Unable to use network home directories on a 2nd volume

Hi,
I am having a problem hosting network home directories on 10.4.4 server. Through the help of AFP 548's instructions I have had them working fine when the users folder is at /users however I would like the data stored on another hard drive for easy backups, etc. But when I set this up I just get the unable to connect due to an error message on the client machines.
I have tried setting up another folder on the boot volume and that works fine so I think the settings I am inputting are correct but as soon as I select a folder off the boot drive I run into problems again.
Any ideas?

Any ideas?
Yes, but it might also be helpful to know specifically what error message your users are getting when they try to log in.
If you've correctly set up your share point and network mount record as criss describes but you're still having problems, it may be due to the length of the path to the user's home folder. For more information on that point, see KnowledgeBase article number 107695.
One question: can your users find their home directories when they log in to the server using Go > Connect to Server in the Finder?
David Walton

Similar Messages

  • 10.5.6 Login Items Error with Network Home Directories

    I'm splitting this post off from a previous discussion which can be found here:
    http://discussions.apple.com/thread.jspa?threadID=1835976&tstart=0
    With 10.5.6 our Login Items are not working on client machines that use Network Home Directories. Everything works fine under 10.5.5.
    When the 10.5.6 client logs in, login items with a path directed to the Home/Documents folder cannot be found, and the following error appears in Console:
    "Unable to resolve startup item: status = -35, theURL == NULL = 1"
    I have no problem manually navigating to the Home/Documents folder and opening the login items. Removing and re-adding the login items does not fix the problem. Revert to 10.5.5 and the login items are fine.
    Below is a suspicious error that I see repeated multiple times in Console (viewing "All Messages") on the 10.5.6 clients but not on the 10.5.5 clients:
    Sender:
    loginwindow 34
    Message:
    FolderManager: Failed looking up user domain root; url='file://localhost/Network/Servers/myserver_name.com/Users/my_username/' path =/Network/Servers/myserver_name.com/Users/my_username/ err=-35 uid=0 euid=10790
    I'm sure I could find a work-around by moving the location of my login items or maybe even changing to launchd. However, this error seems to indicate something going on with the 10.5.6 install that might be more serious. I've done some typical troubleshooting: DFA, Repairing Permissions, Clearing Caches, trashing loginwindow and MCX preferences, deleting the /Library/Managed Preferences folder, rechecking DNS on the server (forward and reverse lookup OK).
    Any help is appreciated!
    Thanks!

    just to tell you, same thing here - it's nothing special about your setup. it's not a big issue for us as the kernel panic at logout on 10.5.6 is the real killer (no it's NOT JUST FONTS) so our workround is that we're not rolling it out! (staying 10.5.5).
    but on my own test 10.5.6 mac i get exactly the same issue with login items that are in the network home. local apps (font management app, ichat etc in /Applications) OK, but stuff on the mounted home server - nope and a line in the syslog for each item:
    Jan 28 09:25:54 hc04800-bssaht loginwindow[32028]: Unable to resolve startup item: status = -36, theURL == NULL = 1

  • You are unable to log in...; Network Home directories; 10.4 & 10.5 Servers

    I have a solution!
    Note: this is a new post because all previous posts dealing with this topic have been archived, MANY without an answer.
    Problem:
    Users with Network Home directories can't log in. After entering their correct username and password, the following error message appears:
    "You are unable to login to the user account 'username' at this time. Logging in to the account failed because an error occurred."
    Problem occurs with v10.5 Leopard client attempting to login to a Network Home directory hosted on a v10.4 Tiger server.
    _Significant Troubleshooting Symptom:_
    Client mac Console log (all Messages) contains the following entry at the time the user attempted to login to their Network Home directory:
    authorizationhost[509] ERROR | -[HomeDirMounter
    mountNetworkHomeWithURL:attributes:dir:Path:username:] |
    PremountHomeDirectoryWith Authentication( url=afp://server.example.com/Homes, homedir=
    /Network/Servers/server.example.com/Volumes/ServerHardDisk/Homes/username,
    name=username )
    returned 2
    _Computing/Network Environment:_
    v10.5 Leopard server doing: DNS; Open Directory with Kerberos for Single Sign-On; AFP for half of all users' Network Home directories.
    v10.4 Tiger server doing: AFP for the other half of the Network Home directories. Also, note that Open Directory is not running on this server, BUT IT IS CONFIGURED (using Server Admin) as "Connected to a Directory System" and has joined the Kerberos realm on the v10.5 Leopard server.
    v10.5 Leopard clients.
    Solution:
    v10.5 User Management manual
    http://manuals.info.apple.com/enUS/User_Managementv10.5.pdf
    says share points for Network Home directories have to have Guest Access ENABLED. See step 5 on page 117 and step 12 on page 118. Note that these are two different settings, but seem consistent with each other.
    I had followed/complied/set Guest Access according to steps 5 (page 117) and 12 (page 118) on BOTH the v10.5 Leopard AND the v10.4 Tiger servers. The solution that allows users to log on normally is:
    Uncheck/disable Guest Access (as set in step 12 page 118) for the v10.4 Leopard server only. Leave "Share this item using AFP" checked. Uncheck "Allow AFP guest access."
    The above worked for me. Your milage may vary. If anyone knows how to report this to Apple for fixing in the server software and/or clarification in User Management manual, please do. If anyone knows that this solution "breaks" other stuff, please post back.

