Unable to use Un-End dated Responsibility

Hi All,
Having a bit of a problem un-end dating responsibilities within existing user records.
Step1. Assign responsibility to a user
Step2. End date responsibility on user record
Step3.Delete end date from responsibility from user record
This is constantly causing problems with user access. We also run the Sync tables report, but this does not appear to give us any success, any tips would be greatly appreciated.
Simon

Have a look at the following thread:
User Responsibility on User profile in Sys Admin
User Responsibility on User profile in Sys Admin

Similar Messages

Oracle application r12 Shows End dated Responsibility

Hi,
I am using R12.1.2 Oracle E Business suit. I have couple of responsibilities with same name (Small letters and Caps Letter name). after disabling (End-Dated) All lower case responsibilities also i am able to see all these end-dated lower case Responsibilities via> System Administrator >profile>system
Is there any method to hide/delete these end dated responsibilities.
Thanks,
Vishal

Hi,
Is there any method to hide/delete these end dated responsibilities.
i want to hide that end dated responsibility.Deleting responsibilities/User cannot be done as this would cause referential integrity issues.
There is no direct way to hide end dated responsibilities, but you may try forms personalization to achieve that.
By the way, what is the point of hiding responsibilities?
Thanks,
Hussein

End dated responsibility are visible once login as sysadmin

Dear Gurus,
There are some responsibilities are End-Dated for the user SYSADMIN.
But once i login as sysadmin user i can see all the responsibilities are present in the Navigatior responsibility tab.
It took a long time for login as sysadmin user.
Is this the reason because there a more number of responsibilities are atteched to SYSADMIN user?
I have checked the responsility most of them are end dated but they refelect in the responsility tab.
Please suggest me ...
Thanks

Hi,
Please review the following notes:
End Dates are Populated for All Responsibilities (Doc ID 743408.1)
End Dated Responsibility Still Appears when User Logs On (Doc ID 780392.1)
User Responsibility Assignment End Date Not Immediately Effective (Doc ID 1551779.1)
Unable To End-Date a Responsibility Assigned To The User (Doc ID 1348270.1)
Thanks &
Best regards,

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to view end dated supplier (Employees set up as supplier)

Hello All,
Recently we upgraded from ORacle R12.1.2 to R12.1.3, after this we are not able to query for an supplier which is end dated earlier. The end dated suppliers are actually employees set as suppliers for the sake of iExpense.
If anyone has encountered this error before kinldy let me know of how to handle this.
Thanks and Regards,
Shiva

Hi Shiva,
We currently have the same issue. It would be helpful if you can let us know how this issue was resolved at your end.
Thanks & Regards,
Supriya

Web dispatcher "Error : PSE file ,unable to use! "

Hello,
I has a SAP Netweaver kernel 7.01 with oracle database.
I tried to config web dispatcher to support ssl by following the link below.
[http://help.sap.com/saphelp_nw04s/helpdata/en/39/09a63d7af20450e10000000a114084/content.htm]
I has done all step successfully.
But when I started web dispatcher I got these error in the log file.
[Thr 8688]   profile param "ssl/server_pse" = "E:\webdispatcher\sec\SAPSSL.pse"
           resulting Filename = "E:\webdispatcher\sec\SAPSSL.pse"
[Thr 8688] *** ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\webdispatcher\sec\SAPSSL.pse": unable to use! [ssslsecu.c   1735]
[Thr 8688] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 8688] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 8688] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
[Thr 8688] << ---------- End of Secude-SSL Errorstack ----------
[Thr 8688] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\webdispatcher\sec\SAPSSL.pse" [ssslxxi.c    2324]
[Thr 8688] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 8688] =================================================
I search the forum but didn't see "file pse unable to use!" issue.
Is this about wrong certificate when import cer to PSE file or something else?
Any help will be appriciate.
Thank you
Chai

