcam work with skype fine so it must be a problem with the flash player..i have deinstalled the flash player and tried out other version but nothing help on the screen you see that i can activate the cam..when the cam is activated nothing change and the screen is always grey...
windows 7
64bit
flash player: 11.6, 11.5, 10.3 (allways the same problem)

Similar Messages

Massive problems with Flash player

I think it started about last week, after an update: every time I watch a video (whether it be on YouTube or elsewhere) that is longer than 5 minutes (and often shorter), the video starts stuttering after a few minutes. First the framerate slows down to about 1 frame every 3-4 seconds before grinding to a complete halt, almost freezing all of my computer in the process until I close the tab, although sometimes a full reboot is needed. The audio largely remains unaffected.
When I upgraded the Flash player, the problems persisted. Turning off hardware acceleration seems to have helped but I am not sure--I have had some audio problems since disabling this. It's odd and really very frustrating as I have a very decent video card. What is going on here? How can this be fixed? What do I miss out on by disabling hardware acceleration?
I am currently using Firefox 5 with Flash player 10,3,181,34 on Windows Vista 32bit.

Hi, if you have Flash Player installed correctly and it's working but having issues with video playback, take a look at what some of the reasons can be.
http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=74662
http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=56116
See if those are helpful.
eidnolb

Is anyone else having trouble with Flash Player in Mac OS X Yosemite using Safari.

I can't install, it gets to 30% downloading and stops. I deleted it completely from my computer to no avail, same problem happened when I tried a clean install

madgaxed *Is anyone else having trouble with Flash Player in Mac OS X
Yosemite using Safari.*
created by sofd5928497 <https://forums.adobe.com/people/sofd5928497>
in *Installing
Flash Player* - View the full discussion
<https://forums.adobe.com/message/7325446#7325446>
I have the same problem!!!
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7325446#7325446 and clicking ‘Correct’
below the answer
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
https://forums.adobe.com/message/7325446#7325446]
Please note that the Adobe Forums do not accept email attachments. If you
want to embed an image in your message please visit the thread in the forum
and click the camera icon:https://forums.adobe.com/message/7325446#7325446
To unsubscribe from this thread, please visit the message page at [
https://forums.adobe.com/message/7325446#7325446], click "Following" at the
top right, & "Stop Following"
Start a new discussion in Installing Flash Player by email
<[email protected].hosted.jivesoftware.com>
or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 36>
For more information about maintaining your forum email notifications
please go tohttps://forums.adobe.com/thread
<https://forums.adobe.com/thread/1516624>
22 марта 2015 04:07 пользователь "sofd5928497" <[email protected]>
написал:
Is anyone else having trouble with Flash Player in Mac OS X Yosemite
using Safari. created by sofd5928497
<https://forums.adobe.com/people/sofd5928497> in Installing Flash Player
- View the full discussion
<https://forums.adobe.com/message/7325446#7325446>

Can I use 640 x 360 (16:9 ratio) FLVs in CP 5 with Flash Player 9

Can I use 640 x 360 (16:9 ratio) FLVs in CP 5 with Flash Player 9 (I can't test now, because I am using FP 10)
I think my client was given some bad information and I'm trying to clarify the correct facts.
I am working on a Captivate 5 project that uses a lot of FLV clips. These were prepared by someone else. The original video was edited to HDV format 1440 x 1080 (16:9)
Someone (a third party Adobe Sales Vendor) recommended to the video producer that in order to display in an optimal way in Captivate, that the FLVs should be transcoded to 640 x 480 (4:3) because of compatibility with "older Flash Player and bandwidth" considerations. However, that is not the case. Our audience can live with Flash Player 9+ and has reasonably good broadband.
The FLV clips are never shown full screen, but surrounded by typical text captions and images within a Captivate slide. So, I don't see why the video would not be perfectly fine at 16:9 (640 x 360.)
Further, the FLV (using Slide Video) would be resized to 400 x 300 to fit into the context of the surrounding captions on the slide.
So there some technical reason why I could not use 16:9 ratio at 640 x 360 having to do with older versions of the Flash Player?
Thanks as always.

Its recommended not to resize the FLV video inside Captivate. Resizing can lead to video quality loss and performance drop in flash player.
regards,
Mukul

Camera just up and stopped working with flash player. SUUUUPER annoying. Any ideas?

