Unable to View DSO objects while creating universe on SAP BW objects

Hi,
I am able to create universes on top of Cubes and Queries on any infoprovider but while making connections I am not able to see the DSO in the OLAP list.
I would like to know how to connect to DSO directly? I am able to view the queries based on DSO's but not just DSO's.
Please give me your inputs.
Thanks,
Shesha

Hi,
OLAP universes support DSO only exposed in BEx queries, not directly.
Data Federator will release a SQL driver to access SAP BW data that will provide a direct access to DSO.
DSO are not OLAP, that's why it is recommended to use a SQL access rather than a MDX access.
Didier

Similar Messages

Cnnection error while creating universe on Bex Query in BW

Hi
I am getting connection error while connecting to BW Bex query.
The error i am getting while creating universe is A runtime exception has occured Error getting levels for hierarchy dimension .....:Unknown error.
After this
Also while creating universe no key figures/measures are getting generated from Bex query to designer.
Also in Bex query which are created as mandatory variables comes as Prompts in webi.
But when I try to parse in Condition filter it is throwing error.
Currently that mandatory variable is From Date and To Date
Is we require to change the prompt syntax in Condition filter.
Also kindly suggest solution for Connection error as impemtation is getting affected.
Regards
Gaurav Mang

Hi
R u saying allow external acces in BEX query.This option in Bex Query designer.
Or In whether while creating universes under properties tab there is use of OLAP universes option has to be made to Yes.
This both things we have tried
Let me know any other option to be tried.
Regards
gaurav mang

GRC 10 Upgrade: Unable to find a system while creating a request in AC

Hi All,
I am unable to find a system while creating a new request in Access Management. I have created a connector to the backend system and I tested that by logging into the system remotely. However, the same system is not available for selection for which the request needs to be created.
Please suggest.
Regards,
Faisal

Hi Faisal,
Please re-visit the following config:
SPRO>GRC>AC-->Maintain Connector Settings
SPRO>GRC>AC-->Maintain Mapping for Actions and Connector Groups
SPRO>GRC>AC-->Maintain Plugin Settings (Make sure you have not checked the checkbox)
Still not solved - please follow this document and make sure you have completed all the steps:
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/5067e447-5c64-2e10-7d9c-8f7e5953aadb
Regards,
Ajesh.

How to create universe for sap bw cubes in Business objects

Hi all,
can anybody tell me the steps to create universe for SAP BW CUBES from Business objects software.
Thanks.
Cheta.

Hi,
In a SAP-BW and BO environment using Business Object Universe generator, it appears that BO requires direct data base connectivity to read data from BW.
In XI/XI R2 , it use an RFC connection (MDX driver, which makes BAPI, SAP API calls) to SAP BW to obtain the details of the BW Query or Info Cube for building the Universe using the XI/XIR2 Business Objects designer application. The request for the query or cube details is done VIA BAPI function calls. For the SAP BW Query we must have allow External Access to this query checked under the Query Property window.
Our Integrated Solution Kits do not access the SAP BWs data source.
Hope this helps,
Regards
CSM Reddy

Unable to find BW Query while creating connection with universe designer

Hi colleagues,
I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
Has anybody faced the same problem?
Thanks

Hi Ingo
SAP GUI               710 Patch 15
BI Components      7.10 Patch 1001
BW 3.5 Components     3.50 Patch 6
Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
I used massive regeneration for needed queries eventually,
BR Max

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

Unable to view the billing document created through vf01 tcode

Hi,
i'm unable to view the billing document which was created through vf01. when i want to display the document through vf03 it say document not created. As an abaper i'm not able to find any error..
Is there any configuration missed by the fn guy.

Hi,
While you are saving billing document i think you got Express document (please check in Transaction code SBWP :- Business work place of particular user). As per me the number range has completed for the particular document type(might be excise invoice also, if u have excise invoice auto generation functionality) that is why system is not able to update the invoice.
Hope this will be helpful
Regards
bvdv

Process to assign a project to view or table while creating in RPD

Hi All,
I am looking for option to assign a view to a particular Project while developing/creating RPD .
Background : Created a view in production using MUD environment last week and reports relying on the view is working fine.Yesterday when i accessed the same RPD for addding additional columns view is unavailable.When contacted Admin they said that view is not assigned to any project.(Right click on view and selected project which is showing zero objects)
Process i followed to create a view :
1) Right click in physical layer of my project and new physical table and then added the query(It is joined with multiple tables) and i didnt deploy view(Today only i understood it leads to bad performance when it is fired).
Also i imported a table for testing purpose even that table is not assigned to any project.
Requesting to explain how we can assign a project while creating view/importing tables
Thank you,
Avinash

Check your process again.!!
Refer to : http://docs.oracle.com/cd/E21764_01/bi.1111/e10540/devenvironment.htm#i1049458
Check : About the Multiuser Development Merge Process
Warning about added objects. When a person checks out a project, they have the ability to modify that project in any way and check it back in. Deletions and modifications are ways in which the integrity of the project is maintained. However, adding objects might introduce objects into the repository that do not belong to any project. Therefore, all project related objects are checked and if a new object is found, a warning message appears.
Caution:
You must add newly created metadata to the project definition in the master repository for it to be visible in future extracted versions of the project. For example, if a developer checks out a project, adds a new object, and then checks it in, the new object is not visible in extracted versions of the project until it is explicitly added to the project definition. See "Creating Projects" for instructions.
Mark if helps.!
Thanks,
SVS

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Unable to get the dataSources while creating the persistent stores.

