Unable to view contact profile in BBM chat after upgrading software v5

Hi all
I did a software upgrade to version 5 on my curve 8520
Now i am unable to update status and profile pic on BBM chat also cannot view contacts profile pics
Please can someone advise how to resolve

Hiya!
 Just give it some time my friend. In some instances, it can take 24+ hours to re-sync with the BIS server and load everything. but it will do it on its own.
Cheers!
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Similar Messages

  • Unable to view contact photos during incoming calls after 7.1 upgrade.

    This was working fine up until the phone was upgraded on my 5s
    Has any one else had the same problem, and if so do you know of a fix?

    Same thing has happened to my wifes phone, upgrading to 7.1 on her 5s.

  • Z10 unable to view contacts

    Have a new Z10 and unable to view contacts, this is the case for migrated contacts or manually entered.  It appears that the contacts are on the Z10, since they show up as conflicts when using Blackberry Link sync.  Unfortunately the contacts don't appear on the device under any view setting including "All".
    Any suggestions?
    Thanks
    SB

    Other than "ALL", what other tabs do you have in your Contacts app?
    Also, do this, open your Contacts app.
    Swipe down from the top > Settings.
    In the "Show in Contact List" turn OFF all contact sources... turn off each one.
    Tap the BACK button at bottom left and can you see ANY contacts? Any that you seemed to be missing before?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to start Hyperion EPM Architect - Process Manager after upgrade

    Hi All,
    I'm unable to start Hyperion EPM Architect - Process Manager after upgrading from EPMA 11.1.1.3.0 to 11.1.1.3.03. I get the following error in the Event Viewer.
    Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database version mismatch:  Hyperion.SessionManager schema version is 9.5.0.0.0.10,  database schema version is 9.5.0.0.9.1.
    at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
    at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings)
    at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout)
    at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String jvmPath, String classPath, String ctgLibPath, String cssConnInfo, String hubHost, String hubPort, Boolean enableNestedGroups, String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean restorePastInstanceSessions, Boolean ...
    I've run through all the steps of patching EPMA ran the Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql script per the patch readme. But can't figure out where it's pulling the schema version number from. Any ideas?
    Thanks,
    Chuck

    Hi,
    you forgot to update the EPMA database. Last step in patching is:
    Now, you must run the database upgrade script before starting the process manager.
    Run the single database upgrade script that corresponds to your database vendor.
    Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    SQL_Server_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    DB2_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    The scripts are located in the following directory:
    %HYPERION_HOME%\OPatch\EPMA_11_1_1_3_01\files\products\Foundation\BPMA\Server\conf\
    hope that helps.

  • After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

    After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • Contact list not showing up after upgrade to iOS5

    Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

    My contacts were still in place after upgrading to 5, but I could not get into them.  Clicking on a name would just freeze the Address Book.   Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone.   That solved the problem for me. 

  • Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

  • Unable to view contact name in Contact Group on CX 600

    We have CX600 phones which are tethered over USB to computers. I created a contact group in Lync client with some external phone numbers and I edited their contact card to show up the names for them. When I go to view Contact groups on CX 600 I
    can see the group and I can see all phone numbers but the names do not show up? Should I be able to view names and then click on the name and view numbers?
    Please help
    Thank you

    Hi EddieBro,
    Did you use another CX600 phone to test the issue?
    If the issue still exists, I suggest you can refer to the following steps and retry.
    1. Create and modify the Contact Cards in Outlook.
    2. Add the contacts in Lync.
    3. Check the result in CX600 phone.
    Note: Please make sure the contact only has one contact card in Outlook and remove all double entries.
    Best regards,
    Eric

  • Unable to connect to the MS Exchange server after upgrading to ios 7.1.2

    I received a new iPad 4 through work.  Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server.  Contacted IT through work, they have no idea how to correct it.  They say all of my settings are fine.  The error message says "Cannot Get Mail   The connection to the server failed."  Any thoughts?

    Appears to be a wifi connection problem. Did it work prior to the iOS update?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Since it's a company wifi, you won't be able to do many of these.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to access application set in admin console after upgrade to 7.0 M

    Hi Experts
    I am unable to access the Application Set through BPC Administration after upgrading our development server to version 7.0 SP3. I followed the instructions as per the Upgrade guide, and there was no issues during the installation. But when trying to access the application set i receive the following error message on step 9  ( 9/10) of during the connection.
    Error message: Subquery returned more than 1 value. This is not
    permitted when the subquery follows =, !=, <, <= , >, >= or when the
    subquery is used as an expression.
    I have done all of the steps outlined as per SAP Note 1242962, but i still receive the error message. I tried to do a SQL Profiler trace, but i have been unable to find the query which returns more than one record.
    Any help is appreciated
    Kind Regards
    Daniel