Hi:
Windows XP SP3 32bit, latest updates applied
Firefox 3.6.6 (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 ( .NET CLR 3.5.30729; .NET4.0E))
IE 8.0.6001.18702
Flash Player 10,1,53,64
HP EliteBook 8530w with built-in HP camera (brand spankin' new).
So Flash Player today decided it doesn't want to work with my webcam. I have pulled my hair out trying to figure out what the problem is. The camera works fine with other video camera software, such as Adobe Flash Live Encoder 3.1, for example, or the various Microsoft cam tools. But Flash Player just won't see it. When I visit a website that uses the camera through flash, all I get is a black box. I never get the privacy screen that asks me if I would like to allow the site temporary access to my camera.If i go into my settings, and go to the camera tab, it shows my camera device in the dropdown box. But you know how if you double-click the little box under the dropdown, it should activate your camera and display a little video inside that box? That doesn't work for me. All I get is this:
It doesn't matter if I use FF or IE. I've re-installed Flash Player, both the FF version and the Ax version. To no avail. I've logged into my computer as a different user, because hell maybe it's some weird dumb thing in the Flash Player cache or something. Nope.
Now here's the super, super, super annoying part: I just recently moved to this laptop and one of the things I was looking forward to was a computer where my webcam would FINALLY work with flash player again. Yes, that's right: my old computer had this exact same problem. And in both cases, at one point the camera worked with Flash player no problem, and then at some point, it just stopped working.
This makes me think, of course, that the problem is some nefarious piece of software I've installed, but I can't think of what that is. I know the camera was working with my new computer as early as last week. Recently I've installed a bunch of software, including Adobe Media Live Encoder 3.1, Flash Professional CS5, and the Adobe Connect add-in. I've uninstalled everything except CS5, because, hey, who wants to re-install that if they don't have to? I'll do that as a last result, but the guy sitting next to me has the entire CS5 suite installed and camera works fine for him with Flash Player (same exact hardware too), so I don't think it's that. Other than that, I dunno. I've got VS2008 and 2010 installed. GoToMeeting. Office. That's about it.
So. Any ideas? Any thoughts on how I could even start to debug the issue? Logging or something? Any help is much appreciated.

Yes.
Victory is mine.
VICTORY IS MINE!!!
Solution:
Go to C:\WINDOWS\system32\Macromed\Flash\mms.cfg
Set
AVHardwareDisable=1
to:
AVHardwareDisable=0
Restart your browser. Done. Camera works now.
I really want to shout this solution from the rooftops, because try Googling the solution sometime. I did. I failed. You will too. Hopefully if I use some more 18-point bold font, Google will index it faster, because that's the way it works right?
I actually had no idea that Flash Player has a folder in Windows\system32 at all, and I definitely had no idea that this file existed. I am guessing some stinking app I installed decided I needed AVHardwareDisable set to 1 for some reason (effers). I found out about the location by just lazily searching through the windows registry for "Flash Player" and eventually saw it pointing to that directory. A little more poking around and I found this file.
Those of you who actively support this forum: please keep this in the back of your mind, next time someone has audio/video input problems with Flash Player. I've found an awful lot of forum posts from people with cameras not working, and I bet a good portion of them need this fix. Reinstalling Flash Player will not fix it. Here's hoping the solution comes up in Google for the next unlucky soul.

TAB with Flash Player 9

Hi,
I am using a TAB keystroke to navigate through a series of
interactive elements. Everything seems to be working fine with
flash player 7.0 but once I upgrade to flash player 9.0 from
adobe.com, the tab functionality doesnt work.
Here to notice that the current file which is created using
FLASH 6 AS1.0 and published in FLASH 8 for FP 6 AS1.0 having this
issue. All other files which were published earlier working as
expected.
Is this any issue with FP9 or do i need to make some changes
for FP9?
Thanks in advance for any help.
-Push

I am trying to install Adobe Flash Player on a Windows
computer. I have gone through all the installations procedures
possible and still unable to install the Flash Player. What other
options are left for me ?

Multiple USB webcams in Flash Player 10

How to set up multiple USB webcams for flash player 10 on OSX Leopard? There is only one item appearing in the player's webcam list as "USB Video Class Video" although I have 3 cameras attached on my mac. (Macbook Pro 2,4 GHz Core 2 Duo)
When I use VMWare with Window XP SP3, the system detects all my webcams and I see 3 webcams in the player's list but I only get one cam's signal as clicking on each list item.

