Unable to use PIC01 transaction for Supersession chain creation

Dear All,
I am trying to create a supersession chain using PIC01 transaction. While entering the transaction, i am getting error as "Transaction Code PIC01 cannot be executed. You are trying to execute the transaction code &1, but it is in a deactivated package.
System Response
Execution is cancelled.
Procedure
Use transaction SFW5 to check whether all components required for the operation of your system are activated (switched on).
How should i resolve this. I checked in SFW5, but couldnt really know which package i should activate etc.
thanks in advance for your help.

Hello shyamsundarl
If you are using the DIMP solution only for the Supersession
functionality and not for the MPN, you would only have to activate
DIMP_SDUD Business Functions.
Please read note 849981 and discuss the issue with your SAP consultant.
Consider that settings of buisiness function sets (TA SFW5) are
irreversible... so please do the switch first on a dev system only,
and test carefully!
Enda.

Similar Messages

  • I am unable to use iTunes credits for game credits When I try to purchase a box comes up with an error has occurred please try later"

    I am unable to use iTunes credit for game credit purchase. A box comes up with " an error has occurred Please try later" any advice greatly appreciate. Thanks

    mgpainter wrote :
    prince2012 wrote:
    Hi mgpainter
    Welcome to the Community
    Sorry I am not a RIM employee, But still regarding your problem have a look at this RIM Knowledge Base to resolve the error .Try it and see if it resolves your problem : KB25882 .
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Thanks for the welcome and the reply!
    I looked at KB25882 and my settings are good, so that didn't help.
    I had this problem over a year ago, and someone at RIM found a bit set that shouldn't have been set and fixed it (that is my terminology for what happened).
    I am really looking for a way to contact RIM directly.  I hate going through the mill with my carrier to get it escalated to RIM for resolution......  <sigh>
    Hi mgpainter 
                                Most easiest way to Contact RIM is through your Carrier but as you don't prefer that than there is another way of support called Incident Based Support but just want to inform you that its not free.If you want have a try  BlackBerry Incident Based Support .
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

    after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Delete the transferred values using the transaction for changing old assets

    how to Delete the transferred values using the transaction for changing old assets.
    i want delete the my asset.
    Thank you
    Anil

    Dear Anil,
    AS06                 Delete Asset Record/Mark for Delet.
    AS26                 Mark group asset for deletion     
    Hope this will help.
    Regards,
    Naveen.

  • Unable to use MSN Premium for the Share function within Elements 10

    I'm unable to use MSN Premium for the Share function within Elements 10 (it seems the program does not recognize MSN Premium for a valid email program for use within the Share function of Elements 10).  Is this something than can be resolved?

    No, unfortunately. You will have to either set up the adobe email or else just use the attachments button in the MSN premium instead of sending directly from PSE.

  • Forecasting for supersession chain

    We are using the automatic reorder point MRP type
    when forecasting is run the system system takes individual material for determing the forecast and not the the material as a part of supersession chain.
    Let me give u a example.
    material "A" has a consumption in the past
    material "B" is a new material (has no consumption at all) and
    material "B" is superseeding material "A"
    when the forecast program runs, it will calculate a reorder point for
    material "A" because it has a consumption history, but the reorder
    point of "B" is zero because material "B" has no consumption history
    Suppose no stock,PO, or PRs for material "A" & "B".
    When the MRP runs, it considers only the last supersession which
    is "B". of course "B" has a zero reorder point and so no PRs are
    generated.
    Is there is a way to consider the summation of the reoder points of all the supersession chain materials in the MRP or to make the forecast runs only on the last supersession taking into account the consumption of all supersesion chain materials.

    Hello shyamsundarl
    If you are using the DIMP solution only for the Supersession
    functionality and not for the MPN, you would only have to activate
    DIMP_SDUD Business Functions.
    Please read note 849981 and discuss the issue with your SAP consultant.
    Consider that settings of buisiness function sets (TA SFW5) are
    irreversible... so please do the switch first on a dev system only,
    and test carefully!
    Enda.

  • Tracing of message in Status Bar using Call Transaction for MRBR

    Hi
    As per the business requirement, I would like to automate the MRBR Transaction. I am achieving this by using Call Transaction. After aaplying certain company codes as an i/p; i receive the invoices as an o/p in a ALV Lay out. Say for example, 100 invoices are displayed in a AlV Lay-out after applying i/p. Now I select all these 100 invoices and release them.
    All these steps are recorded and supplied to Call Transaction via BDC table.
    Problem:
    The number of invoices released, appear in the status bar of that ALV Lay-out screen. This message appears on the ALV screen after I have released the invoices and clicked on "SAVE" button.I would like to use this information and display this number (No. of Invoices released) in my Job Log. But I do not know how to do it. Could any one help me out for this?
    Thanks in advance,
    Jigar Shah.

