Unable to view JCos in Content Administration

Hi,
I had created two JCos in Content Administrator, the message "JCo successfully created" was displayed for both....however they are Not visible in "Maintain JCo Destinations".
I can view these 2 JCos in SLD.
Could anyone let me know where the issue is.
Regards,
Siv

Hi,
In Maintain Jco destinations tab.. have you viewed all jco destination details. I think it should be there if it is created.
Regards,
Shanker

Similar Messages

  • I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

    I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
    Brian

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Unable to view external webcam content.  I'm using IE11 with Windows 7 64 bit.  I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

    Unable to view external webcam content.  I'm using IE11 with Windows 7 64 bit.  I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser.  I can play Youtube videos etc just fine. So why not the webcam?

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Unable to view some ESPNFC content on Firefox Beta23, probably Flash/JS issue?

    SO I am unable to view some ESPNFC.com Content(And a few other websites which i do not recollect at the moment) when i click on any new links from home page(No Image displayed)
    It works just fine on Chrome and IE-10, I am on the Beta Update channel (Version 23) and have tried the following:
    -Updated all plugins / uninstalled and installed Flash and Java Plugins
    -Reset Firefox , Started with safemode,uninstalled, removed all plugins like Flashblock and AdBlock
    -Tried everything from here: https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems
    - Also tried a variety of options from Google including updating About:Config etc etc, nothing seems to work
    I can provide a list of all my plugins if that helps but since i have tried removing all plugins/add on's and it didnt work I do not know if that would be of any help.
    I would have loved to post some screenshots to show the exact nature of issue, nevertheless it would be gretaly appreciated if any one help..
    I am using Lenovo(Ideapad p400 Touch) windows 8 machine and have had this issue since first day i got the machine.

    Just adding some screenshots for the issue on Firefox and working verson of the same on Chrome.
    One interesting thing i noted is the url changes on Firefox (adds a topid to the link ,bu chrome and IE keep the url as http://espnfc.com/?cc=5901 when i switch to the stories on the home page)
    Also, this issue only happens to the stories on home page, website seems to work fine on other pages.

  • Unable to view sent mail content

    Has anybody had the problem of not being able to view sent mail content in the sent mailbox? When a message is selected from list, the message "The message from XXXXXXX <[email protected]> concerning “title” has not been downloaded from the server. You need to take this account online in order to download it." when I try to view a sent message. This issue applies to all the sent messages in the sent mailbox, I can see a complete list of messages, just not the content?

    If this is a POP account and you’re running Mac OS X 10.3 (Panther), as your profile indicates, you probably have the problem described here:
    Overstuffed mailbox is unexpectedly empty
    If you’re just starting to experience the problem, doing what the article suggests might work. If you’ve let the problem to become worse over time, however, it may be too late to solve it as described in the article.
    Because of the differences between Mail 1.x and Mail 2.x, further discussing your problem here might confuse other users with apparently similar problems running Mac OS X 10.4 (Tiger), so please start a new topic in the Mail & Address Book - Mac OS X 10.3 & earlier forum, or just look for other threads discussing the same problem there. This is actually a FAQ in that forum.

  • Unable to view folio in Content Viewer... folio not loading

    For the last week I have been unable to load any folio and view it on the Adobe Content Viewer on my iPAD. This is getting very frustrating. I have tried rebuilding it. I have tried using properties, V27 and V28 - both unsuccessfully. This problem has been going on for over a week. I really don't know how to fix it and there is nothing that is understandable on the FORUM.
    PLEASE can an ADOBE STAFF member address this issue.
    I have deadlines to make it work, there seems to be a very great lack of communication from ADOBE on this issue inspite of what I am reading on the forum.
    I can build it in InDesign, but when I have the iPad Attached to my computer and I open the content viewer app nothing shows up. Also when I go on to Adobe's site it isn't there either.

    Our help topic on how to preview content is available at http://helpx.adobe.com/digital-publishing-suite/help/preview-folios-articles.html.
    If you are on a Mac the best way to do this is to use preview on device. The steps for getting that set up are in the article I linked to above. If you are on a PC you'll have to upload your folio to our servers before it'll show up in your content viewer. By default your folios will be created offline, but you can upload them from the Folio Builder panel flyout menu.
    Neil

  • Unable to view local HTML content from "Help Content Only" SSL  iFrame

    Hi
    Can anyone confirm whether it is possible to view local HTML files within an iFrame when generating Help Content Only SSL content which is also locally deployed?
    I have had no problem viewing local html files from within an iFrame with a locally viewed Browser-Based Help project but despite trying a number of variations on the syntax, I simply cannot obtain the same result from a Help Content Only SSL that is then incorporated within a merged help system. I can however create hyperlinks to view local content using the following syntax (file:/C:\folderName\fileName.html - the only drawback for local preview is that you must right-click and select "open in new tab"). Essentially, I am trying to eliminate the requirement to have to right-click and open in new tab to view local html files.
    The project I am working on is deployed both locally and remotely and this whole process is necessary for emergency management and business continuity purposes.
    I hope my explanation isn't too convoluted and would be glad to clarify it further if required. I would appreciate any assistance!

