Unable to view Citadel data, even though it is there.
I cannot view the traces with any method other that exporting them. Historical and Real-time trends give an error: Error 1. Invalid Data Type to Trend. The traces don't graph in MAX, but I don't get an error. I recently upgraded to version 8.2.1. This is an XP system. I detached and reattached the database. I registered the computer with the database. I can't think of what else to do. Help!
Brian,
While there is no way to actually bind the level of your alarm to a shared variable, you can change the level programatically.
The first way to do so would be to create a value change event on the variable that is storing the alarm levels. When this event occurs, you can then write the alarm level into a property node that references the variable that the alarm is enabled on. Thus the alarm level will change whenever the level variable is changed.
The second way would be to compare the two shared variables and set a user alarm instead of an alarm on the variable itself. I hope this helps.
Brian Coalson
Software Engineer
National Instruments
Similar Messages
-
I uninstalled Flash Builder 4.7 using the uninstall app. I'd like to re-install the app, but Creative Cloud says it's up-to-date, even though it does not exist anymore on my computer. How can I re-dowload it?
CC desktop lists applications as "Up to Date" when not installed
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html -
How to delete parent table data even though it has child records
hi all,
How to delete parent table data even though it has child records.
ex: delete from pa_request cascade constraints;
But this command is not working .
Regards,
P Prakash833560 wrote:
ex: delete from pa_request cascade constraints;cascade constraints is DROP table option. It can't be used with DELETE. You need to delete child rows first or drop foreign keys and recreate them with ON DELETE CASCADE. Then:
delete from pa_request will automatically delete child rows. However, personally I don't like ON DELETE CASCADE. You can, by mistake, delete half of your database without even realizing it.
SY. -
How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?
It sounds like maybe you installed a trial at some point in the past and trashed the application folder rather than doing an uninstall?
Have you tried the cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
10.7.3 does not show up on my system update and it says that all system is all up to date even though my mac is 10.7. all updates do the same thing.
thank youClick on the Apple icon (upper left-hand corner), select About this Mac, and post the OS X version number.
-
I have been using yahoo mails from iPad for several months. Today I am unable to access my mails even though I logged in to yahoo....the signin screen is keep coming when I tried to access mail.....is it due to iPad or yahoo?
It sounds like you might need to contact Yahoo! if you aren't able to setup your email account as a new account after deleting it.
I found some links on the Yahoo! website that might help:
http://help.yahoo.com/kb/index?page=content&id=SLN4138&locale=en_US&y=PROD_MOBIL E
http://help.yahoo.com/kb/index?locale=en_US&y=PROD_MOBILE&page=content&id=SLN261 7 -
I am unable to upgrade to Mavericks even though I seem to have all the requirements listed by Apple.
When offered the free upgrade in App Store, I am unable to upgrade to Mavericks even though I seem to have all the requirements listed by Apple.
Model: MacBookPro 2,2, Processor: Intel Core 2 Duo, Speed: 2,33 GHz, Processors: 1, Cores: 2, L2 Cache: 4 MB, Memory: 4GB
Bus Speed: 667MHz, Boot Rom Version: MBP22 00A5.B07, SMC Version: 1.12f5.10.7.5 is the max for your model. Your mac is one model too old to run anything higher.
-
When the ipod is ct isonnected to the mac itunes gives the message that there is an update to the os availible, when i click on update the message comes back that i tunes is up to date even though it was the update os button that was pressed, it is doing the same with my iphone, does anyone know where the conflic
The lates iTunes (10.5) requires Mac OS 10.5.8 or higher. You appear to be running 10.4.X. You will need to upgrade your Mac OS.
Stedman -
Unable to open numbers document even though it say newest version installed
unable to open numbers document even though it say newest version installed
Please review this information:
https://discussions.apple.com/docs/DOC-6991 -
I have a phone that is locked to a network and unable to change the sim even though this is my phone brought not locked
You only think you bought it not locked. It is locked to a carrier. Where did you buy it? The only legitimate place to buy an unlocked iPhone is directly from Apple. No other source is authorized to sell unlocked phones.
-
When I click on the "Get mail" icon, nothing happens even though I know there is mail. However, if I click on "send" and then go back to the Inbox, the emails start loading. What's going on?
Make sure your Mac's software is up to date.
Click your Apple menu top right in your screen.
From the drop down menu click Software Update. -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
-
Calls coming in as unknown even though I have there number saved
I broke my phone so using my mates Samsung Galaxy ace2 mini, but when people ring me it comes up as unknown even though I have there number saved.
Hi
Welcome to the EE Community!
Are you an Orange customer?
If so there is an ongoing issue with Caller Line Identity. This is what shows you the number of the person calling you.
The issue is currently under investigation.
Sorry for any inconvenience.