    Yes I have tried that option as well.
    But the thing is, the recording gets over as soon as I click on "SAVE" button.And that message apperas in status bar only after I click on "SAVE" button.So this way the message in the status bar never gets recorded.
    Thanks & Regards,
    Jigar Shah.

  • Unable to use mssqlserver4.Driver for v6.5 and SQL2000 together

    we are unable to use weblogic.jdbc.mssqlserver4.Driver for v6.5 and weblogic.jdbc.mssqlserver4.Driver
    for SQL2000 together. We have our DB set uo in MSSQL server v6.5 and are migrating
    to SQL2000. we need to support both the versions till the migration is complete.
    Looks like WL6.1 sp2 can have only either one of them. Anybody has any inputs
    on how to resolve this?
    -shiv

    i was unable to use mail due to the IMAP issue
    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution.

  • Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format

    I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
    Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
    I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
    I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
    In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
    Thanks in advance.
    Tom

    Am I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
    Tom

  • Error 00-341 RAISE_EXCEPTION when using Call Transaction for VA01 in backgr

    Hi,
    I am getting this message when I use call transaction to create a sales order using VA01. Following is the statement I have used.  Note that when i execute the program online, I am not getting any errors. I could create sales order without any problem. I am getting this exception only when I run in background.
          CALL TRANSACTION 'VA01'
                     USING BDC_TAB
                      MODE 'N'
                    UPDATE 'S'
             MESSAGES INTO W_MESS_TAB.
    When I captured message tab, I got following messages.
    DC006 - Control Framework: Fatal error - GUI cannot be reached
    00341 Runtime error RAISE_EXCEPTION has occurred.
    Please help me in this regard.
    Regards
    Kasi

    Some times execution of BDC program in back ground is different from the foreground. Some screens may appear in background and raise error while same will not when executed in foreground.
    Double click the message in Session log to know more details.
    One way is to suppress the screen while executing BDC.
    Alternatively I suggest to use BAPI instead.
    - Sanjay

  • Unable to use RAS SDK for server-side printing for XI 3.1

    Hi all,
    I am using RAS SDK for server-side printing.  Here are my codes:
    ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
    IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise");
    IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
    //out.println("Current User is = " + enterpriseSession.getUserInfo().getUserName());
    //out.println ("<br>");
    IInfoObjects infoObjects = iStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_Kind='CrystalReport' AND SI_NAME = 'Sales Print'");
    IInfoObject infoObject = (IInfoObject)infoObjects.get(0);    
    IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
    ReportClientDocument rcd = new ReportClientDocument();
    rcd = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
    //Create print options to use when printing.
    PrintReportOptions printOptions = new PrintReportOptions();
    printOptions.setPrinterName("
    cdi5boe
    HPLaserJ");
    printOptions.setJobTitle("Test Printer Job");
    printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
    printOptions.setPaperSource(PaperSource.auto);
    printOptions.setPaperSize(PaperSize.paperLetter);
    printOptions.setNumberOfCopies(1);
    printOptions.setCollated(false);
    PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
    printOptions.addPrinterPageRange(printPageRange);
    //Print report.
    rcd.getPrintOutputController().printReport(printOptions);
    When I run the report, I got the following errors:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: com.businessobjects.crystalreports.printer.bean.ReportPrinter---- Error code:-2147215357 Error code name:internal
    I consult the Diamond Technical Community and I found the issue related to printer name:
    https://boc.sdn.sap.com/node/498
    However, I did check the printer name, it is accessible via Windows Explorer.
    Anyone knows how to resolve this?
    Regards,
    Derek

    It doesn't appear to be listed as a dependency in the developer docs, but would you try putting the ReportPrinter.jar in your RAS app?
    Sincerely,
    Ted Ueda

  • Transaction for Masive Asset Creation

    Hi there !, Is there any way to create multiple assets at the same time from an excel file or a txt file ?  So no need to create asset by asset using AS01 ?
    thanks !

