Unable to view alias on alternate Essbase hierarchy - Selecting POV

Hi All
I am just wondering if anyone is experiencing the following issue.
I am using version 11.1.2.1 and creating a financial report that connects to an Essbase database.
The issue is that I am unable to view the alias when trying to run the financial report via Workspace if I am looking a shared member (from the alternate hierarchy).
I can see the alias if refer to the base member I am unable view it when trying to select a member from the POV selection screen in Workspace.
I know I am able to do this in 11.1.1.3 but after upgrading to 11.1.2.1, I have lost the functionality.
If anyone can shed any light it would be most helpful. I have logged a case with Oracle support.
Thanks
JT

If you take the same retrieve and put it into the add-in, does it work?
I know, I know, a SmartView forum, so maybe you don't have the add-in. Could you write a report script/MDX query that duplicates the layout?
This:
The retrieve will then take over two minutes then return the following error:Makes me think that you've got some kind of horrific (hugely sparse and/or very complex) formula on that member and that's what's causing the failure.
You could, of course, just go into the outline and look at that member and see what's at that member.
Regards,
Cameron Lackpour
P.S. Two other threads to look at:
Partition query timeouts
Smart View Adhoc Analysis Issue
Is it possible that the db you are retrieving has a sparse calc per the first thread or is the target of a partition as per the second thread?
Edited by: CL on Dec 29, 2010 9:22 AM

Similar Messages

  • Unable to view Essbase App in Smartview

    Hello all,
    I am new to Essbase so I apologize if this is a silly question. I have created a new Essbase application but I am unable to view it in Smartview (using version 11.1). The Common Provider Connections does not refresh the list based on the new application. I know I created/deployed the app correctly (did this with help of Essbase person). That same person has not worked with 11 too much and could not help.
    However, I am able to see and connect to the application using the old Essbase Add-in.
    Do I need to trigger something else so the new application will show up in the Common Provider Connection list.
    Thanks,
    Darin

    Typically when you can't see an application in Smartview it is because you have your selector set to predefined or favorites. Change it to All and see if it makes a difference.

  • Unable to view complete Application Component Hierarchy.( Its Urgent)

    Hi,
      While creating Datasources with RSO2, I am selecting Application components, In the Application Component Hierarchy, I am unable to view the complete Hierarchy, ie subtrees are not available .
        Say Under PA-> PA-PA-IO is visible . ie All  subtrees are missing  under this application component, Including transaction data sources  under PA   and also Master Datasources  under PA-PA-IO. Like this all subtrees under  each application components are not visible.
        I have checked the Datasources delivered by SAP ie using RSA5 . Here all Application components are available including subtrees.
      I  have tried with RSA9 tried to transfer the Application component hierarchy but invain.
      Please help me in this regard. Its very Urgent.
    Thanks,
    Jaswantha

    You can rename your <JDev_Home>\jdev\system to <JDev_Home>\jdev\system_backup, f.ex.
    But it means you will lose your preferences, DB connections, ...
    Regards,
    Didier.

  • Unable to view alternate source org in PWB

    Hello,
    I have mutliple sourcing rule (Item-Org combination Sourcing rule and BOD) assigned to the item, which I am able to view in the assignment set in ASCP Instance after data collection. But I am unable to view alternate source org when try to release from PWB. On right click of planned order and navigate to items>sources it shows only one sourcing rule rather it should display mutiple sourcing rule.
    Can some one help me to reslove this issue.
    Thanks,

    Hello Sandeep,
    I have distinct sourcing rule in Item-Org sourcing rule and BOD. In Item-Org sourcing rule, I have make at condition and in BOD transfer from rule.
    With the above setup, planner will able to switch from Make to Buy or viceversa. As most of the time, if they are unable to produce they will source from intercompany thr IR-ISO process.
    Please let me know, if we require to modify the sourcing rule so that it will not result in to conflict.
    Thanks,

  • Unable to View/Create Hierarchy Version (0HIER_VERS) Variable in BEx Design

    Hi experts,
    I have activated 0HIER_VERS InfoObject together with its variable i.e. 0P_HVER from BI Content.
    I would like to use this version variable as a parameter to my Hierarchy Node Variable. However, in Variables > Hierarchy Node Variables > Variable Hierarchy Select Hierarchy Version > Version Variables, I am not able to view the Hierarchy Version variable, 0P_HVER or create any.
    May I know how to view the activated variable or create a new one?
    Thanks!

