Unable to view AdobeTV tutorials on Lightroom

I recently purchased LR 3 since I kept hearing rave reviews about it being more useful than PS.  However, I seem to have a stumbling block about getting started using it.
I was able to watch several of the PS CS4 tutorials, but have only been able to get a couple of the LR videos to actually work.  Most of the time they just hang with the three lights blinkling forever.  I am using WinXP SP3 with IE8 and 4 MB RAM.  I have the latest version of Flash (10.2) and have upgraded my Intel WiFi driver.  My download speed is about 1 Mb/s.
Is there anything else I can check or do to make Flash Player work consistently?

Hi, I'm bringing your reply that was posted to another thread:-)
I'm afraid that AdobeTV is the only place where I'm facing this restriction.  I can watch streaming Netflix videos and YouTube most of the time altho there may occasionally be some buffering.
The odd thing is that I can watch some of the tutorials, e.g. PS4, and others, especially Lightroom, hang consistently.  Could the Adobe server not be providing enough bandwidth?
I'm not sure on the bandwidth, since I'm not familiar with LR. There is something about AdobeTV that other users have trouble with. I'll see if I have anything on it.
Thanks,
eidnolb

Similar Messages

  • Unable to view tutorials on MAC 10.9 with Firefox

    Unable to view most of the tutorials. I only get a black screen. MAC 10.9 with Firefox. Thank you

    Atul,
    Photoshop CC tutorials:
    All of the sub folders:
    What is Photoshop CC? | Adobe Photoshop CC tutorials
    Remove a person from the background with masking | Adobe Photoshop CC tutorials
    Combine photos for group shots | Adobe Photoshop CC tutorials
    Make color and tonal adjustments | Adobe Photoshop CC tutorials
    Improving tonal quality with Levels | Adobe Photoshop CC tutorials
    etc. all of the sub folders of GET STARTED, LEARN ESSENTIALS, KEY TECHNIQUES, WHAT'S NEW
    Premiere Pro CC tutorials:
    same situation for all the Premiere sub folders
    Dreamweaver CC tutorials:
    same situation for all of Dreamweaver's sub folders
    As you have suggested I did switch to Safari and they work. Thank you for that. However, I would prefer Firefox if it is at possible.
    Thanks you kindly,
    Richard

  • Can't view adobetv after flash update

    I am having this problem now after today's flash update. I uninstalled flash and reinstalled it. I have checked settings, deleted my browser cache, deleted my flash cache before I uninstalled it, rebooted and reinstalled it. I am unable to view anything on adobeTV but I am able to view all youtube videos. Any suggestions?

    I am unable to reproduce the problem using Flash Player 11.7.700.202 on a Windows 7 62bit machine.
    When you uninstalled flash player, did you delete the following folders before reinstalling the latest version?
    C:\Windows\system32\Macromed\Flash
    C:\Windows\SysWOW64\Macromed\Flash (only in 64bit Windows)
    %appdata%\Adobe\Flash Player
    %appdata%\Macromedia\Flash Player
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  • Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

    I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

    Thanks Curt and 'Mylenium'
    I did re-set the prefs - but to no avail
    I checked and my graphics driver and audio is all up to date.
    No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
    Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
    Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
    Cliff

  • Unable to View Data in the table of a  CDC enabled Data Store.

    hi all,
    I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
    where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
    Can anyone help me out???
    is there any settings which we need to do, to see the data in a CDC enabled DS.

    any help ????

  • Unable to view streaming video

    I could view a streaming video using following address rtsp://138.133.71.2:554/file/ when using Quicktime 6. However, I have upgraded to Quicktime 7 Pro and I am now unable to view the streamed video. I am using Windows 2000 on a PC and streaming the video from a camera through a DSP Board to the PC. (The PC is not connect to the Internet)

    Download the Flash Player Uninstaller and Flash Player Plug-in (All other browsers) by right clicking and selecting "Save Link as".
    Close Firefox.
    Run the uninstaller.
    Run the installer to replace the plugin.
    Open Firefox and click Tools>Add-ons.
    Check under Plugins that Flash Player is "always activated".
    If it still won't load, check your other plugins. There may be an ad blocker that's preventing it.