Hi,
I am facing same issue.
Please revet, if you resolved the same.
pasting log here.
Response will be appreciated.
trc file: "dev_webdisp", trc level: 1, release: "720"
sysno 00
sid WD1
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7200
patchlevel 0
patchno 68
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
profile /usr/sap/WD1/SYS/profile/WD1_W00_sapportal
pid 4382
[Thr 140272010733408] Fri Nov 1 11:41:50 2013
[Thr 140272010733408] started security log to file ./dev_icm_sec
[Thr 140272010733408] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 140272010733408] SAP Web Dispatcher running on: sapportal.abrajoman.com
[Thr 140272010733408] MtxInit: 30001 0 2
[Thr 140272010733408] ***LOG IM1=> IcmInit, Startup (SAP Web Dispatcher&sapportal.abrajoman.com&4382&) [icxxrout_mt. 1914]
[Thr 140272010733408] IcmInit: listening to admin port: 65000
[Thr 140272010733408] MPI: dynamic quotas disabled.
[Thr 140272010733408] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 140272010733408] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 140272010733408] CCMS: Initalized shared memory of size 40000000 for monitoring segment.
[Thr 140272010733408] CCMS: Checking Downtime Configuration of Monitoring Segment.
[Thr 140272010733408] IcrCoreInitSessionTable: Session table initialized
[Thr 140271863756544] HttpExtractArchive: files from archive /usr/sap/WD1/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/WD1/W00/data/icmandir are up to date
[Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpAdminHandler(0x7f9390000e70), slot=0, flags=36869) for /sap/admin, active: 1, table 0x7f9390000a10
[Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpModHandler(0x7f93900012e0), slot=1, flags=12293) for /, active: 1, table 0x7f9390000a10
[Thr 140271863756544] CsiInit(): Initializing the Content Scan Interface
[Thr 140271863756544] AMD/Intel x86_64 with Linux (mt,ascii,SAP_CHAR/size_t/void* = 8/64/64)
[Thr 140271863756544] CsiInit(): CSA_LIB = "/usr/sap/WD1/SYS/exe/run/libsapcsa.so"
[Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpAuthHandler(0x7f9390001440), slot=2, flags=12293) for /, active: 1, table 0x7f9390000a10
[Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpWebDispHandler(0x7f9390008340), slot=3, flags=1060869) for /, active: 1, table 0x7f9390000a10
[Thr 140271863756544] Started service PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 140271863756544] =================================================
[Thr 140271863756544] = SSL Initialization platform tag=(linuxx86_64_gcc41)
[Thr 140271863756544] = (720_REL,Oct 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 140271863756544] profile param "ssl/ssl_lib" = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 140271863756544] resulting Filename = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 140271863756544] = found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,AESNI,NB
[Thr 140271863756544] = current UserID: "wd1adm", env-var USER="wd1adm"
[Thr 140271863756544] = using SECUDIR=/usr/sap/WD1/W00/sec
[Thr 140271863756544] profile param "ssl/server_pse" = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] resulting Filename = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] *** ERROR => secudessl_Create_SSL_CTX(): PSE "/usr/sap/WD1/W00/sec/epssl.pse": unable to use! [ssslsecu_mt. 1735]
[Thr 140271863756544] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 140271863756544] secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 140271863756544] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 140271863756544] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 140271863756544] << ---------- End of Secude-SSL Errorstack ----------
[Thr 140271863756544] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "/usr/sap/WD1/W00/sec/epssl.pse" [ssslxxi_mt.c 2324]
[Thr 140271863756544] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 140271863756544] =================================================
[Thr 140271863756544]
[Thr 140271863756544] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 140271863756544] *** ERROR => IcmServInitSSL: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv_mt. 251]
[Thr 140271863756544] *** WARNING => Could not start service (rc=-14) PORT=8300,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=900,VCLIENT=0 [icxxserv_mt. 651]
[Thr 140272010733408] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 0
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 1
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 2
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 3
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 4
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 5
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 6
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 7
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 8
[Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 9
[Thr 140271863756544] IcmWatchDogThread: watchdog started
[Thr 140271847081728] Fri Nov 1 11:42:57 2013
[Thr 140271847081728] *** ERROR => NULL bytes in HTTP request {0005000c} [http_plgrt_mt.c 6025]
[Thr 140271847081728] CONNECTION (id=5/12):
used: 1, type: default, role: Server(1), stateful: 0
NI_HDL: 59, protocol: HTTP(1)
local host: 192.168.22.2:8100 ()
remote host: 192.168.2.8:56650 ()
status: READ_REQUEST
connect time: 01.11.2013 11:42:57
MPI request: <c> MPI response: <d>
request_buf_size: 65464 response_buf_size: 0
request_buf_used: 122 response_buf_used: 0
request_buf_offset: 0 response_buf_offset: 0
[Thr 140271847081728] Address Offset REQUEST:
[Thr 140271847081728] ------------------------------------------------------------------------
[Thr 140271847081728] 0x7f9399f8d068 000000 16030100 75010000 71030152 73499529 |....u...q..RsI.)|
[Thr 140271847081728] 0x7f9399f8d078 000016 9f988ed3 cb861e2f 7260cac7 978a9a30 |......./r`.....0|
[Thr 140271847081728] 0x7f9399f8d088 000032 b74f3103 f3feea03 2b336a00 0018002f |.O1.....+3j..../|
[Thr 140271847081728] 0x7f9399f8d098 000048 00350005 000ac013 c014c009 c00a0032 |.5.............2|
[Thr 140271847081728] 0x7f9399f8d0a8 000064 00380013 00040100 0030ff01 00010000 |.8.......0......|
[Thr 140271847081728] 0x7f9399f8d0b8 000080 00000e00 0c000009 73617070 6f727461 |........sapporta|
[Thr 140271847081728] 0x7f9399f8d0c8 000096 6c000500 05010000 0000000a 00060004 |l...............|
[Thr 140271847081728] 0x7f9399f8d0d8 000112 00170018 000b0002 0100 |.......... |
[Thr 140271847081728] ------------------------------------------------------------------------
[Thr 140271847081728] *** ERROR => HttpPlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2250]
Trace File
   (7784bytes)
Line: Filter:
Thanks,
Kundan

