Unable to Use Proofing Tools in Portuguese after Installation
Good Afternoon!
I am wondering if someone might be able to point me in the right direction with this.
Our computers all run Windows 7 x64 Enterprise, with Office 2010 Professional Plus. I have one user, who has enabled her Portuguese keyboard and also needs to install the proofing tools in Portuguese. Following the link within Outlook (Not Installed
link) brings you to a "dead" page. I found the proofing tools online, in both x86 and x64 (we run 32bit Office) and tried installing them one at a time. The installation will complete successfully, but they tools still show as Not Installed.
I contacted AnswerDesk and they gave me a new file to try and the same thing happened. For troubleshooting's sake, I tried this on my own machine as well (same software, different hardware) and had the same result. Tomorrow I am going to uninstall
and reinstall Office and try again.
Would anybody have a suggestion on what else to try? I'm kind of at a loss, and I'm guessing it is some silly little thing that I am missing (like a random checkbox!)
Thanks in advance for any and all help and suggestions!
Good Afternoon!
I am wondering if someone might be able to point me in the right direction with this.
Our computers all run Windows 7 x64 Enterprise, with Office 2010 Professional Plus. I have one user, who has enabled her Portuguese keyboard and also needs to install the proofing tools in Portuguese. Following the link within Outlook (Not Installed
link) brings you to a "dead" page. I found the proofing tools online, in both x86 and x64 (we run 32bit Office) and tried installing them one at a time. The installation will complete successfully, but they tools still show as Not Installed.
I contacted AnswerDesk and they gave me a new file to try and the same thing happened. For troubleshooting's sake, I tried this on my own machine as well (same software, different hardware) and had the same result. Tomorrow I am going to uninstall
and reinstall Office and try again.
Would anybody have a suggestion on what else to try? I'm kind of at a loss, and I'm guessing it is some silly little thing that I am missing (like a random checkbox!)
Thanks in advance for any and all help and suggestions!
Installed the Proofing tool SP2 and doesn't work either
Nestor Portillo Microsoft Communities Director [@nportillo]
Similar Messages
-
I am unable to use Highlight Tool in Adobe Reader X. Please suggest me solutions.
I am unable to use Highlight Tool in Adobe Reader X. Please suggest me solutions.
Hi -graffiti
Thank you again for your 10.24 post. I tried your suggestions today. The university computer lab i use has Adobe Acrobat Pro 6. The OCR function is under the dropdown menu "Documents>>Paper Capture". This permits conversion a scanned page to searchable text. Before beginning it asks you to select 1 of 2 Settings defined as: "Primary OCR Language English", or "PDF Output Style: Searchable Image (Exact)". That is the only choice to be made before conversion begins. After the conversion you can review and correct suspect words on captured pages. I tried both choices and regardless of which ended up with a document that was searchable, but still would not permit highlighting (I selected text with the highlight tool, clicked and dragged over a captured page, and nothing happened, same result as my earlier post). If I search for a particular word, all occurrences become shade-highlighted but if I expressly attempt to highlight a word with the highlighter it won't do it.
Do you have any suggestions as to how I might further massage the data? -
Unable to access Admin Tools for portal after configuring LDAP realm
After setting weblogic to use the LDAP realm I am unable to access the Administration Tools. It does not take the username "administrator" and password "password". I've created the SystemAdministrator Group in LDAP as well as the appropriate "administrator" user but it still does not let me access the Administratotion Tools.
This thread is being discussed in the weblogic.developer.interest.portal
newsgroup under the same title. You can cross-post to multiple groups in
the future so that the thread develops in all newsgroups that you posted to.
"Wendy Kajiyama" <[email protected]> wrote in message
news:[email protected]..
After setting weblogic to use the LDAP realm I am unable to access theAdministration Tools. It does not take the username "administrator" and
password "password". I've created the SystemAdministrator Group in LDAP as
well as the appropriate "administrator" user but it still does not let me
access the Administratotion Tools. -
Unable to use some tools...
hello I am currently using a galaxy s3.I'm having problems using the tools in the user interface.when I try to collect some of the tools it go off screen. because of this some of the tools are not visible and I am NOT able to select some of them. otherwise I really like this out what is there a way to fix it?
Hi,
I would try to exit the document/project with the back button so that you don't lose any work.
Then you can retry to enter and see if it works. If that doesn't work please try to restart the application.
thanks,
Ignacio -
Unable to use gradient tool on placed photo Photoshop CS Trial
I placed a jpg photo over another photo and attempted to use gradient tool tool but it indicated cannot smart object cannot be edited directly. It gives me a circle with a line through it with this statement. I am operating a trial version of CS5 on Windows XP. What am I missing. Use to use CS3 and Photoshop 5.0. Must be another step. Cannot answer.
