Unable to use volume control ipod itouch 5.1.1

hello,
itouch didn't have a problem with volume slider until recently. through other websites, i have since located the volume slider in music playing mode by double tapping the home button and scrolling to the left but it lacks any button to scroll to increase the volume. music plays well via a sound dock but that has it's own volume controls. sometimes when docking it plays through the handset speakers until seated correctly so i know the internal speakers do work.
any light on the matter would be very much appreciated!!!

I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
Steve

Similar Messages

Plantronics Voyager 855 unable to lower volume during iPod playback

I wasn't sure if this should be in 3GS or music and video, so I figured I would pick one.
I have a 3GS 32gb running version 3.1. The problem I have is during iPod playback. My Voyager 855 locks the volume slider on the phone at half way. Using the volume control ON THE HEADSET, I can increase the volume and see the volume slider on the phone increase correspondingly up to the point that the music is very loud. But, when I try to turn the music down, again using the volume controls ON THE HEADSET, the slider on the phone will only go down to the halfway point. I can continue to click the volume down button ON THE HEADSET and the button will beep along with a split second decrease in volume but as soon as the button is released the volume has not changed-it remains at the halfway point. I have this problem with watching youtube videos, everything, EXCEPT for on the rainfall app that I have. I can increase/decrease the volume all the way up or down to the point that I can no longer hear the rain or until it is so loud it hurts my ears. This is very frustrating as I would really like to use this headset while reading and for sleeping, but the iPod function is just too loud. My friend has a 3G 8gb with the exact same headset and he does not have this problem. Is this a feature/limitation of the 3GS?

Yeah, ha ha, that is my post to Plantronics and their reply to me. I tried what you suggested and no go:
Un pairing, rebooting, and re pairing did not result in a fix. I still have the same problem. I tried it on my wifes phone-hers is running 3.1.3, and no-go, it had the same problem.
The volume slider works when the music is not outputed through the headset. When through the iPhone speaker, it works as it should-the volume is able to be adjusted up and down via the slider. Videos behave as they should, any program that needs to be adjusted via the volume slider or the rocker button on the side of the phone works as it should. To expand on what I stated eariler: while using the iPod function I can set the slider all the way to the left (volume 0), press the option for output and set it to the headset. When I do that, there is a split second where you can see the slider move from the left to the middle, and then the slider disappears. It's almost as though the headset is resetting the default/baseline sound level from 0 to 50 (if we are working on a 0-100 scale). I can increase the volume using the buttons on the headset, and I can lower the volume only to half way. If I then select the option for sound output and change it back to speaker, the slider reappears, and it is all the way to the left where I originally set it. This is very frustrating. I can understand Plantronics response. but they are wrong. I can control the loudness of music via the iPod application. I guess maybe this is just a hiccup I will have to deal with. I have placed a request to Apple that they fix this. Maybe in the next upgrade they will, or at least add an option where you can adjust it in the settings.

Unable to use volume key

N95- cannot increase the volume using the volume key.is there any other way i can increase the volume of music on music player.
Message Edited by ashtraykid on 12-Aug-2008 01:18 PM

Have you tried using the volume control on the remote that's supplied with the N95?
If your volume key no longer works you should take it to a nokia care point for repair.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

IPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!

I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
I have changed the option under settings for the lock out to mute and back to lock out.
I have reset all setting
I have turned off and on
I have done are hard reset (holding the 2 buttons down).
I have erased everything and started all over reset.
I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?

Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.

Using volume control to work with MuVo MP3 Slim

I have a Audigy 2 ZS board with Creative T7700 speakers which work quite well. I also have a MuVo Slim MP3 player. The question is on the side of the volume control there looks to be a similar insert to a USB port. My instructions say I can use it with my MuVo but when I hook it up using the USB wire it does nothing. Does this work on only selected MP3 Players and if so I wish I knew before I bought this one. Actually it works excellent except for this feature.

william240,
I believe you are referring to the M-Port at the volume control. It's compatible with our MuVo NX player but not with MuVo Slim.
Jason

Unable to install volume controls / battery status software on A22m

I have a rather old ThinkPad - a A22m 2628-TSU - that I just recently reformated and installed with Windows XP.
I'm now trying to install the software that'll let you adjust the volume with the volume buttons and that'll show the batteries status and am having some difficulty doing so. I would have thought that Keyboard Customizer Utility for Windows 2000, XP - ThinkPad and ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad would have done the trick, but alas, it appears that they do not. I ran the *.exe that I downloaded, which created a C:\DRIVERS directory, and I then ran the setup files within each of the newely created directories, but that didn't help. So what will help?
Also, unrelated to this... whenever I try to visit lenovo.com, in Firefox, on that computer, the computer freezes. It doesn't do this in Internet Explorer and lenovo.com is the only page I've found that causes this problem in Firefox (well, the whole computer freezes, but it only happens while I'm using Firefox). I know this is a short in the dark, but... any ideas?

