Unable to View FDM Logs

Good morning all -
We are having an issue viewing our logs. When we go to Analysis --> Logs, we receive the following:
Error: Error code: -2146826252; Source: clsAppServer.fInitialize
Detail: Unable to connect to database. Please check database information and verify database is accessible.
We tried rearranging the PATH environment variables and that fixed the issue, but that broke our Essbase adapter. Any thoughts on or previous experience with this issue?
Any help is appreciated.
Thanks,
Sarah

You need to install the 32 bit ODAC Components for the Oracle Client on the FDM application server:
A) Perform a custom installation of the Oracle Client
B) Choose the 32 bit Oracle client home
C) Choose to install the following components:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET
D) Complete the install.
This should resolve the error message.

Similar Messages

Unable to view client logs from sccm console

Hi
unable to connect to ccm and unable to view client logs from console. Console installed is on another server that is not site server
Regards Sushain KApoor

Hi
SCCM right click tools adds multiple ‘Client Tools’ entries
are comming when i right click on the clients. when i check for logs it shows client logs written only. More over when i try to connect to C$ i am able to connect to from console right click tools but when i go for connecting ccm folder it says no directory
found admin$\system32\ccm, but my machine is of 64 bit OS hence it should go to syswow64. any ideas how to resolve the same.
i am planning to go with
http://blog.danovich.com.au/2010/11/16/sccm-right-click-tools-adds-multiple-client-tools-entries/ this option
Regards Sushain KApoor

Unable to view Administrator Logs

Hello,
I am trying to view the Netweaver Administrator Logs to Troubleshoot a Runtime Error on Production Portal. But when I goto http:<host>:<port>/nwa -> Monitoring -> Logs And Traces , then I select Default Trace Option or Last 24 Hours Option in the Dropdown, it displays the Message : ' No records to display '. The same when I do for QA Portal it displays the Logs fine. What is missing for Prod. Portal which is not allowing to view the Logs.?
Any help would be highly Appreciated.
Thanks.

Pls check with your basis team whether the configuration to write the logs and traces were configured. It will be st by default but there might be a chance to set it to "OFF". In that case you will not get any traces or logs.
Thanks,
Mahe

Unable to view IDS logs from cisco VMS server

Hi,
Pls help me out for viewing IDS logs from my cisco vms server (4th edition with SP2,java 1_4_1.02)
Configured IDS sensor with IDS MC (2.0.1) and updated signatures with latest sig files,
Configured Security monitor to view my IDS sensor and showing TLS was connected and cisco IDS REDP/SDEE,when viewing logs error was server codes need to be update., unreconiged last saved IDS alarms.
Pls give me the solution
Regards
Ajay

Hi Ajay,
when you upgrade to sec mon 2.0.1, the database is the same, but the formats are different.. you need to do somethings for converting these formats, which might take hours together, if ur database has too many events...
for information to convert the file format, refer to this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps3990/prod_release_note09186a0080386f72.html#wp1087204
see the section "Using the ConvertAndImport.pl Script after Upgrading from Security Monitor 1.2.3 to Security Monitor 2.0.1 "
do this and see.. let us know
Raj

Unable to View logs in SM21

Hello,
We are trying to display logs in SM21 and unable to view the logs. There are no entries displayed in SM21. On checking i found that proper read permissions are set for SLOG files.
Can anyone please help here.
thank you.

How many instances you have?, is it happening in the CI?..
Check that your Systme log and Central Logging parameters are correctly set,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c7/69bcbaf36611d3a6510000e835363f/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1f/8311d34bc511d189750000e8322d00/content.htm
Regards
Juan

Unable to view logs in SM21 older than one day

I am unable to view any logs in SM21 older than one day. What parameters need to be checked that would cause this? Thanks!

Hello,
please check this : rslg/max_diskspace_local & rslg/max_diskspace_central
http://help.sap.com/saphelp_nw70/helpdata/de/c7/69bcbaf36611d3a6510000e835363f/content.htm
thanks
ashish

Unable to view latest default trace in log viewer

Hello all,
We have NW 7.0 J2EE production server. We have a CI and two application servers.
Our SP level is SP18.
The DB is oracle and the operating system in RHEL 4.
I have a problem in viewing the default trace files in log viewer using the visual administrator.
I am able to view the old default trace but unable to view the latest trace data generated.
I am facing this problem when i try to view the logs of a particular application server.
Able to view the latest default trace properly for CI and the other application server. Problem lies only with a single application server.
I have also check the permissions in OS level for the trace files. Everything looks fine.
Could some one give me a clue on how to solve this issue.
Regards,
Chandru