Thanks. -
Unable to view OLAP data in AWM
AWM Version : 10.1.0.4
Database Ver : 10.1.0.4
I have created a AW using AWM and created dims, cube and measures. I have loaded data into all dims using AWM and was able to view the data. However, after loading the cube, and when I use view data from AWM, I get no data, no message even after 20 minutes. I infact truncated the workspace and recreated the workspace. No use.
Any ideas where and what could be problem ?
The cube load went fine. I verified it from the table olapsys.xml_load_log table. I have couple of records rejected but that shouldn't cause this problem I think.
I tried to view the data from excel and have similar problem. I was able to select the measures I want to display and after that it just hangs there.
I would like to know if anyone has similar problem and what you have done to fix it.
Thanks in advance.
Prasad.Hi Prasad,
I have almost the same problem again with
AWM Version : 10.1.0.4
Database Ver : 10.1.0.4
I load data into all dimensions successfully as well as the cube.I can see the data in the Cube Viewer but when try too see the data in Spread Sheet Add-in in Excel it hangs.
Regards,
Maria -
Being made to lose unlimited data, even though I am paying full price???
I've been around and have been following the discussions/policies about those of us who have unlimited data and how we will lose unlimited data if we purchase a new device taking advantage of the discount pricing. I also know the workarounds of how to keep unlimited data but what I don't understand is this....
I have 3 smartphones, all have unlimited data. 1 of the 3 phones is eligible for an upgrade, 2 of them are not.
While signed into my account, I select the phone that is eligible for an upgrade and go into the ordering system. I select the new phone I want to buy and I have the option before adding the new phone to my cart to either: pay full price, or pay the discounted price. I chose the full price option (and this is the one-time full price, not the monthly payment plan option just to be clear) and then add the new phone to my cart. That's when I get a pop-up window that says my unlimited data plan is no longer available and that I would have to chose a new (capped) data plan. Without making any new choice in this pop-up window, I close the window. I then click through the various pages of the ordering system getting up to the point of reviewing my cart. And at the review cart/review order page, I also see that the system automatically removed my unlimited data plan and slapped on a 2gb individual (not family share) data plan.
So it would clearly seem that if an upgrade is available on a phone and even choosing to pay full price, and purposefully avoiding taking advantage of the upgrade price, the ordering system is all too eager to take that unlimited data plan away EVEN IF you chose the full price option, despite VZW's repeated statements that if you elect to pay the one-time full price you can keep your unlimited data plan. I tried seeking a clarification of this issue with an online chat representative through the chat button in the ordering process and the only solution from the chat rep was to just order the new phone and pay the full price on one of the 2 phones not currently eligible for an upgrade.
So what's your response to this VZW? I would appreciate a policy statement to these issues and this situation.So I went back into the ordering system today and did the EXACT same steps I did previously by making sure I selected the one-time pay-in-full price, adding the new phone to my cart and walking the ordering system all the way up to the cart and guess what....oh low and behold.....now after posting this message, I am not getting the system prompt I was getting previously about not being able to keep my unlimited data plan (even though I was very precise in confirming my first attempt was at the one-time pay-in-full price the first time which prompted my first post).
So I guess it was just cleaner and less publicly humiliating for VZW to quietly fix their ordering system then it was to acknowledge their ordering system was forcing customers off unlimited data even when the customer was trying to pay full price in one payment for a new phone despite the Company's very public and very on the record statements that customers choosing to pay the one-time pay-in-full price would be able to keep their unlimited plan.
Maybe you are looking for
-
Hi guys, I've got a simple stack working, but am having some problems with the input commands. Basically, the commands "empty", "pop", and "peek" are only meant to operate on the stack, not to be inserted inside it. They function on it and also opera
-
Setup of 11g database: configuration assistants failed
Hello, I have downloaded Oracle 11g from www.oracle.com and run installer in my Fedora 7 Linux (before doing it I prepared my system - accounts, kernel parameters). The problem is that during setup of database I got "Oracle Net"configuration error (i
-
Re: Ebuy Complaint - Not Shipping, October 2012 Or...
Same problems here with ticket FYHLQY. Adapter was purchased on Oct 20, 2012. Credit card was charged immediately. First response from eBuynow was on Nov. 2 stating that they did not have the adapter in stock. After a long process of exchanging infor
-
Installing Windows XP Pro on Promise 133 RAID
After much playing about heres the outcome. The crux seemed to be that I couldn't make the array active. FDISK on a boot disk told me that I couldn't make a disk active that was not the first. I looked at the the first and I found a 100Mb ATAPI ZIP d
-
Refresh document title on change
Hi! Does anyone know how to refresh document title on change? I have master.jsf with <af:document title="#{someBean.activeDocumentTitle}" id="documentRoot">In method activeDocumentTitle I get currently active tab, and get its title. Then I build acti