IS this what your trying to accomplish its done in flash but I am trying to figure out HOW
I am really fustrated tyring to figure out how it done.
I know it can be done I use to broadcast my cam on that website, but I want to make my own website and do it for myself. I know it flash cause when I load up the flash player on my desktop it says show. settings have the allow and deny buttons, drop down menu you select which webcam you want for which webcam is installed I can have more screen shots of what they have created many someone know how it was done.

Help with Flash Player- Not Playing

I recently went to a website where it said that i needed to
download the latest version of Flash Player. I followed the
directions and installed it, and the movie came up after
installation, but on the website it still said i needed to install
flash player again. I went through the other forum posts and tried
everything, but it still wouldn't show up. Then today i was on the
website and finally the video came up, but then when i refreshed
the page the video was gone and it again said i needed to install
the latest version of Flash Player. The video has shown up twice in
the past day, then says i need to reinstall again. I've tried
everything, but the videos just wont show up. Does anyone know how
to fix this for good?

JDB... your problems and solutions are different (and much
more complex). Read this CAREFULLY.
Printable, lovingly formatted versions of these steps, valid
as of 9/15/2007 are available. I recommend printing them and
following along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
TWO: Registry Permission Problems
We have been working on Flash Player failures caused by
Windows System Registry issues. We have not been able to determine
what’s causing these permissions to change. But that change
prevents the successful installation of Flash Player ActiveX
control (used by IE Windows).
Registry permission problems can be resolved using a tool
called SubInACL, built by Microsoft to correct system registry
issues.
Symptoms: What to look for:
1. If you install Flash Player on IE and are unable to see
Flash content on any webpage
2. After installation C:\WINDOWS\system32\Macromed\Flash
will have flash 9c.ocx in it but it failed to register
3. It appears that Flash Player installed correctly, but
unable to view Flash content
4. Flash Player works on other browsers, but NOT Internet
Explorer
5. If you are missing groups in HKEY_CLASSES_ROOT Advanced
Permissions
6. If you have run registry cleaners in the past, this may
have corrupted your system
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
For Vista
Compare your permissions with the ones in this screenshot.
http://www.supportflash.com/vista_key.png
For Window XP Pro or other flavors of XP
Compare your permissions with the ones in this document
“Troubleshooting system registry issues that prevent Flash
Player installation” (scroll down to the bottom of page).
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400116
Notice any major differences, missing groups, incorrect
permissions?
How can you repair the System Registry, what's the fix
Download SubInACL from Microsoft to fix permission issues
that prevent the Flash Player Installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
NOTE: The Microsoft version of the .cmd script run by
SubInACL is not be run on any XP version other than Pro. HOWEVER,
the Adobe .cmd script in the above technote is tested safe for ALL
VERSIONS OF XP!!!
If you have a Windows System Registry permission issue that
sounds like the one described above, SubINACL may be the solution.
Please note that if you have this issue on multiple accounts on one
machine you’ll need to fix each machine individually.

White/Black Screen Problems With Flash Player

I have had a problem with flash player since updating it in November. Certain websites such as YouTube and Worldstarhiphop work perfectly while other websites such as Facebook produce black or white screens when trying to play videos. If you attempt to play a video on a website in which you get the black or white screen, you can still hear the audio. While that is annoying it is only a minor inconvenience, the biggest problem is with other websites that require flash. I currently want to run an internet speed test on my computer but I can not find a website that my flash player will work with. The weird thing is that the animation at (http://helpx.adobe.com/flash-player.html) plays correctly.
To fix the problem, I have attempted to uninstall and reinstall flash player. I have also tried changing the settings, enabling/disabling hardware acceleration. I feel like I've tried just about everything and I'm running out of ideas. I currently am using flash version 12.0.0.44 through Internet Explorer 11.0.9600.16518. My computer is running on Windows 7. Does anyone have any idea's on how to fix this problem?

I am having the same problems and have tried all the posted solutions with no positive result, so far.
Similar to above… on all of the web pages on which I am unable to see the flash videos, if I click in the flash window to start the video, all I get is audio playback with a black or white screen.
However… If I move the mouse around inside the flash window, I can see that the mouse pointer still reacts wherever the video control buttons are located at the bottom (although I can’t see the buttons, themselves). And if I click the “full screen” button …. usually in the lower right… my view goes to full screen and the video appears!
I don’t know about everyone else, but my problem appears to be limited to:
Specific websites (facebook, most news websites)… I have no problem with Youtube or the Adobe Test Page.
Viewing video in the embedded flash window on the web page... Opening the video to full screen allows me to see it.
I’ve tried this on several of my problem websites with consistent “success” at viewing videos. It's an annoying solution, but at least I can see the videos.