Hello Joey,
The trace file isnt too big....
We have set the file size as 10 MB.
We have some 15 to 16 default trace files for each of the server process and we have 3 server process in that application server.
The ForceSingleTraceFile parameter is set as YES in visual admin.
So the logs will be displayed in visual admin as a single default trace file.
Hope I had provided the inputs you have asked...
Regards,
Chandru

Unable to view logging information on the context

Unable to see the ogging message on the user context on ACE,but able to view the logging on the Admin Context.
Admin# sh logging
Message logging:                none
Buffered logging:               enabled (level - debugging) maximum size 1048576
Buffer info: current size - 1048576 global pool - 1048576 used pool - 1048576
                min - 0 max - 1048576
                cur ptr = 916918 wrapped - yes
messages are displayed on the logging screen
production# sh logging
Message logging:                none
Buffered logging:               enabled (level - information) maximum size 0
Buffer info: current size - 0 global pool - 1048576 used pool - 1048576
                min - 104448 max - 0
                cur ptr = 0 wrapped - yes
on the production context cur ptr=0 and no message are displayedon the screen
not sure if I am missing any config

No logging message on ACE ,these are the commands issues on ACE
logging enable
logging fastpath
logging console 6
logging timestamp
logging history 7
logging buffered 7
logging monitor 6
This is the output I am getting
ace2/Admin# sh logging
Syslog logging:                 enabled
Facility:                       20
History logging:                enabled (level- debugging)
Trap logging:                   enabled (level - information)
Timestamp logging:              enabled
Fastpath logging:               enabled
Persist logging:                disabled
Standby logging:                disabled
Rate-limit logging:             disabled (min - 0 max 100000 msgs/sec)
Console logging:                enabled (level - information)
Monitor logging:                enabled (level - information)
Device ID:                      disabled
Message logging:                none
Buffered logging:               enabled (level - debugging) maximum size 0
Buffer info: current size - 0 global pool - 1048576 used pool - 0
                min - 0 max - 1048576
                cur ptr = 0 wrapped - no
ace2/Admin#

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

Unable to view the groups in Oracle Internet Directory

Hi Experts,
We have created groups in ContentDB by executing the Groups.java program provided with cdbdevkit.
We could able to view the groups in ContentDB Web UI.
HowEver when logged onto OID....we are unable to view the groups.
How can i view the groups(Created in ContentDB) through OID.
Thanks
parker.

Hi Experts,
We have created groups in ContentDB by executing the Groups.java program provided with cdbdevkit.
We could able to view the groups in ContentDB Web UI.
HowEver when logged onto OID....we are unable to view the groups.
How can i view the groups(Created in ContentDB) through OID.
Thanks
parker.

Unable to cycle error log due to lock that will not clear

Hello,
Currently I'm having an issue with cycling the error log on two SQL Server Instances because the file is being used by another process. Simple I know but, when you try to kill the SPID it becomes hung and we are forced to restart the instance, which I want
to avoid at all costs. To give you some background we use sqldm for our monitoring of the databases and received a message that our Error log reached its max size threshold and to cycle the error log. When I executed exec sp_cycle_errorlog I'm told the following
message:
Msg 17049, Level 16, State 1, Procedure sp_cycle_errorlog, Line 9
Unable to cycle error log file from 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.1' to 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.2' due to OS error '32(The process cannot access the file because it is being used by another process.)'. A process outside of SQL Server may be
preventing SQL Server from reading the files. As a result, errorlog entries may be lost and it may not be possible to view some SQL Server errorlogs. Make sure no other processes have locked the file with write-only access."
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Then I ran the following query in instance A and found that sqldm had a active process.
SELECT *
FROM sys.dm_exec_requests a
OUTER APPLY sys.dm_exec_sql_text(a.sql_handle) b
WHERE session_id > 50
and session_id <> @@spid AND( text = 'xp_readerrorlog' OR text = 'sp_cycle_errorlog')
ORDER BY start_time a
Like I said before when I kill the SPID it became hung and remains in a rollback state (the process is not rolling back). My co-worker had this issue before on this same instance and contacted Idera for support, here was their response "The development
team provided an update regarding this case. After reviewing the code, SQLdm only reads the SQL logs information in each collection and does not lock this resource. Given the behavior that you described, this could be a problem of SQL Server 2008"
I believe they're right because we're only seeing this in these two instances. All other instances using sqldm are not reporting this problem which leads me to believe it is MS SQL Server causing it. This is where I'm stuck and that is trying to find out why
there is a lock on this file and for what reason. I used Process explorer yesterday to search for any processes that are using ERRORLOG through the Find DLL and Handle window and there were mulitple processes touching this file. When I looked today I'm seeing
now locks for this file and I still cannot cycle the error log. I ran the slect query above I'm still seeing sqldm SPID in both instances. I'm curious to see if anyone else has had this issue before whether they used sqldm or not. Any information will be helpful
in tracking this issue down.
Thank you in advance.
Process Explorer Search Results
Instance A
Instance B