    Interesting that you ask about upgrade vs uninstall/reinstall.
    We were running BPC 5.1
    We have also re-installed the Admin client to be the new version.
    We have been working with an outside consulting firm to manage our system upgrade/install.
    Our dev and qa environments were uninstalled then reinstalled.
    When we went to production, our system was intially upgraded.  I do not know why this route was chosen when that was not what was completed on dev/qa.  On our production 'upgrade', we are still working through issues. We then uninstalled iis, sqlserver reporting services, both .net 1.1 and 2.0, and the BPC application. Then reinstall everything and we were getting the same errors. 
    Our error was at Progress 10/10 Create Database Schema and check Application server collation.
    Error Message: Object Reference not set to an instance of an object.
    We are able to access the appShell and test copies of the appShell, we were not able to access any custom appSets which were created prior to the upgrade, nor are we able to access any appSets that were created as a copy of the custom appSet after the upgrade.
    When logged with SAP, we were directed toward note Note 1331040 - Cannot log into 7M Admin console after restore from version5 noting that we needed to do the following changes:
    Note that you will need to change the following:
    INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.112')
    INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.112')
    to
    INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.113')
    INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.113')
    The reason is because '7.0.113' means 7 MS SP04 while '7.0.112' means SP03.
    There are 8 steps in this note, for us, only the first 2 were needed. I have asked SAP to create new note/update existing accordingly.
    With the table entry, we were able to successfully access our app set.
    Hope our experiences can help you out.
    Thanks,
    Becky Zick

  • Unable to assign My Music as Custom Ringtone after upgrade 5.1.1

    I can play the music from micro sd. If I copy the song to the internal memory I can associate it to the contact.

    After upgrading to 5.1.1 I am unable to assign my mp3s as custom music to contacts. I can assign default ring tones but even if my mp3 seems correctly associated to a contact, when I receive a call the default ringtone plays. Does anyone have this problem?  Regards

  • IPhone will not synch contacts and calendar with Outlook after upgrade to 4

    I have been using an ACT! database on a PC for years, synching to Outlook with CompanionLink, and synching my iPhone to Outlook. After upgrading my iPhone to 4.0, I can no longer synch my contacts and calendar from Outlook. It "goes through the motions," appearing to be synching. But in the end, nothing changes. I have reloaded iTunes. The problem is between Outlook and the phone (the synch from ACT! to Outlook is fine).

    I'm having the same issue. Upgraded my 3G to OS4 which wiped out my contacts from the phone. I also use CompanionLink (Express) to sync ATC with Outlook and iTunes and the phone. Have spent hours/days on the phone with second level Apple tech support to no avail. CompanionLink IS syncing with Outlook but Outlook isn't syncing with the phone. Have tried syncing to Outlook directly (without CompanionLink) but no good result. Tried syncing through MobilMe. Can sync all Outlook contacts from my computer to me.com through MobileMe but does not sync with the phone. Tech support suggested trying to sync fewer contacts at a time as their might be a problem with the contacts file. DID manage to get 4000 of my 5600 contacts back in but can't get any more in. Previously had NO problem syncin all contacts directly and through CompanionLink. VERY frustrating.
    Also, I use Outlook Express for email. Since installing MobileMe I get an error message saying that Outlook isn't my default mail handler and I need to change the settings to make it the default mail handler. I DO NOT have "sync mail" checked as I'm not trying to sync my email accounts...only contacts and calendars. Made Outlook the default mail handler which stops the error message but still can't sync the contacts and I want to keep Outlook Express for email.

  • Unable to view the tables ONTIME_S and NARROW after ORE installation

    Hi,
    I could install R and Oracle R Enterprise server 1.3 on my machine successfully. I have also upgraded my database to 11.2.0.3. I am able to connect to database using ore.connect(). However, ore.ls() returns character (0) which means the ONTIME_S and NARROW tables are unavailable.
    Can someone please help me with this? I would appreciate if you can respond to my mail id [email protected], in addition to responding on this thread.
    Edited by: vahibg on Apr 18, 2013 11:15 PM

    vahibg,
    I've sent the ONTIME_S AND NARROW tables to your email address, along with instructions on how to load them.
    Sherry

  • Can't find BBM Icon after upgrade on Torch 9850

    Hello all
    I did an upgrade to my Torch this morning per a message to upgrade the BBM this morning and all looked like it went well and I restarted the device and NO BBM ICON..
    Can anyone help me? 
    I tried unhide, etc and I can't find it.
    I tried to redownload it but it says that it is on my device.
    Thanks for any help
    Solved!
    Go to Solution.

    Very sorry, I misread, as the AppWorld missing icon has been prevelant for many, and I jumped in with that solution too quickly.
    Do this,
    from your Options > Device > Application, scroll to and delete BBMessenger.
    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
    The, after reboot, using your BlackBerry browser, go to www.blackberry.com/bbm and download/install again.
    Again, my apologies for the initial misunderstanding.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can't edit my contacts on my iPhone 4, after upgrading to iOS 5

    After updating my iPhone 4 to the iOS 5.1.1, I can't edit my contacts or add any new contacts. Can anybody help me with this? Thank you.

    Try this:
    Settings>iCloud>Contacts>On...see if you can edit now...if so, you can go back into Settings & turn this off, if you like.

Maybe you are looking for