    Other posts that dealt with this same issue and other potential solutions:
    http://discussions.apple.com/thread.jspa?messageID=5700241&#5700241
    http://discussions.apple.com/thread.jspa?messageID=5784186&#5784186
    http://discussions.apple.com/thread.jspa?threadID=1215039&start=0&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=9204496&#9204496
    http://discussions.apple.com/thread.jspa?threadID=1522353&start=0&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=10226660&#10226660

  • Folder Redirection not working on SMB Network Home Directories

    I've setup network home directories on a 10.7.3 server. NHDs are available via SMB currently. I'm trying to setup folder redirection via MCXRedirector for both the ~/Library/Cache folder and ~/Downloads and redirect them to the local client. Client is 10.7.3 joined to OD. I'm using Login Redirection and the option to delete the existing folder and create a symlink. I used these instructions to create the redirectors: http://www.afp548.com/article.php?story=MCXRedirector
    When NHDs are available via SMB, the folders are created on the local client, but the symlinks aren't created in the NHD. I can switch the NHDs to be available via AFP, and then it works fine. I can switch back to SMB and the symlink stays in place and appears to work with no issue.
    Am I missing something here? I can't find any documentation that says I can't use MCXRedirector with SMB shares, and I see a number of posts where it appears that people are using it successfully... so I'm not sure what is wrong? Any help or suggestions is appreciated.

    Hi James,
    For folder redirection issues, we can go to Windows Logs\Application in Event Viewer to check if some related error events were logged.  Besides, we can also run cmd command
    gpresult/v or gpresult/z to collect group policy result to check if something goes wrong.
    Regarding how to configure folder redirection, in my opinion, the following article provides a good guide.
    Configuring Folder Redirection
    http://technet.microsoft.com/library/cc786749.aspx
    Best regards,
    Frank Shen

  • Final Cut Pro with Network Home Directories

    Hi,
    I have been tasked with setting up a Mac network primarily for use with FCP. The main requirement is that the user profiles are roaming as users will move from desk to desk, it is a college.
    I have an Xserve with OS X server and Open Directory configured. I have configured the network home directories and have successfully logged in with different users.
    My questions is regarding Final Cut. What is the best way to configure Final Cut to reduce the amount of network traffic?
    I have redirected the users cache folder to the local Mac and configured the scratch disc to a local hard drive. Are there any of tips that someone with a similar setup can recommend?
    Thanks

    Most schools end up using ext HDs. Each student has their own firewire HD with All the fcp capture, scratch etc docs on it.
    Thats the only way to meet the demands of video production and retain portability

  • Users on network home directories hang after sleep

    Hi,
    I have the following problem: I have a 10.5 server with network home directories. I can login from Snow Leopard (10.6.1) however whenever the machine goes to sleep and comes back from sleep, the user hangs then if you wait a bit then it will come with the message that the share has been disconnected and it asks you to manually unmount. It will stay there forever. When you click disconnect, the system will unmount and remount the home directory but in the mean time, Mail will have reported disk i/o errors in the logs and throw errors (ranging from type in your password to 'rebuild index').
    Going through the log files (and verbosity high) it seems that when going to sleep, the system doesn't unmount the network home directory. After it wakes up from sleep it attempts to unmount the home directory share which off course fails because it's in use and then it locks up, after you click disconnect, it says "spins reported" in the logs and goes on with remounting the shares.
    The issue doesn't happen if the user is local. If anybody has an idea as to how this works or if they have it working, please let me know. I have tried just about anything. AFP shares, NFS shares, I have tried with or without the intr, nolocks, locallocks mount options - they all have the same issue. I have even tried another Mac Mini with a fresh install of Snow Leopard.