Hi, While I am trying to create a persistent store (JDBC Store) I am unable to see the already created DataSources in the dropdown menu. I also tried creating new DataSource from Persistent Store creating screen but still could not see.
Following steps followed while creating DataSource.
Fill in the values for
Name, E.g.: JD-JDBC-Store.
JNDI Name – jdbc/JobDispatcherDS.
DatabaseType – Oracle
Database Driver - Retain the default selection
Click on ‘Next’
Click on ‘Next’
Fill in values for:
Database Name – SID of the Database
Host Name – The hostname/IP on which the Database is running
Port – DB Port
Database User Name - JOBUSER.
Password – JOBUSER
Click on ‘Next’
Click on ‘Test Configuration’ to ensure the correctness of the values. Got a success message on the screen.
Click on ‘Next’
Select your target server. E.g.: AdminServer
Click on ‘Finish’
Following steps while creating the Persistent Store
Clicked on New button. Select ‘Create New JDBC Store’ Option
Fill in the values.
name – E.g.: JD-JDBC-Store
Target server - admin Server.
data source - not able to get any to select from the DropDown.
Thank You,
Naresh.

Dear Rajesh ,
I am assuming your server is on Windows :
For Eg.
My SID is PRD and system number 02 and hostname prdserver then command should be execute like :
E:\usr\sap\PRD\DVEBMGS02\exe>jcmon pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS02_prdserver
Rest all are same :
In JControl Monitor Program - Main Menu :
Select : 20 : Local Administration Menu
And check the status of server0 process it shoud be up and running .
Regards ,
Santosh

Unable to view schema objects in awm

Hello,
I am using an oracle 10g database (10.2.0.1.0).
I have a schema with that roles : conect, resource, olap_user, olap_dba.
I have created dimensions, indicators, etc.. in that schema with enterprise mgr console.
I have created a worspace for that schema with awm (10.2.0.2.0A).
=> I can't manage to view the objects (dimensions,...) of my schema with awm.
And when I try to create a dimension with the same name than existing one in my schema, awm show this message "Dimension already exists".
Someone can help me ?
Thank you in advance,
Alex.

Hi Prasad,
I have almost the same problem again with
AWM Version : 10.1.0.4
Database Ver : 10.1.0.4
I load data into all dimensions successfully as well as the cube.I can see the data in the Cube Viewer but when try too see the data in Spread Sheet Add-in in Excel it hangs.
Regards,
Maria

Unable to find Par file while creating iview in the template

Hi All,
Iam trying to change the Masthead iview, i deployed in NWDS and successfull. but while creating iView in the portal i could find the par file in the template.
And when iam creating sample Portal application it is visible in template.
Setting in the NWDS are correct. Can any one suggest what is happening here.
Regards
DV

Hi DV,
don't try to create an iView from template, but one from par. In the list you'll find your project name and within the project - voila: your portal application.
HTH,
Carsten

Unable to add software components while creating track

Hi All,
While creating a track for ESS, when I try to add software components, I do not see the list of software components to be added. Any idea ??
Thanks,
Tom

Hello tom,
this could be because you have not performed the following step
You have not imported the SLD content. You can do this by going to http://servername:port/sld and login as a user who has SLD_ADMINISTRATOR privilieges. Then click on Administration and choose import (under the content section)
Hope that helps
Abdul

Metadata Reporsitory-- Unable to view the objects.

Hello all,
In the Metadata Repository, I am unable to view the target page, for example if i click "Info Cube" link, then that target page is not displayed, and the Main page remains there. I think, the target page is opening and disappearing.
Could you let me know any possible solution/reason for this?
Regards,
Ravi

I'm sorry, posted in wrong Forum.

Error while creating projects in SAP-PS from cProjects

Hi,
Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
1.Combination company / CO area is invalid Message no. KO124
2.Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
3.Only one error message is transferred from the log to the cockpit
Message no. IAOM_CPROJECTS029
I would like to request all to suggest in fixing the issue.
Thank you for your coopearation.
Regards,
Ranjan

Hi Ranjan,
If the companay code does not belong to the Co area, the system will certainly raise an error message. The question is, where do the values come from.
Woud you please check the customizing in ERP system, if you can find the inconsistence:
1. Customizing of the Proj.Profile under 'Create Project Profile' , SAP standard delivered is CPR0001, may be replaced by customer,
Which Co-area & company code are used. In Tab 'organization'
2. Which responsible Org.unit is maitained at involved cProject, to which co-area or company codes is this org.unit assigned.
3. If the Badi under the
Integration with Other mySAP.com Components ->
Collaboration Projects -> Controlling -> Business Add-Ins (BAdIs),
which set the org. information hardly via Badi method.
Kind regards,
Zhenbo

Unable to View DSO objects while creating universe on SAP BW objects

Similar Messages

Maybe you are looking for