You need to install the Hot Key driver from the system utilities file matrix. (You may also need the on screen display utility also?)
re. the firefox, sorry I don't use it.
Message Edited by andyP on 12-24-2007 09:59 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Unable to use brand new Ipod Nano 3rd gen

I have just purchased an ipod nano 3rd generation. I had previously updated iTunes to the latest version available on my MacBook Pro (10.4.10)
Whenever I plug it in I get: "An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again"
I've done what it says to do, and I have rebooted etc.. it just won't work.

Hi thesquib,
Have you tried connecting your iPod to your computer in Disk Mode? Sometimes if an iPod is in disk mode it will be recognized better by the computer.
For instructions, see this article:
Putting iPod into disk mode
Also, did you try all of these five steps?:
The Five Rs
-Kylene

I am having problems with an older ipod running 1.1.2 firmware trying to use earbuds with volume controls made for ipod. any suggestions?

I am problems with an older Ipod classic running 1.1.2pc using earbuds with Ipod inline remote. The earbuds work fine with my new Ipod but not the older one. Any suggestions?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

ITouch 1st gen OS 3.1.2 - missing touch volume control

Does anyone know if apple has made it possible to upgrade the 1st gen iTouch to OS 3.1.2 without losing the volume controls? I have read some people saying that they are missing volume controls and others just forgot to plug in their headphones. Does the iTouch volume control work on a 1st gen? I really hope that I don't have to upgrade hardware to get the new OS. Any help would be appreciated. Also, is it possible to downgrade firmware to a version that supports touch volume, if it's necessary?

I tried restarting my iPod Touch by holding down the top button until it gives the option to power off. This didn't seem to help, as there was still "no volume available", however, when I moved the iPod Touch from the dock and plugged the jack directly into the port, the volume control reappeared immediately, and when I moved it back to the dock, it stayed present and is still there now. Earlier today, when I used my headphones, there was also "no volume available", so perhaps power cycling did help?

Ipod Touch Gen 1 and 3.1.3 volume control

Im pretty annoyed at the latest firmware upgrade, the completely removes onscreen volume control. and the ipod touch 1st generation has no side buttons for it, making this now impossible for me to change without going into an app that has volume in it.
Before it was bad enough because I could not double click my button to enter the volume control/song change quick menu unless music was already playing, but I got around it.
I'm pretty disappointed with apples lack of support for earlier versions. Not only that, but I can find absolutely no feedback forms for anything other than itunes and the website.

I seem to recall that this issue only exists when there is nothing plugged into the headphone jack -- if you plug something in then you should have volume control. I guess the problem would be if you use an FM transmitter, is that the case?

Updated ipod touch 3G to ios 5.0.1 and only have volume control with headphones doesnt work in bose dock anymore

I just updated my 3G ipod touch to ios 5.0.1 and lost volume control except when headphones are used, it will no longer work in my speaker dock, any suggestions?

- iOS 5 seems to have messed up connecting with Bose docks:
Re: iPhone 4 upgraded to iOS5, now Bose SoundDock not working
- Have you tried the standard fixes
--- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
--- Restore from backup
--- Restore to factory defaults/new iPod

Using remote control with iPod 5G - does it work?

I am trying to use my Video iPod with a cradle and remote control purchased at the same time from AppleStore in London. I can play, pause, cue, review, raise and lower volume; but the "menu" button seems to do nothing at all. I can't navigate around except by one song at a time! Am I missing something?
Cheers
PeteBell, UK

From the description of the remote on the Apple store.
"The Apple Remote offers play/pause, volume control and forward/back buttons."
The menu button is for use with "Front Row".

Can you control volume without using side controls?

Can you control the volume without using side controls?

Or, if your iPad is asleep/locked, double click the home button and you'll get an on-screen volume control and play/pause iPod controls (no need to unlock).

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on i

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on itunes, I even scanned the computer with Registry Easy but nothing worked. I use Mozilla Firefox and have a PC with Windows 7. Obviously, buying a ipod and being unable to use it for 3 days (and counting) because I am unable to register it, is pretty frustrating. Can anyone help?

Did you try all of this:
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.

I need small earbud earphones with a volume control for my IPod shuffle.

Can any of you tell me what company or companies make small earbud earphones with a volume control to use with my Ipod shuffle? The standard Apple earphones are too large for my ears and after about 30 minutes of use I have to take them off. I ordered some JLab small earbud earphones but now that they've arrived I realize they don't have a volume control.

Hey, I had the same problem when I first bought my Ipod. The issue is not with the Ipod its with iTunes, go to Preferences then Playback, change the volume on SOUND ENHANCER, I recommend the sound check but thats personal.
After you do that, connect your Ipod and go to settings uncheck maximum volume, and sync. I added memory for Ipod usage to make sure (decreases # of songs for ipod usage)
Good luck I hope this solves your problem it solved mine.

Unable to use volume control ipod itouch 5.1.1

Similar Messages

Maybe you are looking for