    I found a possible cause and solution.
    This has been on 10.6.1 with Mac Mini's. Then we got a new Mac Pro with 10.6 out of the (Apple) factory which I updated to 10.6.1, same issue. What I didn't think about is that by default I install a heap of software (including XCode, Adobe CS4 and Office 2008) with customized packages and workgroup manager preferences.
    So I was mucking around with Cocktail (the tool to clean up caches etc.) and I noticed Snow Leopard hung every time after cleaning & recreating some caches. Now that I had a reliable way to hang Snow Leopard I investigated what could cause it.
    I noticed during a PackageMaker session that Adobe CS4 installs a Version Cue startup script in /etc/machinit_peruser.d. I deleted it, rebooted, used Cocktail again and it went all the way through without hanging. Rebooted again, according to the logs it pre-linked & cached the kernel and several kernel extensions and that was it, no more hangs, no more issues logging in after sleep or screensaver.
    So possible causes:
    - VersionCue installs itself as a kernel module or something (the location says "mach" which is the kernel after all) which is not compatible with Snow Leopard.
    - The caches and kernel extensions were 'dirty' out of the box but VersionCue (or something else that interacts with it) blocked my or Snow Leopard's automated attempts to clean them.
    - VersionCue reinitializes (it sits on the network after all) after a sleep or screen saver timeout in a way that gives issues with Snow Leopard

  • Stumped on AFP network home directories.

    Heyo,
    Been RTFMs on File Services, User Management and Open Directory. Also looked in www.AFP548.com but didn't find anything helpful.
    We have a mixed environment and windows users aren't having any problem with network domain logins or using smb shares. Mac clients can mount the network shares with afp but network homes are a no go.
    Made the changes needed for the firewall and tried it with the firewall off just to be sure.
    The /Home share is automounted (not using the default /Users).
    Guest access is on in Sharing and AFP.
    Network Mount for /Home is set to Enable network mounting, AFP and User Home Directories.
    SMB Windows Homes are in the same directory and run without problems.
    Directory Access on the Client saw the server and looks ok.
    Only ref. I can find for the login attempt is under Open Directory Password Service Server Log:
    Apr 23 2006 16:42:31 RSAVALIDATE: success.
    Apr 23 2006 16:42:31 USER: {0x00000000000000000000000000000001, netadmin} is the current user.
    Apr 23 2006 16:42:31 AUTH2: {0x00000000000000000000000000000001, netadmin} CRAM-MD5 authentication succeeded.
    Apr 23 2006 16:42:31 QUIT: {0x00000000000000000000000000000001, netadmin} disconnected.
    and OD LDAP log:
    Apr 23 16:42:31 ci slapd[81]: bind: invalid dn (netadmin)\n
    Nothing in the AFP log.
    Any thoughts on what I should try or something obscure I may have missed when setting up MacOS client network home directories with AFP?
    Thanks
    Mitch
    Server: 10.4.6
    Workstations: 10.4.6

    Getting closer.
    Kerberos wasn't running and the ODM wouldn't Kerberize.
    This thread sorted out the issue:
    http://discussions.apple.com/thread.jspa?messageID=2186542&#2186542
    Kerberos is running now but still canna login for mac clients.
    hostname and sso_util info -g both resolve properly.
    but when i run:" slapconfig -kerberize diradmin REALM_NAME "
    all looks good until the command (with the proper substituions)
    "sso_util configure -r REALM_NAME -f /LDAPv3/127.0.0.1 -a diradmin -p diradmin_password -v 1 all"
    automatically runs and I get a list of:
    SendInteractiveCommand: failed to get pattern.
    SendInteractiveCommand: failed to get pattern.
    SendInteractiveCommand: failed to get pattern.
    and "sso_util command fialed with status 2"
    the sso_util command by itself spits out
    Contacting the directory server
    Creating the service list
    Creating the service principals
    kadmin: Incorrect password while initalizing kadmin interface
    SendInteractiveCommand: failed to get pattern.
    kadmin: Incorrect password while initalizing kadmin interface
    SendInteractiveCommand: failed to get pattern.
    kadmin: Incorrect password while initalizing kadmin interface
    SendInteractiveCommand: failed to get pattern.
    etc...
    even though the login/pass are good
    any thoughts on what i should check or where i should go next?
    Thanks
    Mitch
    iMac G5   Mac OS X (10.4.6)  
    iMac G5   Mac OS X (10.4.6)  