    Hi John
    I appreciate you and Peter obtaining this  information from Adobe and I appreciate your continuing patience in  trying to understand what I am doing.
    I will start  from the beginning and hopefully clarify my process when deploying my  application locally (my remote process differs somewhat but is not  germane to this discussion). Obviously this will contain some repetition from previous posts but I hope it helps...
    The project itself integrates content created from Adobe RoboHelp with content created within Adobe Dreamweaver
    First, I should mention that I am using RoboHelp 8 as I don't believe I have addressed which version I am using. There's nothing particularly unusual about the project itself.
    Utilizing Dreamweaver I have created a self-contained HTML-only (no server-side functionality) website which is placed at the root level of the C: drive
    Within the RoboHelp project I create a hyperlink to access the local HTML files from the RoboHelp topic pages. The process I use to do so is from within the HTML view of the specific topic page and I use the following file path: "file:/C:\folderName\fileName.html". The only end-user requirement is that they must right-click and select "open in new tab", otherwise the link does not work. Please note, this is ONLY required for accessing the local HTML files.
    I output my RoboHelp project using the Adobe Air SSL, with the output type set to "Help Only Content" which creates the .rha files. I utilize multiple .rha files within my project as each .rha file constitutes a module specific to an individual municipality (in my particular instance)
    I use the Help Viewer Wizard from the RoboHelp "Toolbox" pod to create what I refer to as the "shell" .air file. Once the "shell" .air file created from the Help Viewer Wizard is  installed, it creates a shortcut on my desktop.
    I place an XML .helpcfg file within the directory on C:Program Files where my "shell" .air file has been installed to reference each .rha module which must be placed at the root level of the C: drive in order to be properly referenced by the .helpcfg file
    By double-clicking on the desktop shortcut created in Step 6 it opens the "shell" module which, in turn, loads in each individual .rha file which can be accessed individually from the drop-down menu in the top-right corner
    Why do I do it this way?? My organization severely restricts admin privileges on our workstations. We have one IT person / several hundred officers so I needed to create a system where the only time we need IT assistance is in the initial installation of the "shell" .air file created from the Help Viewer Wizard and placement of the .helpcfg file within the C: Programs folder. Once this is done, because the .rha files are on the C: drive, I can swap these out and update as necessary (we currently have an annual renewal cycle) and we require no further IT intervention. The local system I have just described has hyperlinks to the online browser-based help so that users can also access it and see any content updates made throughout the course of the school year
    Having said all that, based on the model I have just described, I have been trying to create iFrames from within my RoboHelp 8 topic pages (placed on my C: drive) to access the local HTML Dreamweaver site (also on my C: drive). The problem I have been having is that the resultant iFrames display only a blank white page and I have tried a number of variations on the syntax of the file path without success.
    The process I have been using to create the iFrame is as follows:
    In Design view, select Insert >> HTML >> iFrame
    In the iFrame dialog box, provide a name for the iFrame and then navigate to the local file on my C: drive level Dreamweaver HTML-only website that I want to link to.
    Click "Apply" and from the resulting dialog box states that "This action will create an external link to the help system... Do you want to continue?", I click "Yes"
    The resultant file path is "../../../../../folderName/fileName.html" which obviously won't work but I have created the iFrame and now I switch over to HTML view and insert the file path that I have been using for the hyperlinks ("file:/C:\folderName\fileName.html"). I also modify the width to 100% and the height to 1000 px
    The user is not being directed to a different domain. So, if as Adobe states, that iFrames are "supported in local AIR Help (.rha) as well" then I don't know why it will not work for me. Again, this is the file path that allows me to create a hyperlink which will access my local Dreamweaver HTML files: "file:/C:\folderName\fileName.html" so if that syntax works for a hyperlink, why will it not work for the iFrame?
    The videos I referenced are also contained within the local Dreamweaver HTML site
    My usage of the term "merged help" may have been unclear and hopefully steps 1-8 outline what I am doing
    Again, I am very grateful to all who have joined this discussion to try to help me! I think it should be manifestly evident by now that I am self-taught and basically that's the only excuse I can offer in my defense for my poor articulation. Not too many years ago I wanted nothing whatsoever to do with computers!

  • Unable to view Songs in Content Screen in iTunes

    When I connect any Shuffle to iTunes, the Setting screen displays information accurately. However the Content screen is empty of any songs, even though the Setting screens shows that I have used up disk space for my songs. When I then try to add a new song, all the existing songs on my shuffle are erased and only the new song is now found when I play the shuffle. Why would this be happening?

    No. That is what I noticed. If they are in the library the contents of the shuffle display. When I remove them, the songs no longer display on the shuffle.
    When I use an iPod classic, I see the songs on my iPod, even though they are not in my libary. Its only in the shuffle that they seem to need to be in the library. Is this the way the shuffle works, versus the classic?

  • Looking for the doc to create Jco on content administrator.

    Please provid ethe docs.
    Please include the Java parameter related to Jco.
    Thanks!