You could double click on the smart object icon to edit the smart object contents
or rasterize the the smart object.
You could also use a gradient overlay layer style or gradint fill adjustment layer.
More about smart objects:
http://help.adobe.com/en_US/photoshop/cs/using/WSCCBCA4AB-7821-4986-BC03-4D1045EF2A57a.htm l
MTSTUNER -
hi, I'm also having an issue not being able to use the 3D tools in CS6. Here's what my system info says; I went and downloaded the latest driver for my NVIDIA GEForce GTX260 but the 3D options are still greyed out. Any help would be greatly appreciated, thanks!
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2672 MHz
Built-in memory: 9207 MB
Free memory: 6383 MB
Memory available to Photoshop: 8161 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 260/PCIe/SSE2
Display: 2
Display Bounds:= top: 30, left: 1920, bottom: 930, right: 3520
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 260
OpenCL Unavailable
Driver Version: 9.18.13.1422
Driver Date: 20130314000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 260
Video Card Memory: 896 MB
Video Rect Texture Size: 8192
Serial number: 92298109479352941517
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Robdawg\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.5G, 721.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.4
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Entropy 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Maximum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mean 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Median 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
Minimum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Range 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Skewness 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Sumi-e 13.0
Summation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEDisplay: 2
Display Bounds:= top: 30, left: 1920, bottom: 930, right: 3520
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
You have 2 displays/ virtual desktops with different sizes and it's exhausting your hardware resources.
Mylenium -
Unable to use navigation tools in Google street view
All of a sudden I have found that when using google maps, I cannot use the navigation tools in street view, other than double clicking which zooms into the picture. Also when in map mode and zooming in, it does not zoom smoothly - rather a shudder and simultaneous zoom. I have tested this out in Google Chrome and Firefox and maps work just fine.
I have repaired permissions, reset Safari, reinstalled Safari, reinstalled Flash, and even deleted the arial fonts (which I read fixes a similar problem), but nothing works.
The only thing that I can think of is that I downloaded another version of Safari so I could test out the tabs at the top of the window. However since the I have deleted that version and reinstalled Safari (v 4.0.4)
Any suggestions as to what I could try next, without having to reinstall 10.6??That toolbar/ct plugin seems to cause problems for all who install it!
Locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is your the root library on your Hard Disk. -
Unable to Use Adjust Tool or Effects Tool
I'm using iPhoto 7.1.5. On my MacBook Pro, when I go into edit mode and click on either the Adjust tool or the Effects tool, nothing happens. No windows open to allow me to edit with these tools. The other tools (red eye, enhance, retouch, crop) work just fine.
I've tried trashing the plist file for iPhoto and also tried logging in as a different user, but the problem persists. Any help would be most appreciated!Before you re-install:
Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
As a rule, no, re-installing the app will not affect the Library.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applcations Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD
Regards
TD -
Unable to use remote tools on two computers
Hello All
I cant seem to use the Remote Tools feature on two of our pcs. They are giving the exact same error below. All of the prereqs are in place. Any thoughts on this? Or logs I could look at?
Thanks.
Firewall disabled
SCCM Remote tools account are in local admin on the computer
Phil BalderosNo, a manual client installation and manual running of the Machine Policy Retrieval & Evaluation Cycle, will not make any difference here. The client does not know how it was installed, or the actions were run. So as long as the client got installed
correctly, and can download policies, it should be fine.
Personally, since it is two clients only, I'd reimage the two systems. I've seen numerous threads and cases where a feature doesn't work, but are resolved with a reimage of the computer. Harsh, but usually works. You could certainly try uninstalling the
Configuration Manager client, then reinstalling it again first.
Wally Mead -
Unable 2 use start up key commands after installing TechToolPro (dvd stuck)
Hi
After i installed Tech Tool Pro on my new MacBook and restarted, i can not seem to get past a blank screen and endless noise of a spinning DVD,
I tried Com +V, T, Pram, option but not any start up commands seem to work on this MacBook..
Please Advise
Thanks
LarryCome back and tell us or give a link. Glad you got it solved.
-
Unable to use installed Flash Builder 4 after having uninstalled Trial
I have been using the Flash Builder 4 trial for a while now, and have since purchased a version of the software to use on my project. However, despite having uninstalled the trial version and run the recommended registry cleaning scripts, whenever I install the purchased version of Flash Builder 4 and try to use it, I see the splash screen for the trial version coming up.