  • Need Help setting up "Network Home Directories" or Something Similar

    Alright so, I am sure the answer to my question exists but I have no idea what i am looking for as far as syntax is concerned. I have taken over as tech at a full mac School and have not touched a mac before in my life. I will try my best to give a detailed description without an entire life story.
    My school has 10.4 on laptops which we run a script on to bind to a directory allowing them to access accounts created on our server. That part works fine. The problem we are having is syncing or saving any files/changes to these networked accounts. The accounts seem to have home directories created, i went through workgroup manager and set up login/out and background syncs, and nothing seems to work(Copy/save). This year it would have been nice to have the syncing feature since all student/teacher laptops would go back and forth from home and work. However next year will change a bit since we will keep all student laptops here and the teachers will still take them home. We also have desktops of course which do not move and will be accessed by the students.
    I need to find a way for students to log into the server to access their account and have it automatically pop up displaying their own files/folder on any machine they access since they wont always be at the same machine. considering there will be upwards of 100 students accessing each machine, local syncing for this would not be a good idea. My best guess would be setting up network home directories so they can log into and work directly from the server and have nothing but the original OS installed on their local machine.
    As far as the teachers go, Since they have one laptop the entire year and take them home the syncing method would be the best. That way they can come here, turn on their laptop, automatically sync as they log in, and save everything when they log out (or every so many minutes since some of them close it and just run home). I tried doing this with a student account but could not get it to work. My other problem with this is that the teacher laptops are 10.5 and I have no clue how to bind them to the directory since I was not the one who created the original script which is something i would like to reverse engineer to my standards since it has some nice little things in it I just wish to tweak.
    A short recap of what i need:
    1) Network based accounts with network home directories, nothing locally saved
    2) Network Based accounts with Portable Home Directories, Syncing between local and server files
    3) Bind 10.5 machines to server
    4) Program to read and edit a script.
    I somewhat know the terminology for PHDs and MHDs and have read a bit about those but still cannot get them to work, but I am extremely frustrated with my lack of terminology for NHDs (If that is what they would even be called) and have had a hard time finding any information on how to set them up. The only thing i found was stating that if the server goes down, so do the accounts. Which isnt a problem since we have multiple servers as well as last ditch local accounts for students to just access the computers.
    As far as i know, our servers are running LDAPv3 w/ OD, maybe even not with OD, I really don't know. If anyone can give me any help with this it would be much appreciated. If you need any additional information let me know and I will try my best to get it to you. I may even be willing to wipe everything and start fresh if it is required since these havent been used much in over 2 years, only for drive mounting storage.

    I received some information on another forum, however I am still stuck.
    So i rebound a laptop to the server via Directory Access, created a new account using Workgroup Manager, set the Home Point in WGM for the Account to a specified folder on the server's raid and no luck.
    The account authenticates with the server, but it saves everything locally and ignores the NHD. Anyone with any ideas?

  • Mac OS X Server, Network Home Directories & Time Machine

    hi,
    I am using mac os x server to manage a small workgroup using open directory and network home directories, the server is backed up using time machine. From what I understand, time machine does work on network home directories.
    However, as I am backing up my server using Time Machine, it is already backing up the user directories. Is there any way of getting a client to access the server time machine backup to access the backups of the user directories?
    Of course, it would be easy to restore files by logging onto the server as the user and restoring from there. I am just wondering if there is a more elegant solution available to do this from a client machine.
    any thoughts?
    thx!

    Hi,
    I am trying to do the same exact thing and find that it is best to do this locally (for now). Not only is the network way slower, but it seems to make things worse. For example, things backed up via the client machine are routed from the FTP server/volume mount and different permission wise. When you try to restore them locally, it should work, but the folder had different permissions because they were initially created in root (for me). So, I hope they would come out with something better than what is available now. Thanks!