    Hi,
    from help on line:
    "A text node is a new, artificial term. Text nodes are special characteristic nodes for the artificial characteristic 0HIER_NODE."
    It seems that that this object is something like an artifice...
    Well I got the solution from one of the SAP notes, it states that often because of the inconsistencies in the RSDIOBCIOBJ table this problem occurs and the solution to this is to execute the RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
    Function module RSDG_IOBC_REORG
    Import parameter Value
    I_OBJVERS A
    I_PROGRESS
    I_IOBJTP *
    I_ALL_IOBJ X
    I_T_IOBJNM 0 entries
    I_BYPASS_BUFFER
    F8 -> Execute
    Refer Note 573421.
    This solved my problem. Just putting this up here if anyone in future come across the same problem.
    Thanks,
    Venkat
    Edited by: Venkadesh S on Nov 22, 2011 7:47 AM

  • Unable to view properties in DRM

    I created a property named 'Status' of localnode with 'Defined' property type. I added this to Essbase Property category. I was unable to view this property in DRM UI. Where as I can view this property in DRM database. Anyone can help me on this?

    open a node and then see the property. You will be able to see..
    have you defined any node types?

  • WVC80N - Internet Gateway UPnP discovery failure message \ unable to view over the internet

    I have the WVC80N.  I recently got the new Comcast modem \ wifi but the Wifi is junk and had a lot of problems (loss connection, range etc) so I had Comcast "bridge" it so I just use my old wifi (LinkSys E1200).   I have TZO to handle remote viewing.  Everything was working great for about two weeks and we had a power outage.  Since then, I have been getting UPnP discovery message (in the status tab of the WVC80N camera site) and I am unable to view over the internet.  I get a 502 error usually but today I got extra info: "The socket connection to www.dfgehring.mylinksyscam.com failed.
    ErrorCode: 10060.  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."
    I had Comcast do a "repair / reset" transmission to the modem and still get the problem.
    I found these step on the forum:
      1. Home Wirless Rounter administration page, find the UnPn settings and Turn off UnPn and save it. Wait for atleast 30 sec  and go the same page and Turn it back on.
      2. On your wireless camera Adminstraion page, go to "Options" and find the UnPn if it is already disabled go ahead and "enable" it also "enable" the "Alternate web connection" and save it. If it was already enable please disable it save the settings and enable back on.
     The above 2 steps resolved my issue and I could able to view my camera from outside of my home network.
    Still no luck.  Tried it several times.
    Could the power outage reset something on the modem or router to change this? 
    Thanks
    Darren

    That's what I thought. The power outage may have set the modem, router or camera settings back to factory defaults causing it to loose connection. First thing first, call comcast and check if the modem is still on bridge mode. The modem may have been set back to a modem/router mode due to power outage.
    You may test if the remote access is properly set up in the network by going to http://ping.eu. In that site, you will see your internet ip address, take note of that. Click on port check, enter your internet ip address and the port number you used in the alternate web access port then click Go. If it says closed, there something wrong in the settings of either the router or camera. In that case, I suggest you reset the router and camera and then reconfigure them.
    I found these articles online which could help you reconfigure your router and camera settings:
    How to set up your router
    How to set up router wireless setting
    Connecting camera to wireless network
    How to set up remote access on linksys camera
    How to set up TZO on the linksys camera
    Hope these helps.

  • The next level manager is unable to view or access appraisal forms for all

    I am facing an issue where in the next level manager is not able to see the appraisal docs of employees.
    Follwing is the link that we found on SDN related to the same issue-
    Next higher level manager should see the appraisal docs of the employees
    During the PM testing, an issue was discovered with the existing logic of the ‘Default Next Level Manager’ BADI.
    When a manager manually reports to a NL manager’s organization unit, the next level manager is unable to view or access appraisal forms for all the employees who report to the manager.
    For example,
    NL Manager/Cheif: Susan
    Manager/Chief: John
    Employees: Mary and Matt
    If John’s position (manager/chief) has a “A 999 Reports to dotted line” relationship to Susan’s organization unit (NL Manager), then Susan is unable to access, approve or reject the appraisal forms for Mary and Matt (John’s direct reports).
    The relationship type is A 999 – Reports to dotted line
    Type of related object – O (Organizational Unit)
    We need to update the BADI in order for the next level manager to be able to access appraisal forms as described in the example above.
    BADI implementation Name : Z_HRHAP00_DOC_DEF_DO
    Method - IF_EX_HRHAP00_DOC_DEF_DO~DEFAULT_OTHERS
    Now we are facing the following issue-
    After identification of the employees who report to the manager’s organizational unit using the  A 003 – ‘Belongs to” relationship we are not sure how to pass these employees information from BADI to appraisal form, so that the previously identified Next Level Manager will be able to access, accept and reject appraisal forms for these employees.
    For further details please refer the thread. I was not able to understand how this can be achieved.
    Can anyone please mention in brief how I should be able to do this. I am new to this and I would appreciate any help .
    Regards,
    Satish.