Auto User Creation on Hire, and Auto User End Dating on Termination

Hi Everyone,
We are using HR and OTL in an environment with very high employee turn over. Currently we need to create a user and assign an OTL responsibility so that employee timecards approve in OTL. At the moment, we do it manually (ie HR ask the sysadmin to create a user and add the resp).
Does anyone have any suggestions on how we might automate this? Ie when an employee is created in HR, a user is created and the OTL responsibility is added. Additionally, how can we have the user and resp end-dated when the employee is terminated?

Hi
Please see this note - Batch Creation Of User Accounts [ID 226738.1]
You can use User Hooks to automatically assign OTL responsibilities.
Srinivasa

In an Multi Record Block last previous record should be end dated

Hi all,
can any one help me in this,.....
i a multi record block i need to end date the last previous record,..
Thanks
Raj

Raj,
My guess is that you would want the previous record end-dated even if the user uses a Hot-Key to save the record in addition to using the SAVE button. That being the case, I would add or alter the Pre-Insert trigger on the block to update the find the record that does not have an end-date and update the end_date to SYSDATE. This assumes that there will always only be one record that needs to be end dated. If there are more than one, each record will have the end_date updated. Using your data, you can accomplish this a couple of ways. The first would be to simply update the base table using a simple update statement in an Anonymous Block in the Pre-Insert trigger:
BEGIN
   UPDATE verify_table
      SET enddate = sysdate
    WHERE enddate is null;
END;Second, you could loop through the block in the Form and update any records where the enddate is null.
BEGIN
   GO_ITEM('MYBLOCK.FIRST_ITEM');
   FIRST_RECORD;
   WHILE :system.last_record = 'FALSE' LOOP
       IF :myblock.enddate is null THEN
          enddate := sysdate;
          EXIT;
       ELSE
          NEXT_RECORD;
       END IF;
   END;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT1414 I attempted to update my iphone 3 through I tunes - I think I did a back up on my pc - I am now unable to use the phone at all - it cannot be turned off and seems to be syncing all the time, even when it is not connected to itunes.

I attempted to update my iphone 3 using itunes. I'm not certain but I believe I did a backup on my pc first. I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive. I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc. I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?

Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it. If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
You can check in iTune to see if you have a backup. They are listed in iTunes>Preferences>Devices. However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists.

