Unable to view a folder in InfoView

Hi,
A user is unable to see a folder in InfoView even though he is added to a Windows AD sub-group. The sub-group is nested to a parent Windows AD group and parent Windows AD group is added to this folder.
Other members in the group are able to view the folder, but not this member. When I checked the u201CMember Ofu201D property for this member, the Parent Windows AD group is not seen.
We are using Windows AD credentials for logon to InfoView and Business Objects XI 3.1 version.
Have anyone came across similar issue.
Thank you.

Hi,
Restart the CMS server once and test the issue again. Also refer the following SAP Notes:
SAP Note - 1328995
SAP Note - 1325901
Regards,
Nakul

Similar Messages

Unable to view PDF files in Infoview

I am unable to view pdf files in InfoView (Business Objects Edge Series XI 3.0)
When I select the pdf file from Infoview, I receive the message 'Do you want to save this file' which only allows me to save the document to a location on my computer.
Other users can view the file in Infoview, so it probably relates to a setting on my computer.
Any ideas?
Thanks

I've had a little look on Adobe's knowledge base; try this to check whether the issue is related with opening PDF in your browser in general:
"Determine if the web browser can open the PDF file from your local hard drive rather than from the web:
In the web browser, choose File > Open (or Open File).
Choose All Files from the Files Of Type pop-up menu (Windows)
Click Browse
Select the PDF file you saved in step 1 of task 5, and then click Open to open the PDF file. If Acrobat or Adobe Reader displays the file, but won't display it on the web, the web server has a problem serving the PDF file. Contact the webmaster of the site from which you downloaded the PDF file."
If so, try the troubleshooting steps mentioned here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328233&sliceId=2

Unable to view Logon page for Infoview after successsful installation

Hi,
After successfull installation of BO Edge series on windows 2008 server, i am unable to see logon details in infoview.
When i open with infoview URL, i can see only heading 'WELCOME TO BUSINES OBJECTS' in the page. I am unable to see
user id, password and authentication options. I also installed integration kit without any errors.
What else should i need to do , to get logon details.

see if [disabling IE enhanced security helps|http://blah.winsmarts.com/2008-4-Disable_IE_Enhanced_Security_Mode_in_Windows_2008.aspx]
Regards,
Tim

Unable to view /Developer Folder

Hi All,
I am using Macosx Lion. I dont know but after the updation of LION. I cant view some folders like "developer" which contains all the development tools.
Please tell m hoe to view the developer folder in macosx lion
Thanking you,
Bharath Ch

The normal permissions are that the owner (root) and admin group can read & write, while everyone else has only read permissions. There shouldn't be any other extended attributes or ACL entries.

Unable to view Public Folder Under Excel SpreadSheets in BO Explorer 3.1

Hi ,
I require to create Info Space using the data in an excel sheet. I am unable to configure the excel since the public folder is not present under the Excel Sheet option. Pls brief if this is got something to do with the version?
Thanks in advance!

Hi Priyank,
To find your audit reports:
https://service.sap.com/sap/support/notes/1389973
For more information on audit, have a look at this post which contains usefull information about audit
BOE XI R3 -- Auditing Parameters.
Regards,
Philippe

Unable to view windows folder

hi sir,
I am new to solaris ,i installed solaris 10 ,now i am facing one problem in accessing window's folders ,I can browse any machine but i am not able to see any folder of that machine It gives error message that u don't have permission to see that other machine has window 2000 and no one see my machine ,but they are able to ping my machine what is resion i dont know .
pls help my all work held up now

I am new to solaris ,i installed solaris 10
solaris 10 ,now i am facing one problem in accessing
window's folders ,I can browse any machine but i am
not able to see any folder of that machine It gives
error message that u don't have permission to see
that other machine has window 2000 and no one see my
machine ,but they are able to ping my machine what is
resion i dont know .Solaris does not have the ability to browse Windows shares. You can use the 'smbclient' tool to access shares , but this is an ftp-like interface

Infoview - unable to view report

Hi
I'm trying to view a crystal report (XI) through infoview. The report file is there, but when try to view it through infoview, i receive the following message:
Unable to retrieve Object.
Function expected
I've tried all of the different viewers to no avail and i can't find any help on the help files or on here hence the reason for my question.
Any help greatly appreciated
Craig

Hi,
To view the folder you have to give the root folder rights too not only on the folder where report is available.
You can refer the Admin guide for more information.
If you just want to view the report in infoview then you can add the created user to the Administrator group and then can view the report in Infoview.
-Noor.

