Unable to use SEND or REPLY button to send emails

I am able to recieve emails fine. For some reason trying to send emails suddenly just stopped. I get no time outs or authenification errors but when I hit send or reply button, nothing happens. Please help.

The problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

Similar Messages

Since I've updated to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.

Since I've updated from iOS 5 to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.
This is working fine for albums but are broken for audio books.
The back button refers always to the first chapter of the audio book (very annoying if you are in the middle of an audio book) and the nex button goes one level higher back to the selection of the audio book itself.
In iOS 5.0 it was still possible to navigate throught the audio book chapters using these buttons.
This still happens in iOS 6.1.
Is this a known bug?
Does any solution exist?
Thx,
Oliver

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

How to filter emails using sender email adapter

Hi,
Does any one know how to filter emails of mail server using Sender email adapter(POP3 protocol ) in PI .
To make it more clear let us assume that there are 10 emails in the email server then 3 emails should be fetched for Interface A , 3 emails Should be fetched for Interface B and remaining 4 emails should be ignored and left in the email server as it is , the reason for this is that it is not related with the Interface A or Interface B. Any suggestion or solution will be much appreciated.
Thanks & Regards
Prabhat

Hi,
I guess you didnt get my requirement clearly. My requirement is how to filter emails from email server using sender Email adapter in POP3 protocl and pass it to relevant Interface.
For ex: suppose email no.1 is related to Interface A then it should go to Interface A
or email no. 2 is related to Interface B then it should go to Interface B
or if email no. 3 is junk mail then it should avoid deleting that email and leave that email as it is
The problem/challenge here is that email adapter of Interface A or B reads it first and deletes the email message so it is not available for the Interface A or B.
So I just want that sender email adapter should filter it before deleting email from the email server.
Can you provide some solution for this?
Thanks & Regards
Prabhat

How to avoid repeated emails using send email tasks in package?

Hi,
I have package with two sqeuence containers which are not connected.So when I was using send email tasks I was getting repeated emails like 5 to 6 emails.So, can someone hep me on this.How can we avoid repeated emails.
Regards,
Sudha
sudha

See this example on preventing executing a task within an Event Handler:
http://microsoft-ssis.blogspot.com/2014/07/prevent-events-executing-multiple-times.html
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Unable To Use Signature To Reply To Text Emails

Hello. I am using Outlook 2013 which is configured with Exchange. If I receive an email that is 100% text, it will not use my Reply signature. Is this because the sender is preventing HTML on responses?

Hi,
Firstly please check the following setting in Outlook.
Click File>>Options>>Mail>>Signature
Under Choose default signature, check if there is signature in
Replies and forwards dialog.
After that, what’s the content of your signature?
When we reply an email, the email format will follow the original email format. If the signature is a picture, the picture will not show up in the plain text email. However, when we reply the plain text emails, we can set the message format under
FORMAT TEXT menu. Then the signature should show up.
Best Regards.

Unable to receive/send emails from my iPhone when away from home.

I have been unable w/ in the past week or so to send emails from my iphone once I am away from my house, if I am home there is no problem because it jumps onto my wireless but outside it wont let me I have always been able to until lately.
What should I check, where should I go, what should I do, who should I call?????

Allan Sampson wrote:
How often do you power your iPhone off and on, and when was the last time you did a Reset?
It is a good idea to power a GSM smart phone off/on on a daily basis - I do so first thing each morning, and I usually do a Reset once a week or so, which seems to help get rid of any cobwebs so to speak.
Alan:
A little bit OT, but can you enlighten me what the difference between a cold start (powering off once a day) and a reset is? On a desktop computer, there is no difference, at least in terms of clearing the "cobwebs."
Thanks,
-dan

Using send email step in workflow

Hi Experts,
I have a question regarding the send email step in workflow.
We have the Receipient Type as Organizational Object and Expression as &WF_INITIATOR&.
I want to know if the mail will be sent to the SAP email ID (i.e) in SBWP or will be it be sent to the Outlook email ID.
We want to send it to the Outlook email ID of the User. Can you guide us as to how we can do the same.
In some cases, we want to send the notification to both the employee and his manager. Can this be managed through the SEND EMAIL step in the workflow or do we have to explicitly create a method and use a std FM that sends the email to the concerned.
Request your help on the same.
Cheers,
Belinda Clarke

>We are getting the pernr of the employee. We can retrieve his email address for the same. So do we need to pass this to a workflow container and then use that workflow container value in the space provided for the email address.
Yes. It is really up to you how you will develop everything. I personally like to get all the data into the workflow container, because it might be handy later in the life. Let's say that you go on with your custom email sending step and add there the code the get the data that you need in the email. It will work perfectly. But let's say that after six months the HR administrators want to get emails with a bit different content from this same workflow. Now you will need do another custom step. But if you had already all the data in the container you can simply add another standard email step and formulate the text with the editor and add the variables from the workflow container. Easy and simple.
So, my advice is that for example add just add some background step to get all the possible data regarding the employees & leave request & managers or whatever. Now you have everything in the container and you can use them in the email(s) - and you can use them in other places too - for example in the work item texts, etc.
Regards,
Karri

How to remove error 59 which occurred while using Send Email Using Smtp Client .VI in Labview 2013.

Hi,I am trying to run Send Email Using Smtp Client .VI in Labview 2013 examples ,but it gives error 59.Please can anyone suggest how to remove the error.The printscreen is attached below.
Solved!
Go to Solution.
Attachments:
error.docx ‏310 KB

Thanks for the help,but i have set the parameters right but still it does not work for me.Please suggest me reasons and how to correct them.
Attachments:
error.docx ‏270 KB

I am unable to use the publish photo button because it is grey. What can I do to fix this?