  • Unable to View Data in using Adobe Reader (9)

    We are facing an issue in one of the scenario when we generate the pdf where the data needs to displayed month-wise in columns and months are more than 15 months then the report generates successfully but we are unable to view the data even though the data is available and we are able to select/copy the data using the select tool.By default the report is opening at 5.85%. But When we generate the report for the lesser number of months say (9) then we can view the data.

    You can chage your default context from Global to ABCD , whatsever name.
    Goto File menu ---> User parameters -->Default Context for Designer     
    Specify whatever value you want .

  • Unable to view data in the InfoCube as well as in the query

    Hi all,
    I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
    However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
    It looks to be a strange sitaution.
    Please help me out
    Regards
    YJ

    Hi,
    I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
    Refer the note: 353042
    And also refer the links:
    Re: Problem extracting 2LIS_03_BX into 0IC_C03
    Re: Records Not Added
    And also search this forum with "PROCESSKEY"
    With rgds,
    Anil Kumar Sharma .P

  • Unable to view the "Discovery Application" section under studio.

    Hello,
    I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
    I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
    However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
    But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
    Which is obviously used for creating and managing the applications.
    But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
    Can anyone kindly let me know why I am unable to view the discovery application section till now?
    Thanks.

    I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
    You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

  • Visual Studio 2010 Upgrade - Unable to view some reports

    I converted an application that had been developed in VS2005 so that it would run in VS2010.  The application contains several Crystal Reports.  Now when I debug the application I can only view some of the reports.  With the others I get an exception with the message "Unable to find the report in the manifest resources.  Please build the project and try again." 
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource.  I have tried removing a report from the project and then adding it back, but that made no difference.  A new report displayed fine. 
    Does anyone have any ideas about what could cause some of the reports to throw this exception?

    OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
    And here is what I posted to start the thread that I am replying to:
    I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
    Does anyone have any ideas about what could cause some of the reports to throw this exception?
    As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging.  I have also tried deleting a report and adding it back in but it made no difference.
    Is this enough information?

  • Photoshop Elements 8 - unable to view RAW files

    Hi.
    I have been using Adobe Elements 8 since it came on to the market. I use Canon Cameras and my latest one being a 1Dmkiv.
    When I got the Canon 1D I down loaded the appropriate RAW file I think it was 5.6 and followed the instructions and changed the Camera Raw.8bi file and it worked perfect and I was able to view and edit Raw files.
    Last week my computer failed and I have had a new hard drive and hence have had to upload all my software. I installed Elements 8 back onto the computer and reinstalled the photograph catalogues I had backed up within Elements 8 before the computer crash.
    When the photographs in the catalogues were viewed only JPEG files were visible, the raw files are shown as a a grey negative with a zig zag across them. I thought that I would have to upload again the lates RAW update, which I did and went through all the instructions as given by Adobe. I changed the Raw.8bi file within Elements 8 and I still am unable to view any Raw files within Elements 8. I desperately need access to these files. Any help would be appreciated
    Best regards

    Thanks so much for your reply. My problem appeared to be that most of the thumb
    nails had lost their links and I had to individually update the thumbnails from within the program. It wasn't a problem
    with the RAW file not being updated.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • Unable to view Service notification in CIC fact sheet

    In the Customer Interaction Center for Utilities(CIC0), I'm unable to view a certain service notification under a custom fact sheet. However, if I try to view it by accessing CIC from ECC, it is visible there. What could be the possible issue?

    It is working fine now. Actually I had some DML configuration data in the old DS and it got replicated in the new DS instance. So whenever I click on the ServiceConfiguration tab it tries get some config details about that service and ultimately fails to get so. When I deleted the entry in LDAP, I can see all the services available.
    --lakshmi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Unable to view images in the crystal reports on a jsp

    Hi folks,
    I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
    If anyone of you know how to fix it. Kindly post it. It's urgent.
    PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

    Hi Suresh,
    Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
    Add an entry in web.xml as follows ( if it doesn't exist)
    <context-param>
      <param-name>crystal_image_uri</param-name>
      <param-value>/<your application name>/crystalreportviewers115</param-value>
    </context-param>
    crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
    -Aasavari

  • Unable to view catalog after migrating from OBIEE10g to 11g

    Hi All
    I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g.
    Do I need to do something additional. Although I am able to login to repository.
    Thanks..

    Ideally it shud...can you try this tutorial with Sample or Paint objects ??
    http://howtobi.wordpress.com/2011/01/14/upgrading-obiee-10g-content-to-11g/

Maybe you are looking for