Unable to view Messages under Cellular Settings

I am an iPhone user from the United States visiting the Netherlands for 2 months. I had planned on using iMessages to keep in touch with people back home. Unfortunately, since switching my Verizon SIM card out for an international carrier (World Sim), I have lost access to iMessages. Under the general Settings, when I click on iMessage and toggle the slider to 'On' I get the following: iMessage Unavailable. Turn on cellular data or use Wi-Fi to set up iMessage. However, when I go into my Settings>Cellular, I no longer even see Messages as an option. Suggestions!?

Hi John,
Thanks for the reply.
There was error with transport program. It is resolved now. You message helped though. I wish to assign points however the functionality seems to be missing to assign points. Will come back to this later in the day.
Thanks.
Message was edited by: Yogesh Baviskar

Similar Messages

Unable to view messages present in inbox/sent/draf...

Phone: Nokia N8
Unable to view messages available in inbox/Sent items/draft & even reports If i send a SMS to a group say group has more than 5 contacts and click on send button.
No message appears when i open sent items, reports or inbox after messages are sent.
To view messages again i have to restart my phone.

Well, I'm not exactly sure what happened but I think I've got it fixed for now.
FWIW, I went to Mail -> Preferences and clicked on the Accounts -> Advanced tabs. The "Enable this Account" box was checked just like always. I unchecked it, saved the changes, and exited Mail.
Then I went back to Mail -> Preferences -> Accounts -> Advanced, checked the "Enable this Account" box once again and saved the changes. Now it works just fine!

TS1717 I have downloaded a program but unable to view, message -50, I'm asked to verify my connection

I have downloaded a program but unable to view, message -50, I'm asked to verify my connection. The program started and then there was just audio, and then stopped completely

I have contacted the library staff and they said that I could go back and download again, this time into ITunes. However when I try, it says that since I've already downloaded it once, it will go into the same file this time (again onto my hard drive).

View Account under Cellular Data in iPad Air Settings not working

I purchased a new iPad Air with cellular last week and successfully established an account with Verizon on the iPad. Up until Saturday I was able to sign into View Account on the iPad in Settings and saw that my usage amount stayed current. I also was able to create a sign-on on the Verizon website and login with no problem up until Saturday. Beginning Saturday View Account on the iPad says my sign in credentials are incorrect. I know they are correct. Not only that the Verizon website says "the activity you are attempting is not available" when I try to sign there. Because Verizon is not offering unlimited usage I need to closely monitor because my teenagers have been using the iPad. I called Verizon and they blamed Apple and said contact them. This does not seem like an Apple issue to me. Anyone else experiencing this? If I go over my usage limit, it's expensive.

Yes I installed the MyVerizon app and returns an error.
I been searching around the Internet and everyone is saying that after you initially activate with one carrier on the iPad Air you can remove the SIM and replace with another from a different carrier. According to one article, Apple engineers included a wide range of bands for the iPad Air. Here's the article: http://gigaom.com/2013/11/01/ipad-air-with-lte-tip-you-can-switch-carrier-sims-a t-will/

Why my apps can't be disable on USE CELLULAR DATA FOR under Cellular settings

I came across an issue that my apps tend to stay on ( enable ) even when I disabled it manually, it will turn back on soon after, this can cause certain people data overage and extra data cost they did not expect. I always check my settings daily because I play with my phone numerous times a day so I noticed any changes or differences. So after I had done probably most people have tried, reset/restart the phone, check any latest OS updates, double check any settings, reset network settings, turn off and on data, turn on and off airplane mode, the conclusion is nothing. So I thought maybe i should try one app that I know kept turning back on when I disabled it, did the updates on the appstore, went back to the settings and I was able to turn on and off, tried the second app just to make sure my assumption works, updated the newest version on appstore, it works. So I decided to update all of the apps, then the problem is FIXED ! I hope this solve people's issue. Now I am able to manually disable and enable any app under USE CELLULAR DATA FOR,It was lucky guess for me and it work.

