Unable to use USPS with Safari 7.0.1 or Mavericks

Hi, Today I tried printing a label with postage at the USPS website. I was unable to proceed off the first page even though all my account info is present. Anybody else have this problem? I'm using Safari 7.0.1 and Mavericks 10.9.1. Website says I must use IE 8. When did that happen!

Solved my own problem. You now have to enter a package value in order to proceed with Click N Ship

Similar Messages

McAfee SiteAdvisor is no longer working with my Safari 8.0. I never had trouble using it with Safari before this latest version. Has anyone else had this problem?

McAfee SiteAdvisor is no longer working with my Safari 8.0. I never had trouble using it with Safari before this latest version. Has anyone else had this problem? I contacted McAfee support and they said nobody else is reporting this issue.

Wow, life is certainly tough for you.
S***t happens. That's why there's a warranty.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years.

Using LastPass with Safari 6.0 and Mac OS X 10.7

I am considering using LastPass with Safari 6.0 and Mac OS X10.7. Preliminary due dilligence suggests various problems with loading and running the plugin with Safari 6.0 and Mac OS X which appear to be unresolved. I will greatly appreciate any user experience with LastPass on the current Mac OS and Safari platforms, as well as any suggestions (i.e., "tips") for installing and using the plugin (or another more compatible plugin). Thanks for your consideration.

Found this solution in another thread:
Solution was to stop rapport, quit and restart Safari, turn rapport back on, then quit and restart Safari, all now working.

I don't want to use Flash with Safari. What can I do to replace it?

I don't want to use Flash with Safari. What can I do to replace it?

I have same question

I get garbled text on web pages using yahoo with Safari 7.0.5

I get garbled text on web pages using yahoo with Safari 7.0.5 and have Maverick 10.9.4.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Unable to load page with Safari

My access to the internet with Safari has been incredibly slow recently, I think especially for sites that require a logon, secure or not, including my online banking, Wall Street Journal, Comcast Email. I get an unable to load error message after a long wait. I recieved a security update recently and I think the problem started about then. I have read this forum and tried what I could for slow Safari like resetting but without improvement. I can't access the Apple website because it takes too long to load. I can access iTunes.

Hi
Welcome to Apple Discussions
Secured sites are affected by the Keychain file contents, especially the X509 Anchors. Go to your Utilities folder>Keychain Access.app - open the application. On the left you'll see your various collections. Please confirm you see x509 Anchors. While there, go to the Keychain Menu>Keychain First Aid. Select, then enter your password and select "repair". If any errors appears, rerun until you get a clean pass.
If errors were present, restart the system, and try Safari. If no errors...
Another possible avenue of resolution is to reapply the 10.4.9 combo update. After the install/restart (don't use the computer for other tasks while the installer is running) "repair permissions" using Disk Utility in your Utilities menu.
Post back

Unable to use the with clause in oracle 9.0.2

Hi,
I need to use oracle SQL with clause in oracle 9.0.2 database. Its a 9i feature but i am unable to use it.
It is giving internal error, when i try to execute it.
Even for simple query:
WITH acct_summary as ( select TOT_COLL_AMT from tdc_acct)
select TOT_COLL_AMT from acct_summary WHERE TOT_COLL_AMT>100;
Error message while using 8.0.5 sql plus client:
SP2-0642: SQL*Plus internal error state 2091, context 0:0:0
Unsafe to proceed
Please help to find out why i am not able to use the sql with clause in oracle 9.0.2 database.
Thanks and regards,
Raajkathir

Hi Jens Petersen,
Yes, You are correct. Thank you very much.
Regards,
Raja

Unable to use PE9 with my Canon 5D Mark III

I could use some help please. When I try to download my new Canon 5D Mark III Raw into PE9 I get an error message telling me that PE is unable to open it because it is the wrong file type. My new Canon 5D Mark III lists the file type as ST8Axxxx instead of the normal IMG_xxxx that I'm used to. Can anyone tell me how to use PE9 with my Canon 5D Mark III camera? Thank you!

Hi,
The 5D MK III is not supported by PSE 9. It requires ACR 6.7 or 7.1 which will not apply to PSE 9.
You can either :-
1) Update to a newer version of elements
2) Use the Canon software to covert the raw files to TIF files and then import the TIF files
3) Download and install the free Adobe DNG Converter. Convert the raw files to DNG files and then import the DNG files into elements.
You can obtain latest dng converter from:
mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh
windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Hope it helps

I'm unable to use Fiverr with Firefox. Last year I was able to order Fiverr gigs and send messages inside Fiverr but for the last 3 weeks I've been unable to.

I'm unable to use Fiverr.com with Firefox. Last year I was able to order Fiverr gigs and send messages but for the last 3 weeks I've been unable to do either. I can login to Fiverr but I'm unable to use the service.
I'm using Windows 7.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Unable to use HD with usb shows errors on disc,

I have just bought a new airport extreme, and have conected it to my windows pc using a Belkin draft n adaptor, i am unable to use my 305gb maxtor 3200 0344, which is displayed in the setup utility as the above, but when i open the utility it tells me there are errors on the disc and to connect to my pc and run a disc repair, i have done this and there seems to be no problems, The airport disc agent does'nt seem to display it and is just blank, it is ntfs and on the box it said it is also apple mac compatable, any thoughts, thanx.

jask, Welcome to the discussion area!
Sorry but NTFS is not a supported format. You will need to reformat the drive. See KB 305038, AirPort Extreme (802.11n): USB storage device supported formats and protocols.

Leopard : Network : Unable to use DHCP with manual address.