  • ITunes library keeps disappearing with network home directories&MacBookPro

    I've been using iTunes with network home directories for years. My wife & I have network home directories on our Macs and we can log into any of our Macs with our network home directories. The actual iTunes Music folder is also on the network server and shared between our user accounts.
    This has always worked fine with my G4 cube, my PowerMac G5 and my PowerBook. As long as I only open iTunes on one machine at a time, I can open it on any of my machines and everything works great.
    However, with my new MacBook Pro, my library keeps disappearing and I have to reimport it from the XML file every couple of days. Seems to erase my iPod Shuffle too at the same time (maybe it's triggered by plugging in my iPod).
    Any ideas? Is there an endian issue with the library?
    I can't figure out how to get any feedback on what's happening. Is there a debug log file I can enable?
    PowerMac G5, PowerBook, MacBook Pro   Mac OS X (10.4.7)  

    I've got one better...I imported all my CDs onto iTunes. Then I upgraded. Here is what happened...All songs remained listed, however when I would click onto a song, a ! mark appears in front of the check mark and a window pops up saying "song could not be used because the original file could not be found. Would you like to locate it?" Well this occurred on 75% of my songs. Apple info led me to believe I could use my iPod as a hard drive. So I tried hooking up the pod to my computer. Well, from 3688 songs, I was down to just over 200, so I guess that is an even higher percentage.
    What iTunes did was made a folder in "my music" with years 1955 to 2007. In those different years folders are the CDs that were released in that year. They have to be opened, each individual song, and re entered to itunes. All this I discovered on my own. No help from Apple. Not to mention what a royal pain in the *** process, which I am still in the process of doing. And don't even get me started with Artwork

  • What is DirectoryTools?  Why is it touching network home directories?

    Our normally pacific OD/AFP home directory setup has occasional hiccups. A quick summary of the setup:
    1) 10.4.11 XServe running OD master (and another machine as slave)
    2) 10.4.11 XServe/XServe RAID serving home directories via AFP
    3) 10.4.11/10.5.7 desktops as clients with all users (~50) having network home directories
    The hiccups are very occasional, but annoying as rebooting or restarting AFP on the home directory server is the only way of fixing things. The symptoms are:
    1) Users get the dreaded "You are unable to log in to the user account 'my user' at this time. Logging in to the account failed because an error occurred. The home folder for the user account is located on an AFP or SMB server." message.
    2) On the server, DirectoryTools is running for each home directory in turn. For example:
    /System/Library/PrivateFrameworks/Admin.framework/Resources/DirectoryTools 30081564 /Volumes/home/a_username 5111 1001 1 user English a_username
    The 5111 and 1001 are the user's UID and GID. This in turn runs find, which does
    /usr/bin/find /Volumes/home/a_username -exec touch {} ;
    The touch plays merry **** with incremental backups, because suddenly everything was altered this morning.
    Google has failed me, and I'm pretty much resigned to not finding a solution to this problem unless someone here has come across it in the past.

    http://discussions.apple.com/thread.jspa?messageID=6739752

  • ARD 3.2, network home directories and two admin workstations = problems

    Hello:
    I've got a situation where I've got two ARD admin workstations in two separate classrooms where the instructors have network home directories. If an instructor switches from one machine to another after setting up ARD on the first (i.e. entering a password, making computer lists, etc.), they are asked to enter their ARD password and they are not allowed in no matter what password they enter. It seems that there is some machine specific information in the ~/Library/Preferences/com.apple.RemoteDesktop.plist file because the only way around the problem that I've found is to delete this file and re-enter a password. This creates a new plist file, but the problem comes back as soon as the user uses ARD on the other admin workstation. Each machine has a separate (licensed) copy of ARD on it.
    What's the right way to use ARD with admins that have network home directories?

    Hi,
    You mentioned the machines are all from a single image. I realize you are an experienced ARD user. However, there are quirks in this app at any stage of development. I'm sure you already applied a unique name to the shared network name and have no DHCP conflicts as well as checked that all the accounts, not just the admin account that permissions are checked. Although you may have all the correct ports addressed and configured, there is no accurate accounting for the gremlins. These play havoc across the network. Sometimes the only thing you can do is go to the machine and walk through the settings as if it was the first time. I can't tell you how many times a problem has resolved itself after just logging into the admin and redoing the settings. I mean the exact settings that are already selected. Sometimes the settings were actually wrong, even ones that came from an identical image. Like forgetting to select the observe and control selections in the sharing options for all the users. Other times it was simply deselecting and reselecting the options and restarting that snapped the machine out of the funk.
    Aside from the occasional discovery of admin setup issues, I live by the motto "the simplest solutions are usually the best, and should be tried first". Glitches do happen though. Sometimes running the scanner and reselecting and dragging the same machine into your user lists can refresh a connection that is not acting properly. I have detected countless quirks that cause strange side effects. Do a get info on the specific machine and delete the IP, then make sure you have the "name".local in the DNS name field. Re-enter the admin or try a user account name in this experiment and test this. This has given me clues to setup issues before having to go to the machine. I know this stuff sounds simplistic but it has solved most of my issues.
    Good Luck