Unable to view latest instance in BO Infoview XIR2

Hi,
I am unable to view latest instance in BO Infoview XIR2. Can any one please let me know general procedure to cross check in Infoview or Consol
Thanks in Aadvance
Regards
Sweety

Hi Sweety,
What happens if you login as the Enterprise Adminstrator account, do you get the option to View Latest Instance?
- What do you mean exactly when you say you cannot view the latest instance?
- Are you missing the option/context menu or is the incorrect report displaying?
I would suggest working with your Enterprise Administrator to ensure you have sufficient rights to View the latest instances. However, if you're not able to select the option check out this SAP Note:
https://bosap-support.wdf.sap.corp/sap/support/notes/1202260
Regards,
Wallie

Unable to view images in the crystal reports on a jsp

Hi folks,
I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
If anyone of you know how to fix it. Kindly post it. It's urgent.
PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

Hi Suresh,
Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
Add an entry in web.xml as follows ( if it doesn't exist)
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/<your application name>/crystalreportviewers115</param-value>
</context-param>
crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
-Aasavari

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Unable to view pdf created in Live Cycle Designer ES2-initially thought to be a user/OS issue

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

You're on to something KJ! Yes the form was created in LiveCycle Designer ES2 which came bundled with my Adobe X Pro. I began creating a new form yesterday and found that I could not preview the form, rendering this same "error" instead. I ran a repair on my Adobe and at first it seemed to fix the issue but after making some changes to the form I tried to preview again and couldn't. Here is what I get when I try to preview my forms in Designer ES2:
When I click the OK button, it then gives me that single static page as mentioned above in previous posts.
I searched Adobe yesterday trying to figure out how I could repair the LiveCycle Designer or if there was some sort of patch that I haven't gotten but was not able to find anything.
(Sorry for the delay in response, I've been on vacation.)
Message was edited by: AngelaC

Unable to view pdf - initially thought to be user / OS issue for new user to MAC.

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

Sorry, this is a user to user forum and we're just customers who help out when we can, so things don't always happen right away.
Reader, Regardless of OS or device, is as the name implies, only a Reader. There are different mail settings between Mac Mail Outlook and Thunderbird as well as Andsroid's mail app, whose name escpoaes me.
Have you checked in the Live Cycle Forum? There are people there with FAR more experience using LC developed forms. It's part of my Creative Suite, but I've never even opened it myself.

Unable to view pdf in safari

hello anybody can help- unable to view PDF files from the web

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to view images in my document in the new Maverick Pages!

Unable to view images in my document in the new Maverick Pages!
Opened an old doc which had about a hundred placed jpegs in it and when I opened it, Pages said that it wasn't including the background color nor the placed images. Why?

Hi Suresh,
Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
Add an entry in web.xml as follows ( if it doesn't exist)
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/<your application name>/crystalreportviewers115</param-value>
</context-param>
crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
-Aasavari

Unable to view client logs from sccm console

Hi
unable to connect to ccm and unable to view client logs from console. Console installed is on another server that is not site server
Regards Sushain KApoor

Hi
SCCM right click tools adds multiple ‘Client Tools’ entries
are comming when i right click on the clients. when i check for logs it shows client logs written only. More over when i try to connect to C$ i am able to connect to from console right click tools but when i go for connecting ccm folder it says no directory
found admin$\system32\ccm, but my machine is of 64 bit OS hence it should go to syswow64. any ideas how to resolve the same.
i am planning to go with
http://blog.danovich.com.au/2010/11/16/sccm-right-click-tools-adds-multiple-client-tools-entries/ this option
Regards Sushain KApoor

Unable to view a folder in InfoView

Similar Messages

Maybe you are looking for