Unable to View Clause number when printed clauses

Hello,
I have set the profile option ''OKC:Use clause number is contract" to yes. Created Global clauses and approved them. However, when I print the clauses, the clause number is not displayed; only clause title gets printed.
Any idea why? Is there any other profile option that we need to set?
Thanks.

Hi Yvonne,
If it is set correctly in FITVFELD_WEB then I can only assume that it is probably set up as 'hide' in table V_T706B1_B for the expense types. Change it to 'Required' for one expense type and see if this works.
See the screenshot below.
Ankur

Similar Messages

Unable to view Object Gallery when clicked File - New Menu. why?

Hi,
I am using JDeveloper( ver 3.2.3 build 1018) on Windows 2000
recently installed and i access using Novell Netware.
After I create a new workspace and a new empty project, I try to
click on File - New ... to see the object gallery. But i am
unable to see the wizards and i get only an Empty page with OK
button disabled and Help and Cancel button enabled.
I have restarted my machine several times and There is no other
application other than JDeveloper running. But still problem
persists.
I do have 256MB Ram on my 40GB Harddisk.
I wonder if this is a problem due to
1. Insufficient Memory Space
2. Improper installation or configuration.
Can someone give a solution.
Thanks
Hari

Thanks for the reply. I would look into that. Both of the files
are there. I do not understand when you say to check the "file
is correct". All the object names and params within the file is
there and seems correct.
Is there any details specifically I have to look for?
This Unable to view Gallery happens when we continously try to
open the gallery 3-4 times and fifth time, Gallery doesn't
appear. When i close Jdeveloper and open again...it starts
showing the gallery. But again after few times, it disappears.
Anyway, I would look into my files as you said. Thanks for the
reply.
Thanks
Harihara Subramanian

Unable to connect india number when i call local r...

Unable to connect india number when i call local registered number. Pelase advise immediately.

Hello,
The service has been down for a short time today. Please try again and accept our sincere apologies for the inconvenience.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Unable to view download movies when in the air??

unable to view downloads when on the plane??

You might want to include a little more information such as the source of the download and the app. However, if you are referring to a movie purchased in itunes, yes, once downloaded you do not need WiFi to view. but it must be downloaded first.
To actually download or stream, you need a WifI connect that permits that. Most airline WiFi services block large file downloads and streaming.

WPF report viewer throws exception when print button clicked when hosted on winform

When hosted in a winform app the wpf report viewer control throws an exception when the print button is clicked.
All the other buttons appear to work, any ideas on a work round?
I have created a sample VS 2013 solution that shows this issue
As I can't even attach a renamed zip file it can be downloaded directly from here: http://1drv.ms/QxUrZo
The reason I am attempting to use this control is that the standard reportviewer causes occasional errors in citrix enviroments causing the citrix session to lock up. This appears to be a relatively common issue and the usual issue of both sides (citrix & crystal) blaming the other for the cause and me the developer needs to find a work round.
I've 'bodged' in an additional button on our app to export a loaded report to file as pdf then print it but this should not be the permanent resolution.
BTW glad to see the x64 dynamic parameter issue has been fixed at last, think I reported this over two years ago and again ended up having to work round it.

Hi Ludek
A sample project that loads a simple report is available from here: http://1drv.ms/QxUrZo
The project is called WPFReportHost
This loads a simple report when run then you can test the basic functionality of the viewer and all will work until you press the print button and then you get the application crash.
Have to improve my search technique when I googled for other people having this issue I didnt' find the link.
We've noticed the WPF viewer loads considerably faster and has better functionality than the winform viewer and hope that it might solve the citrix preview issue (yet to be tested).
So as a work round we've hidden the default print button added our own and call the report print directly as per below:
using (PrintDialog dialog = new PrintDialog())
     dialog.AllowCurrentPage = true;
     dialog.AllowSelection = true;
     dialog.AllowSomePages = true;
     dialog.AllowPrintToFile = true;
     if (dialog.ShowDialog() == System.Windows.Forms.DialogResult.OK)                     {
          reportDocument.PrintToPrinter(
               dialog.PrinterSettings,
               new System.Drawing.Printing.PageSettings(dialog.PrinterSettings);
                false);
Would be nice to have a fix

Purchase Order changing Sales Order Number when printing.

Hi all,
I have a client who is trying to print a Purchase Order and when they go to Print or do a Print Preview the Sales Order number changes from 2259 to 2264. The customer is using SAP Business 1 2005A SP01 Pl43. If anyone has heard of this or can help us out that would be greatly appreciated. Thanks!
Jeff Haldeman
Support One

Hi Jeff
That sounds strange .May be it is a bug .lets find out some of the issue before you log to sap support or patch upgrade .
1 Are you using formatted search . check the setup - if it is automatically refresh when field altered or changes,
--If that's the case , change it into display saved user -defined values .
give a shot and see what happens
Thank you
Bishal

With newest version of numbers how do you remove the page number when printing?