It has an option to enter a serial number, six sets of four digits each, but the serial number on the back of the my Flash Builder 4 disc case is only eight digits long total, and doesn't fit that space. Even then, I would not expect to see the splash screen, which explicitly mentions the trial, coming up after having uninstalled the trial.
If in uninstall the paid version, running eclipse does not cause the splash screen to appear. However, as soon as I do install it, and try to run with it, the trial version spalsh screen appears again.
I had asked for help preivously, case number: #0203692609
But the registry cleaning programs I was recommended there have not stopped the issue.Hi Richard,
I think the serial number keys are always 24-digits long, so the 8-digit number you found must be something else. If you look around at the rest of your product packaging, you should be able to locate the 24-digit number you can use.
More info here:
http://kb2.adobe.com/cps/828/cpsid_82828.html
The Trial mode you're seeing is expected until after you activate the product with your SN.
-Chris -
Ipod touch. Unable to use conversion tool on itunes 10.0
I bought the newest ipod touch you can get at the apple store a few days ago (the one with the facetime), and today I synced it. I was able to add music to my ipod touch, but my problem is two things: Converting video to the ipod touch and the part "create ipod or iphone version" is unclickable in the advanced menu if itunes. I don't know why I am unable to select "create ipod or iphone version" in the advanced menu and I do not understand why itunes is now allowing me to convert video formats so that I can watch videos on my new ipod touch.
I also have the latest version of itunes (10.0) and updated my ipod.
I buy all my music and the videos I have are either ones I bought or from a christian church who allow people to use them as podcasts for free. The format I want to convert is wma.
So please PLEASE help me with this. I would appreciate it. Thank youRmdy wrote:
... I was able to add music to my ipod touch, but ... "create ipod or iphone version" is unclickable in the advanced menu if itunes. I don't know why I am unable to select "create ipod or iphone version" in the advanced menu ...
Go to your iTunes Library > Movies window and click (to select it) one of the videos you want to convert.
Then check the iTunes > Advanced menu again to see if "create ipod or iphone version" is "clickable" now.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1 -
PS. I am on Mac OS 10.9.3
Hi sethup,
Have you uninstalled Acrobat 8 before installing Acrobat 11?
Did the installation for Acrobat 11 go without any errors?
If yes then it might be an issue with the licensing. We might have to check the amt3.log file.
Do you face the same issue when you try to launch the application in the root user account as well.
Refer : Enabling and using the "root" user in Mac OS X
Regards,
Rave -
Unable to start agent on RAC target after installation
Hi All,
I have just finised installing agent on solaris 10 RAC to be monitored by grid control 11g,but the agent will not start.
I installed the agent as the oracle user
I get this error when I try starting the agent.
-bash-3.00$ pwd
*/u01/app/oracle/agent11g*
-bash-3.00$ ./bin/emctl start agent
EM Configuration issue. /u01/app/oracle/agent11g/node1 not found.
-bash-3.00$
Please helpHi,
Make sure that you have set all your environment variables properly before starting your agent service.
thanks,
X A H E E R -
"HCL Me u1 tab" I am unable to use firefox in it. After Installation can see firefox icon in widgets b8 not in apps.
Nikki2012,
I would guess that you have some filter applied in your apptray. Try to disable it in order to view all apps.
Also you can use google play to run the installed apps. Open it, search for "firefox", and hit "open".
Let me know if it helps.
jm
Maybe you are looking for
-
How to Print new line in Acrobat SDK?
I was use "\n" in end of string in PDETextAdd, but its doesn't go for new line.Any one help me pls...
-
Oracle.apps.fnd.cache.CacheException in login page
Hi, i wrote one method in am and return that values to co and the following is the code in AM public String Status(String reqid){ String Status2=null; String Status; while(Staus.equals("I")||Staus.equals("R")||Staus.equals("P")) try{
-
How to write empty line in text file
hey i want to insert one empty line in text file. how to write this. i declared data: emptyrec(240) type c value space, and used TRANSFER emptyrec to e_file. but its not inserting empty line in the record. is there any special way have to do. ambicha
-
Magma-box and DAQ PCI 6034E card
I had installed a magma-box (64-bit 2 Slot Series) on my laptop. And I installed NI-DAQ 7.1. Than I had plug the PCI-6034E card in the magma-box. My laptop identify the PCI-6034E daq card in the Device Manager; but with a yellow exclamation point and
-
Whether will be HTMLDB 1.6.2?
When, if will be? Or it is necessary to wait already at once version 2.0?