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

When i go on to hotmail on my iphone 4s i am unable to view messages in my subfolders which i have created. When i go on to my laptop and go to hotmail i can see them there. Please help

When i go on my iphone 4s and go to my hotmail I cannot see the messages in my subfolders which i have created, however when i go on my laptop and go into my hotmail the messages can be viewed there. i have seen some discussions and solutions on how to view them so I tried adding an account being the microsoft exchane i put in the required info and it tells me it cannot create account that an identical hotmail account already exists... i may have done something wrong the first time i tried and somehow it has my info but nothing has worked...Please help me.

Delete the account from you iPhone first (Settings>Mail,Contacts,Calendars>tap the account, tap Delete Account), then try setting it up as an Exchange account (see http://www.howtogeek.com/howto/32784/sync-hotmail-with-your-iphone-or-ipod-touch -with-exchange-activesync/).

Unable to view messages during transport request release

Hello ABAP Gurus,
I am trying to transport an ABAP program (from BWD to BWP - there is no BWQ here).
There are no activation or run time errors - I used ABAP program extented check and ensured that there are 0 errors and warnings for each of the checks.
However, when I try to release the request in BWD, I get error: test call of transport control program (tp) ended with return code 0212
I am unable to see this error and do not know how to proceed. Your help will be greately appreciated.
Thanks,
Yogi

Hi John,
Thanks for the reply.
There was error with transport program. It is resolved now. You message helped though. I wish to assign points however the functionality seems to be missing to assign points. Will come back to this later in the day.
Thanks.
Message was edited by: Yogesh Baviskar

Outlook Connector - Unable to view messages in IMAP folders

Hi,
I am trying to get the outlook connector (version 7.2.310.1) and it is fine for collecting mail, calenders etc.
The problem I am having is with IMAP folders.
I have a message rule set up through the webmail view that moves mail with [-SPAM-] in the subject (picked up by our edge filters) into the Junk Email folder. This rule works fine, I can view the messages in there through webamil, if i log in over IMAP using thunderbird or whatever I can see the messages...
The problem is that through the outlook connector, there are no messages in there. The folder exists, I can copy messages in there using outlook and they are visible, but all the mail that is there already is effectively invisible?
Any ideas or have I just missed something?
Josh

Hi,
I have a message rule set up through the webmail view
that moves mail with [-SPAM-] in the subject (picked
up by our edge filters) into the Junk Email
folder. This rule works fine, I can view the
messages in there through webamil, if i log in over
IMAP using thunderbird or whatever I can see the
messages...
The problem is that through the outlook connector,
there are no messages in there. The folder exists, I
can copy messages in there using outlook and they are
visible, but all the mail that is there already is
effectively invisible?Are the messages you copy via Outlook visible via IMAP (Thunderbird) or webmail?
Have you tried re-syncing the folder, to do this:
1. Within Outlook, right-click on the folder
2. Select "Properties"
3. Click on the "Advanced" tab
4. Click on "Empty and resync" button.
Regards,
Shane.

I am unable to configure 3G,in cellular settings I do not have "enable 3G"

Hi,I have an iphone 4S,I subscribed to 3G service,but cannot configure the service,because in settings>cellular I dont have enable 3G.
Need help to find a solution.
Thanks

The "3G" option in Settings > Cellular does not show up in all areas. (I don't have it either.) It also only shows up on GSM phones.
Just do Settings > Celluar = "On". That should suffice.

Unable to view messages in Mail

For some reason, I can't view any of the messages in my Inbox. There is a small number in the upper right corner of the Mail icon in the Dock which has always indicated a number of unread messages. When I open the Mail program, the same number of unread messages is listed in the Mailboxes column beside the Inbox, yet none of them appear when I click on the Inbox icon.
Any ideas??????

Well, I'm not exactly sure what happened but I think I've got it fixed for now.
FWIW, I went to Mail -> Preferences and clicked on the Accounts -> Advanced tabs. The "Enable this Account" box was checked just like always. I unchecked it, saved the changes, and exited Mail.
Then I went back to Mail -> Preferences -> Accounts -> Advanced, checked the "Enable this Account" box once again and saved the changes. Now it works just fine!