I have the newest versin of numbers, just downladed it and now i can't get rid of the page numbering when i go to print?? Please help

Thank You. That was so simple. Just in the other version you could just click it off. I appreciate the help

Unable to view Object Gallery when clicked File - New Menu JDevelop 10.1.2

I am using JDeveloper( ver 10.1.2.0.0 build 1811) on Windows 2000
when I click on CTRL-N the New Gallery doesn't appears.
Any suggestion?
Thanks

I found by myself the solution. In file ide.properties there are two var MainWindow.x and
MainWindow.y. If this vars have negative values the Gallery Window desappear.
Example:
MainWindow.x=-4 // wrong
MainWindow.y=-4 // wrong
MainWindow.x=68 // OK
MainWindow.y=51 // OK

Unable to view ext HDD when connect via wireless from mac to mac

Hi guys,
I have just recently started sharing files over wireless and until the other day I had no problems. That problem being - when I log on I cannot see any external HDD's attached to the computer Im connecting with. I have an iMac and a MacbookPro - both on Snow Leopard.
Has this happened to any of you? Its probably an easy fix, I just cant think of any settings I've changed to make this an issue...
Any help would be appreciated!
PS. I have checked that the HDD's are "ticked" as Shared and I can access them fine from the computer they're connected to.

Thanks Eric. I did all that previously but to no avail. I tried going through it all again and restarting everything and i mean everything (even the microwave). Maybe its just not meant to be! I have a friend with the previous version of the OS and his works every time!
Thanks for your help so far mate!!!
Cheers
DJ

Unable to view SQL Instance when install SP2

Hello All,
I am trying to update my version of SQL 2012 (Build 11.0.3128) to at least CU2, however whenever I try and run any update package (even up to SP2), I am unable to see my instance to upgrade. I can only see shared features. I am using a Named Instance.
SQL is running as expected, browser etc all are only and can be queried.
Am I missing something?
Thanks in advance,
Paul
Kind Regards, Paul Sanders | MCSE PC | MCITP EA, VA | MCTS SCCM/SCOM | My Blog: http://tameyourcloud.com

It looks as though I have resolved the issue... and it turns out to be a rather embarrassing PICNIC (problem in chair, not in computer) error.
My instance is x86 and my SP is x64. DOHHH!
Kind Regards, Paul Sanders | MCSE PC | MCITP EA, VA | MCTS SCCM/SCOM | My Blog: http://tameyourcloud.com

"Unable to view properties" Does someone knows how to fix it ?

Hello,
I am student, and during my internship I have to learn and use Labview.
I work on a Macbook (mac os X snow leopard 10.6.2).
I downloaded and install the latest version of Labview, in evaluation mode. At the beginning, everything worked very well, no problems and one day (I don't know why it happens ...) I experienced this trouble.
When I create a new blank VI, on the block diagram, right click, Express< Signal Analysis < Tone measurement,
So I put this one on the block diagram, and I get this error : "Unable to view properties".
When I try to open properties window (by double clicking on it), it's the same error.
And I get the same errors for all Express modules (except "Simulate signal" and "Create histogram") but only for the express modules.
I had read some forums about this problem, I give you their links :
http://forums.ni.com/ni/board/message?board.id=170&message.id=441921&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=222281&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=189243
For the second link, I can't try this solution because I have not found my Config page ...
Thank You
(and sorry for my english)

Yeah, I found any information in the Read Me document about uninstalling. But I found this on the web :
"To uninstall LabVIEW 2009, run the Uninstall.sh shell script file on the installation CD from a Terminal shell. The script prompts you to remove the files necessary to uninstall LabVIEW. If you want to keep any files you modified or added to the LabVIEW 2009 directory, save those files in another location before uninstalling LabVIEW 2009."
(at this location : http://www.ni.com/pdf/manuals/371778e.pdf )
The problems is that I have not the uninstall.sh file on the evaluation cd (I've done a research within it). I guess it's because it's a evaluation version...
I will ask my university to get their DVD, I have already their license number.
If someone who have a mac version can send me this file, it will be fix my problem.

Unable to view uploaded images

apex 4.0 using embeded listener
oracle 11g
as soon as i upload an image it doesn't display in the "shared components > images > edit image attributes" page.
the url looks fine:
http://127.0.0.1:8080/apex/wwv_flow_file_mgr.get_file?p_security_group_id=1473228310551932&p_fname=SF_Logo.jpg
is something wrong with my xdb permissions?