Errors on my web site started with Flash Player Release a few days ago (Mar 28, 2012)

Hi,
I have a Flash based video player on my website. This was designed and implemented based on an article vy Lisa Larson-Kelley. It has run flawlessly for several years. But, when I installed the lastest release of Flash Player a fedw days ago (Mar 28, 2012), I am now getting really annoying issues with the Flash Video Player.
I expect that I will need to place insturctions for users on how to roll back their version of Flash Player, since this latest version is broken.
But, many of the people who visit my site are not tech oriented (they are mostly friends and family, so, I don't expect that they will really roll back their version of Flash player.
I am 100% certain the issue is the latest version of Flash, since these errors never occurred until I installed the latest version.
On my work laptop, I have an older version of Flas (10.x.x) and this probelm does not happen. On my desktop PC at home, I have an older version of Flash 11 installed, and this problem does not happen (in IE9). The version of Flash PLayer 11 where the issue does *not* occur is 11.1.102.63.
On that same desktop PC, if I use Chrome, (which automatically defaults to the latest version of Flash which is 11.2.202.228, I get the problems. So, there is no question that the issue is with the latest version of Flash and not my hardware or drivers. I get the same problems on three different computers.
My website has a username and password. If someone from Adobe wants to replicate the problem send me an e-mail and I will send you the username and password.
The videoplayer on my website is at this url: http://www.jjjhi.com/TryMakingFlashVidPlayer/VideoPlaylist.html (but, you will need the username and password).
The issue is that sometimes (not always) when you select a video to play, inistead of the video loading into the panel as it should (sized as 1025 x 578), instead, all you see is the control skin. The video begins to play, but all you get is the audio. It looks like this:
You can recover from this error by using the skin control to make the image full screen, but, the video looks poor at fulls screen, because it is created at 1024 x 578. You can then get the correct size by returning from full screen, but, I don't want the pepole who visit my cif\deo playet to have to go all through that. Especially since most won't even know enough to try making the video full screen.
This doesn't happen for every video on my web site, but, once it *does* happen once...it will happen for every video selection you make.
This is unacceptable, and it absolutely a function of Flash version 11.2.202.228.
Adobe: Please fix this bug as soon as possible.
I've implemented an HTML5 based video player and have begun populating it with mp4 versions of my video clips, but, quite honestly, the playback using HTML5 is much worse than with Flash. I encoded the clips in the HTML5 player with the same Variable Bit Rates as in the F4V clips, and, in the HTML5 player, there are missed frames, and the audio can get out of sync. So, I *want* to keep using my Flash Based video player, but...if Adobe doesn;t fix this, I will just dial down my VBR till I find one that is slow enough to play in HTML5 and ditch Flash.
My HTML5 video player is here:
http://www.jjjhi.com/TryMakingNewVideoPlayer/NewVidPlayer_option1_jth.html
(again you need the username and password to use it, send me an e-mail and I will give them to you, I just don't want to post them in an open forum).
Here is a bitmap of the page: It is quite snazzy looking and is based on an excellent class from Chris Converse at Lynda.com. But, even though it is 'snazzy looking' the HTML5 player performs poorly on an under-powered machine (like my work laptop). It uses 100% CPU and misses frames and the audio loses sync. The same videos encoded with the same VBR for Flash (F4V) play great, *except for the new issue described above!!!!)
I Adobe can fix this issue with Flash Player 11.2.202.228 ASAP, else, I will have to 'downgrade' to an HTML5 based video player, that, quite honestly does not perform as well as Flash.
If you want to reproduce the problem contact me at my e-mail address: [email protected] and I'll send you the username and password.
You can then prove that the problem does not exist with prior version of Flash player (before 11.2.202.228) but *does* exist with this latest buggy release.
Thanks,
John

Thanks.
I sent the username and PW to you and Chris.
Cheers,
John

Weird error message with flash player 10

I have some problems with some content played with flash
player 9. I get an error dialog up in firefox and it ask me to
dismiss or continue flash player 9 ?