    Hi,
    SCAT is another tool where you can upload the master data. It uses the transaction recording procedure to upload data, somewhat similar to LSMW. But SCAT is even more simplified way.
    You can record a SCAT with "AS91 - Legacy Master Upload" with amounts or you can record with "AS01 - New Master Creation" depending on your requirement.
    Further for BDC you need the help of an ABAPer. But SCAT is meant for functional consultants only. You simply have to use te correct fields. Finding fields is also not difficult because SCAT provides them to you directly.
    Regards,
    Swapnil

  • Using Simpleviewer Pro for Web galleries creation

    For once, I don't have a problem, I just want to share a wonderful experience with Simpleviewer Pro. Simpleviewer (the free version) comes with LR and is pretty fast and easy to figure out. However, I went and bought the Pro version for $35 and found it much more powerful and faster. It does everything I wanted from a Gallery generation application. I installed it on my desktop but when I tried the same installation on the Laptop, it crashed and told me it cannot install. After emailing techsupport I got an answer virtually in hours. It gave me specific steps to try to resolve the problem and asked to be kept posted on developments. I tried a second time, unsuccessful again and emailed svBuilder-PRO with copies of the error messages I was getting. They got back to me right away : the problem was actually a WINDOWS problem, where an old version of Adobe AIR could not be unistalled to put the new one (Simpleviewer pro uses Adobe AIR). My email had a link to a Microsoft support site which had a Microsoft FIXIT executable. I downloaded and ran the FIXIT, it fixed the problem and svBuilder - Pro installed correctly.
    In two words, this software is fast, powerful and elegant, it gives me everything I need for WEB Galleries creation and I would highly recommend it to anybody trying to do (or help doing) a WEB site.

    Here's the appropriate language relating to this
    d) Soundtrack Pro. You may use the Apple and third party audio file content (including, but not limited to, the built-in sound files, samples and impulse responses) (collectively the “Audio Content”), contained in or otherwise included with the Apple Software, on a royalty-free basis, to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual audio files may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files or music beds.
    It mentions that you can distribute your audio projects, so that might seem to indicate that the answer is yes. The language is clearer in regard to synchronized music to picture, or audio for broadcast or other distribution.
    +Personally I see a gray (grey) area here . . . what about if I took a piece of stock music from the audio content and wrote lyrics to it and called it a song. Can I claim sole authorship of that . . . the agreement seems to indicate yes, but that doesn't scan to me.+
    Anyway, i think if you're talking about writing a song using loop content, I'm pretty sure the answer is yes you can sell the resulting creation. _But I'm no lawyer_. It's probably open to debate.

  • Unable to use ES Workplace  for HU6  PI 7.0

    Hi , I am able to login on HU6 PI 7.0  box but in the integration Builder, when I am trying to open INtegration Repository.  Then  It open a new java dialogue box, which shows  that it is downloading jar files ...But when I clicked it I got the error: 
    An error occurred while launching/running the application.
    In General tab it shows:
    Title: Integration Builder
    Vendor: SAP AG
    Category: Download Error
    Unable to load resource: http://pi.esworkplace.sap.com:80/rep/repository/aii_ibrep_client.jar
    Eception is : JNLPException[category: Download Error : Exception: java.io.IOException: Server returned HTTP response code: 403 for URL: http://pi.esworkplace.sap.com:80/rep/repository/aii_ibrep_client.jar : LaunchDesc: null ]
         at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
         at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Console tab it shows : Java Web Start 1.4.2_17 Console, started Mon Dec 01 13:41:32 IST 2008
    Java 2 Runtime Environment: Version 1.4.2_17 by Sun Microsystems Inc.
    Please help me . So that I can use the PI 7.0 . I tried a lot to open it but no success. Thanks 
    regards
    Ram

    Please put the domain name in  host file and then check .
    Mukund

  • Can I use NI 8451 for daisy chained SPI? How?

    Hi Experts,
    I am new to Labview and now I am trying to find a solution how I can read and write SPI commands on a daisy-chained configured master-slave. The system I am using has 2 slaves. Each slave would need 24 bits per command frame and SCLK is at 400 kHz. Is it possible to use NI8451 for this problem? I would like to know because we would like to purchase this module if it can do the job.
    I hope you can help me.
    Thanks.

    If you go to NI's website (ni.com) and search for USB-8451, you will find a lot of information about this device.  The user manual specifies that it has 8 chip select lines, so it can handle up to 8 slave devices.  The document shows how to hook it up and how to use it.  There is a Labview driver library for this device to make your programming easy.
    - tbob
    Inventor of the WORM Global

Maybe you are looking for