    There are no Function Modules to my knowledge. Pls try the transaction S_AHR_61016530 which would display the User's approvers as per hierarchy. This would bring datas from the HR tables. If this helps pls award points.

  • Unable to view iTunes Store purchase history

    Hi All,
    I'm unable to view my iTunes Store      purchase history. When I try to do so from within iTunes itself I am taken to a seemingly blank store page, which seems to have no content according to VOiceOver, Apple's built-in screen reader. I've previously done this without a problem, so am rather annoyed.
    Is there any alternate way of requesting a refund? Could I call and do so?
    THanks!

    You can use the 'report a problem' page to contact iTunes Support (generally unless there is a problem with an item e.g. app doesn't work as described, film doesn't play etc. then purchases are considered final) : http://reportaproblem.apple.com

  • Express Vi "Unable to view properties"

    I'm trying to create an express vi, but when I go to drop it on a block diagram I get the error: "Unable to view properties".  I've seen the online document
    "Placing an express vi causes 'unable to open properties' error" (http://digital.ni.com/public.nsf/allkb/9d2d226bb343372886256d6e007521f5
    Rebooting does nothing, and I've tried the vi on multiple machines, so it isn't something wrong with a particular installation or vi.lib.  I've looked through the vi hierarchy and didn't see any vi's that might have conflicting names as anything in the vi.lib\express\express shared folder. 
    Any suggestions?

    Interesting.  It was not what I expected.
    In editing your Config Page VI, it looks like you (probably accidentally) deleted an indicator that came with it.  There's nothing special about it other than its type, direction, name, and connector pane connection though, so it should be easy enough to fix.  It is required for the config page to launch, however. 
    On the main config page VI, do the following:
    Scroll down a bit to part that won't be visible to the user.
    Drop a new boolean indicator, I'd suggest a Round LED.
    Name this indicator "Data Valid".
    Connect the boolean wire coming out of your main event loop (indicates the OK button was pressed) to your "Data Valid" indicator.
    On the front panel, right-click the icon in the upper-right and "Show Connector".
    Connect your "Data Valid" boolean to the unwired terminal.
    Save the VI.
    That should get you up and going, good luck!

  • Erec -External Candidate unable to view headings in Job SearchFunctionality

    The problem with the user is that he is unable to view the entries under the following headings (Functional Area,Contract Type,Hierarchy Level) when he is logging in as  an External Candidate in Portal system in German language for the Job Search Functionality.Though the same scenario is working fine for user who is logging in English.

    You need to install whatever codec they are in onto your machine. FCE has a very limited arsenal of codecs.
    And the reason they are playing choppy is probably due to the drive the files reside on.

  • Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

    I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

    Thanks Curt and 'Mylenium'
    I did re-set the prefs - but to no avail
    I checked and my graphics driver and audio is all up to date.
    No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
    Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
    Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
    Cliff

  • Unable to View Data in the table of a  CDC enabled Data Store.

    hi all,
    I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
    where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
    Can anyone help me out???
    is there any settings which we need to do, to see the data in a CDC enabled DS.

    any help ????

  • Unable to view streaming video

    I could view a streaming video using following address rtsp://138.133.71.2:554/file/ when using Quicktime 6. However, I have upgraded to Quicktime 7 Pro and I am now unable to view the streamed video. I am using Windows 2000 on a PC and streaming the video from a camera through a DSP Board to the PC. (The PC is not connect to the Internet)

    Download the Flash Player Uninstaller and Flash Player Plug-in (All other browsers) by right clicking and selecting "Save Link as".
    Close Firefox.
    Run the uninstaller.
    Run the installer to replace the plugin.
    Open Firefox and click Tools>Add-ons.
    Check under Plugins that Flash Player is "always activated".
    If it still won't load, check your other plugins. There may be an ad blocker that's preventing it.

  • Unable to View Data in using Adobe Reader (9)

    We are facing an issue in one of the scenario when we generate the pdf where the data needs to displayed month-wise in columns and months are more than 15 months then the report generates successfully but we are unable to view the data even though the data is available and we are able to select/copy the data using the select tool.By default the report is opening at 5.85%. But When we generate the report for the lesser number of months say (9) then we can view the data.

    You can chage your default context from Global to ABCD , whatsever name.
    Goto File menu ---> User parameters -->Default Context for Designer     
    Specify whatever value you want .

Maybe you are looking for