  • IPhoto '11 and network home directories

    Hi,
    We are using iPhoto '11 and network home directories which live on a SMB file server. When a user attempts to run iPhoto they get the following error: "Warning. The library could not be opened because the file system of the library's volume is unsupported."
    iPhoto '09 works fine in our environment, and if the library is relocated to the Macintosh HD > Users > Shared directory it can be loaded. This appears to be a new bug in iPhoto '11. Am i correct?

    iPhoto was never designed for a network environment. It's low end user application. If you want an image management application this is designed from networks and multi users you'll need a DAM (digital asset management) application like Media Expression.
    You can learn about EM and other DAM apps at The DAM Forum where those applications are discussed and evaluated by professional photographers.
    You can request adding a new feature to iPhoto via http://www.apple.com/feedback/iphoto.html.
    OT

  • FontExplorer + Network Home Directories = font amnesia

    I'm a humble (tho ambitious) graphic design instructor trying to get network home directories working in my 30-seat design lab. At the beginning of January I migrated all workstations to a freshly built 10.4.4 universal image and updated (actually re-installed) my server and took it to 10.4.4.
    In my testing of network home directories everything is working perfectly accept our font manager. (Even Word is playing nice thanks to a tip I found here!)
    We started with FontAgent (cause we own 30 licenses), but quickly found that to be not very well adapted to a network home environment. (I did get the official work-around shell scripts from Insider Software, and those looked to be an easily broken kluge that only solve half the problem.)
    So again following Gerrit's tips from here, I tried the latest version of FontExplorer which is supposed to support network home directories-- and it runs! (Unlike FontAgent.)
    ...but it has an incurable case of amnesia. In other words, as users move around from machine to machine, session to session, and day to day it always forgets all their fonts-- even though the actual font files always remain accessible in the same place.
    Upon investigation, I can see that FontExplorer is actually doing something very similar to the FontAgent shell scripts. That is, whenever FontExplorer is launched in a NHD environment it creates a new "FontDatabase.db" file in a directory on the local drive:
    Users/Shared/Linotype/FontExplorer X/{UserShortName}_{UserNumericID}/
    and creates a symbolic back to the file's customary location in the user's networked Library:
    /Application Support/Linotype/FontExplorer X/
    The amnesia part comes in because I haven't found a way to get FontExplorer to start with-- or keep-- an already configured "FontDatabase.db" file. It constantly seems to be resetting itself with each login.
    Does anyone have wisodm or suggestions on how to make FontExplorer remember its fonts?
    Does anyone have any tips for getting any font manger to be totally functional in a network home environment?
    PowerBook G4   Mac OS X (10.4.4)  