After installing Leopard on my Macmini (PowerPC 1.42Ghz, 1GB RAM, 80GB HDD), I found my IP address obtains different IP address than Panther and Tiger use. Then I go into System Preferences -> Network -> select Ethernet -> select "Using DHCP with manual address" in the "Configure" combo box, and change the IP address from 192.168.0.8 to 192.168.0.100. Once I hit apply, the network connection never comes back. There is no complaint that another computer is using the 192.168.0.100 IP address. This works if I am using Panther or Tiger on the same computer.
Any help is appreciated.

Setting the DHCP to a number you want to use can be very useful in a busy environment. I usually choose to use numbers that are outside of the range of numbers being controlled by my router (Westell).
Port Forwarding for services like ARD, Azureus, or any server application break when the IP number changes for any reason.
Some routers will not allow numbers outside of a restricted range of numbers that can be set up in the router configuration menu's. In this case, I find out if the router is assigning numbers from the high or low end and make sure I assign numbers at the opposite end of the range.
My Westell router does allow me to use numbers other than the range of 50 numbers it has been told to use for DHCP, but I have also encountered problems when trying this on a wireless connection.

Unable to use SSO with universe connection on top of SAP BW query

Hi,
We're creating a universe on top of a SAP BW query by using universe designer.
We logon to universe designer by using SAP credential.
When creating the connection, we set the option "Use Single Sign On when refreshing reports at view time" in order to logon to BW server. But when clicking next, an error arises:
"DBD: Unable to connect to SAP BW server Incomplete logon data"
The strange thing on this is that there is one laptop which is able to set up this kind of connection, while all other workstations are not able to set it because they recieve that error (we all work against the same BO server). So this looks like an installation issue.
We reinstalled SAP Integration Solutions on those workstations, but problem is still the same.
I found thread: Universe Connection Authentication on SAP BW which talks about the same issue, but solution involves uninstalling Xcelsius. But we do need Xcelsius!
Any suggestions?
Thanks,
David.

>
Ingo Hilgefort wrote:
> Hi,
>
> - how did you enter the SAP credentials when logging on ?
username/password with sap authentication
>
> - are you using a application server or a message server for the connection ?
Application server
>
> - SAP GUI is installed ?
SAP GUI 710 patch 11
>
> - SAP Integration Kit is installed ? is it a full keycode or a temp keycode ?
SAP Integration Solutions with temp keycode
>
>
> thanks
> Ingo

Help! Can't use Hotmail with Safari 1.3.2 (v312.6)

Hello,
I'm using a 2003 Mirrored Drive Doors Pwer Man G4 operating on Mac OS X (10.3.9). To get online, I use Safari 1.3.2 (v312.6).
The problem is that I can't send nor read any emails from my hotmail account, and my computer doesn't support my Yahoo account.
I've tried installing Firefox, but for some reason, clicking on the Firefox icon to start the program does absolutely nothing.
Anybody got any ideas how I can use email without having have to drive to my mother's everyday?
Thank you very much in advance.

There may be a current or more recent version of Opera browser
which may be supported in Panther 10.3.9; few new browsers are
available for the older OS X versions. And your older Safari is not
a practical tool, since most protocols and security concerns have
passed that older one by. You may have to read some of the sites
where official downloads come from, for specific support info.
You may be able to get a Mac version of Firefox 2.0.0.16 or so,
from here: http://mac.oldapps.com/firefox.php
If ones you try don't work, note the vintage of OS X you are using.
The older browsers are no longer seeing security updates, btw.
So, there may be some risks associated with older products.
Camino 1.6.x browser appears to support use in 10.3.9 & Later:
http://caminobrowser.org/ - not sure what your hotmail needs are.
There is GMail for email, for free. It works well enough.
Good luck & happy computing!

Unable to use camera with MBP in cradle?

Happy New Year,
Posting this for my Dad, who finally saw the light and dove headfirst into the world of Mac: appears he is having trouble getting the camera on his 24" ACD to operate when connected to his cradled MBP. We're trying to use Skype or iChat AV, and though he can see me, I can't see him. Audio works fine, and we confirmed the mic on the ACD is being used when the USB is plugged in.
To isolate the problem, I had him disconnect his MBP USB cable from the display to operate the MBP as a stand alone laptop. We disconnected, he woke up his laptop after he opened it, I called him back, and voila- I was able to see and hear him fine on the MBP (green light is lit). He can also successfully see himself in PhotoBooth using either the laptop alone or with the ACD, so no problem there.
I read through a related post (http://discussions.apple.com/thread.jspa?messageID=10425681&#10425681) and two embedded Apple Support articles on the use of the camera, but before we pull the ol' SMC reset I want to make SURE I haven't overlooked something obvious. I know it shouldn't be this hard!
Thanks,
Eric

Thanks- answers to your questions in order:
-Not a dock, and no other piece of hardware involved- he just sets the laptop beneath the ACD in a small, plastic shelf;
-Good question. While on Skype with him, I was wearing headphones. The sound was quite rich and clear while we were talking with his MBP closed and hooked up to his ACD. Upon disconnect from his MBP I noticed that the sound had changed quite dramatically- more tinny and muffled. Then, when I asked him to reconnect the USB cable to his MBP I discovered quite loudly that the built-in mic is nearby, what with all the sudden noise coming from his fumbling with the cable.
-I confirmed with him that the lid is down on the MBP. He is running Apple Bluetooth keyboard and mouse.
Most interesting to me: when the MBP is hooked up to the ACD the Skype preferences page states that the camera is "unable to be accessed or is in use". Yet he is able to open up Photo Booth and take his own picture from the ACD camera. Hmmmm.

Unable to use USPS with Safari 7.0.1 or Mavericks

Similar Messages

Maybe you are looking for