I am unable to publish photos on iphoto. The button is grey. I recently changed my password on facebook. What can I do to use my publish button again.

Ralph 9430, simplify for us dummies...define device ? ios is a what ...just a slow step by step explaination if you could..
Thank you in advance 2-20-2013

Unable to use the "Alt Gr"-button

Hello,
I've just installed Arch again after being on W7 for 2 last year.
But it seems that the "Alt Gr"-button wont work properly.
I'm using LXDE and I've tried to find an answear about the problem but so far nothing.
The layout I am using is se_SV and the Alt Gr button is essencital for us sweds since it is in the combaination to typ the @-sign.
I believe that the keyboard works properly outside LXDE so I would assume that the problem envolvs around LXDE.
Any ideas?

Solved:
The default xmodmap is useless for swedish keyboards since most keymappings looks like this:
keycode 11 = 2 quotedbl 2 quotedbl at twosuperior
This is the mapping for key the "2". The symbols after the '=' is:
2: produces '2' by typing 2 without modifier
quotedbl: produces '"' by typing 2 with shift
2: produces '2' by typing 2 with Multi_key (Alt_Gr)
quotedbl: produces '"' by typing 2 with shift+Multi_key (Alt_Gr)
The rest of the mappings is unaccesible for my keyboard. See the problem?
Changing the keycode mapping with
xmodmap -e "keycode 11 = 2 quotedbl at twosuperior"
gives
2: produces '2' by typing 2 without modifier
quotedbl: produces '"' by typing 2 with shift
at: produces '@' by typing 2 with Multi_key (Alt_Gr)
twosuperior: produces '²' by typing 2 with shift+Multi_key (Alt_Gr)
To do the same for all relevant keys I kopied the keymap
xmodmap -pke > ~/.xmodmaprc
I edited the ~/.xmodmaprc file like above for all relevant keycodes and then loaded the file with
xmodmap ~/.xmodmaprc
on startup wia the autostart script for the LXDE session

I was browsing in Firefox, and all of the sudden, I am unable to use the pgup/pgdown buttons in FF. However, I am able to use them in Internet Explorer, and in other programs. Can you please help?

The "home" and "end" keys work, but not the pgup/pgdown. It's not a problem with the keyboard, since those keys work in any other program I try.

caret caret (F7) problems, Most keyboards have overlaid keys, make sure NumLk is off as that can also interfere. "PgUp", "PgDn", "SpaceBar", "Home" and "End" keys" not working -- caret cursor F7
*https://support.mozilla.com/en-US/questions/845663

Cl_bcs using send email notifications?

cl_bcs Using these Clsaa & Methods send Notification Or Sample text??? Ex : 'Hello'
i don't have a idea how to use these class and methods.
plese give me an idea about that.

Hi All,
Please help.
Thanks,
Siddharth

Unable to Use my phone to connect to my email, web browser, ap worldand social medias BB8900

Good day!May I ask for an assistance in how to set up my phone so that I can browse internet. One customer rep tell me that I need to call Blackberry to do something regarding this matter. May phone bought in Middle East and my brother used this but it was working but HERE in the Philippines It wasn't able to connect to browse.

Please see here: BlackBerry Packages
Contact Smart to know More about their Promos. Also, Make sure your phone is unlocked (open line). See How to check if my BlackBerry is locked?
Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Unable to send email to the users from Project Server Workflow

Hello all,
I am facing issues in sending emails to the users from the workflow in SharePoint Designer 2013.
I am trying to send emails to valid users in a Project server 2013 Workflow by Email action.
I have set up the SMTP server successfully, I have configured SMTP server successfully in IIS manager 6.0
I have configured the outgoing e-mail settings in Central Administration successfully,
I have configured the SMTP email settings for my web app in IIS manager as well.
I have configured and synced the User Profile App with the eMail addresses from Active Directory as well.
I have configured the Alerts and Reminders in Operational Policies of PWA settings as well.
I can send the emails to the users successfully through Powershell.
But when I am trying to Start a Task Process with a user in the workflow, the task process starts but it never sent an email notification. So I tested by using the Action Email, that also the user is unable to receive any email. But the Workflow is not giving
any error also. The email sending is successful, but the user is unable to receive it. The workflow succeeds to next phase without any errors.
So to cross verify I tried 'Alert Me' option on a list, but that also is not sending(or might be sending but the user is not receiving) the mail.
What else should I do to solve this issue.
Please help me.
Thanks,
Shanky

Hello Paul,
I tried editing the PWA instance as you said, but that also didn't help :(
I even restarted the Project Server Service, but nothing is changed.
I tried creating a new workflow for a List and used send email there, but that also is not sending the mail :(
How do I check where the issue is from ? I mean, whether the workflow is sending the mail and the mail server is not receiving? or whether the workflow is not sending the mail itself? how do I check this? Is there any way to log these details?
Please help me regarding this issue, I am totally clueless how to proceed.
Thanks,
shanky

Unable to use VL06O

Hi all,
We upgraded R/3 to ECC6.0 from 4.7 .
since then we are unable to use List Outbound Deliveries button(which is a last button in this Tcode) in <b>VL06O</b> .
we are getting a mesage that you are not authotised to use VL06F Tcode.
plz help me.
Regards,
Raja

Thanks Juan,
But the problem is in 4.7 we didn't give the auth for VL06F directly with S_TCODE obj. User will given VL06O with that he used to go the screen of VL06F.
Is there any change in this tcode from ECC6.0 onwards.
Is there any way to access VL06F indirectly from VL06O as I said in my query
Regards,
Raja

Unable to use SEND or REPLY button to send emails

Similar Messages

Maybe you are looking for