    Excellent tips, and thank you - they're very helpful for all involved!
    I see that you're using NFS (and its behavior makes sense), but this might make your life a little easier if you were to use AFP for home directories again:
    1. If you have an automounted network Library (/Network/Library), that would be perfect for housing a "starter set" of Font Explorer preferences and your initial, preconfigured database file, in this way.
    Create a folder in your automounted network Library and name it something like FEInitialData. Set the permissions such that your users can only read (root:admin 775 would be good). Now your clients all see the FEInitialData folder in /Network/Library/FEInitialData.
    Locate these files from an appropriately configured local user account: com.linotype.FontExplorer.plist and the ~/Library/Application Support/Linotype/FontExplorer X folder (that contains the FontDatabase.db file).
    Place a copy of the com.linotype.FontExplorer.plist file in the FEInitialData folder in your network Library. (To clients, this appears as /Network/Library/FEInitialData/com.linotype.FontExplorer.plist.)
    Use Disk Utility to create a new disk image from the local ~/Library/Application Support/Linotype folder. Make sure that the image is a read/write image, and name it something like FESupport.dmg. Then place that resulting disk image in the network Library, so that to clients, this appears as /Network/Library/FEInitialData/FESupport.dmg.
    2. Utilize an AppleScript app as a login item to perform the following listed actions at login time. You'll have to either distribute the login app to each computer (e.g. in their respective Applications folders), or place it in the automounted Library (or automounted Applications, etc.) like /Network/Library/LoginScript.app. You'll also have to define the script as a login item for your users. You can do that at the group level in Workgroup Manager once you have the LoginScript.app in the same relative place on each client.
    Be sure also to remove FontExplorer X itself as a login item, since it needs to be quit while we're preparing files for it!
    Listed Actions to be done by LoginScript.app:
    1. If no ~/Library/Preferences/com.linotype.FontExplorer.plist file exists, copy it from /Network/Library/FEInitialData.
    2. If no ~/FESupport.dmg file exists, copy it from /Network/Library/FEInitialData.
    3. Mount the FESupport.dmg file to a local filesystem path, so that its contents appear to reside in a local folder. (For this script, I'll use /tmp.)
    4. Ensure that a ~/Library/Application Support/Linotype folder exists and contains a symbolic link named "Font Explorer X" which points to the mounted disk image's contents.
    5. Launch Font Explorer. (Upon initial launch, the metadata caches should be recreated.)
    -----LoginScript.app---
    (*See if the preference file and FESupport disk image are in the right places. If not, copy them there.*)
    try
    do shell script "ls ~/Library/Preferences | grep 'com.linotype'"
    on error
    --The com.linotype.FontExplorer.plist file is missing.
    do shell script "cp /Network/Library/FEInitialData/com.linotype.FontExplorer.plist ~/Library/Preferences/com.linotype.FontExplorer.plist"
    end try
    try
    do shell script "ls ~ | grep 'FESupport.dmg'"
    on error
    --The disk image is missing.
    do shell script "cp /Network/Library/FEInitialData/FESupport.dmg ~/FESupport.dmg"
    end try
    (*Create the mount point for the FESupport.dmg file*)
    try
    --Delete the mount point in case we're not the first login and to ensure that we have an empty folder owned by this user.
    do shell script "rm -rf /tmp/FEMountPoint"
    end try
    try
    --Create the mount point
    try
    do shell script "mkdir /tmp/FEMountPoint"
    end try
    (*Ensure that we have a symbolic link to the mount point*)
    try
    --Remove any existing links just to be safe.
    do shell script "rm -rf \"~/Library/Application Support/Linotype\""
    end try
    try
    --Create new symbolic links.
    do shell script "mkdir \"~/Library/Application Support/Linotype\""
    do shell script "ln -s \"/tmp/FEMountPoint/FontExplorer X\" \"~/Library/Application Support/Linotype/FontExplorer X\""
    (*Mount the ~/FESupport.dmg file to /tmp/FEMountPoint*)
    do shell script "hdiutil attach ~/FESupport.dmg -mountpoint /tmp/FEMountPoint"
    (*Open FontExplorer*)
    do shell script "open \"/Applications/Linotype FontExplorer X.app\""
    ---End Script---
    I might have messed up some of the syntax, so consider this a working example. Hope it helps!
    And, yes, if you need consulting, you can find my contact info at consultants.apple.com/consultant by searching for AuburnMac.
    --Gerrit

  • Drobo Elite & Network Home Directories

    I purchased a Drobo Elite to host my network home directories after being sold on the awesomeness of their "Beyond RAID" technology and assured that it is an ideal device to host user profiles. Unfortunately, once I have more than 20 users connected at a time, the network comes to a crawl. The maximum number of users I support is the same as the Open Directory Master supported before the Drobo was installed, however the login times and functionality preformed substantially better when the Users folder was hosted on a single local drive on the Xserve.
    After enabling jumbo frames on the iSCSI NIC between the Xserve and the Drobo Elite, DataRobotics tech support informed that no Drobo unit is designed to host profiles directly so I'm at a loss as to what I should use it for.
    Considering the situation is it better to just ditto copy the Drobo directory to the /Users on the Xserve, enable PHDs on the frequently logged in users, or shop for a sub $2000 solution?

    This would likely increase your network bandwidth, not decrease it.
    Since /tmp will be periodically deleted, any data cached by an application is going to get deleted, forcing it to go back out to the network to reload the content, an degrading performance for everyone.
    I would look elsewhere for data that's free to remove, as well as engage the users for help ("Please throw away anything you no longer need", or maybe "please move data you no longer need to this other archive volume").
    Also check who's using what. Very often you'll find a small percentage of users are using a disproportionately large amount of space. Focussing on those users will get you your best result in the shortest time.
    At the end of the day, though, it may just be that you need more space.

Maybe you are looking for