This won't be helping - your path to images is not correct:
file:///C|/Documents and Settings/Cindy Knight/My
Documents/Marketing/Chelan
Custom Homes/Website/Design/Website Live/images/home.gif
Brendon
"cindy__" <[email protected]> wrote in
message
news:fg5jun$dht$[email protected]..
> On this website www.actionmarketers.com/cch.html, I am
unable to view the
> images when the website is uploaded to the server, and
also an extra space
> appears after the navigation bar in Firefox (not IE).
Ideas?
>

Unable to view alias on alternate Essbase hierarchy - Selecting POV

Hi All
I am just wondering if anyone is experiencing the following issue.
I am using version 11.1.2.1 and creating a financial report that connects to an Essbase database.
The issue is that I am unable to view the alias when trying to run the financial report via Workspace if I am looking a shared member (from the alternate hierarchy).
I can see the alias if refer to the base member I am unable view it when trying to select a member from the POV selection screen in Workspace.
I know I am able to do this in 11.1.1.3 but after upgrading to 11.1.2.1, I have lost the functionality.
If anyone can shed any light it would be most helpful. I have logged a case with Oracle support.
Thanks
JT

If you take the same retrieve and put it into the add-in, does it work?
I know, I know, a SmartView forum, so maybe you don't have the add-in. Could you write a report script/MDX query that duplicates the layout?
This:
The retrieve will then take over two minutes then return the following error:Makes me think that you've got some kind of horrific (hugely sparse and/or very complex) formula on that member and that's what's causing the failure.
You could, of course, just go into the outline and look at that member and see what's at that member.
Regards,
Cameron Lackpour
P.S. Two other threads to look at:
Partition query timeouts
Smart View Adhoc Analysis Issue
Is it possible that the db you are retrieving has a sparse calc per the first thread or is the target of a partition as per the second thread?
Edited by: CL on Dec 29, 2010 9:22 AM

I am unable to view or delete Gmail since I updated to Firefox 3.6.10.

While using Firefox 3.6.10, I can go to the Gmail web site, but I am unable to view any emails when I click on them. I also cannot delete emails when I check the boxes and then click on the 'Delete' button. It worked just fine in Firefox before I updated to 3.6.10 from 3.6.8. I now have to use another browser to do Gmail which is my primary email.

I have the identical problem, and I intermittently (occasionally, rarely) get the infamous "this conversation could not be loaded..." message. There are a couple differences in my problem that may shed light on the solution:
1) I'm using Firefox v. 3.6.8 (the one you were using before 3.6.10)
2) My problem started immediately after Windows Vista updated with various patches & whatever was recommended. So maybe the conflict is Windows-caused (surprise!)
My (hopefully) temporary work-around is to use IE. Sigh.

Webaccess 8.2: Unable to view Attachments

Our users are unable to view attachments.
When trying to View a file the rendering file view window opens but all that is diplayed is a blank window. The attachments can be opened and saved.
The attachments can be viewed using the GroupWise desktop client on the same PCs used for testing.
Webaccess is running on a Windows 2008 r2 server.
The only document types that appears to be affected are those of MS Office 2003 and 2007.
I have tested using IE 8 and 9, Firefox and Chrome on both Windows XP and Windows 7 PCs.
I hope this is enough information.

That should be 8.0.2, dohh. :-[
We have two clustered webaccess servers. The active one has 6 process instances of GWDVA.exe*32 running and 1 each of
GWINTER.exe*32 and gwmta.exe*32.
Below are the relevant lines from the relevant ####web file in " :\WEBACCDM\wpgate\WEBAC80A\000.prc". As far as I can tell there is no error indicated.
03-21-12 12:25:38 ***** WebAccess Configuration Information *****
03-21-12 12:35:07 ...DM.xxxxxxPO.666661 Login
03-21-12 12:35:07 ...DM.xxxxxxPO.666661 List folders
03-21-12 12:35:07 ...DM.xxxxxxPO.666661 Open folder of incoming messages
03-21-12 12:35:11 ...DM.xxxxxxPO.666661 Open folder of incoming messages
03-21-12 12:35:22 ...DM.xxxxxxPO.666661 Read a message by ID
03-21-12 12:35:23 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:23 Viewed document: Text.htm User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:35:24 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:24 Viewed document: Text.htm User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:35:29 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:29 User Viewed document: xxxxxxDM.xxxxxxPO.666661 Document name unknown
03-21-12 12:35:29 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:29 Viewed document: TEXT.htm User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:35:33 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:33 Viewed document: TEXT.htm User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:35:43 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:43 Viewed document: Unit 11 Exemplar.doc User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:35:44 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:35:44 Viewed document: Unit 11 Exemplar.doc User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:36:37 ...DM.xxxxxxPO.666661 Read a message by ID
03-21-12 12:36:44 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:36:44 Viewed document: yyyyyy.docx User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:36:45 ...DM.xxxxxxPO.666661 Read attachment
03-21-12 12:36:45 Viewed document: yyyyyy.docx User: xxxxxxDM.xxxxxxPO.666661
03-21-12 12:37:03 ...DM.xxxxxxPO.666661 Logout
Tony

Unable to View Clause number when printed clauses

Similar Messages

Maybe you are looking for