Hi,
Are you using Afcs to build you application ? Is so, then
please us know the details of the error. This forum is for
developers using Adobe Flash Collaboration Service to build their
applications.
Thanks
Hironmay Basu

High CPU usage with flash player

hi ive just recently bought an emachines em250 netbook and when using most websites with flash it works ok normally around 30 - 40% cpu usage, however when i use itv player it increases the cpu usage to 95% meaning it runs slow. i am not running anything else in the background and when i check task manager it shows internet explorer and system idle are using all the cpu. I read that its a glith with flash player 10 and installing flash player 9 fixes the problem, but i have tried this and it doesnt. any suggestions? my operating system is windows xp.

hi ive just recently bought an emachines em250 netbook and when using most websites with flash it works ok normally around 30 - 40% cpu usage, however when i use itv player it increases the cpu usage to 95% meaning it runs slow. i am not running anything else in the background and when i check task manager it shows internet explorer and system idle are using all the cpu. I read that its a glith with flash player 10 and installing flash player 9 fixes the problem, but i have tried this and it doesnt. any suggestions? my operating system is windows xp.

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Having trouble with Flash Player in regards to youtube

Hello,
Recently I started having trouble with Flash Player in regards to using it with youtube. Sometimes all I see is a blank white screen and sometimes I do see the video with no surrounding youtube webpage or suggested videos etc. Nothing has changed on my computer as far as I know except the usual updates etc. I have tried uninstalling Flash Player and reinstalling with no luck. I even tried an older version. I am running windows XP and IE and have McAfee for my anti-virus. I am not the most computer savy person in the world and could sure use some help.
Thanks,
Ron

Hitomi,
Thanks for the links. I am pretty sure it is not a problem with Flash Player itself but something else that is causing this. I don't know how to do a "screen shot", but even if I did I don't know that it would do anygood to show that because the youtube video screen and surrounding webpage only show for a second and then it goes totally white.
Pat,
Here is what I found:
Intel(R) 82915G/GV/910GL Express Chipset Family
Driver Provider          Intel corporation
Driver Date               6/8/2005
Driver Version          6.14.10.4332
Digital Signer               Microsoft Windows Hardware Compatability Publis
Update:
This morning after doing some further reading and research on the Internet I tried running youtube in the "InPrivate Browsing" window and youtube worked fine. So thinking I should delete my Internet Browing History, Cache, and Cookies, based on what I read I went ahead and did that but it still doesn't want to work. I think I did the deletions correctly? As I mentioned above I am not very computer savvy but can get by on the basics. Where should I go from here based on this info?
Thanks,
Ron

Problems with flash Player

So I'm having a problem with flash player, and was wondering if anyone has experienced the same thing, or might be able to help.
- Upgraded 2 computers to snow leopard, macbook pro laptop, and mac Pro tower (intel proc).
- Laptop has no problems, everything renders fine, and without any difficulty.
- Mac Pro doesn't display any dynamic data, text fields show up blank, some flash player controls don't work, brightcove player won't load completely... things are just not working right.
- Main browser is Safari, but same problem exists in Camino, Firefox, etc...
- I've had Safari Stand installed, but have since removed it.
- I've removed GROWL notifications completely
- I've got debug and developer menus turned on (but have that with the laptop also.)
Please see the screenshot attached. This graph should have text data on it showing the x/y axis, the key, as well as data when you mouse over each block, but doesn't show anything.
The second screen shot shows a brightcove player from our website... There should have full controls at the bottom, and nothing shows up. If I right-click, and go to 'view full screen', I can't then get out of full screen by clicking escape key on the keyboard, I have to use any player controls, or right-click again, and hit 'exit full screen'.
Anyone have any suggestions? It's something to do with my computer, rather than snow leopard, because flash works fine on my laptop, but not on the desktop. Any help is really appreciated !

Hi!
I reached your post because I was having the exact same issues as you and I found a fix that worked for me! The problem is a font issue: I logged in with the guest account that had no users font installed and flash was working fine, so I logged back into my account and moved all the fonts in my 'User>Library>Fonts' folder in a folder in the desktop. Then I closed and reopened Safari and Flash was working!
In the end the problem was with a version of Arial that I had in my users' font folder: I deleted just that, put my users' font back in the folder and the problem disappeared.
I hope it hepls!
best
nicola

Unable to use my webcam with Flash Player

Similar Messages

Maybe you are looking for