Hi,
Generally, I use Process Explorer to find out which process is blocking the SQL Server from cycling the error log file. Open search box for ‘errorlog’ or dentify the entries with Handle or DLL as ‘your error log path’. There could be two
or more processes relating to that. One of them should be ‘sqlservr.exe’, and the others should be the culprits. Verify the process, and try to terminate it and then you should be able to run the stored procedure ‘sp_cycle_errorlog’ to cycle the
error log without restarting the SQL Server.
According to the images, there is no process found. I suggest you start the monitor and launch procexp.exe tool again and see if it makes any difference this time. If still no progress, I think you cannot avoid restating.
Thanks.
Tracy Cai
TechNet Community Support

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Unable to view table list in sql developer

I am able to connect to the database through sql developer but unable to view tables list.
Select query is displaying the contents though.
Any Help ???

Using SQL Developer, I log in using the owner user id and password. I can see all but one of my materialized views. It was definitely created by the user id I'm logged in as. A query of user_objects in sql+ shows all MVs, including the one that's missing in SQL Developer. If I log in using the same credentials in TOAD, the MV is displayed in the current schema, as I'd expect. The super weird thing is that if I use the previous version of SQL Developer, I see that MV! Any thoughts?
Edited by: [email protected] on Feb 25, 2009 9:19 AM

Unable to view purchase orders in SNC for the supplier

Hi folks,
iam facing the problem of unable to view purchase orders in the supplier portal for my supplier.
ECC 6.0, PI 7.0, SCM 5.0 are the systems being used.
scenario is like :
for plant 1000, purchase order is created on vendor 1100 and idoc sent to PI successfully
also in PI in the integration builder i find messages saying successfully sent to SCM system
SLG1 transaction in SCM says message received successfully, (in the log i can see the plant, supplier, order no and order details)
when i try to login to supplier view with supplier login, iam unable to view the orders,
please let me know if iam missing any thing in this regard.
cheers.

Hi Kiran
Could you check queues
smq1 and smq2 ????
Does your xml posted successfully in SNC(SXI_MONITOR)... Can you open the payload document
inbound message-payloads-maindocument
Check thoroughly whether any error information ????
Check whether commit of xml is proper, or else refresh PI cache
For your internet user and the xml rfc user(user who is pushing the data into SNC), check whether any update errors are available in so01(inbox)
It could be a temporary problem, deactivate activate your supplier service in SICF. Could be problem with binding issue
Just to make sure data is sitting in SNC
Check this table
/1OM/ORDR7MP3100
Give your po number in field order no
If you find, then it is problem with binding...If you dont find, then the xml update process has issue
Kindly let us know the results
Best Regards
Vinod
Best Regards
Vinod

Unable to connect: incorrect log on parameters. Database Vendor Code: 18456

I have imported a report into Info View (that has no parameters), I am able to run the report on Demand in InfoView, and I am also able to run the report within the CMC Preview. I have tried scheduling using the admin account in CMC, through the publishing wizard and also with a authorized users in InfoView. But anytime I try to schedule the report I get this error.
Status: Failed
Printer: The instance is not printed.
External Destination: Mail the instance to " XXX@XXX .com " with a subject of " test ".
Data Refresh Settings: Use the server defaults.
Start Time: 11/18/08 3:02:19 PM
End Time: 11/18/08 3:02:23 PM
Server Used: clr-combr.reportjobserver
Error Message: Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\clr-combr.reportjobserver\~tmp1304574d76168ca.rpt: Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 18456 ]
I have made sure that the Reportjobobject is enabled and the server for SMTP email is enabled, and I am pretty sure I have the properties set up correctly within there, we created a email account specifically for crystal. And that email account is also set up as a user. I don't know where else to look.
Please help.
Thanks

Hi Ashley
I would like to suggest you following things with the Report:
1) Please log in into CMC, go to Report which you want to schedule.
2) Click on the report and go to Process
3) Click on the tab Database.
4) There will be two option to make the entries for database logon required for the Report.
Please select the appropriate option. Are you able to Preview the report?
What is the database in use? Please also check the odbc driver settings for that database.

Unable to View FDM Logs

Similar Messages

Maybe you are looking for