Unable to view messages in Nokia Communication Cen...

I have installed Nokia PC Suite 7.1.180.94, and want to upgrade my phone software - Nokia 6681 (I know its quite an old model!).
I am able to synchronize contacts (on memory card), and want to take backup of my Messages (in phone memory) before I upgrade - since everything will be cleanup after upgrade.
I'm not able to take backup, and not able to View any messages in Nokia Communication Center.
Plz HELP!

Well, I'm not exactly sure what happened but I think I've got it fixed for now.
FWIW, I went to Mail -> Preferences and clicked on the Accounts -> Advanced tabs. The "Enable this Account" box was checked just like always. I unchecked it, saved the changes, and exited Mail.
Then I went back to Mail -> Preferences -> Accounts -> Advanced, checked the "Enable this Account" box once again and saved the changes. Now it works just fine!

Unable to View Messages

I have been downloading and sending e-mails on my macbook for some time and suddenly I can no longer receive e-mails. I can see the new e-mails being downloaded in the activity monitor but they don't show up in the inbox. I can still send e-mails without any problem. I have the same e-mail account set up on my home imac and this is working fine. Any ideas?

Ernie,
First let me say thanks for you time and trying to help.
Yes, I do have an icon that looks like a mail tray inside my POP folder. When I click on the icon I get a file called info.plist. When I open this file there is just some incoherent data. The other icon in this folder is "sent messages.mbox" which is also looks like a mail tray. When I click on this icon I get a folder titled messages and inside are my sent items. These are the only items inside the POP folder. There are a number of other items inside the mail folder located in the Library. Do you need a list of all these items?

Unable to view the jms message

My prog is :
* To change this template, choose Tools | Templates
* and open the template in the editor.
package edu.ejb.model;
import java.io.Serializable;
import javax.annotation.Resource;
import javax.ejb.Stateless;
import javax.jms.*;
* @author BHAVIRISETTY
@Stateless(mappedName="demo")
public class MyIntfImpl implements MyIntf {
@Resource(mappedName="javax.jms.QueueConnectionFactory")
QueueConnectionFactory qcf;
@Resource(mappedName="myqueue")
Queue q;
QueueConnection qc;
@Override
public void insert(String id, String name) {
try
qc=qcf.createQueueConnection();
QueueSession qs=qc.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
QueueSender qsend=qs.createSender(q);
qc.start();
Customer customer=new Customer();
customer.setId(id);
customer.setName(name);
System.out.println(customer.getName()+""+customer.getId());
ObjectMessage om=qs.createObjectMessage((Serializable)customer);
System.out.println("before sending object"+om);
qsend.send(om);
qc.close();
catch(Exception e)
i deployed it in weblogic sucessfully but in adminconsole (Home >ID:<258017.1336030157018.0>;SystemModule-0!Queue-0:3 >JMS Modules >SystemModule-0 >Queue-0 >Summary of JMS Messages >JMS Modules >SystemModule-0 >Queue-0 >Summary of JMS Messages >ID:<258017.1336030710476.0>;SystemModule-0!Queue-0:6) i got like this
Unable to view message, reason = java.lang.ClassNotFoundException: edu.ejb.model.Customer
please let me know what i have to do in step by step approach.
Please reply me fast
Thanks!

I haven't looked at the code, but suspect that problem is that simply deploying the class is not sufficient, as the console class loader won't be able to find classes embedded in a deployment. The class likely needs to be in the system classpath.
A work-around might be to code your own browser tool in java or WLST scripting. I think we'll be releasing a white-paper on this type of coding in the within the next few weeks.
Tom

Unable to view MSS settings

I just added a windows 2008r2 server and trying to create a group policy. I am unable to view the MSS security settings. Is there a way to enable these settings?
Thanks
norman mattox

Hi,
I would like to confirm that how are everything going on,. If there is anything we can
do for you, please feel free let us know.
Best Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Yan Li
TechNet Community Support

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

Unable to view Messages under Cellular Settings

Similar Messages

Maybe you are looking for