Unable to view dencrypted JEPG files! PLEASE HELP!

I made the mistake of encryping my files on my SD card on my phone when i first brought my BB Z10. I was trying to back up my pictures on my SD card to my computer using a SD card reader and then i was unable to to see them on my picture view on my PC. The message "files is unsupported....etc." came up so i decided that there could be an issue with my SD card which is disallowing me to use it on my computer (completely forgetting it was the encryption i had on my BB). So i decided to transfer/move all my data and files from my SD card to my computer (encrypted) and format my SD card. Then when it was formatted i transfered my files back on to the SD card and now i cannot view my pictures on either my computer or my phone.
Is there any possible way in which i can view my pictures again, i have not decrypted them but i still cannot see them. When viewing the properties of the files on my phone or computer it still say it has data (1MB for instance). They also do not have .REM after the file name.
Any advice would be greatful, Thank You.

Hi and Welcome to the Community!
Sorry...nope. Encryption on BB is a very secure system. What you have done has the result of now locking those files from visibility anywhere at all. They are lost.
Sorry.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to view corrupted word files, please help?

Can't view doc corrupted file .How to recover unsaved documents WORD? how to view corrupted word files, please help

It could be Word or even Windows that is having the problem. Before you start trying to restore a backup or repair a file, try opening other documents.
Try opening your "corrupt" document from another computer. Also you can try to make a copy of corrupted files. (It could work) : http://www.filerepairforum.com/forum/microsoft/microsoft-aa/word/968-i-would-be-grateful-for-any-help-to-repair-or-the-procedures-word-files
But if nothing helps, you can try to recover it by using DOCX Viewer Tool Download free demo versions of this software from website: http://www.docx.viewertool.com/ It’s
gonna help.

Unable to view and access files

Since updating to Yosemite on my MacBook Pro (early 2011), I have been unable to view and access files on my time capsule. I can still access my backups through Time Machine, but not able to view or access the files that I saved onto the device (by method of copy and paste from my laptop hard drive to the TM). Before the "upgrade" to Yosemite I used to open Time Machine, close it, and then the icon of the TM (just like a typical external hard drive) would show up on the desktop. I would double click and open the TM icon and be able to view all the files that I saved onto the hard drive of the TM, as well as a folder that said "Time Machine Backups." Now, all I see now is my MacBrook Pro Icon and a folder named "File Server." and when I double click on either icon there is nothing to view. Please help!

Try this..
Reset the TC to factory and redo the setup.. I strongly recommend the following setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. If you use ethernet also do it for ethernet.. this is important.
You can see the summary of the same thing from apple here.
OS X Yosemite: Connect to shared computers and file servers on a network
I have given somewhat more specific instructions which I believe are important.
With the TC manually mounted can you access the files??
If not please tell me and I will continue to think how to change permissions.
But please if you can at least open a directory and tell me what the permissions are currently set to.
eg. This is a directory on my TC.

After a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.

HT5467 Hi am unable to locate the SIM Tray please help me

Hi am unable to locate the SIM Tray please help me

SIM of an iPad is located about 2 inches from the bottom at portrait view (not landscape view) on the same side of the volume button.
Use a needle to poke into the tiny hole of the SIM tray. With one swift pull, you should be able to eject the SIM tray. It could fly off if you pull too hard. So be careful of your strength of pulling.

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Illustrator CS4 wont save files, please help?

You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
Thanks.
We are running CS4 on windows7 - yes PC!!!

We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
The files are saved over a network connection to a large external hard drive.
Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
Hope maybe you can help with any thoughts at all.
Cheers.
Date: Thu, 24 Jun 2010 03:41:40 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS4 wont save files, please help?
What file format do you save it in?
What kinds of changes did you make in that file?
Where do you save the file (removable or network media)?
>

Unable to view scanned PDF files

I registered for Adobe ExportPDF in February. Since then Adobe on my PC was upgraded, and now I am unable to view scanned PDF files. What can be done about this?
Thanks
Rika

Hi David
The update that was done in response to a prompt was done to 10.1.9. Something apparently went wrong, because when I uninstalled it and reinstalled 11.0.06 everything worked fine.
Thanks
Rika

Elements 7: Unable to view or edit files with extension cr2

Had to reload elements 7 after disk crash. Restored from backups. Unable to view or edit files with extension cr2

Unable to view or edit files with extension cr2
Which Canon camera model? Elements 7 is probably just too old to use the required Camera Raw plugin for your camera.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Camera Raw (the plugin used to read Raw files) is constantly updated to support new cameras as they come on to the market.

I try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

i try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

I am unable to review my apple id,please help me

i am unable to review my apple id,please help me

Hello sumitkkr,
Thanks for using Apple Support Communities.
I'm not sure what you mean by being unable to review your Apple ID. For Apple ID support, please visit the website below.
Apple ID Support
http://www.apple.com/support/appleid/
Take care,
Alex H.

Lost unsaved Garage Band File - PLEASE HELP

Lost unsaved Garage Band File - PLEASE HELP
I had an audio file made on Garage Band but it was unsaved. I left my computer on at night and for some reason this morning my computer had seemed tor restart. I opened the garage band file but nothing came up.
Is there any way I can recover this 'unsaved file'? It must be stored in cache somewhere.
Someone please advise.
Thanks.

I would just like to say Thanks to HangTime up there. This trick worked 100% ... I had recorded 8 or 9 rather long tracks; for an unexpected reason (first time I've ever seen the "gray screen of death") the popup window came up and in several languages told me I needed to restart the computer; did what it told me to, begrudingly. Came back online, opened the GB file, nothing was there. Yet, when I checked package contents for the file (which I didn't even know existed, compartmentalized "Media", until after reading this), there were the tracks! I owe you both for getting this up and running... album creds just may be in line. ~Matt

HT1222 The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

Go to appleid.apple.com. Log in with your Apple ID & password. Update your contact information.

HT4972 Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

That's usully symptomatic of a phone that was jailbroken or hacked to unlock it.

Unable to view dencrypted JEPG files! PLEASE HELP!

Similar Messages

Maybe you are looking for