    Hi Jennifer,
    check in these link what you need:
    <a href="http://www.i-barile.it/SDN/HowToConfigureTheJCoDestinationSettings.pdf">How To Configure The JCo Destination Settings</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm">Creating JCo Destinations</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm">Mantain JCo</a>
    PS: Reward points for helpful answers.
    Best regards,
    Gianluca Barile

  • HT1498 it takes foreverrrrrrr! to upload a movies from Itunes to my Ipad2 or Ipad3? Get errors that say unable to view movies or content cannnot be viewed? I e-mailed advanced support at Itunes and got no help?? Thanks D.

    Please, help with the question above about tne HUGE PROBLEM of uploading a movies to my IPADS.Thanks

    The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • Unable to view the contents in NQS Config file

    Hi Forum,
    After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
    So please guide me in resolving this issue.
    Regards
    Cool j

    You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

  • JCO connection in content administrator

    Hi All,
    I am doing a webdynpro Java application to call an RFC via webdynprpo java. After doing all the things. we created a
    JCO connection in content administrator. When we chose the Choose the JCO Connections tab, Two destinations named WD_FLIGHTLIST_MODELDATA_DEST and
    WD_FLIGHTLIST_RFC_METADATA_DEST are shown in this view and both of them have the status disabled. And the create button is also disabled. So we are not able to have a jco connection. What is this so? How can we bring the status enabled? What has to be done for this? Can anyone please provide solution for this?
    Regards,
    Divya

    Hi Divya,
    Are you logged in with Admin rights. try assigning the user to the ADMINISTRATOR group and then check whether it works or not .
    Did you configured SLD?..check the SLD connection is sucessful then only you can create JCO connection.
    Check this link for webdynpro content administrator:
    [Here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3d7db2e5-0601-0010-4a88-9f3498f8142f] and [Here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1]
    Regards, Suresh KB

  • Unable to create a test  via Content Management via Content Administration

    I am unable to create a test or survey via Content Management via Content Administration because insufficient privileges message. I create the folder and enter the test information for creating a test and then I after I click apply. I get message “You have insufficient privileges for the current operation. Please contact your System Administrator”.
    The System Administrator viewed the profile being tied to the responsibility and thinks there is no problem. Somebody please!!!!!!!!!!!!!!
    Help……

    Hi, James.
    If you add the main "Learning Administrator" role (UMX|OTA_LRNG_ADMIN), it will include all child roles for the Administrator, including the Learning Content Administrator, Learning Catalog Administrator, Learning Enrollment Administrator, Learning Finance Administrator, Learning Resource Administrator, and Learning Setup Administrator. If you don't have all of these roles, there are functions you will not have access to under the Learning Administrator responsibilities.
    The "Learning Instructor - Update" role only allows users that have the Learning Instructor Self-Service responsibility to update enrollment statuses for Learners that have attended classes that they are set as a resource for and won't impact the Administrator functionality.
    Anne
    Edited by: anne2 on Jun 5, 2013 2:09 AM (Fixed code for Learning Administrator role - Just noticed it was listed as the Enrollment Administrator role instead of the main Learning Administrator role)

  • My iMac is authorised to play iTunes content, but my Apple TV keeps asking for me to authorise. I am unable to view content from my iTunes Library. How can I convince my Apple TV that I am authorised?

    My iMac is authorised to play iTunes content, but my Apple TV keeps asking for me to authorise and I am unable to view content from my iTunes Library. How can I convince my Apple TV that I am authorised?

    I am not exactly sure what you mean by "authorised", but I am experiencing a similar problem...or the same, in that Apple TV keeps telling me to enable home sharing in my MacBook Pro. It does not seem to recognize that home sharing is already enabled on my Laptop.
    Is home sharing and "authorised" one in the same? It used to work just fine before these recent Apple TV updates.
    Apple TV, Mac OS X (10.7.2)

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Maybe you are looking for

  • Opening, closing, pushing apps

    My phone has been going crazy for over a month now. It would open apps on its own and it push anything and everything. When I first contacted customer service, they directed me to LG's customer service so they could just replace my phone. I sent it i

  • Zen Touch is de

    Hi. I've had my 20 GB Zen Touch for a year, and I've had problem after problem, all of which I've dealt with. However, now I'm totally stumped. One day, I just tried to turn it on, and nothing came up on the screen. However, the light on the power bu

  • Guide me to override the af:query component QueryListener property

    Hi All, If any one have sample application to override the af:query component query lisenere proprety, please share. I have the following requirement in search criteria. Field 1 Field 2 Field 3 Field 4 Field 5 Find Button Result section Validations o

  • Download and extract jar file from applet

    Can any one provide me a solution for my below problem. Thanks in advance for all the suggestions. I want my applet to download a jar file, extract into users home directory by creating a folder and then set the created folder to java library path. M

  • Help with the iHome?

    I don't know if this is the place to put this, but I saw another thread about the iHome in this section, so I just decided to go with it. There's that Play/Pause button on my iHome, and when i listen to my Nano (Version 1.0.2) I press that button to