Unable to use ref cursor as a input parameter at the time of inserting reco

Hi
i am unable to use ref cursor when inserting the data to oracle 11g from visual studio 2008. please help me as early as possible my code is bellows
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using System.Web.Configuration;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
public partial class App_frmTest : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
protected void btnClick_Click(object sender, EventArgs e)
OracleCommand cmd=new OracleCommand();
Data objdata = new Data();
int i = 0;
string constr = "Data Source=Cwc;User Id=scott; Password=tiger;";// enlist=false; pooling=false;
OracleConnection con = new OracleConnection(constr);
/*Connection Open*/
con.Open();
cmd.Connection = con;
/*Connection Open End*/
/*Select Through Ref Cursor*/
cmd.CommandText = "scott.TEST_USER.getUSER";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter p_rc = cmd.Parameters.Add("p_rc", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Output);
OracleParameter p_rc1;
if (TextBox1.Text == "")
p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, DBNull.Value, ParameterDirection.Input);
else
p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, Convert.ToInt16(TextBox1.Text), ParameterDirection.Input);
// OracleParameter p_rc1 = cmd.Parameters.Add("p_rc", OracleDbType.Int16, 2, ParameterDirection.Input);
OracleDataReader reader = cmd.ExecuteReader();
DataSet ds = new DataSet();
DataTable dt1 = new DataTable();
dt1.Load(reader);
ds.Tables.Add(dt1);
GridView1.DataSource = ds;
GridView1.DataBind();
cmd.Parameters.Clear();
con.Close();
con.Dispose();
OracleCommand cmd1 = new OracleCommand();
OracleConnection con1 = new OracleConnection(constr);
con1.Open();
cmd1.Connection = con1;
cmd1.CommandText = "scott.TEST_USER.ADDUSER";
cmd1.CommandType = CommandType.StoredProcedure;
OracleParameter P_ADDUSER = cmd1.Parameters.Add("P_ADDUSER", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Input);
cmd1.ExecuteNonQuery(); // i am getting error when executing this line
Server Error in '/CWC' Application.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source Error:
Line 77: OracleParameter P_ADDUSER = cmd1.Parameters.Add("P_ADDUSER", OracleDbType.RefCursor, DBNull.Value, ParameterDirection.Input);
Line 78: //OracleParameter P_MSG = cmd.Parameters.Add("P_MSG", OracleDbType.Varchar2, DBNull.Value, ParameterDirection.Output);
Line 79: cmd1.ExecuteNonQuery();
Line 80:
Line 81: DataTable dt = new DataTable();
Source File: d:\CWC\App\frmTest.aspx.cs Line: 79
Stack Trace:
[AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.]
Oracle.DataAccess.Client.OpsSql.ExecuteNonQuery(IntPtr opsConCtx, IntPtr& opsErrCtx, IntPtr& opsSqlCtx, IntPtr& opsDacCtx, IntPtr opsSubscrCtx, Int32& isSubscrRegistered, Int32 bchgNTFNExcludeRowidInfo, Int32 bQueryBasedNTFNRegistration, Int64& query_id, OpoSqlValCtx*& pOpoSqlValCtx, String pCommandText, IntPtr& pUTF8CommandText, IntPtr[] pOpoPrmValCtx, String[] ppOpoPrmRefCtx, OpoMetValCtx*& pOpoMetValCtx, Int32 prmCnt, Int32 bFromPool) +0
Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery() +4731
App_frmTest.btnClick_Click(Object sender, EventArgs e) in d:\CWC\App\frmTest.aspx.cs:79
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +111
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +110
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565

Hi;
Its better to ask it at visual studio forum site:http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio
Regard
Helios

Unable to use the keyboard in XP keys work OK when boot into dos

Unable to use the keyboard in XP. It was working for over a year OK with XP running
keys work OK when I install win98 or use a dos boot disk.
If I try to reinstall XP I can not use any of keys to input anything.
Return
Esc
CapsLock
ctrl-alt-del.
NO KEYS WORK AT ALL OTHER THAN
ë à
I did an upgrade from win98 but that did not work.
Any ideas

billwyatt, welcome to the forum,
I think you forgot to mention which ThinkPad you have. It would be even better if you could post the Type and Model Number as this will help members to hopefully help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

Why did Apple make the new iPod unable to use Griffin iTalk or iTrip?

I was so disappointed when I upgraded to the new 5th gen. iPod and was unable to use the accessories I purchased for my previous iPod. Am I missing something? What am I supposed to do? Is there an attachment that will make them usable? Why would Apple make a new iPod that wouldn't include the same connector?

See below your so-called answer to my question.
I also noticed you have marked it solved. If, as a moderator, you can say that your response was considerate of the people using the system then I guess it was solved. If I was to mark it I would say the reply was very condescending and thus worthy of a 1 out of 10 as far as a reply goes. In the future please do not answer my posts as I would like to be treated with a little respect as I'm sure you would like. Please get some other Mod who can perhaps relate to a person's concern. Your answer may be correct but your way of putting it across sounds like some of the 13 year old school children I use to teach.
You have a good day.

SQL Query - To Find Users with end dated responsibilities

Oracle Apps ver: 11.5.10.2
Oracle DB - 9i
How can i list users and the access assigned to them for a specific division irrespective of the responsibility being end dated at responsibility level

Hi Sakshi,
Try out this query if it can help you !
SELECT a.user_name, a.description, c.responsibility_name, c.creation_date as ASSIGNED_DATE>FROM apps.fnd_user a,
>apps.fnd_user_resp_groups b,
>apps.fnd_responsibility_vl c
>WHERE a.user_id = b.user_id
>AND b.responsibility_id = c.responsibility_id
>AND a.creation_date < = '01-JUN-07'
ORDER BY a.user_name;Thanks,
Anchorage :)

Unable to use Un-End dated Responsibility

Similar Messages

Maybe you are looking for